Rename the `omnia_mcu_gpio_templates` variable to
`omnia_mcu_gpio_names`. The array contained templates for the names
during the development of the driver, but the template prefix `gpio%u.`
was dropped before the driver was merged, since this functionality was
broken in gpiolib.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add more comprehensive documentation for the driver private data
structure, `struct omnia_mcu`.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add more comprehensive documentation for the driver private data
structure, `struct mox_rwtm`.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- knav_qmss_queue: Cleanups around request_irq params and redundant code.
- ti_sci: Power management ops in preperation for suspend/resume capability.
Also includes dependency patch to export dev_pm_qos_read_value
(acked by Rafael).
-----BEGIN PGP SIGNATURE-----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=xIlb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Y17E
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.13
- knav_qmss_queue: Cleanups around request_irq params and redundant code.
- ti_sci: Power management ops in preperation for suspend/resume capability.
Also includes dependency patch to export dev_pm_qos_read_value
(acked by Rafael).
* tag 'ti-driver-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Remove use of of_match_ptr() helper
firmware: ti_sci: add CPU latency constraint management
firmware: ti_sci: Introduce Power Management Ops
firmware: ti_sci: Add system suspend and resume call
firmware: ti_sci: Add support for querying the firmware caps
PM: QoS: Export dev_pm_qos_read_value
soc: ti: knav_qmss_queue: Drop redundant continue statement
soc: ti: knav_qmss_queue: Use IRQF_NO_AUTOEN flag in request_irq()
Link: https://lore.kernel.org/r/20241106121708.rso5wvc7wbhfi6xk@maverick
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Split the Amlogic reset-meson driver into platform and auxiliary
bus drivers. Add support for the reset controller in the G12 and
SM1 audio clock controllers.
* Replace the list of boolean parameters to the internal
reset_control_get functions with an enum reset_flags bitfield,
to make the code more self-descriptive.
* Add devres helpers to request pre-deasserted (and automatically
re-asserting during cleanup) reset controls. This allows reducing
boilerplate in drivers that deassert resets for the lifetime of a
device.
* Use the new auto-deasserting devres helpers in reset-uniphier-glue
as an example.
* Add support for the LAN966x PCI device in drivers/misc, as a
dependency for the following reset-microchip-sparx5 patches.
* Add support for being used on the LAN966x PCI device to the
reset-microchip-sparx5 driver.
Commit 86f134941a ("MAINTAINERS: Add the Microchip LAN966x PCI driver
entry") introduces a trivial merge conflict with commit 7280f01e79
("net: lan969x: add match data for lan969x") from the net-next tree [1].
[1] https://lore.kernel.org/all/20241101122505.3eacd183@canb.auug.org.au/
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCZyn4gxcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwFJZAP0fjXG07qnGp1Sgai/pmCesg5xJ
PAEL5/hKaYwQsAQHhwEAwaJg+kVeb74ez3ae4akyvngasJJT9LLDmqWEdxPIcw0=
=cyUW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczbWkACgkQYKtH/8kJ
UifcZQ/+O0Mek2EdY0VB0nFe3HIzFJU2RAdzAE2ivcwRwzsnpXz21UtYWnDjrIn7
eTPS6oOTKPbukP/fKwz/u7G7iXdM6VcrVJHfE58z5DqBNGGuou/+sRdTNU01XCrw
y/TmWwsppGbzpRZ6Wd3aAl6+PldLSNUIKSuDUZ87rpKw8XYzXSvFpd7FhJ8ZQ+sh
0U8E9o9bj0jwJoCT2azx4peiMnsJbFZON9a5DII/3BCEG/mYc+uO1Q0xJeaalawn
UCLDEsYi8+zNRYwoH7zBxLSDac2S/3k4KpzFXSWmY4JsCiRRh2x7/HFkt5+Mn27L
W4grUYsy1c2h3SvZAcs5KKSOZlJT3UtYtKRErVaruHAVkeBw7Cgg4pjm4qjOWdmv
ke4IOOl6VBgJS55ptFuWJdvCUY62IZfnchjlDcAfMy7BxsB7zxXlP4UaO2DzVLCv
KokE7dEB30jlwqfOMZQNMqw9OaGYQXv58FN6bXp5Te49oyEWuWoPTaQgQSbcUMf6
97wyTn8hDF1LwFRnHqued6lfv2BmZoX8ej4BDQ51wKU+ppgFOuFODD367rXJrka2
73fpbMf5WMHiIH2063d/ShXiwvowggbb7SeAprZFI9ZWCdj6YUSHKYTCDvgRVV9W
D/HjuoTHf4Y7ueD0oQSsOKycSqkEVjYpsOOD++rRzc7xnUmNBww=
=rxJh
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v6.13' of git://git.pengutronix.de/pza/linux into soc/drivers
Reset controller updates for v6.13
* Split the Amlogic reset-meson driver into platform and auxiliary
bus drivers. Add support for the reset controller in the G12 and
SM1 audio clock controllers.
