commit 01d3c8417b upstream.
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076ede
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250801175423.2970334-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 084d2ac403 upstream.
Exercise various mmap(), munmap() and mremap() invocations, which might
cause a perf buffer mapping to be split or truncated.
To avoid hard coding the perf event and having dependencies on
architectures and configuration options, scan through event types in sysfs
and try to open them. On success, try to mmap() and if that succeeds try to
mmap() the AUX buffer.
In case that no AUX buffer supporting event is found, only test the base
buffer mapping. If no mappable event is found or permissions are not
sufficient, skip the tests.
Reserve a PROT_NONE region for both rb and aux tests to allow testing the
case where mremap unmaps beyond the end of a mapped VMA to prevent it from
unmapping unrelated mappings.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b024d7b56c upstream.
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e504 ("perf/core: Add AUX area to ring buffer for raw data streams")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07091aade3 upstream.
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec67 ("perf/core: Add pmu callbacks to track event mapping and unmapping")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5468c0fbcc upstream.
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e504 ("perf/core: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bee47cb026 upstream.
Scott Mayhew discovered a security exploit in NFS over TLS in
tls_alert_recv() due to its assumption it can read data from
the msg iterator's kvec..
kTLS implementation splits TLS non-data record payload between
the control message buffer (which includes the type such as TLS
aler or TLS cipher change) and the rest of the payload (say TLS
alert's level/description) which goes into the msg payload buffer.
This patch proposes to rework how control messages are setup and
used by sock_recvmsg().
If no control message structure is setup, kTLS layer will read and
process TLS data record types. As soon as it encounters a TLS control
message, it would return an error. At that point, NFS can setup a
kvec backed msg buffer and read in the control message such as a
TLS alert. Msg iterator can advance the kvec pointer as a part of
the copy process thus we need to revert the iterator before calling
into the tls_alert_recv.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: 5e052dda12 ("SUNRPC: Recognize control messages in server-side TCP socket code")
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 03537826f7 ]
This matches the timeout for tcp connections.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9 ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80f21806b8 ]
Commit 528589947c ("nvmet: initialize discovery subsys after debugfs
is initialized") changed nvmet_init() to initialize nvme discovery after
"nvmet" debugfs directory is initialized. The change broke nvmet_exit()
because discovery subsystem now depends on debugfs. Debugfs should be
destroyed after discovery subsystem. Fix nvmet_exit() to do that.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs96AfFQpyDKF_MdfJsnOEo=2V7dQgqjFv+k3t7H-=yGhA@mail.gmail.com/
Fixes: 528589947c ("nvmet: initialize discovery subsys after debugfs is initialized")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20250807053507.2794335-1-mkhalfella@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24eff17887 ]
Calling enqueue_reassembly() and wake_up_interruptible(&info->wait_reassembly_queue)
or put_receive_buffer() means the response/data_transfer pointer might
get re-used by another thread, which means these should be
the last operations before calling return.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9 ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdd7afc6dc ]
We should call put_receive_buffer() before waking up the callers.
For the internal error case of response->type being unexpected,
we now also call smbd_disconnect_rdma_connection() instead
of not waking up the callers at all.
Note that the SMBD_TRANSFER_DATA case still has problems,
which will be addressed in the next commit in order to make
it easier to review this one.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9 ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 047682c370 ]
In case of failures either ib_dma_map_single() might not be called yet
or ib_dma_unmap_single() was already called.
We should make sure put_receive_buffer() only calls
ib_dma_unmap_single() if needed.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9 ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24b6afc36d ]
There's no need to maintain two lists, we can just
have a single list of receive buffers, which are free to use.
It just added unneeded complexity and resulted in
ib_dma_unmap_single() not being called from recv_done()
for empty keepalive packets.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9 ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c015b7ac ]
Calling enqueue_reassembly() and wake_up_interruptible(&t->wait_reassembly_queue)
or put_receive_buffer() means the recvmsg/data_transfer pointer might
get re-used by another thread, which means these should be
the last operations before calling return.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe76fdbb9 ]
We should call put_recvmsg() before smb_direct_disconnect_rdma_connection()
in order to call it before waking up the callers.
In all error cases we should call smb_direct_disconnect_rdma_connection()
in order to avoid stale connections.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afb4108c92 ]
In case of failures either ib_dma_map_single() might not be called yet
or ib_dma_unmap_single() was already called.
