hix5hd2_dev_remove() calls netif_napi_del() before unregister_netdev().
This is not needed because free_netdev() deletes all NAPI instances
attached to the net_device.
Remove the redundant call and let the networking core tear down the NAPI
instance during unregister_netdev(). The probe error path still keeps its
explicit netif_napi_del(), because the device has not been registered
there.
Fixes: 57c5bc9ad7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Jiawen Liu <1298662399@qq.com>
Link: https://patch.msgid.link/tencent_5FFD37A252B4FEA6A80AD25B17C8E904F005@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The route4 classifier maintains a 16-slot fastmap cache that stores raw
struct route4_filter pointers indexed by (id, iif). The reader
(route4_classify) populates this cache via route4_set_fastmap() for every
classified packet that hits a filter. The writer (route4_delete,
route4_change) clears the cache via route4_reset_fastmap() before
RCU-deferred kfree of the filter.
This creates a UAF race:
1. Reader walks the RCU-protected bucket chain, finds filter f
2. Writer unlinks f, calls route4_reset_fastmap(), then tcf_queue_work()
3. Reader calls route4_set_fastmap() and writes f into the cache
*after* the writer's reset, caching a pointer about to be freed
4. After the RCU grace period, kfree(f) executes
5. Next classified packet on the same (id, iif) tuple hits the stale
fastmap entry and reads f->res from freed memory
Reproduced with an mdelay(100) accelerator in route4_set_fastmap() and a
concurrent add/delete stress test (provided by both zdi and Santosh).
Both triggered KASAN slab-use-after-free reports in the route4 fastmap
paths.
Fix:
Introduce a per-filter boolean dying flag to suppress stale fastmap
republishing by in-flight readers.
Fixes: 1109c00547 ("net: sched: RCU cls_route")
Reported-by: zdi-disclosures@trendmicro.com
Reported-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260729094411.46257-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have.
Fixes: f7458934b0 ("net: bridge: mrp: Update the Test frames for MRA")
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260729131941.10254-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT branch in
smc_llc_event_handler() stores an incoming qentry into the local LLC flow
without first checking whether a qentry is already pending. If a malicious or
buggy peer sends a second CONFIRM_LINK or ADD_LINK_CONT request while a flow is
active and flow->qentry is already set, smc_llc_flow_qentry_set() overwrites the
pointer without freeing the previous allocation, leaking one kmalloc-96 object
per spurious message.
The sibling SMC_LLC_DELETE_LINK branch already has the correct !flow->qentry
guard. Apply the same guard to the CONFIRM_LINK/ADD_LINK_CONT branch so that a
duplicate message when qentry is already occupied falls through to break and is
freed by the kfree(qentry) at the out: label, rather than silently leaking the
existing allocation.
The response direction (smc_llc_rx_response()) is unaffected: it already guards
with flow->qentry at the equivalent site and drops duplicate responses
correctly.
Fixes: 0fb0b02bd6 ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260729130153.970800-1-mjambigi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The x25 timers are armed with mod_timer() and cancelled with
timer_delete(), so a pending timer holds no reference on the socket and a
cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall
sk->sk_timer after __x25_destroy_socket() has passed its cancel point.
The following __sock_put() frees the socket while the timer is still
queued, and the next expiry uses freed memory. KASAN reports a
slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and
x25_timer_expiry() both reach the cancels from inside the timer they
would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer()
so that an armed timer owns a reference, and release it in both expiry
handlers. Rearm the heartbeat only while sk_hashed(sk) is still true,
since __x25_destroy_socket() unlinks the socket before dropping it. Arm
the deferred destroy timer the same way and drop its reference in
x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the
window recurs. With this patch the reproducer no longer triggers a
report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726220342.47245-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pdsc_check_pci_health() queues pci_reset_work when it sees a broken PCI
connection, and nothing cancels it. When the PCI core starts AER
recovery, pdsc_pci_error_detected() runs pdsc_reset_prepare() and
recovers the device, but a pci_reset_work queued just before is left
pending. If it runs after recovery released the device lock, it resets a
device the driver now considers healthy, bouncing the link for no reason.
Cancel pci_reset_work in pdsc_pci_error_detected() after
pdsc_reset_prepare(), which has already stopped the health thread so it
cannot requeue the work. cancel_work_sync() is safe under the device
lock here because pdsc_pci_reset_thread() uses pci_try_reset_function(),
which returns instead of blocking on the lock. Only PFs initialize
pci_reset_work, so guard the cancel with !is_virtfn.
Fixes: 81665adf25 ("pds_core: Fix pdsc_check_pci_health function to use work thread")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260714180223.1642792-2-nikhil.rao%40amd.com?part=1
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260727170030.361116-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d9407ff118 ("pds_core: Prevent health thread from running
during reset/remove") stops the health thread with cancel_work_sync()
before a reset, but a devcmd timeout during pdsc_fw_down() re-queues
health_work, so pdsc_health_thread() runs again mid-reset and double
allocates the core DMA queues via pdsc_fw_up().
Only the reset path is affected: on remove PDSC_S_STOPPING_DRIVER gates
the health thread and the workqueue is destroyed.