* Replace the list of boolean parameters to the internal
reset_control_get functions with an enum reset_flags bitfield,
to make the code more self-descriptive.
* Add devres helpers to request pre-deasserted (and automatically
re-asserting during cleanup) reset controls. This allows reducing
boilerplate in drivers that deassert resets for the lifetime of a
device.
* Use the new auto-deasserting devres helpers in reset-uniphier-glue
as an example.
* Add support for the LAN966x PCI device in drivers/misc, as a
dependency for the following reset-microchip-sparx5 patches.
* Add support for being used on the LAN966x PCI device to the
reset-microchip-sparx5 driver.
Commit 86f134941a ("MAINTAINERS: Add the Microchip LAN966x PCI driver
entry") introduces a trivial merge conflict with commit 7280f01e79
("net: lan969x: add match data for lan969x") from the net-next tree [1].
[1] https://lore.kernel.org/all/20241101122505.3eacd183@canb.auug.org.au/
* tag 'reset-for-v6.13' of git://git.pengutronix.de/pza/linux: (21 commits)
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
reset: mchp: sparx5: set the dev member of the reset controller
reset: mchp: sparx5: Allow building as a module
reset: mchp: sparx5: Add MCHP_LAN966X_PCI dependency
reset: mchp: sparx5: Map cpu-syscon locally in case of LAN966x
MAINTAINERS: Add the Microchip LAN966x PCI driver entry
misc: Add support for LAN966x PCI device
reset: uniphier-glue: Use devm_reset_control_bulk_get_shared_deasserted()
reset: Add devres helpers to request pre-deasserted reset controls
reset: replace boolean parameters with flags parameter
reset: amlogic: Fix small whitespace issue
reset: amlogic: add auxiliary reset driver support
reset: amlogic: split the device core and platform probe
reset: amlogic: move drivers to a dedicated directory
reset: amlogic: add reset status support
reset: amlogic: use reset number instead of register count
reset: amlogic: add driver parameters
reset: amlogic: make parameters unsigned
reset: amlogic: use generic data matching function
...
Link: https://lore.kernel.org/r/20241105105229.3729474-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just couple of main additions:
1. Support for variable I/O width within ARM SCMI shared memory area.
Some shared memory areas might only support a certain access width,
such as 32-bit, which memcpy_{from,to}_io() does not adhere to at least
on ARM64 by making both 8-bit and 64-bit accesses to such memory.
This support updates the shmem layer to support reading from and
writing to such shared memory area using the specified I/O width
in the Device Tree. The various transport layers making use of the
shmem.c code are updated accordingly to pass the I/O accessors that
they store. The device tree bindings are also updated for the same.
2. Extension of SCMI transport bindings to add more properties
SCMI transports are characterized by a number of properties. The
values assumed by some of them tightly depend on the choices taken at
design time and on the overall archiecture of the specific platform:
things like timeouts, maximum message size and number of in-flight
messages are closely tied to the architecture of the platform like
number of SCMI agents on the system, physical memory available to the
SCMI platform and so on. Such details are not discoverable as they are
outside the scope of the SCMI protocol specification.
Currently such properties are simple default values defined at build
time, but the increasing number and variety of platforms using SCMI
with a wide range of designs has increased the need to have a way to
describe such properties across all these platforms.
Apart from the above two, there is one NULL pointer dereference fix for
very age old SCPI protocol driver which seems to be still in use on few
platforms.
-----BEGIN PGP SIGNATURE-----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=BbBY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rHuy
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.13
Just couple of main additions:
1. Support for variable I/O width within ARM SCMI shared memory area.
Some shared memory areas might only support a certain access width,
such as 32-bit, which memcpy_{from,to}_io() does not adhere to at least
on ARM64 by making both 8-bit and 64-bit accesses to such memory.
