- helios64: hdd-power, pcie, 2.5GbE nic
- spi for rk356x and on the Quartz-A board
- headphone, bluetooth support on Rock Pi4
And some misc soc improvements:
- missing dsi compatible on px30
- pwm pinctrl name on rk356x
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmG3IO8QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQBQB/0cZ22l3mIAxiFdk0ZJ9jojuZiCXz4A2AUc
WYY8J2m5F+3jGJ50FuXLHw+WZKUqMHs5g0ISmmmqUjnU1nQPcJbpzcj4QkfRmlRJ
GNaMX4K5fxxsW2HQ/e0M5CWSQ5IYbEsEWAnlrW+LYzL+f5Mlwf13SI+kSZdLoZdP
4ZIPfVWovzIdiNlPuqht5tMB7pHvOC5UPIDMbNs8DamOF0VIppRgDODsgpZQ1wkq
D/x5g5dQBh8PGDl758hNSy5uU2fHS2Ghn8ooeGjakax8XhHTfUYEieCp5JI4fr7Y
X336aXG34TGpKivVtowcj+LtGZ+w2A56ZjBsWwxYkh/2GfzPJiRK
=37E1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Qxh/
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Improvements on a number of boards:
- helios64: hdd-power, pcie, 2.5GbE nic
- spi for rk356x and on the Quartz-A board
- headphone, bluetooth support on Rock Pi4
And some misc soc improvements:
- missing dsi compatible on px30
- pwm pinctrl name on rk356x
* tag 'v5.17-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards
arm64: dts: rockchip: Add missing secondary compatible for PX30 DSI
arm64: dts: rockchip: Add spi1 pins on Quartz64 A
arm64: dts: rockchip: Add spi nodes on rk356x
arm64: dts: rockchip: Change pwm pinctrl-name to "default" on rk356x
arm64: dts: rockchip: Enable HDD power on helios64
arm64: dts: rockchip: add variables for pcie completion to helios64
arm64: dts: rockchip: define usb hub and 2.5GbE nic on helios64
arm64: dts: rockchip: add interrupt and headphone-detection for Rock Pi4's audio codec
Link: https://lore.kernel.org/r/3637342.7akbv5NDAT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Separate DTs for all t8103 platforms
- Add i2c and cd321x nodes
- Bindings for apple,wdt
- PMGR bindings and DT updates to instantiate it
- WiFi MAC address DT handling
This also includes the MAINTAINERS change for the PMGR driver itself, to
avoid merge issues; the driver will be sent in a different pull.
Manual fixups: Added i2c power domain references to the PMGR DT commit,
since a prior commit added the i2c nodes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYa7mWAAKCRClhN6SrnTN
2OcWAP0SeheFWsBVf4H2ePIrHQ87NzCYi9Nb35SSSgBFVRsGXgEAu+H8kTbUMVVh
kPJyeAwtuksqf2W5t45ziIWz+W4k5wI=
=Wxou
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QggY
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux into arm/dt
Apple SoC DT updates for 5.17:
- Separate DTs for all t8103 platforms
- Add i2c and cd321x nodes
- Bindings for apple,wdt
- PMGR bindings and DT updates to instantiate it
- WiFi MAC address DT handling
This also includes the MAINTAINERS change for the PMGR driver itself, to
avoid merge issues; the driver will be sent in a different pull.
Manual fixups: Added i2c power domain references to the PMGR DT commit,
since a prior commit added the i2c nodes.
* tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8103: Expose PCI node for the WiFi MAC address
arm64: dts: apple: t8103: Add UART2
arm64: dts: apple: t8103: Add PMGR nodes
dt-bindings: arm: apple: Add apple,pmgr binding
dt-bindings: power: Add apple,pmgr-pwrstate binding
MAINTAINERS: Add PMGR power state files to ARM/APPLE MACHINE
dt-bindings: watchdog: Add Apple Watchdog
dt-bindings: interrupt-controller: apple,aic: Add power-domains property
dt-bindings: pinctrl: apple,pinctrl: Add power-domains property
dt-bindings: iommu: apple,dart: Add power-domains property
dt-bindings: i2c: apple,i2c: Add power-domains property
arm64: dts: apple: t8103: Add cd321x nodes
arm64: dts: apple: t8103: Add i2c nodes
arm64: dts: apple: Add missing M1 (t8103) devices
dt-bindings: arm: apple: Add iMac (24-inch 2021) to Apple bindings
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: dts: apple: change ethernet0 device type to ethernet
Link: https://lore.kernel.org/r/e18b476c-7b1f-de73-53a2-0e21fb5cd283@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Steven Maddox reported in the OpenWrt bugzilla, that his
RaidSonic IB-NAS4220-B was no longer booting with the new
OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was
working with the previous OpenWrt 19.07 series (uses 4.14).
