Fix the function declaration so it is a single line. Fix CamelCase local
variable names:
busNo => bus_no
devNo => dev_no
Fix use of uuid_le_cmp() to check for 0 instead of using !uuid_le_cmp().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the function declaration so it is on a single line. Fix CamelCase local
variables:
busNo => bus_no
devNo => dev_no
Fix use of uuid_le_cmp() to check for 0 instead of using !uuid_le_cmp().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OK, lets clean up this messy function. The entire thing is reflowed so spacing
and indentation is correct. Tests that created extra indentation were swapped
for equivalent negative tests that did not create extra indentation. Use of
cmp_uuid_le() were fixed to test specifically for the zero case, and not to
lazily use !cmp_uuid_le(). CamelCase local variable names were fixed:
busNo => bus_no
devNo => dev_no
minSize => min_size
pReqHandler => req_handler
Away => cleanup
Finally, the struct guest_msgs cmd declaration was moved to the beginning of
the function, and cringing and wincing at the function was significantly
reduced.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the function definition so it's a single line. Remove the unnecessary
goto statements and just return directly. Remove the unneeded local variable
for the return result. Fix CamelCase parameters and local variable names:
channelAddr => ch_addr
channelBytes => ch_bytes
pChan => ch
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split the doubled assignment in uislib_mod_init() into two separate assignments.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of the extra parenthesis in uislib_enable_channel_interrupts().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the brackets in the else clause in Process_Incoming().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The if statement in info_debugfs_read() needs another set of brackets for the
else clause.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the line spacing errors in uislib.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the variable name rather than the type, and add a set of missing brackets
to the if statement in create_device().
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the missing braces and logical continuation problems in create_bus().
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix almost all of the parenthesis alignment problems in uislib.c. The 2
remaining issues are in create_device(), which is heavily indented and needs
to be refactored entirely anyway.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove all extraneous spaces from typecasts in uislib.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a comment to the charqueue's spinlock to explain that it is a lock for the
structure.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete the following unused types, and unused function prototypes:
VISORCHIPSET_SWITCH_INFO
VISORCHIPSET_EXTERNALPORT_INFO
VISORCHIPSET_INTERNALPORT_INFO
visorchipset_get_switch_info()
visorchipset_get_externalport_info()
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions in channels/* aren't used in a lot of places. In fact, the
functions in channel.c can be moved to uislib/uisqueue.c, and the rest
of the files in channels can be eliminated.
This patch deletes the channels directory and files, removes it from all
Kconfigs that referenced them, removes the reference in the Makefile,
and moves the functions inside of channels.c to uislib/uisqueue.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nobody is using this file so remove it and the reference to it in
visorchipset_main.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of the extra blank lines in globals.h.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just get rid of the extra blank lines in this file.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the MODULE_DESCRIPTION to something more useful than the generic
"Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This board supports interrupts on change of state of the digital inputs.
Add the necessary subdevice support and interrupt handler to allow async
commands to detect the change of state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This board supports interrupts on change of state of the digital inputs.
Introduce a helper function to enable/disable the interrupt. Use the new
helper function to ensure that interrupts are initially disabled during
the driver (*attach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The relay registers are readable. Read them during the attach to get
the initial state of the digital outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up the multi-line comments to follow the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, add some white space to the subdevice initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subdevice 1 is a digial input not a digital I/O subdevice.
Fix the type and, for aesthetics, rename the (*insn_bits) function used
to read the inputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subdevice 0 is a digial output not a digital I/O subdevice.
Fix the type and, for aesthetics, rename the (*insn_bits) function used
to set the outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fs/f2fs/trace.c:19:12: sparse: symbol 'pids_lock' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the normal case, the radix_tree_nodes are freed successfully.
But, when cp_error was detected, we should destroy them forcefully.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We use kzalloc to allocate memory in __recover_inline_status, and use this
all-zero memory to check the inline date content of inode page by comparing
them. This is low effective and not needed, let's check inline date content
directly.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: make the code more neat]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch aligns the start block address of a file for direct io to the f2fs's
section size.
Some flash devices manage an over 4KB-sized page as a write unit, and if the
direct_io'ed data are written but not aligned to that unit, the performance can
be degraded due to the partial page copies.
Thus, since f2fs has a section that is well aligned to FTL units, we can align
the block address to the section size so that f2fs avoids this misalignment.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two slab cache inode_entry_slab and winode_slab using the same
structure as below:
struct dir_inode_entry {
struct list_head list; /* list head */
struct inode *inode; /* vfs inode pointer */
};
struct inode_entry {
struct list_head list;
struct inode *inode;
};
It's a little waste that the two cache can not share their memory space for each
other.
So in this patch we remove one redundant winode_slab slab cache, then use more
universal name struct inode_entry as remaining data structure name of slab,
finally we reuse the inode_entry_slab to store dirty dir item and gc item for
more effective.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cleanup parameters for trace_f2fs_submit_{read_,write_,page_,page_m}bio with fio
as one parameter.
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds missing parameter _type_ for trace_f2fs_submit_page_bio, then
use DECLARE_EVENT_CLASS/DEFINE_EVENT_CONDITION pair to cleanup some trace event
code related to f2fs_submit_page_{m,}bio.
Additionally, after we remove redundant code, size of code can be reduced:
text data bss dec hex filename
176787 8712 56 185555 2d4d3 f2fs.ko.org
174408 8648 56 183112 2cb48 f2fs.ko
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In do_recover_data, we find and update previous node pages after updating
its new block addresses.
After then, we call fill_node_footer without reset field, we erase its
cold bit so that this new cold node block is written to wrong log area.
This patch fixes not to miss its old flag.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds block count by in-place-update in stat.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The __f2fs_add_link is covered by cp_rwsem all the time.
This calls init_inode_metadata, which conducts some acl operations including
memory allocation with GFP_KERNEL previously.
But, under memory pressure, f2fs_write_data_page can be called, which also
grabs cp_rwsem too.
In this case, this incurs a deadlock pointed by Chao.
Thread #1 Thread #2
down_read
down_write
down_read
-> here down_read should wait forever.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds two key functions to trace process ids and IOs.
The basic idea is to
1. remain process ids, pids, in page->private.
2. show pids in IO traces.
So, later we can retrieve process information according to IO traces.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