Use disable_work_sync() to cancel health_work and block further
queue_work() on it, and enable_work() in pdsc_restart_health_thread() to
re-allow it after the reset.
disable_work_sync() keeps a disable depth, so every disable must be
matched by one enable. pdsc_reset_prepare() stops the health thread and
pdsc_reset_done() restarts it. On the AER path pdsc_pci_error_detected()
calls pdsc_reset_prepare(), then pdsc_pci_error_resume() re-inits via
pci_reset_function_locked() (pds_core has no .slot_reset handler), which
runs the pair again - stopping the thread twice but restarting it once.
Gate the disable and enable on a health_stopped flag so each fires at
most once per stopped/running transition.
Fixes: d9407ff118 ("pds_core: Prevent health thread from running during reset/remove")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260727164548.359562-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is
deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring
ESW devcom lock without condition. In addition, in case of peer_flow,
__mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock.
This results in an AA deadlock.
To fix this, introduce a new PEER flag that is set on flows created as
peer flows (the duplicate flows on peer devices), and check it in
mlx5e_tc_del_flow() before acquiring ESW devcom lock.
Lockdep splat:
============================================
WARNING: possible recursive locking detected
============================================
Possible unsafe locking scenario:
CPU0
----
lock(&comp->lock_key#2);
lock(&comp->lock_key#2);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_deadlock_bug.cold+0xbd/0xca
__lock_acquire+0x1671/0x2ec0
lock_acquire+0x10e/0x2e0
down_read+0x95/0x430
mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core]
mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core]
mlx5e_flow_put+0x99/0x100 [mlx5_core]
__mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core]
mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core]
mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core]
mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core]
tc_setup_cb_add+0x1dc/0x470
fl_change+0x2f4d/0x626d [cls_flower]
tc_new_tfilter+0x79b/0x2310
rtnetlink_rcv_msg+0x778/0xad0
do_syscall_64+0x70/0x960
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Fixes: 04de7dda73 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260728044338.2271143-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work.
Fixes: 937317c7c1 ("enic: do hang reset only in case of tx timeout")
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260728062730.2394873-1-satishkh@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
packet_parse_headers() resets the MAC header only for a SOCK_RAW frame
whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket,
any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave
skb->mac_header unset here.
For frames sent via __dev_queue_xmit() this is harmless: it resets the
MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS
path uses dev_direct_xmit(), which does not, so the frame reaches
ndo_start_xmit() with the MAC header unset. A driver that reads
eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an
out-of-bounds access ~64 KiB past the head -- the same class fixed for
one consumer in commit f5089008f9 ("macsec: do not read an unset MAC
header in macsec_encrypt()").
packet_parse_headers() runs only on the transmit path, where skb->data
points at the start of the L2 header for every packet-socket type
regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied
header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC
header unconditionally, mirroring __dev_queue_xmit(), so the frame is
anchored on the bypass path too.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against source and matched to the macsec KASAN report in
f5089008f9. Compile-tested.
Fixes: 75c65772c3 ("net/packet: Ask driver for protocol if not provided by user")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260724144015.63219-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We should either have net_iov or page backed frags in a single skb,
otherwise it blows up down the stack. Don't allow mixing in
zerocopy_fill_skb_from_devmem().
Fixes: bd61848900 ("net: devmem: Implement TX path")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/e3199788c4732545627a4721097ebb71ad737bab.1785150502.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and
takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the
active slave. In that window the active slave can change under RTNL
(RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()),
which already drops the promiscuity and clears primary_is_promisc. The
monitor still acts on the stale decision: if the slave was removed with no
failover, curr_active_slave is now NULL and the deref faults; if it failed
over, the stale dev_set_promiscuity(-1) underflows the new slave's
promiscuity counter and pins it in IFF_PROMISC.
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: b42 bond_alb_monitor
RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Kernel panic - not syncing: Fatal exception
Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so
the monitor only undoes an increment it still owns. The other bonding
monitors already re-read state under RTNL in their commit phase
(bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only
one acting on the pre-trylock decision.
Fixes: d0e81b7e22 ("bonding: Acquire correct locks in alb for promisc change")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260725233930.2957317-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit a8065af334.
Per the USB4 spec, a Transmit Descriptor Ring with E2E flow control
disabled does not require any credits to be available before the Host
Interface Adapter Layer transmits a tunneled packet from it. Once E2E is
enabled on that ring the controller must first obtain end-to-end
credits.
The ASMedia ASM4242 USB4 host router (PCI 1b21:2425) never delivers
those credits. The controller does accept the configuration: reading the
ring OPTIONS register back right after tb_ring_start() returns exactly
what was written, including RING_FLAG_E2E_FLOW_CONTROL (bit 28) and the
E2E HopID field. No credit ever arrives though, so the Tx ring's
hardware consumer index never advances and the link carries no traffic
at all.
Measured on two hosts connected point to point, onboard ASM4242 on MSI
X870E and X870, v6.17, stock drivers/net/thunderbolt/main.c with only
this revert applied on top:
before: 100% packet loss to the peer; thunderbolt0 is up and the
XDomain handshake completes ("new host found"), but iperf3
fails with "No route to host" once the neighbour entry
expires
after: 0% packet loss, 0.28 ms RTT; iperf3 4.21 Gb/s one way and
5.17 Gb/s the other (5 runs each, stddev <= 0.02), 1
retransmit in 10 s
An instrumented build additionally showed a frozen-Tx-consumer watchdog
firing ~30k times in a 10 s window before this change.