This support updates the shmem layer to support reading from and
writing to such shared memory area using the specified I/O width
in the Device Tree. The various transport layers making use of the
shmem.c code are updated accordingly to pass the I/O accessors that
they store. The device tree bindings are also updated for the same.
2. Extension of SCMI transport bindings to add more properties
SCMI transports are characterized by a number of properties. The
values assumed by some of them tightly depend on the choices taken at
design time and on the overall archiecture of the specific platform:
things like timeouts, maximum message size and number of in-flight
messages are closely tied to the architecture of the platform like
number of SCMI agents on the system, physical memory available to the
SCMI platform and so on. Such details are not discoverable as they are
outside the scope of the SCMI protocol specification.
Currently such properties are simple default values defined at build
time, but the increasing number and variety of platforms using SCMI
with a wide range of designs has increased the need to have a way to
describe such properties across all these platforms.
Apart from the above two, there is one NULL pointer dereference fix for
very age old SCPI protocol driver which seems to be still in use on few
platforms.
* tag 'scmi-updates-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
firmware: arm_scmi: Relocate atomic_threshold to scmi_desc
firmware: arm_scmi: Use max_msg and max_msg_size devicetree properties
dt-bindings: firmware: arm,scmi: Introduce more transport properties
firmware: arm_scmi: Calculate virtio PDU max size dynamically
firmware: arm_scmi: Account for SHMEM memory overhead
firmware: arm_scmi: Support 'reg-io-width' property for shared memory
dt-bindings: sram: Document reg-io-width property
firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
dt-bindings: firmware: arm,scmi: Add missing vendor string
firmware: arm_scmi: Reject clear channel request on A2P
firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier()
Link: https://lore.kernel.org/r/20241106110727.4007489-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/bus to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the MT8188 SoC in the MediaTek Regulator
Coupler driver, allowing stable GPU DVFS on this chip;
Moreover, this adds a new MediaTek DVFS Resource Collector (DVFSRC)
driver, allowing to enable other drivers (interconnect, regulator)
which can now communicate with the DVFSRC hardware.
Last but not least, this includes some cleanups for the CMDQ Helper
and MediaTek SVS drivers.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZyitDigcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4h1wA/1xT
8kHN16gVzZ6JvjvzOeipCi2YPJ0LCPv4jpvEx4abAP9tFsyVYsQGAE0XS74p3GRT
r9NhhlV7dnpQmVO/SPClDQ==
=cgv/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GKpu
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into arm/drivers
MediaTek soc driver updates for v6.13
This adds support for the MT8188 SoC in the MediaTek Regulator
Coupler driver, allowing stable GPU DVFS on this chip;
Moreover, this adds a new MediaTek DVFS Resource Collector (DVFSRC)
driver, allowing to enable other drivers (interconnect, regulator)
which can now communicate with the DVFSRC hardware.
Last but not least, this includes some cleanups for the CMDQ Helper
and MediaTek SVS drivers.
* tag 'mtk-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-svs: Call of_node_put(np) only once in svs_get_subsys_device()
soc: mediatek: mediatek-regulator-coupler: Support mt8188
soc: mediatek: mtk-cmdq: Move cmdq_instruction init to declaration
soc: mediatek: mtk-cmdq: Move mask build and append to function
soc: mediatek: Add MediaTek DVFS Resource Collector (DVFSRC) driver
dt-bindings: soc: mediatek: Add DVFSRC bindings for MT8183 and MT8195
Link: https://lore.kernel.org/r/20241104112625.161365-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Marek Vasut to probe soc-imx8m as platform driver,
so that it works properly with 'driver_async_probe' kernel parameter.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcoes8UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Lewf/d2egLTwCS8M7oN3IkZWBPZ4uGjbF
p1mKI1TcQgOmPpd9gvBbXRwt+lHIb7nn2Z3xrS5eNVP5iiWSInuB5czjUyy9Unwx
vF6Vp8r+QgzPJg5wmw/qIqRvjiC0yntiLa2hrVjNSYu1ox2mFGF+JR5WTh28SqVq
5vswGFiYEfkI773fpiOG9T6LIDovLjmvaahjXDJVERmihHe2OTnfxQ6lElmWov8R
zm9rl59sJALbVI0XFu/prEZtODEmzqw2HUEykNyxU3rs8xxsVg+F+QSQpA+nT8Po
3GC/wtL7KMIE9hyUPNXoEeNRTYT9Wbd45fPaegp57VAKQt+58G+XbFiSOA==
=KusR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AXrg
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers changes for 6.13:
- A series from Marek Vasut to probe soc-imx8m as platform driver,
so that it works properly with 'driver_async_probe' kernel parameter.