We should make sure put_recvmsg() only calls ib_dma_unmap_single() if needed.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01027a62b5 ]
There's no need to maintain two lists, we can just
have a single list of receive buffers, which are free to use.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f320dfb0f ]
There are a couple of cases where the error is ignored or the error
code isn't propagated in ca0132_alt_select_out(). Fix those.
Fixes: def3f0a5c7 ("ALSA: hda/ca0132 - Add quirk output selection structures.")
Link: https://patch.msgid.link/20250806094423.8843-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b6a18f0da ]
Compile-testing IMX_MU_MSI on x86 without PCI_MSI support results in a
build failure:
drivers/gpio/gpio-sprd.c:8:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
drivers/iommu/iommufd/viommu.c:4:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
Tighten the dependency further to only allow compile testing on Arm.
This could be refined further to allow certain x86 configs.
This was submitted before to address a different build failure, which was
fixed differently, but the problem has now returned in a different form.
Fixes: 70afdab904 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805160952.4006075-1-arnd@kernel.org
Link: https://lore.kernel.org/all/20221215164109.761427-1-arnd@kernel.org/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e407fceeaf ]
Alex added page bias of LONG_MAX, which is admittedly quite
a clever way of catching overflows of the pp ref count.
The page pool code was "optimized" to leave the ref at 1
for freed pages so it can't catch basic bugs by itself any more.
(Something we should probably address under DEBUG_NET...)
Unfortunately for fbnic since commit f7dc3248dc ("skbuff: Optimization
of SKB coalescing for page pool") core _may_ actually take two extra
pp refcounts, if one of them is returned before driver gives up the bias
the ret < 0 check in page_pool_unref_netmem() will trigger.
While at it add a FBNIC_ to the name of the driver constant.
Fixes: 0cb4c0a137 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Link: https://patch.msgid.link/20250801170754.2439577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daa8af80d2 ]
Make vmem_pte_alloc() consistent by always allocating page table of
PAGE_SIZE granularity, regardless of whether page_table_alloc() (with
slab) or memblock_alloc() is used. This ensures page table can be fully
freed when the corresponding page table entries are removed.
Fixes: d08d4e7cd6 ("s390/mm: use full 4KB page for 2KB PTE")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffd2dc4c6c ]
TCA_MQPRIO_TC_ENTRY_INDEX is validated using
NLA_POLICY_MAX(NLA_U32, TC_QOPT_MAX_QUEUE), which allows the value
TC_QOPT_MAX_QUEUE (16). This leads to a 4-byte out-of-bounds stack
write in the fp[] array, which only has room for 16 elements (0–15).
Fix this by changing the policy to allow only up to TC_QOPT_MAX_QUEUE - 1.
Fixes: f62af20bed ("net/sched: mqprio: allow per-TC user input of FP adminStatus")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Maher Azzouzi <maherazz04@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250802001857.2702497-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce0b5eedcb ]
Hogan reported a vector setup race, which overwrites the interrupt
descriptor in the per CPU vector array resulting in a disfunctional device.
CPU0 CPU1
interrupt is raised in APIC IRR
but not handled
free_irq()
per_cpu(vector_irq, CPU1)[vector] = VECTOR_SHUTDOWN;
request_irq() common_interrupt()
d = this_cpu_read(vector_irq[vector]);
per_cpu(vector_irq, CPU1)[vector] = desc;
if (d == VECTOR_SHUTDOWN)
this_cpu_write(vector_irq[vector], VECTOR_UNUSED);
free_irq() cannot observe the pending vector in the CPU1 APIC as there is
no way to query the remote CPUs APIC IRR.
This requires that request_irq() uses the same vector/CPU as the one which
was freed, but this also can be triggered by a spurious interrupt.
Interestingly enough this problem managed to be hidden for more than a
decade.
Prevent this by reevaluating vector_irq under the vector lock, which is
held by the interrupt activation code when vector_irq is updated.
To avoid ifdeffery or IS_ENABLED() nonsense, move the
[un]lock_vector_lock() declarations out under the
CONFIG_IRQ_DOMAIN_HIERARCHY guard as it's only provided when
CONFIG_X86_LOCAL_APIC=y.
The current CONFIG_IRQ_DOMAIN_HIERARCHY guard is selected by
CONFIG_X86_LOCAL_APIC, but can also be selected by other parts of the
Kconfig system, which makes 32-bit UP builds with CONFIG_X86_LOCAL_APIC=n
fail.
Can we just get rid of this !APIC nonsense once and forever?