Rx-side E2E is not touched by this revert, so peers that do return
credits keep receive-side flow control.
ASMedia does not look like an isolated case. The out-of-tree
thunderbolt-ibverbs project disables native E2E on AMD NHI by default,
noting that "Strix Halo has reproduced TX completion wedges with
multiple native E2E rings active" -- the same failure mode, on a
different vendor. Since the driver has no way to tell in advance which
host router returns the credits, going back to the previous behaviour
looks safer than adding a quirk per affected part; Tx-side E2E can be
reintroduced as an opt-in for controllers that are known to implement
the credit return.
Note that the reverted commit was not fixing a reported problem, it was
derived from the spec wording alone, so this revert is not expected to
regress a known workload. Cc'ing the original author in case there was
one.
Fixes: a8065af334 ("net: thunderbolt: Enable end-to-end flow control also in transmit")
Cc: zhangjianrong <zhangjianrong5@huawei.com>
Signed-off-by: Fan Ye <fy15309206903@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260727123002.25225-1-fy15309206903@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After setting a 100G optical port to 40G via ethtool and reloading
the driver, the port remains at 40G instead of reverting to the
firmware default speed of 100G.
The commit referenced in Fixes: added two overwrites in
hclge_init_ae_dev() for non-copper media, so that optical ports
connected to forced-mode remotes inherit the firmware-preset
autoneg and speed instead of the hardcoded defaults:
req_autoneg = mac.autoneg
req_speed = mac.speed (when autoneg disabled)
The autoneg overwrite keeps existing behavior:
hclge_set_autoneg_speed_dup() already uses mac.autoneg (not
req_autoneg) since it was introduced, so autoneg inheritance from
firmware was already in place. This part is kept.
The speed overwrite, however, introduces the residue: mac.speed
reflects whatever was last programmed into the MAC, and after unload
firmware does not restore the MAC speed to the flash default. So if
the user changed speed via ethtool in a prior load, mac.speed still
carries that value on reload and req_speed inherits it.
Fix by dropping the req_speed overwrite only. req_speed keeps the
firmware default value set in hclge_configure() (cfg.default_speed),
so a reload reverts the speed to default, matching the expectation
that a driver reload resets link configuration.
Trade-off: on optical ports whose firmware default speed does not
match a forced-mode remote, reload now drops the link and the user
must re-apply ethtool configuration. This is acceptable: a driver
reload is expected to reset link configuration, not to inherit
runtime state from before unload. The autoneg inheritance is left
in place as established behavior; changing it is out of scope for
this patch and would itself be a user-perceivable behavior change.
Fixes: d9d349c4e8 ("net: hns3: differentiate autoneg default values between copper and fiber")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260724093036.426631-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- eth: tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is present
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth: veth: convert frag_list skbs before running XDP
- eth: ice: wait for reset completion in ice_resume()
- eth: igc: remove napi_synchronize() in igc_down()
- eth: vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- eth: idpf: bound interrupt-vector register fill to the allocated array
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=jLD8
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again larger than usual: the backlog accumulated in the past weeks
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen
ordering
- eth:
- tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is
present
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and
notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth:
- veth: convert frag_list skbs before running XDP
- ice: wait for reset completion in ice_resume()
- igc: remove napi_synchronize() in igc_down()
- vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
- eth:
- idpf: bound interrupt-vector register fill to the allocated array"
* tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (156 commits)
qede: sync udp_tunnel ports outside qede_lock in the recovery path
net: openvswitch: fix potential UAF on meter attach failure
octeontx2-pf: Set correct sequence for carrier off and tx queue stop
net: libwx: fix FDIR ATR queue mismatch for software VLAN packets
net: dsa: realtek: use devm_mutex_init for l2_lock
net: dsa: realtek: use devm_mutex_init for vlan_lock
net: dsa: realtek: use devm_mutex_init for regmap lock
net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock
ptp: netc: fix potential interrupt storm caused by incorrect unbind order
net: mana: Return error code from mana_create_rxq()
net: openvswitch: fix skb leak on flow key update failure during ct
net: openvswitch: fix skb leak on flow key update failure during recirculation
net: stmmac: Fix E2E delay mechanism
net: dsa: mt7530: error out on failed reads in MT7531 PHY polling
net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling
net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend
Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"
Revert "vhost-net: wake queue of tun/tap after ptr_ring consume"
Revert "ptr_ring: move free-space check into separate helper"
Revert "tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"
...