* tag 'imx-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: Use devm_* to simplify probe failure handling
soc: imx8m: Remove global soc_uid
soc: imx8m: Probe the SoC driver as platform driver
Link: https://lore.kernel.org/r/20241104090055.1881860-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtc generates the following warning when building the LAN966x devicetree
overlay (lan966x_pci.dtso):
Warning (interrupts_property): /fragment@0/__overlay__/pci-ep-bus@0/oic@e00c0120: Missing interrupt-parent
The oic interrupt parent is the PCI device itself. The PCI device node
is the node on which the dtbo will be applied and this node already has
properties needed.
In order to remove the warning, add the missing properties in the
overlay fragment node. Properties in this node will not be added when
the overlay is applied (which is what we expect) but makes dtc happy.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241025110919.64b1cffb@canb.auug.org.au/
Fixes: 185686beb4 ("misc: Add support for LAN966x PCI device")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241029084338.194942-3-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
dtc generates the following warnings when building the LAN966x device
tree overlay (lan966x_pci.dtso):
Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/cpu_clk: missing or empty reg/ranges property
Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/ddr_clk: missing or empty reg/ranges property
Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/sys_clk: missing or empty reg/ranges property
Indeed, related nodes are under the pci-ep-bus (simple-bus) which is not
correct.
Put them outside this node.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241025110919.64b1cffb@canb.auug.org.au/
Fixes: 185686beb4 ("misc: Add support for LAN966x PCI device")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241029084338.194942-2-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Enable QSEECOM, and thereby access to EFI variables, for Lenovo Yoga
Slim 7x, Dell XPS 13, Microsoft Surface Pro 9.
Last Level Cache Controller (LLCC) driver code is shuffled, to improve
readability of the tables.
The Qualcomm socinfo driver gains support for QCS615, QCS9100, SAR1130P,
SAR2130P, and SA8255P.
A few drivers are simplified using dev_err_probe() and guard(), and a
few kernel-doc issues are corrected.
Mentioning of the #linux-msm IRC channel is added to the MAINTAINERS
file.
-----BEGIN PGP SIGNATURE-----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=gpat
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XpFC
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v6.13
Enable QSEECOM, and thereby access to EFI variables, for Lenovo Yoga
Slim 7x, Dell XPS 13, Microsoft Surface Pro 9.
Last Level Cache Controller (LLCC) driver code is shuffled, to improve
readability of the tables.
The Qualcomm socinfo driver gains support for QCS615, QCS9100, SAR1130P,
SAR2130P, and SA8255P.
A few drivers are simplified using dev_err_probe() and guard(), and a
few kernel-doc issues are corrected.
Mentioning of the #linux-msm IRC channel is added to the MAINTAINERS
file.
* tag 'qcom-drivers-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (30 commits)
soc: qcom: socinfo: add QCS9100 ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS9100
dt-bindings: soc: qcom,aoss-qmp: Document the QCS8300 AOSS channel
dt-bindings: soc: qcom: add qcom,qcs8300-imem compatible
dt-bindings: firmware: qcom,scm: document SCM on QCS8300 SoCs
soc: qcom: socinfo: add support for SA8255P
dt-bindings: arm: qcom: add the SoC ID for SA8255P
soc: qcom: smp2p: Simplify code with dev_err_probe()
soc: qcom: smem: Simplify code with dev_err_probe()
soc: qcom: rpmh-rsc: Simplify code with dev_err_probe()
dt-bindings: soc: qcom: aoss-qmp: document support for SA8255p
dt-bindings: firmware: qcom,scm: document support for SA8255p
dt-bindings: soc: qcom,aoss-qmp: Add SAR2130P compatible
dt-bindings: firmware: qcom,scm: Add SAR2130P compatible
soc: qcom: socinfo: add SoC IDs for SAR1130P and SAR2130P
dt-bindings: arm: qcom,ids: add SoC ID for SAR2130P and SAR1130P
dt-bindings: soc: qcom: aoss-qmp: Add SM8750
soc: qcom: socinfo: Add QCS615 SoC ID table entry
dt-bindings: arm: qcom,ids: add SoC ID for QCS615
soc: qcom: smem: Fix up kerneldoc
...
