The encoder ->prepare() and ->mode_set() methods need to use the
hw adjusted mode, not the original mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Ask the IPU display interface, via ipu_di_adjust_videomode(), to
adjust a video mode to meet any DI restrictions. The function takes
a subsystem independent videomode, so the drm_display_mode must be
converted to videomode first, and then the adjusted mode converted
back to a drm_display_mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add conversion from drm_display_mode to videomode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
h_total and v_total were calculated in ipu_di_init_sync_panel()
but never actually used. Remove.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On some monitors, high resolution modes are not working, exhibiting
pixel column truncation problems (for example, 1280x1024 displays as
1280x1022).
The function ipu_di_adjust_videomode() aims to fix these issues by
adjusting a passed videomode to IPU restrictions. The function can
be called from the drm_crtc_helper_funcs->mode_fixup() methods.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Deepak Das <deepak_das@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use snd_soc_runtime_set_dai_fmt() to configure the format for the DAI link
rather than configuring each DAI individually.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_soc_runtime_set_dai_fmt() to configure the format for the DAI link
rather than configuring each DAI individually.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For some setups it is necessary to change the DAI link format at runtime.
This patch factors out the code that does the initial static DAI link format
configuration into a separate helper function which can be used board
drivers as well.
This allows board drivers that have to change the DAI link format at runtime
to reuse it instead of having to manually change the format on all DAIs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are more that one SPI controller on the Intel MID boards. This patch
describes the status and IDs of them. From now on we also have to care about
bus number that must be unique per host.
According to the specification the SPI1 has 5 bits for chip selects and SPI2
only 2 bits. The patch makes it depend to PCI ID.
The first controller (SPI1) is DMA capable, meanwhile SPI2 can share same
channels (via software switch) such functionality is not in the scope of this
patch. Thus, attempt to init DMA for SPI2 will always fail for now.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When autodetection is used it would be useful to know what the FIFO size is.
The patch adds a debug message for this purpose.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of warning message in ->probe() we have to use HW device name instead
of master because last is not defined yet.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the function get_gdma_dev() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove the function omap_32k_timer_read() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove the function irq_bank_readl() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Removes some functions that are not used anywhere:
omap_pm_set_max_dev_wakeup_lat() omap_pm_if_exit() omap_pm_cpu_get_freq()
omap_pm_cpu_set_freq() omap_pm_cpu_get_freq_table() omap_pm_dsp_get_opp()
omap_pm_dsp_set_min_opp() omap_pm_dsp_get_opp_table()
omap_pm_set_min_clk_rate() omap_pm_set_max_sdma_lat()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Removes some functions that are not used anywhere:
omap_change_voltscale_method() voltdm_add_pwrdm()
voltdm_for_each() voltdm_for_each_pwrdm()
And remove define VOLTSCALE_VPFORCEUPDATE and VOLTSCALE_VCBYPASS
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Removes some functions that are not used anywhere:
pwrdm_get_voltdm() pwrdm_for_each_clkdm() pwrdm_del_clkdm()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Removes some functions that are not used anywhere:
omap_hwmod_pad_route_irq() omap_hwmod_no_setup_reset()
omap_hwmod_read_hardreset() omap_hwmod_del_initiator_dep()
omap_hwmod_enable_clocks() omap_hwmod_reset() omap_hwmod_ocp_barrier()
omap_hwmod_disable_clocks() omap_hwmod_add_initiator_dep()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove the function omap4_dpllmx_gatectrl_read() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Removes some functions that are not used anywhere:
am33xx_cm_read_reg_bits() am33xx_cm_clear_reg_bits() am33xx_cm_set_reg_bits()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Verify that the frequency value from userspace is valid and makes sense.
Unverified values can cause overflows later on.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: Fix up bug for negative values and drop redunent cap check]
Signed-off-by: John Stultz <john.stultz@linaro.org>
An unvalidated user input is multiplied by a constant, which can result in
an undefined behaviour for large values. While this is validated later,
we should avoid triggering undefined behaviour.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: include trivial milisecond->microsecond correction noticed
by Andy]
Signed-off-by: John Stultz <john.stultz@linaro.org>
We store it in the tag set, we don't need it in the hardware queue.
While removing cmd_size, place ->queue_num further down to avoid
a hole on 64-bit archs. It's not used in any fast paths, so we
can safely move it.