|[ 5.548038] No RedBoot partition table detected in 30000000.flash
|[ 5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0
|[ 5.739093] No RedBoot partition table detected in 30000000.flash
|...
|[ 7.039504] Waiting for root device /dev/mtdblock3...
The provided bootlog shows that the RedBoot partition parser was
looking for the partition table "at offset 0x0". Which is strange
since the comment in the device-tree says it should be at 0xfe0000.
Further digging on the internet led to a review site that took
some useful PCB pictures of their review unit back in February 2009.
Their picture shows a Spansion S29GL128N11TFI01 flash chip.
>From Spansion's Datasheet:
"S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors"
Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his
unit: "131072".
With the 128 KiB Sector/Erasesize in mind. This patch changes the
fis-index-block property to (0xfe0000 / 0x20000) = 0x7f.
Fixes: b5a923f8c7 ("ARM: dts: gemini: Switch to redboot partition parsing")
Reported-by: Steven Maddox <s.maddox@lantizia.me.uk>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Steven Maddox <s.maddox@lantizia.me.uk>
Link: https://lore.kernel.org/r/20211206004334.4169408-1-linus.walleij@linaro.org'
Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SPEAr320s SOC is a SPEAr320 SOC variant.
Mostly identical to the SPEAr320 SOC variant, it has a
new interrupt routing for PL_PGIOs.
Add spear320s.dtsi to handle SPEAr320s SOC
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20211202095255.165797-7-herve.codina@bootlin.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Resources used by plgpio and pinmux are conflicting on SPEAr310
and SPEAr320.
Use the newly introduced regmap property in plgpio node to use
pinmux resources from plgpio and so avoid the conflict.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20211202095255.165797-5-herve.codina@bootlin.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch fixes the Bluetooth on ROCK Pi 4 boards.
ROCK Pi 4 boards has BCM4345C5 and now it is supported
on Mainline Linux, brcm,bcm43438-bt still working but
observed the BT Audio issues with latest test.
So, use the BCM4345C5 compatible and its associated
properties like clock-names as lpo and max-speed.
Attach vbat and vddio supply rails as well.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20211112142359.320798-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add second DSI compatible to comply with DT schema validation
comming in the second patch.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211211233818.88482-1-david@ixit.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Quartz64 Model A has the SPI pins broken out on its pin
header. The actual pins being used though are not the m0
variant, but the m1 variant, which also lacks the cs1 pin.
This commit overrides pinctrl-0 accordingly for this board.
spi1 is intentionally left disabled, as anyone wishing to add
SPI devices needs to edit the dts anyway, and the pins are more
useful as GPIOs for the rest of the users.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211127141910.12649-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds the four spi nodes (spi0, spi1, spi2, spi3) to the
rk356x dtsi. These are from the downstream device tree, though
I have double-checked that their interrupts and DMA numbers are
correct. I have also tested spi1 with an SPI device.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211127141910.12649-3-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Expose the PCI node corresponding to the WiFi device and give it
a 'local-mac-address' property. The bootloader will update it
(m1n1 already has the required feature).
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This UART is connected to the debug port of the WLAN module. It is
mostly useless, but makes for a good test case for runtime-pm without
having to unbind the console from the main system UART.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds the two PMGR nodes and all known power state subnodes. Since
there are a large number of them, let's put them in a separate file to
include.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
The PMGR block in Apple Silicon SoCs is responsible for SoC power
management. There are two PMGRs in T8103, with different register
layouts but compatible registers. In order to support this as well
as future SoC generations with backwards-compatible registers, we
declare these blocks as syscons and bind to individual registers
in child nodes. Each register controls one SoC device.