Fixes: 9345005f4e ("x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs")
Reported-by: Hogan Wang <hogan.wang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Hogan Wang <hogan.wang@huawei.com>
Link: https://lore.kernel.org/all/draft-87ikjhrhhh.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc5d59081f ]
A security exploit was discovered in NFS over TLS in tls_alert_recv
due to its assumption that there is valid data in the msghdr's
iterator's kvec.
Instead, this patch proposes the rework how control messages are
setup and used by sock_recvmsg().
If no control message structure is setup, kTLS layer will read and
process TLS data record types. As soon as it encounters a TLS control
message, it would return an error. At that point, NFS can setup a kvec
backed control buffer and read in the control message such as a TLS
alert. Scott found that a msg iterator can advance the kvec pointer
as a part of the copy process thus we need to revert the iterator
before calling into the tls_alert_recv.
Fixes: dea034b963 ("SUNRPC: Capture CMSG metadata on client-side receive")
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Suggested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Link: https://lore.kernel.org/r/20250731180058.4669-3-okorniev@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae8508b25d ]
Syzbot reported a WARNING in taprio_get_start_time().
When link speed is 470,589 or greater, q->picos_per_byte becomes too
small, causing length_to_duration(q, ETH_ZLEN) to return zero.
This zero value leads to validation failures in fill_sched_entry() and
parse_taprio_schedule(), allowing arbitrary values to be assigned to
entry->interval and cycle_time. As a result, sched->cycle can become zero.
Since SPEED_800000 is the largest defined speed in
include/uapi/linux/ethtool.h, this issue can occur in realistic scenarios.
To ensure length_to_duration() returns a non-zero value for minimum-sized
Ethernet frames (ETH_ZLEN = 60), picos_per_byte must be at least 17
(60 * 17 > PSEC_PER_NSEC which is 1000).
This patch enforces a minimum value of 17 for picos_per_byte when the
calculated value would be lower, and adds a warning message to inform
users that scheduling accuracy may be affected at very high link speeds.
Fixes: fb66df20a7 ("net/sched: taprio: extend minimum interval restriction to entire cycle too")
Reported-by: syzbot+398e1ee4ca2cac05fddb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=398e1ee4ca2cac05fddb
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Link: https://patch.msgid.link/20250728173149.45585-1-takamitz@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d46e51f1c7 ]
When sending a packet with virtio_net_hdr to tun device, if the gso_type
in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr
size, below crash may happen.
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:4572!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:skb_pull_rcsum+0x8e/0xa0
Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000
RSP: 0018:ffffc900001fba38 EFLAGS: 00000297
RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948
RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062
RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001
R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000
R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900
FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0
Call Trace:
<TASK>
udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445
udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475
udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626
__udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690
ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233
ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579
ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636
ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670
__netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067
netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210
napi_complete_done+0x78/0x180 net/core/dev.c:6580
tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909
tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984
vfs_write+0x300/0x420 fs/read_write.c:593
ksys_write+0x60/0xd0 fs/read_write.c:686
do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63
</TASK>
To trigger gso segment in udp_queue_rcv_skb(), we should also set option
UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv
hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try
to pull udphdr, but the skb size has been segmented to gso size, which
leads to this crash.
Previous commit cf329aa42b ("udp: cope with UDP GRO packet misdirection")
introduces segmentation in UDP receive path only for GRO, which was never
intended to be used for UFO, so drop UFO packets in udp_rcv_segment().
Link: https://lore.kernel.org/netdev/20250724083005.3918375-1-wangliang74@huawei.com/
Link: https://lore.kernel.org/netdev/20250729123907.3318425-1-wangliang74@huawei.com/
Fixes: cf329aa42b ("udp: cope with UDP GRO packet misdirection")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250730101458.3470788-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a81649a4ef ]
When the parent clock is a gated clock which has multiple parents, the
clock provider (clk-scmi typically) might return a rate of 0 since there
is not one of those particular parent clocks that should be chosen for
returning a rate. Prior to ee975351cf ("net: mdio: mdio-bcm-unimac:
Manage clock around I/O accesses"), we would not always be passing a
clock reference depending upon how mdio-bcm-unimac was instantiated. In
that case, we would take the fallback path where the rate is hard coded
to 250MHz.
Make sure that we still fallback to using a fixed rate for the divider
calculation, otherwise we simply ignore the desired MDIO bus clock
frequency which can prevent us from interfacing with Ethernet PHYs
properly.