Signed-off-by: Jens Axboe <axboe@fb.com>
On Cherrytrail and Braswell, the I2S BCLK is 100FS which cannot be supported
by RT5672 in slave mode and can cause noise. This patch selects codec ASRC
clock source to track I2S1 clock so that codec ASRC can be enabled to suppress
the noise.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Reviewed-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When codec is in slave mode, ASRC can suppress noise for asynchronous
MCLK and LRCLK or special I2S format. This patch defines an API to select
the clock source for specified filters. And the codec driver will turn on ASRC
for these filters if ASRC is selected as their clock source.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous definition of registers 0x84 and 0x85 doesn't match the datasheet.
So this patch removes the wrong definition and writes a new one for the two
registers.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To build the rockchip dw_hdmi driver as a module, the
rockchip_drm_encoder_get_mux_id and rockchip_drm_crtc_mode_config
functions need to be exported.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Otherwise a spurious interrupt might trigger (and crash) the interrupt handler
before probing finished.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We should not send IPC stream commands to FW when the stream is
NULL, dereference the NULL pointer may also occur without precheck.
Here add NULL pointer checks for these stream APIs.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rockchip RK3288 hdmi is compatible with dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
RK3288 HDMI will not work without the spare bit of
HDMI_PHY_CONF0 enable
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
HDMI_IH_I2CMPHY_STAT0 is a clear on write register, which indicates i2cm
operation status(i2c transfer done or error), every hdmi phy register
configuration must check this register to make sure the configuration
has complete. But the indication bit should be cleared after check, otherwise
the corresponding bit will hold on forever, this may give a wrong signal for
next check.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
some platform may not support all the display mode,
add mode_valid interface check it
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On rockchip rk3288, only word(32-bit) accesses are
permitted for hdmi registers. Byte width accesses (writeb,
readb) generate an imprecise external abort.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
the original imx hdmi driver is under drm/imx/,
which depends on imx-drm, so move the imx hdmi
driver out to drm/bridge and rename it to dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There's no need to use the synchronous version.
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current vfio-pci just supports normal pci device, so vfio_pci_probe() will
return if the pci device is not a normal device. While current code makes a
mistake. PCI_HEADER_TYPE is the offset in configuration space of the device
type, but we use this value to mask the type value.
This patch fixs this by do the check directly on the pci_dev->hdr_type.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org # v3.6+
Sometimes we wish to tweak how an individual context behaves. Since we
always create a context for every filp, this means that individual
processes can fine tune their behaviour even if they do not explicitly
create a context.
The first example parameter here is to enable multi-process GPU testing,
but the interface should be able to cope with passing arbitrarily complex
parameters.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Testcase: igt/gem_reset_stats/ban-period-*
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It is platform/output depenedent when exactly the pipe will start
running. Sometimes we just need the (cpu) pipe enabled, in other cases
the pch transcoder is enough and in yet other cases the (DP) port is
sending the frame start signal.
In a perfect world we'd put the drm_crtc_vblank_on call exactly where
the pipe starts running, but due to cloning and similar things this
will get messy. And the current approach of picking the most
conservative place for all combinations also doesn't work since that
results in legit vblank waits (in encoder->enable hooks, e.g. the 2
vblank waits for sdvo) failing.
Completely going back to the old world before
commit 51e31d49c8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Sep 15 12:36:02 2014 +0200
drm/i915: Use generic vblank wait
isn't great either since screaming when the vblank wait work because
the pipe is off is kinda nice.
Pick a compromise and move the drm_crtc_vblank_on right before the
encoder->enable call. This is a lie on some outputs/platforms, but
after the ->enable callback the pipe is guaranteed to run everywhere.
So not that bad really. Suggested by Ville.
v2: Same treatment for drm_crtc_vblank_off and encoder->disable: I've
missed the ibx pipe B select w/a, which also has a vblank wait in the
disable function (while the pipe is obviously still running).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Removes some functions that are not used anywhere:
omap2_clk_apll54_disable() omap2_clk_apll96_disable()
omap2_clk_apll54_enable() omap2_clk_apll96_enable() omap2xxx_get_apll_clkin()
omap2_clk_apll96_recalc() omap2_clk_apll54_recalc()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
[tony@atomide.com: updated to fix a build warning]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit documents the fact that it is not safe to use bitfields
as shared variables in synchronization algorithms. It also documents
that CPUs must be able to concurrently load from and store to adjacent
one-byte and two-byte variables, which is in fact required by the
C11 standard (Section 3.14).
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Since other network components (and some drivers) uses the control block
provided in skb's, the network coding feature might wrongly assume that
an SKB has been decoded, and thus not try to code it with another packet
again. This happens for instance when batman-adv is running on a bridge device.
Fix this by clearing the control block for every received SKB.
Introduced by 3c12de9a5c
("batman-adv: network coding - code and transmit packets if possible")
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
