This watchdog can't be used with Linux because the firmware needs it on
Draak boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250925093941.8800-24-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This watchdog can't be used with Linux because the firmware needs it on
ULCB boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250925093941.8800-23-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This watchdog can't be used with Linux because the firmware needs it on
Salvator boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250925093941.8800-22-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add pinmuxing and configuration of the MMC-capable SDHI instance to make
use of the eMMC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250923161709.3110-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
'#sound-dai-cells' is not mentioned in the encoder bindings doc, so
dtbs_check rightfully complains. Remove the property.
.../renesas-v8/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dtb: hdmi@39 (adi,adv7511w): '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250920070433.8229-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add TSU node along with thermal zones and keep it enabled in the SoC DTSI.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250917170202.197929-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a DT overlay to bind the Argon40 fan HAT on the Retronix R-Car V4H
Sparrow Hawk board. Fan RPM control and full RPM on reboot has been
tested.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250907161130.218470-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a DT overlay to bind the Raspberry Pi Display 2 (both 5" and 7"
variants), on the Retronix R-Car V4H Sparrow Hawk board. All of display
output, touch controller, and backlight control have been tested.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250904202838.172579-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clock-frequency for camera sensors has been deprecated in favour of
the assigned-clocks and assigned-clock-rates properties. As the clock
source for the sensor is a fixed-frequency oscillator, simply drop the
clock-frequency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Link: https://patch.msgid.link/20250812214620.30425-73-laurent.pinchart@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clock-frequency for camera sensors has been deprecated in favour of
the assigned-clocks and assigned-clock-rates properties. As the clock
source for the sensor is a fixed-frequency oscillator, simply drop the
clock-frequency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Link: https://patch.msgid.link/20250812214620.30425-72-laurent.pinchart@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add TSU node along with thermal zones and keep it enabled in the SoC DTSI.
The temperature reported by the TSU can only be read through channel 8 of
the ADC. Therefore, enable the ADC by default.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20250810122125.792966-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next.
-----BEGIN PGP SIGNATURE-----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=b0xy
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
reserved and accessing reserved register space could result in undefined
behavior
- Fix a function's retval check in aspeed-scu-ic
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmjrdesACgkQEsHwGGHe
VUp2YBAArrV/gpawIM9ivoX8Fl2q6B8IdVIWVyHgfcNhVuDkivaWngUIV6fMTcY/
j+EuDVCCS1UNOdK0+9j+t2Y/ybZ+c6hIbDiQo6MRGG38A5x1X0oT9657/fLysZzs
6XOo+HF0d9bSoL1FWr6q3UEyUJrhT0kZgk1t81TcR22wSvLiiSBvKOH+GRuSECDm
SUOLLQZMNbH1WTY7mLoZ7TzRNPLFFyb8xqeHb8IeffA1U1K7qPueQmzxTgXZVyLs
snOdcmhLvR9eev7mIcD+1HbPtMwlkhhari0eHSmnbWWiiTKi4g7MOoudCJPu3jBW
nzSmtMPT3PCMI3rnMQTMJIv6GyNi4zgu9gqsTpMP/elaAUjgbp4/D7p5XJrOL4SF
oy62QTq8n2kkymQtkG/aa0mZI7cDeUuRLR1nI9avy/+sof6NJM86BbLnUTcQVGTB
qa/VuKJdfcuSin//3Mw9+wP7DKLrLvMYn3+/v18vscAvayMNsUHAC5OuY3g7Wh5P
YZstG7MtZ+EhHNvnIFlg0wQIZ3Vk3+EUuxq+RMkcJF7VCNP1eKv07Fe4T7luWGt8
qqX3wfZFTNyQxqQSpmYNiR92K6RrWPp76jz700nZ24NQfZs8U1uAjzQgeYBj8c5j
Du9Fx8A6mwMw28d9A/cFmQbcVi/M4pI1ctKd7/9o5H4/f6nutlI=
=dVwm
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
The previous fix to trace_marker required updating trace_marker_raw
as well. The difference between trace_marker_raw from trace_marker
is that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings.
This is for applications that will read the raw data from the ring
buffer and get the data structures directly. It's a bit quicker than
using the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was needed for
both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly fixed
the trace_marker write function, but the trace_marker_raw file wasn't
fixed properly. The user space data was correctly written into the per CPU
buffer, but the code that wrote into the ring buffer still used the user
space pointer and not the per CPU buffer that had the user space data
already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(), another
issue appeared. As writes to the trace_marker_raw expects binary data, the
first entry is a 4 byte identifier. The entry structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the cnt
used also includes the entry->id portion. Allocating sizeof(*entry)
plus cnt is actually allocating 4 bytes more than what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy().
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaOq0fhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4HAQCNbFEDjzNNEueCWLOptC5YfeJgdvPB
399CzuFJl02ZOgD/flPJa1r+NaeYOBhe1BgpFF9FzB/SPXAXkXUGLM7WIgg=
=goks
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