Link: https://lore.kernel.org/r/20241102231953.871067-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Freescale IFC: Split handling of child nodes in the bindings to
fix dtbs_check warning.
2. ARM64 defconfig: Nothing selects CONFIG_FSL_IFC anymore since
commit 9ba0cae3ca ("memory: fsl_ifc: Make FSL_IFC config visible
and selectable") and actually CONFIG_MTD_NAND_FSL_IFC depends on it
now. Enable CONFIG_FSL_IFC in ARM64 defconfig, so users of it won't
lose these two drivers.
-----BEGIN PGP SIGNATURE-----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=kcGh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9+21
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v6.13
1. Freescale IFC: Split handling of child nodes in the bindings to
fix dtbs_check warning.
2. ARM64 defconfig: Nothing selects CONFIG_FSL_IFC anymore since
commit 9ba0cae3ca ("memory: fsl_ifc: Make FSL_IFC config visible
and selectable") and actually CONFIG_MTD_NAND_FSL_IFC depends on it
now. Enable CONFIG_FSL_IFC in ARM64 defconfig, so users of it won't
lose these two drivers.
* tag 'memory-controller-drv-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
arm64: defconfig: Update defconfig with now user-visible CONFIG_FSL_IFC
dt-bindings: memory-controllers: fsl,ifc: split child node differences
Link: https://lore.kernel.org/r/20241029075348.19580-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a revert for a patch that I had modified before applying
and the author didn't agree with the change.
-----BEGIN PGP SIGNATURE-----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=mwM+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=b7ib
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.13-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v6.13-rc1
This contains a revert for a patch that I had modified before applying
and the author didn't agree with the change.
* tag 'tegra-for-6.13-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
Revert "firmware: tegra: bpmp: Use scoped device node handling to simplify error paths"
Link: https://lore.kernel.org/r/20241025150555.2558582-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add the sysfs to show all HCCS types used on the platform
- Add the low power feature for HCCS by adjusting the lane number
- Few cleanups and improvements: correct a PCC typo, verify the die, port
information, base address and size, update the lane_mode to max_lane_num
-----BEGIN PGP SIGNATURE-----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=v3A3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AbzF
-----END PGP SIGNATURE-----
Merge tag 'hisi-drivers-for-6.13' of https://github.com/hisilicon/linux-hisi into arm/drivers
HiSilicon driver updates for v6.13
- Add the sysfs to show all HCCS types used on the platform
- Add the low power feature for HCCS by adjusting the lane number
- Few cleanups and improvements: correct a PCC typo, verify the die, port
information, base address and size, update the lane_mode to max_lane_num
* tag 'hisi-drivers-for-6.13' of https://github.com/hisilicon/linux-hisi:
soc: hisilicon: kunpeng_hccs: Support low power feature for the specified HCCS type
soc: hisilicon: kunpeng_hccs: Add used HCCS types sysfs
soc: hisilicon: kunpeng_hccs: Fix the 'lane_mode' field name in port info structure to 'max_lane_num'
soc: hisilicon: kunpeng_hccs: Add the check for base address and size of shared memory
soc: hisilicon: kunpeng_hccs: Return failure on having not die or port information
soc: hisilicon: kunpeng_hccs: Fix a PCC typo
Link: https://lore.kernel.org/r/671B3FBD.8050905@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/soc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way do a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Herve Codina <herve.codina@bootlin.com> # for fsl/qe/{qmc,tsa}.c
Acked-by: Bjorn Andersson <andersson@kernel.org> # qcom parts
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed
Link: https://lore.kernel.org/r/20241029074859.509587-2-u.kleine-koenig@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document the Always-On Subsystem side channel on the Qualcomm QCS8300
platform for communication with client found on the SoC such as
remoteprocs.
Signed-off-by: Kyle Deng <quic_chunkaid@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240911-qcs8300_binding-v2-4-de8641b3eaa1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document qcom,qcs8300-imem compatible. It has child node for debug
purpose.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240911-qcs8300_binding-v2-3-de8641b3eaa1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document scm compatible for the Qualcomm QCS8300 SoC. It is an interface
to communicate to the secure firmware.