The respective apple compatibles are defined in case device-specific
quirks are necessary in the future, but currently these nodes are
expected to be bound by the generic syscon driver.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This syscon child node represents a single SoC device controlled by the
PMGR block. This layout allows us to declare all device power state
controls (power/clock gating and reset) in the device tree, including
dependencies, instead of hardcoding it into the driver. The register
layout is uniform.
Each pmgr-pwrstate node provides genpd and reset features, to be
consumed by downstream device nodes.
Future SoCs are expected to use backwards compatible registers, and the
"apple,pmgr-pwrstate" represents any such interfaces (possibly with
additional features gated by the more specific compatible), allowing
them to be bound without driver updates. If a backwards incompatible
change is introduced in future SoCs, it will require a new compatible,
such as "apple,pmgr-pwrstate-v2".
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This covers the PMGR power state driver and its DT bindings,
as well as any other future stuff in drivers/soc/apple.
Signed-off-by: Hector Martin <marcan@marcan.st>
Apple SoCs come with a simple embedded watchdog. This watchdog is also
required in order to reset the SoC.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
This will bind to the PMGR pwrstate nodes that control power/clock
gating to SoC blocks. The AIC driver doesn't do runtime-pm and likely
never will (since it is system-critical), but it makes sense to describe
the power domain relationship the devicetree properly.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This will bind to the PMGR pwrstate nodes that control power/clock
gating to SoC blocks. The pinctrl driver doesn't do runtime-pm yet, so
initially this will just keep the domain on permanently.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This will bind to the PMGR pwrstate nodes that control power/clock
gating to SoC blocks. The DART driver doesn't do runtime-pm yet, so
initially this will just keep the domain on permanently.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This will bind to the PMGR pwrstate nodes that control power/clock
gating to SoC blocks. The i2c driver doesn't do runtime-pm yet, so
initially this will just keep the domain on permanently.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
All M1 Mac devices have 2 SoC connected USB-C ports and use cd321x USB
type C port switch and power deliver controllers. I2c bus and addresses
configuration are for all devices equal.
The iMac (24-inch, 2021) has a configuration with 2 additional USB-C
ports (j456) using two additional cd321x controllers.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Apple M1 has at least 5 i2c controllers. i2c0, i2c1 and i2c3 are used
on all M1 Mac devices. The 2020 Mac Mini uses i2c2 and the 13-inch
MacBook Pro uses i2c2 and i2c4.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds support for following Apple M1 devices:
- MacBook Pro (13-inch, M1, 2020)
- MacBook Air (M1, 2020)
- iMac (24-inch 2021)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Required for devices trying to use pinctrl devices as interrupt
controller.
Fixes: 0a8282b831 ("arm64: apple: Add pinctrl nodes")
Signed-off-by: Janne Grunau <j@jannau.net>
Cc: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
The intention was to have a SoC-specific and base compatible string
to allow forward compatibility and SoC specific quirks,
Fixes: df7c4a8c1b ("dt-bindings: i2c: Add Apple I2C controller bindings")
Signed-off-by: Janne Grunau <j@jannau.net>
Cc: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Hector Martin <marcan@marcan.st>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
The remote endpoint for the hdmi connector is specfied through a
reference to the hdmi0_con endpoint, which is in the same file.
Simplify by specifying the remote-endpoint directly in the hdmi0_con
endpoint.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20211124152815.3926961-3-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The remote endpoint for the hdmi connector is specfied through a
reference to the hdmi0_con endpoint, which is in the same file.
Simplify by specifying the remote-endpoint directly in the hdmi0_con
endpoint.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20211124152815.3926961-2-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rename the below SDHI clocks to match with the clocks used in driver.
imclk->core
clk_hs->clkh
imclk2->cd
Also re-arrange the clocks to match with the sorting order used in the
binding document.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20211122103905.14439-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rename the below RZ/G2L clocks to match with the clock names used in
R-Car Gen2 and later generations.
imclk->core
clk_hs->clkh
imclk2->cd
This changes will avoid using fallback for RZ/G2L high speed clock,
if "clkh" is not used in device tree and also the code changes in
driver related to this clocks.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20211122103905.14439-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes make dtbs_check errors for t8103-j274.dts due to missing pci
properties.
Fixes: e1bebf9781 ("arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address")
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
The new reset controller makes is possible to add reset lines to a host
of IP blocks in the DB8500/U8500.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