- fix a memory leak in gpio-sloppy-logic-analyzer
- fix a regression in GPIO hog handling for hogs without direction
specified
- extend the critical section in IRQ handling in gpio-pca953x to cover
the reads from the direction register
- disable the interrupt on errors when restoring context in gpio-pca953x
- apply the initial value when setting direction in gpio-by-pinctrl
- use raw spinlock for the register lock in gpio-pch to address locking
context issues
-----BEGIN PGP SIGNATURE-----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=0jhj
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a memory leak in gpio-sloppy-logic-analyzer
- fix a regression in GPIO hog handling for hogs without direction
specified
- extend the critical section in IRQ handling in gpio-pca953x to cover
the reads from the direction register
- disable the interrupt on errors when restoring context in
gpio-pca953x
- apply the initial value when setting direction in gpio-by-pinctrl
- use raw spinlock for the register lock in gpio-pch to address locking
context issues
* tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pch: use raw_spinlock_t for the register lock
gpio: pca953x: fix cache_only and IRQ state on restore_context() failure
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
gpiolib: tolerate gpio-hogs lacking a hogging state
gpio: sloppy-logic-analyzer: Fix memory leak in gpio_la_poll_probe()
- Ensure vpa,slb_shadow & dtl are unregistered during crash
- fix nap return address corruption on async interrupt exit in 970 platform
- Fix exit_flags field placement in pt_regs for ptrace
- Fix map failure path in dma_ioc0_map_pages() in ps3 platfrom
- MAINTAINERS: Demote myself to reviewer
- misc fixes and cleanup
Thanks to:
Amit Machhiwal, Andreas Schwab, Anushree Mathur, Athira Rajeev, Christophe
Leroy (CS GROUP), Dmitry V. Levin, Geert Uytterhoeven, John Ogness, Michael
Ellerman, Mukesh Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Thorsten Blum,
Vaibhav Jain
-----BEGIN PGP SIGNATURE-----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=On4C
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- ensure vpa,slb_shadow & dtl are unregistered during crash
- fix nap return address corruption on async interrupt exit in 970
platform
- fix exit_flags field placement in pt_regs for ptrace
- fix map failure path in dma_ioc0_map_pages() in ps3 platfrom
- MAINTAINERS: Michael Ellerman demotes himself to reviewer
- misc fixes and cleanup
Thanks to Amit Machhiwal, Andreas Schwab, Anushree Mathur, Athira
Rajeev, Christophe Leroy (CS GROUP), Dmitry V. Levin, Geert
Uytterhoeven, John Ogness, Michael Ellerman, Mukesh Kumar Chaurasiya
(IBM), Ritesh Harjani (IBM), Thorsten Blum, and Vaibhav Jain
* tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
MAINTAINERS: Demote myself to reviewer
powerpc/serial: Fix include guard comment
powerpc/perf: Use strstarts() to simplify is_thread_imc_pmu()
powerpc/ps3: Fix map failure path in dma_ioc0_map_pages()
powerpc/ps3: Remove unused struct table in setup_areas()
powerpc/boot: Fix treeboot-akebono CPU node lookup check
powerpc/boot: Fix treeboot-currituck CPU node lookup check
powerpc/boot: Fix simpleboot CPU node lookup check
powerpc: Fix exit_flags field placement in pt_regs for ptrace
powerpc/970: fix nap return address corruption on async interrupt exit
powerpc/pseries: Skip vpa_init() for boot cpu in smp_setup_cpu()
powerpc/pseries: Ensure vpa,slb_shadow & dtl are unregistered during crash
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them.
Fixes: 8cd160a294 ("qede: convert to new udp_tunnel_nic infra")
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Andrew Lunn <andrew+netdev@lunn.ch>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260726104311.1782900-1-den@openvz.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCamnRyhMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3SS00A/Rpm6GVkF0ievxaEWz5no+Vojn2U/S7K
3ix+pFFfrnyTAP9CfWhg8aIkLOF19RXhKRRLDIm5vI8qKCqrqBkSZszJCw==
=Qoox
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-07-29
this is a pull request of 20 patches for net/main.
The first 2 patches fix problems in the CAN J1939 protocol and are by
Tetsuo Handa and Oleksij Rempel.
The next 2 patches fix problems in the CAN ISOTP protocol and are by
Oliver Hartkopp and Minhong He.
Avi Weiss contributes contributed 4 fixes for the ctucanfd, Pengpeng
Hou's patch adds a missing MODULE_DEVICE_TABLE.
The patches for the peak_usb driver are contributed by James Gao,
Maoyi Xie, Maoyi Xie and add sanity checks for the USB bulk data
parsing and fix a double free.
2 fixes for the kvaser_usb driver are provided by Abdun Nihaal and
Pengpeng Hou, a mem leak is fixed and sanity checks for the USB bulk
data parsing.
Tu Nguyen's patch for the rcar_canfd driver fixes the initializing
flow.
Pengpeng Hou contributes a patch for the softing driver to validate
the firmware record spans.
Lucas Martins Alves's patch for the c_can driver keeps the controller
in init mode until configuration is complete.
A patch by my add missing URB resubmission on skb allocation failure
to the gs_usb driver.
Guangshuo Li's patch for the etas_es58x driver fixes a RX buffer leak.
The last patch is by Pengpeng Hou and adds sanity checks to the USB
bulk data parsing of the ems_usb driver.
linux-can-fixes-for-7.2-20260729
* tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: ems_usb: validate CPC message lengths
can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure
can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure
can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured
can: softing: fw_parse(): validate firmware record spans
can: rcar_canfd: change the initializing flow for clocks and resets
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams()
can: peak_usb: validate uCAN receive record lengths
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
can: peak_usb: add bounds check for USB channel index
can: ctucanfd: add missing MODULE_DEVICE_TABLE()
can: ctucanfd: use self-test mode for PRESUME_ACK
can: ctucanfd: handle bus error interrupts
can: ctucanfd: mark error-active controller status valid
can: ctucanfd: unmap BAR0 using base address
can: isotp: check register_netdevice_notifier() error in module init
can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer
can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking
====================
Link: https://patch.msgid.link/20260729102802.505168-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While attaching a newly created meter attach_meter() function makes
the new meter visible to other CPUs but can still fail afterwards.