Fixes: ee975351cf ("net: mdio: mdio-bcm-unimac: Manage clock around I/O accesses")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250730202533.3463529-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77bf1c55b2 ]
When gso_segs is left at 0, a number of assumptions will end up being
incorrect throughout the stack.
For example, in the GRO-path, we set NAPI_GRO_CB()->count to gso_segs.
So, if a non-LRO'ed packet followed by an LRO'ed packet is being
processed in GRO, the first one will have NAPI_GRO_CB()->count set to 1 and
the next one to 0 (in dev_gro_receive()).
Since commit 531d0d32de
("net/mlx5: Correctly set gso_size when LRO is used")
these packets will get merged (as their gso_size now matches).
So, we end up in gro_complete() with NAPI_GRO_CB()->count == 1 and thus
don't call inet_gro_complete(). Meaning, checksum-validation in
tcp_checksum_complete() will fail with a "hw csum failure".
Even before the above mentioned commit, incorrect gso_segs means that other
things like TCP's accounting of incoming packets (tp->segs_in,
data_segs_in, rcv_ooopack) will be incorrect. Which means that if one
does bytes_received/data_segs_in, the result will be bigger than the
MTU.
Fix this by initializing gso_segs correctly when LRO is used.
Fixes: e586b3b0ba ("net/mlx5: Ethernet Datapath files")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/netdev/6583783f-f0fb-4fb1-a415-feec8155bc69@nvidia.com/
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250729-mlx5_gso_segs-v1-1-b48c480c1c12@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffcfd071ee ]
The software node does not specify a count of property entries, so the
array must be null-terminated.
When unterminated, this can lead to a fault in the downstream cs35l56
amplifier driver, because the node parse walks off the end of the
array into unknown memory.
Fixes: 0ca645ab5b ("spi: cs42l43: Add speaker id support to the bridge configuration")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220371
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20250731160109.1547131-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9843cf7b6f ]
The step for TLV on tas2781, should be 50 (-0.5dB).
Fixes: 678f38eba1 ("ASoC: tas2781: Add Header file for tas2781 driver")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250801021618.64627-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fad6551fcf ]
Documentation/ABI/stable/sysfs-block states:
What: /sys/block/<disk>/queue/discard_granularity
[...]
A discard_granularity of 0 means that the device does not support
discard functionality.
but this got broken when sorting out the block limits updates. Fix this
by setting the discard_granularity limit to zero when the combined
max_discard_sectors is zero.
Fixes: 3c407dc723 ("block: default the discard granularity to sector size")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250731152228.873923-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2ba58ccc9 ]
Upstream commit 53889bcaf5 ("block: make __get_task_ioprio() easier to
read") changes the IO priority returned to the caller if no IO context
is defined for the task. Prior to this commit, the returned IO priority
was determined by task_nice_ioclass() and task_nice_ioprio(). Now it is
always IOPRIO_DEFAULT, which translates to IOPRIO_CLASS_NONE with priority
0. However, task_nice_ioclass() returns IOPRIO_CLASS_IDLE, IOPRIO_CLASS_RT,
or IOPRIO_CLASS_BE depending on the task scheduling policy, and
task_nice_ioprio() returns a value determined by task_nice(). This causes
regressions in test code checking the IO priority and class of IO
operations on tasks with no IO context.
Fix the problem by returning the IO priority calculated from
task_nice_ioclass() and task_nice_ioprio() if no IO context is defined
to match earlier behavior.
Fixes: 53889bcaf5 ("block: make __get_task_ioprio() easier to read")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250731044953.1852690-1-linux@roeck-us.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0105101288 ]
Module (SFP) eeprom GET has a lot of input params, they are all
mistakenly listed as output in the spec. Looks like kernel doesn't
output them at all. Correct what are the inputs and what the outputs.
Reported-by: Duo Yi <duo@meta.com>
Fixes: a353318ebf ("tools: ynl: populate most of the ethtool spec")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250730172137.1322351-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 123b7c7c2b ]
The SLCF bit ("stateless command filtering") introduced with
CEX8 cards was because of the function mask's default value
suppressed when user space read the ap function for an AP
card or queue. Unmask this bit so that user space applications
like lszcrypt can evaluate and list this feature.