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240911-qcs8300_binding-v2-2-de8641b3eaa1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-5-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-4-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-2-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add compatible for AOSS QMP representing support on SA8255p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240905192328.3778542-1-quic_nkela@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Relocate the atomic_threshold field to scmi_desc and move the related code
to scmi_transport_setup.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-6-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Override the default built-in max_msg and max_msg_size transport properties
when the corresponding properties were found to be described in the
devicetree.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-5-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Depending on specific hardware and firmware design choices, it may be
possible for different platforms to end up having different requirements
regarding the same transport characteristics.
Introduce max-msg-size and max-msg properties to describe such platform
specific transport constraints, since they cannot be discovered otherwise.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI virtio transport maximum PDU size is currently hardcoded at build
time; this will not play well with the possibile retrieval of a different
size at run-time.
Make the virtio transport derive the maximum PDU size from the max_msg_size
provided by the SCMI core.
No functional change.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Transports using shared memory have to consider the overhead due to the
layout area when determining the area effectively available for messages.
Till now, such definitions were ambiguos across the SCMI stack and the
overhead layout area was not considered at all.
Add proper checks in the shmem layer to validate the provided max_msg_size
against the effectively available memory area, less the layout.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some shared memory areas might only support a certain access width,
such as 32-bit, which memcpy_{from,to}_io() does not adhere to at least
on ARM64 by making both 8-bit and 64-bit accesses to such memory.
Update the shmem layer to support reading from and writing to such
shared memory area using the specified I/O width in the Device Tree. The
various transport layers making use of the shmem.c code are updated
accordingly to pass the I/O accessors that they store.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240827182450.3608307-3-florian.fainelli@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some SRAMs need to be accessed with a specific access width, define
the 'reg-io-width' property specifying such access sizes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240827182450.3608307-2-florian.fainelli@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The original optional property was missing a vendor string prefix; this
has been rectified.
Fix the naming of such optional property in code too.
Cc: Peng Fan <peng.fan@nxp.com>
Fixes: 1780e411ef ("firmware: arm_scmi: Use max-rx-timeout-ms from devicetree")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-8-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Recently introduced max-rx-timeout-ms optionao property is missing a
vendor prefix.
Add the vendor prefix so that it aligns with the new properties that
are about to get added soon.
Fixes: 3a5e6ab06e ("dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-7-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When OF support is disabled the of_device_id struct match table can be
conditionally compiled out, this helper allows the assignment to also be
turned into a NULL conditionally. When the of_device_id struct is not
conditionally defined based on OF then the table will be unused causing a
warning. The two options are to either set the table as _maybe_unused, or
to just remove this helper since the table will always be defined.
Do the latter here.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241015213322.2649011-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
During system-wide suspend, check if any of the CPUs have PM QoS
resume latency constraints set. If so, set TI SCI constraint.
TI SCI has a single system-wide latency constraint, so use the max of
any of the CPU latencies as the system-wide value.
Note: DM firmware clears all constraints at resume time, so
constraints need to be checked/updated/sent at each system suspend.
Co-developed-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-5-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Introduce power management ops supported by the TISCI
Low Power Mode API [1].
1) TISCI_MSG_LPM_WAKE_REASON
Get which wake up source woke the SoC from Low Power Mode.
The wake up source IDs will be common for all K3 platforms.
2) TISCI_MSG_LPM_SET_DEVICE_CONSTRAINT
Set LPM constraint on behalf of a device. By setting a constraint, the
device ensures that it will not be powered off or reset in the selected
mode.
3) TISCI_MSG_LPM_SET_LATENCY_CONSTRAINT
Set LPM resume latency constraint. By setting a constraint, the host
ensures that the resume time from selected mode will be less than the
constraint value.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[g-vlaev@ti.com: LPM_WAKE_REASON and IO_ISOLATION support]
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
[a-kaur@ti.com: SET_DEVICE_CONSTRAINT support]
Signed-off-by: Akashdeep Kaur <a-kaur@ti.com>
[vibhore@ti.com: SET_LATENCY_CONSTRAINT support]
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Akashdeep Kaur <a-kaur@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-4-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Introduce system suspend call that enables the ti_sci driver to support
low power mode when the user space issues a suspend to mem.