On failure, it detaches the meter back and returns an error.
However, this is an unexpected behavior for the ovs_meter_cmd_set()
that uses a plain kfree(meter) on attach failure without waiting for
RCU readers to stop using it, assuming it was never visible.
This is never a problem for ovs-vswitchd as it always creates meters
before creating any flows that use them. But the UAF can be triggered
with a custom application using uAPI:
BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653)
Read of size 8 at addr ffff88810d152650 by task meter/2508
Call Trace:
ovs_meter_execute (net/openvswitch/meter.c:653)
do_execute_actions (net/openvswitch/actions.c:1407)
ovs_execute_actions (net/openvswitch/actions.c:1584)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:703)
...
netlink_sendmsg (af_netlink.c:1900)
Allocated by task 2519:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
ovs_meter_cmd_set (net/openvswitch/meter.c:422)
...
netlink_sendmsg (af_netlink.c:1900)
Freed by task 2519:
kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720)
ovs_meter_cmd_set (net/openvswitch/meter.c:479)
...
netlink_sendmsg (af_netlink.c:1900)
Fix that by making sure attach_meter() doesn't make the meter visible
until all the checks are done and the function can't fail anymore.
This also makes sure the "hash" value is calculated after the potential
re-sizing of the table.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642.
Fixes: c7c4c44c9a ("net: openvswitch: expand the meters supported number")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260727121022.198461-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During link down event, we were doing netif_tx_stop_all_queues() first
and then netif_carrier_off(). This can cause a potential race since
carrier is still on during down event. This patch reverse the calling
order to fix the issue.
Fixes: 50fe6c02e5 ("octeontx2-pf: Register and handle link notifications")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260724072831.2415281-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When TX VLAN hardware offload is disabled, VLAN tags are embedded in
the packet payload (software VLAN). Previously, the driver failed to
set the WX_TX_FLAGS_SW_VLAN flag for these packets during transmission.
This missing flag caused the txgbe FDIR ATR logic to fall through to the
default hash calculation path. This resulted in asymmetric hash values
for Tx and Rx flows, preventing return packets from being steered to the
same queue as the transmit packets.
Fix this by detecting software VLANs via eth_type_vlan(skb->protocol)
and setting WX_TX_FLAGS_SW_VLAN. This ensures the ATR feature selects
the correct hashing algorithm to maintain Tx/Rx queue symmetry.
Fixes: b501d261a5 ("net: txgbe: add FDIR ATR support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0879DA38A8E32701+20260724074657.10773-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: use devm_mutex_init
This series fixes mutex teardown in the Realtek DSA drivers.
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() must be called before
the mutex is discarded. Using devm_mutex_init() lets the driver core
handle that automatically.
The changes are split into individual commits based on the feature that
introduced each lock to allow proper backports to stable trees.
====================
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-0-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 336e3e4a1a ("net: dsa: realtek: rtl8365mb: add FDB support")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-4-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 9da2c8672f ("net: dsa: realtek: rtl8365mb: add VLAN support")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-3-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 907e772f6f ("net: dsa: realtek: allow subdrivers to externally lock regmap")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-2-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-1-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In netc_timer_remove(), hardware interrupts are disabled by clearing
TMR_TEMASK before ptp_clock_unregister() is called. This may cause a
race condition during driver unbind that could leave hardware interrupts
active. For example, a concurrent PTP_CLK_REQ_EXTTS ioctl can re-enable
TMR_TEMASK after it has been cleared, leaving a pending hardware
interrupt when the driver unbinds.
Since the NETC Timer does not support PCIe FLR, hardware state is not
reset during probe. When the driver is rebound and the IRQ is registered,
the pending interrupt fires immediately. At that point priv->tmr_emask
is still zero, so netc_timer_isr() does not clear the interrupt status
and unconditionally returns IRQ_HANDLED, resulting in an uninterruptible
infinite interrupt storm.
Fix this in several ways. First, request the IRQ with IRQF_NO_AUTOEN so
it is not enabled when request_irq() runs, and clear TMR_TEMASK in
netc_timer_init() before enabling it. The IRQ is only enabled at the end
of probe once the timer has been reprogrammed and the PTP clock has been
registered. This ensures a stale pending interrupt from a previous unbind
or an unclean shutdown cannot be delivered before the driver is fully
initialized.
Second, in netc_timer_remove() call disable_irq() before
ptp_clock_unregister() and move the TMR_TEMASK/TMR_CTRL clearing after
it. disable_irq() masks the line and waits for any in-flight
netc_timer_isr() to finish, so no ISR can dereference priv->clock after
ptp_clock_unregister() has freed it. Unregistering the PTP clock before
clearing the mask also guarantees that no in-flight or concurrent ioctl
can re-enable hardware interrupts.