Fixes: d4c53ae8e4 ("s390/ap: store TAPQ hwinfo in struct ap_card")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 528589947c ]
During nvme target initialization discovery subsystem is initialized
before "nvmet" debugfs directory is created. This results in discovery
subsystem debugfs directory to be created in debugfs root directory.
nvmet_init() ->
nvmet_init_discovery() ->
nvmet_subsys_alloc() ->
nvmet_debugfs_subsys_setup()
In other words, the codepath above is exeucted before nvmet_debugfs is
created. We get /sys/kernel/debug/nqn.2014-08.org.nvmexpress.discovery
instead of /sys/kernel/debug/nvmet/nqn.2014-08.org.nvmexpress.discovery.
Move nvmet_init_discovery() call after nvmet_init_debugfs() to fix it.
Fixes: 649fd41420 ("nvmet: add debugfs support")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2aa00e4f6 ]
Handle the case for v5.1 and v5.5 instead of returning "0.0".
Also reword the comment below since I don't see any evidence of such a
check happening, and - since 5.5 has been missing - can happen.
Fixes: 3aac8ec1c0 ("net: ipa: add some new IPA versions")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250728-ipa-5-1-5-5-version_string-v1-1-d7a5623d7ece@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb5ff63b3 ]
According to the 1588 standard, it is possible to use both unicast and
multicast frames to send the PTP information. It was noticed that if the
frames were unicast they were not processed by the analyzer meaning that
they were not timestamped. Therefore fix this to match also these
unicast frames.
Fixes: ab2bf93393 ("net: phy: mscc: 1588 block initialization")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250726140307.3039694-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2da4def0f4 ]
Paolo spotted hangs in NIPA running driver tests against virtio.
The tests hang in virtnet_close() -> virtnet_napi_tx_disable().
The problem is only reproducible if running multiple of our tests
in sequence (I used TEST_PROGS="xdp.py ping.py netcons_basic.sh \
netpoll_basic.py stats.py"). Initial suspicion was that this is
a simple case of double-disable of NAPI, but instrumenting the
code reveals:
Deadlocked on NAPI ffff888007cd82c0 (virtnet_poll_tx):
state: 0x37, disabled: false, owner: 0, listed: false, weight: 64
The NAPI was not in fact disabled, owner is 0 (rather than -1),
so the NAPI "thinks" it's scheduled for CPU 0 but it's not listed
(!list_empty(&n->poll_list) => false). It seems odd that normal NAPI
processing would wedge itself like this.
Better suspicion is that netpoll gets enabled while NAPI is polling,
and also grabs the NAPI instance. This confuses napi_complete_done():
[netpoll] [normal NAPI]
napi_poll()
have = netpoll_poll_lock()
rcu_access_pointer(dev->npinfo)
return NULL # no netpoll
__napi_poll()
->poll(->weight)
poll_napi()
cmpxchg(->poll_owner, -1, cpu)
poll_one_napi()
set_bit(NAPI_STATE_NPSVC, ->state)
napi_complete_done()
if (NAPIF_STATE_NPSVC)
return false
# exit without clearing SCHED
This feels very unlikely, but perhaps virtio has some interactions
with the hypervisor in the NAPI ->poll that makes the race window
larger?
Best I could to to prove the theory was to add and trigger this
warning in napi_poll (just before netpoll_poll_unlock()):
WARN_ONCE(!have && rcu_access_pointer(n->dev->npinfo) &&
napi_is_scheduled(n) && list_empty(&n->poll_list),
"NAPI race with netpoll %px", n);
If this warning hits the next virtio_close() will hang.
This patch survived 30 test iterations without a hang (without it
the longest clean run was around 10). Credit for triggering this
goes to Breno's recent netconsole tests.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/c5a93ed1-9abe-4880-a3bb-8d1678018b1d@redhat.com
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250726010846.1105875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 948b1fe120 ]
Commit a1fd37f978 ("md: Don't wait for MD_RECOVERY_NEEDED for
HOT_REMOVE_DISK ioctl") introduced a regression in the md_cluster
module. (Failed cases 02r1_Manage_re-add & 02r10_Manage_re-add)
Consider a 2-node cluster:
- node1 set faulty & remove command on a disk.
- node2 must correctly update the array metadata.
Before a1fd37f978, on node1, the delay between msg:METADATA_UPDATED
(triggered by faulty) and msg:REMOVE was sufficient for node2 to
reload the disk info (written by node1).
After a1fd37f978, node1 no longer waits between faulty and remove,
causing it to send msg:REMOVE while node2 is still reloading disk info.
This often results in node2 failing to remove the faulty disk.