The following power management operations defined in the TISCI
Low Power Mode API [1] are implemented to support suspend and resume:
1) TISCI_MSG_PREPARE_SLEEP
Prepare the SOC for entering into a low power mode and
provide details to firmware about the state being entered.
2) TISCI_MSG_SET_IO_ISOLATION
Control the IO isolation for Low Power Mode.
Also, write a ti_sci_prepare_system_suspend call to be used in the driver
suspend handler to allow the system to identify the low power mode being
entered and if necessary, send TISCI_MSG_PREPARE_SLEEP with information
about the mode being entered.
Sysfw version >= 10.00.04 support LPM_DM_MANAGED capability [2], where
Device Mgr firmware now manages which low power mode is chosen. Going
forward, this is the default configuration supported for TI AM62 family
of devices. The state chosen by the DM can be influenced by sending
constraints using the new LPM constraint APIs.
In case the firmware does not support LPM_DM_MANAGED mode, the mode
selection logic can be extended as needed. If no suspend-to-RAM modes
are supported, return without taking any action.
We're using "pm_suspend_target_state" to map the kernel's target suspend
state to SysFW low power mode. Make sure this is available only when
CONFIG_SUSPEND is enabled.
Suspend has to be split into two parts, ti_sci_suspend() will send
the prepare sleep message to prepare suspend. ti_sci_suspend_noirq()
sets IO isolation which needs to be done as late as possible to avoid
any issues. On resume this has to be done as early as possible.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html
Co-developed-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-3-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add support for the TISCI_MSG_QUERY_FW_CAPS message, used to retrieve
the firmware capabilities of the currently running system firmware. The
message belongs to the TISCI general core message API [1] and is
available in SysFW version 08.04.03 and above. Currently, the message is
supported on devices with split architecture of the system firmware (DM
+ TIFS) like AM62x. Old revisions or not yet supported platforms will
NACK this request.
We're using this message locally in ti_sci.c to get the low power
features of the FW/SoC. As there's no other kernel consumers yet, this
is not added to struct ti_sci_core_ops.
Sysfw version >= 10.00.04 support LPM_DM_MANAGED capability [2], where
Device Mgr firmware now manages which low power mode is chosen. Going
forward, this is the default configuration supported for TI AM62 family
of devices. The state chosen by the DM can be influenced by sending
constraints using the new LPM constraint APIs.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html
[2] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html#tisci-msg-query-fw-caps
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
[vibhore@ti.com: Support for LPM_DM_MANAGED mode]
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-2-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Export the function dev_pm_qos_read_value(). Most other functions
mentioned in Documentation/power/pm_qos_interface.rst are already
exported, so export this one as well.
This function will be used to read the resume latency in a driver that
can also be compiled as a module.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/lkml/CAJZ5v0g1Ri_wKYppomE6RXqcZXRnX7bLOPMtsQaao0uchSfE9A@mail.gmail.com/
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-1-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Remove the statement "continue" at the end of the loop
where it becomes useless.
Problem found with Coccinelle static analysis tool,
using continue.cocci script
(coccinelle.gitlabpages.inria.fr/website/rules/continue.cocci)
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://lore.kernel.org/r/20240924214612.38854-1-alessandro.zanni87@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
As commit cbe16f35be ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")
said, reqeust_irq() and then disable_irq() is unsafe. In the small time gap
between request_irq() and disable_irq(), interrupts can still come.
IRQF_NO_AUTOEN flag can be used by drivers to request_irq(). It prevents
the automatic enabling of the requested interrupt in the same
safe way. With that the usage can be simplified and corrected.
Compile-tested only.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240914082532.344456-1-ruanjinjie@huawei.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This reverts commit 8812b8689e ("firmware: tegra: bpmp: Use scoped
device node handling to simplify error paths") because it was silently
modified by committer during commit process, by moving declaration of
'struct device_node *np' above the initializer/constructor. Such code
was not intention of the author, is not conforming to cleanup.h code
style and decreases the code readability.
I did not write such code and I did not agree to put my name with such
commit.
Original patch:
https://lore.kernel.org/all/20240816135722.105945-2-krzysztof.kozlowski@linaro.org/
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[treding@nvidia.com: shorten subject line]
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to guarantee the device will not be deleted by the reset
controller consumer, set the dev member of the reset controller.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20241014124636.24221-7-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