Finally, return IRQ_NONE from netc_timer_isr() when the masked event
status is zero, so the kernel's spurious interrupt detection can disable
a stuck line instead of looping forever.
Fixes: 671e266835 ("ptp: netc: add periodic pulse output support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260720012508.23227-1-wei.fang%40oss.nxp.com
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260727060348.1887464-1-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_create_rxq() returns a struct mana_rxq pointer and returns NULL on
any failure. The caller, mana_add_rx_queues(), cannot tell what went
wrong and hardcodes the error as -ENOMEM. As a result the actual failure
reported by the lower layers (for example -EPROTO from a failed HW
request) is masked and every RX queue creation failure looks like an
out-of-memory error.
Return an ERR_PTR() encoded error code from mana_create_rxq() on failure
instead of NULL. The caller now propagates the returned error code
directly instead of substituting -ENOMEM.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260727113759.2881500-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ilya Maximets says:
====================
net: openvswitch: fix skb leak on flow key update failure
Fixes for two issues reported by Sashiko while reviewing other patches.
The root cause is the same, fixes and the Fixes are slightly different,
so two separate patches.
====================
Link: https://patch.msgid.link/20260727181851.306076-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovs_ct_execute() always steals or frees the skb on failure while
ovs_flow_key_update() does not. So, if it fails and we return right
away, the skb ends up leaked.
Fix that by breaking instead and letting the common error handling
code at the bottom of the loop to free the skb properly.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko.
Fixes: ec0d043d05 ("openvswitch: Ensure flow is valid before executing ct")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260727181851.306076-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_execute_actions() returns right away when execute_recirc() fails on
the last action as it assumes this function always takes ownership of
the skb when 'last' is true. But when the flow key update fails, the
function doesn't free the skb and it ends up leaked.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko.
Fixes: 971427f353 ("openvswitch: Add recirc and hash action.")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260727181851.306076-2-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For E2E delay mechanism, "received DELAY_REQ without timestamp" error
messages show up for dwmac v3.70+ and dwxgmac IPs.
This issue affects socfpga platforms, Agilex7 (dwmac 3.70) and
Agilex5 (dwxgmac). According to the databook, to enable timestamping
for all events, the SNAPTYPSEL bits in the MAC_Timestamp_Control
register must be set to 2'b01, and the TSEVNTENA bit must be cleared
to 0'b0.
Commit 3cb958027c ("net: stmmac: Fix E2E delay mechanism") already
addresses this problem for all dwmacs above version v4.10. However,
same holds true for v3.70 and above, as well as for dwxgmac. Updates
the check accordingly.
Fixes: 14f347334b ("net: stmmac: Correctly take timestamp for PTPv2")
Fixes: f2fb6b6275 ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a")
Fixes: 3cb958027c ("net: stmmac: Fix E2E delay mechanism")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Link: https://patch.msgid.link/20260728060904.31993-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: mt7530: fix swallowed MDIO read errors
While working on a register access cleanup for the mt7530 driver, the
Sashiko AI reviewers flagged long-standing error handling gaps in the
driver's read paths [1].
The MDIO regmap backend truncates negative bus->read() errnos into u16
register halves and returns success, handing garbage data to callers
and to read-modify-write cycles which then write it back to the switch.
The ATC/VTCR command polls and the MT7531 indirect PHY polls consume
reads through a helper which returns 0 when the underlying read fails.
A failed bus transaction thus clears the polled busy bit and is
mistaken for command completion, defeats the subsequent
ATC_INVALID/VTCR_INVALID checks the same way, and lets the indirect
PHY access functions return garbage PHY register data.
Fix the backend to propagate bus->read() errors, and convert the
command and PHY access polls to regmap_read_poll_timeout(), which
terminates polling on read errors and propagates them.
The cleanup series depending on these fixes will be submitted to
net-next separately after the next net/net-next merger.
[1] https://lore.kernel.org/netdev/cover.1784481922.git.daniel@makrotopia.org/
====================
Link: https://patch.msgid.link/cover.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MT7531 indirect PHY access functions poll MT7531_PHY_IAC through
a helper which returns 0 when the underlying read fails, so a failed
bus transaction clears MT7531_PHY_ACS_ST and the access carries on,
returning garbage PHY register data to phylib.
Poll using regmap_read_poll_timeout(), which stops on read errors and
propagates them. These functions hold the MDIO bus lock across the
whole sequence, so the unlocked regmap accesses remain correct. Remove
the now-unused _mt7530_unlocked_read().
Fixes: c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/79e85d68d210cc37342978171aa6432aa2954333.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt7530_fdb_cmd() and mt7530_vlan_cmd() poll the command register
through a helper which returns 0 when the underlying read fails. A
failed bus transaction thus clears ATC_BUSY/VTCR_BUSY and is treated
as successful command completion, and the subsequent ATC_INVALID and
VTCR_INVALID checks are defeated the same way.
Poll using regmap_read_poll_timeout(), which stops on read errors and
propagates them, and check the completion status read as well. Take
the MDIO bus lock across the sequence as the switch regmap is set up
with locking disabled.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Fixes: 83163f7dca ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/eea1d8f15c54375b3770c23e09fb3217df487169.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bus->read() returns a negative errno on failure, but
mt7530_regmap_read() assigns it to a u16, truncating e.g. -ETIMEDOUT
into 0xff92, and returns success. The garbage word is then consumed as
register data, and read-modify-write cycles write it back to the
switch. Check both reads and propagate their errors.