== how to trigger ==
set up a 2-node cluster (node1 & node2) with disks vdc & vdd.
on node1:
mdadm -CR /dev/md0 -l1 -b clustered -n2 /dev/vdc /dev/vdd --assume-clean
ssh node2-ip mdadm -A /dev/md0 /dev/vdc /dev/vdd
mdadm --manage /dev/md0 --fail /dev/vdc --remove /dev/vdc
check array status on both nodes with "mdadm -D /dev/md0".
node1 output:
Number Major Minor RaidDevice State
- 0 0 0 removed
1 254 48 1 active sync /dev/vdd
node2 output:
Number Major Minor RaidDevice State
- 0 0 0 removed
1 254 48 1 active sync /dev/vdd
0 254 32 - faulty /dev/vdc
Fixes: a1fd37f978 ("md: Don't wait for MD_RECOVERY_NEEDED for HOT_REMOVE_DISK ioctl")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Link: https://lore.kernel.org/linux-raid/20250728042145.9989-1-heming.zhao@suse.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99765233ab ]
If the NFS client is doing writeback from a workqueue context, avoid using
__GFP_NORETRY for allocations if the task has set PF_MEMALLOC_NOIO or
PF_MEMALLOC_NOFS. The combination of these flags makes memory allocation
failures much more likely.
We've seen those allocation failures show up when the loopback driver is
doing writeback from a workqueue to a file on NFS, where memory allocation
failure results in errors or corruption within the loopback device's
filesystem.
Suggested-by: Trond Myklebust <trondmy@kernel.org>
Fixes: 0bae835b63 ("NFS: Avoid writeback threads getting stuck in mempool_alloc()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/f83ac1155a4bc670f2663959a7a068571e06afd9.1752111622.git.bcodding@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9acb237def ]
Currently, when the server supports NFS4.1 security labels then
security.selinux label in included twice. Instead, only add it
when the server doesn't possess security label support.
Fixes: 243fea1346 ("NFSv4.2: fix listxattr to return selinux security label")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Link: https://lore.kernel.org/r/20250722205641.79394-1-okorniev@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef93a685e0 ]
The function needs to check the minimal filehandle length before it can
access the embedded filehandle.
Reported-by: zhangjian <zhangjian496@huawei.com>
Fixes: 20fa190272 ("nfs: add export operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52d633def5 ]
There are common patterns in the kernel of using test_and_clear_bit()
before wake_up_bit(), and atomic_dec_and_test() before wake_up_var().
These combinations don't need extra barriers but sometimes include them
unnecessarily.
To help avoid the unnecessary barriers and to help discourage the
general use of wake_up_bit/var (which is a fragile interface) introduce
two combined functions which implement these patterns.
Also add store_release_wake_up() which supports the task of simply
setting a non-atomic variable and sending a wakeup. This pattern
requires barriers which are often omitted.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240925053405.3960701-5-neilb@suse.de
Stable-dep-of: 1db3a48e83 ("NFS: Fix wakeup of __nfs_lookup_revalidate() in unblock_revalidate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f06bedfa62 ]
When an applications get killed (SIGTERM/SIGINT) while pNFS client performs a connection
to DS, client ends in an infinite loop of connect-disconnect. This
source of the issue, it that flexfilelayoutdev#nfs4_ff_layout_prepare_ds gets an error
on nfs4_pnfs_ds_connect with status ERESTARTSYS, which is set by rpc_signal_task, but
the error is treated as transient, thus retried.
The issue is reproducible with Ctrl+C the following script(there should be ~1000 files in
a directory, client should must not have any connections to DSes):
```
echo 3 > /proc/sys/vm/drop_caches
for i in *
do
head -1 $i
done
```
The change aims to propagate the nfs4_ff_layout_prepare_ds error state
to the caller that can decide whatever this is a retryable error or not.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Link: https://lore.kernel.org/r/20250627071751.189663-1-tigran.mkrtchyan@desy.de
Fixes: 260f32adb8 ("pNFS/flexfiles: Check the result of nfs4_pnfs_ds_connect")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a2a6fc24 ]
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1010b4c012 ]
Multiple race conditions existed between the PCIe hotplug driver and the
EEH driver, leading to a variety of kernel oopses of the same general
nature:
<pcie device unplug>
<eeh driver trigger>
<hotplug removal trigger>
<pcie tree reconfiguration>
<eeh recovery next step>
<oops in EEH driver bus iteration loop>
A second class of oops is also seen when the underlying bus disappears
during device recovery.
Refactor the EEH module to be PCI rescan and remove safe. Also clean
up a few minor formatting / readability issues.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1334208367.1359861.1752615503144.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