The same defect existed in mt7530_mii_read() since the driver was
introduced and moved into the regmap backend unchanged.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/3c628e48276c2e5522c8795a6be60d11c7a76a7d.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-07-28 (idpf, ice, igc, igbvf, e1000)
Michael Bommarito adds bounds checking to ensure interrupt vector array
stays in-bounds on idpf.
Josh adjusts minimum value for Tx ring descriptors to prevent Tx
timeouts in flow based scheduling mode in idpf.
Yuho Choi frees IRQ name in error path to prevent memory leak for idpf.
Aaron Ma adds a wait for reset completion before returning from resume
on ice driver.
Dawid completely disables and clears VF interrupts during reset on ice.
Dawei Feng adjusts error path for ice loopback test setup and e1000 probe
to prevent memory leaks.
Przemek ignores, expected, -EBUSY errors that can occur during reset
and cause disabling of DPLL on ice.
David Carlier removes napi_synchronize() during igc_down for igc.
Matt Vollrath removes incorrect decrement of count which could cause
leaking due to off-by-one issue.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000: fix memory leak in e1000_probe()
igbvf: Fix leak in TX DMA error cleanup
igc: remove napi_synchronize() in igc_down()
ice: suppress DPLL errors during reset recovery
ice: fix memory leak in ice_lbtest_prepare_rings()
ice: fix VF interrupts cleanup
ice: wait for reset completion in ice_resume()
idpf: Fix mailbox IRQ name leak on request failure
idpf: adjust TxQ ring count minimum
idpf: bound interrupt-vector register fill to the allocated array
====================
Link: https://patch.msgid.link/20260728210909.3042004-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Schippers says:
====================
Revert "tun/tap & vhost-net: apply qdisc backpressure on full ptr_ring to reduce TX drops"
Commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop when
a qdisc is present") did not show a relevant performance regression in my
testing, but on Brett Sheffield's librecast testbed it causes a
significant throughput drop in an IPv6 multicast testcase. The regression
can be pinpointed to multiple iperf3 TCP threads sending: for 8 threads
the throughput dropped from 13.5 Gbit/s to 9.13 Gbit/s.
Therefore this series reverts the qdisc backpressure work.
Making the backpressure opt-in via a new IFF_BACKPRESSURE flag was
proposed in [1], but a new IFF_* flag needs more review scrutiny than is
available at the moment, so a revert was requested instead. The opt-in
will be resubmitted for net-next later.
[1] Link: https://lore.kernel.org/netdev/20260709095511.168235-1-simon.schippers@tu-dortmund.de/
Reported-by: Brett Sheffield <brett@librecast.net>
Closes: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
====================
Link: https://patch.msgid.link/20260728092240.250257-1-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit d4c22d70d7.
There is no netdev queue left to wake after reverting
commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-5-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit baf808fe4f.
There is no netdev queue left to wake after reverting
commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-4-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit fba362c17d.
__ptr_ring_check_produce() has no users left after reverting
commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-3-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 1d6e569b7d.
The commit stops the netdev queue when the ptr_ring is full instead of
dropping the packet. My own tests showed no relevant regression, but on
Brett Sheffield's librecast testbed an IPv6 multicast testcase got
slower. With 8 iperf3 TCP threads sending, the throughput dropped from
13.5 Gbit/s to 9.13 Gbit/s.
Reported-by: Brett Sheffield <brett@librecast.net>
Closes: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-2-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- a set of ath12k fixes, including a recent
MLO regression for WCN7850/QCC2072
- iwlegacy gets rid of a BUG_ON that triggered
- a couple more robustness/security fixes
-----BEGIN PGP SIGNATURE-----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=5+os
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-07-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Much quieter, thankfully:
- a set of ath12k fixes, including a recent
MLO regression for WCN7850/QCC2072
- iwlegacy gets rid of a BUG_ON that triggered
- a couple more robustness/security fixes
* tag 'wireless-2026-07-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlegacy: replace BUG_ON() with WARN_ON() on num_stations check
wifi: mac80211: validate individual TWT params before driver setup
wifi: cfg80211: publish PMSR request before starting the driver
wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
wifi: mac80211: fix tid_tx use-after-free on BA session stop
wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event
wifi: ath12k: defer dp_peer registration when firmware allocates MLD peer ID
wifi: ath12k: do not advertise MLD peer ID for firmware-allocate devices
wifi: ath12k: introduce host_alloc_ml_id hardware parameter
wifi: ath12k: add support for HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP
wifi: ath12k: keep ATH12K_PEER_ML_ID_VALID set in ath12k_sta::ml_peer_id
wifi: ath12k: factor out peer assoc send-and-wait into a helper
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
====================
Link: https://patch.msgid.link/20260729071954.45655-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- tracing/probes: Reject $arg0 in meta argument expansion
Reject $arg0 during meta-argument expansion to prevent negative index
calculation and out-of-bounds reading of traceprobe parameters.
- tracing/fprobe: Roll back on enable_trace_fprobe() failure
Add a rollback cleanup path when __register_trace_fprobe() fails
partway through to unregister registered probes and clear flags or
file links.
- fprobe: Fix module reference count leak on error in register_fprobe()
Ensure the module_put() cleanup loop runs even when get_ips_from_filter()
returns an error, preventing module reference count leaks.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmpqCOQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bL3MIAIDcYue5MYMYlTUAq2TF
QIj0DszmO/moCiClZx4MjqG6I/saSYjxb6JND+FB+q5x7JHBJFzfe4Fu+rfHwXNU
Z45nX2q8ccFhFEa2mvJvC8y5XvYCMgz3uZC4FGdXNFbOhM5wXGr+Gp4AgpCUd6LX
PDoC164NaIodIEZ9rxHv3nulLNNLmM7ZmWZXNmHNLWL8YcJADiluVQbmx5b0b8IO
j7ce+RHdtkhuHkQ093A+CkzineS9Zo7BhcFiphse6WoXOm1OFP46Dc5S/w3o3Mn+
4dVHbbPOD6icLATzyH3LQn9xkRC1jgjZnINDFjszogHDUu23czrtjgpTVeUpoX5t
5p0=
=t4dL
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Reject $arg0 during meta-argument expansion to prevent negative index
calculation and out-of-bounds reading of traceprobe parameters
- Roll back on enable_trace_fprobe() failure
Add a rollback cleanup path when __register_trace_fprobe() fails
partway through to unregister registered probes and clear flags or
file links
- Fix module reference count leak on error in register_fprobe()
Ensure the module_put() cleanup loop still runs even when
get_ips_from_filter() returns an error, preventing module
reference count leaks
* tag 'probes-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix module reference count leak on error in register_fprobe()
tracing/fprobe: Roll back on enable_trace_fprobe() failure
tracing/probes: Reject $arg0 in meta argument expansion
The Adaptation Layer Indication parameter contains a fixed 32-bit
Adaptation Code Point after its parameter header. However,
sctp_verify_param() accepts a header-only parameter because the generic
parameter walker only requires the header to be present.
sctp_process_param() then reads adaptation_ind beyond the declared
parameter. When the malformed parameter is last in an INIT, the read
starts at the receive skb tail, and the value is copied into the state
cookie returned in the INIT ACK. This may disclose four receive-buffer
tail bytes.
Require the declared parameter length to match the fixed structure size
and abort the association through the existing invalid parameter length
path otherwise.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Charles Vosburgh <trilobyte777@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260727-sctp-adaptation-length-v1-1-0ab58b2810a5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I have changed jobs and therefore no longer have access to hardware
using Realtek Ethernet switches. Luiz has kindly agreed to take up the
role of maintainer, while I will stick around as a reviewer.
Also update .mailmap so that mails to my old company email stop
bouncing. Use my new work email for Analog Devices Inc. instead.
Signed-off-by: Alvin Šipraga <alvin.sipraga@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260727-realtek-maintainers-v1-1-ab501adc0cdb@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding a source-specific route creates a new subtree, fib6_add()
installs fib6_null_entry as the temporary leaf of the new subtree root
and takes a fib6_info reference for that holder.
If adding the first source leaf fails, the code frees the just allocated
subtree root but leaves that hold behind. fib6_null_entry is a per-netns
sentinel and is freed directly at netns teardown, so this does not keep
the object alive. However, it leaves its visible refcount permanently
elevated and can eventually saturate the refcount on repeated failures.
Drop the null-entry reference before freeing the unlinked subtree root.
Fixes: 5ea715289a ("ipv6: broadly use fib6_info_hold() helper")
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20260727185339.1545169-1-shuangpeng.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The race occurs between network namespace removal and PSP device
unregistration. When a netns is deleted while a PSP device associated
with that netns is concurrently being removed, psp_dev_unregister()
triggers psp_nl_notify_dev() to send a device change notification.
Concurrently, cleanup_net() running in the netns workqueue calls
genl_pernet_exit(), which sets net->genl_sock to NULL. If
genl_pernet_exit() wins the race, two sites in psp_nl_multicast_per_ns()
then dereference the NULL socket and crash:
CPU 0 (netns teardown) CPU 1 (PSP device unregister)
====================== =============================
cleanup_net [workqueue]
genl_pernet_exit() psp_dev_unregister()
net->genl_sock = NULL psp_nl_notify_dev()
psp_nl_multicast_per_ns()
build_ntf()
-> netlink_has_listeners(NULL)
/* crash */
genlmsg_multicast_netns()
-> nlmsg_multicast_filtered(NULL)
/* crash */
Fix by replacing the bare dev_net() calls with maybe_get_net().
maybe_get_net() returns NULL if the namespace is already dying.
Holding the reference ensures genl_sock remains valid across both the
build_ntf() and genlmsg_multicast_netns() calls.
Fixes: 00c94ca2b9 ("psp: base PSP device support")
Fixes: 06c2dce2d0 ("psp: add new netlink cmd for dev-assoc and dev-disassoc")
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
Signed-off-by: Kiran Kella <kiran.kella@broadcom.com>
Link: https://patch.msgid.link/20260727101628.502042-1-kiran.kella@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
