Commit graph

505,617 commits

Author SHA1 Message Date
Felipe Balbi
f2918ad89d usb: gadget: udc: document our sysfs ABI
I noticed that this has been missing for quite
some time so I decided it was about time to
document it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:01:00 -06:00
Andrzej Pietrasiewicz
3a57187085 usb: gadget: configfs: add suspend/resume
USB gadgets composed with configfs lack suspend and resume
methods. This patch uses composite_suspend()/composite_resume()
the same way e.g. composite_setup() or composite_disconnect()
are used in a configfs-based gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:59 -06:00
Dan Carpenter
60b388befb usb: gadget: f_uac1: remove an unneeded NULL check
This NULL check sets off a static checker warning because we already
dereferenced "card" earlier in the function.  However, since "card" is
never NULL so we can just remove the check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:59 -06:00
Felipe Balbi
0abd069698 usb: gadget: udc-core: call ->disconnect() when soft disconnecting
when disconnecting from host using our soft_connect
sysfs interface, also let the gadget driver know about
it by calling the gadget driver's ->disconnect()
method.

No problems have been found while not calling ->disconnect()
so far, it's just good convention.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:58 -06:00
Felipe Balbi
0b0231aa24 usb: dwc3: get rid of ->prepare()/->complete()
Using ->prepare()/->complete() to mask/unmask
IRQs is wrong at least for dwc3. We need to
make sure that by the end of ->resume(), IRQs
are working and ready to fire because a child
device may need working IRQs for its own ->resume()
method.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:58 -06:00
George Cherian
7ee2566ff5 usb: dwc3: dwc3-omap: get rid of ->prepare()/->complete()
Enabling the core interrupts in complete is too late for
XHCI, and stops it from proper operation. The root of the
problem is due to a disagreement between dwc3-omap and XHCI
about when IRQs should be enabled.

As it turns out, ->resume's documentation states that:

"... generally the driver is expected to start working
again, responding to hardware events and software requests
(the device itself may be left in a low-power state, waiting
for a runtime resume to occur) ..."

From that we infer that IRQs must be unmasked by the end of
->resume().

Due to that, we will remove ->prepare() and ->complete() and
disable/enable interrupts in ->suspend()/->resume().

Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:58 -06:00
Robert Jarzmik
1803fe15ad usb: gadget: pxa27x_udc: add devicetree support
Add support for device-tree device discovery. If devicetree is not
provided, fallback to legacy platform data "discovery".

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: devicetree@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:57 -06:00
Robert Jarzmik
3ec8347bfa usb: gadget: pxa27x_udc: transfer mach_info into pxa_udc
Convert the mach info, and store the udc_command in the pxa_udc control
structure.

It is to be noticed that the udc_is_connected() in mach info is not
transfered. This was not used, as mioa701 machine doesn't need it,
balloon3 doesn't really use it, and most importantly the current driver
never uses it.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:57 -06:00
Robert Jarzmik
2db88a7696 usb: gadget: pxa27x_udc: prepare device-tree support
For this preparation, a preliminary cleanup is done :
  - convert the probing of pxa27x_udc to gpio_desc.
    The conversion is partial because :
     - the platform data still provides a gpio number, not a gpio desc

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:57 -06:00
Yoshihiro Shimoda
420974a0ed usb: renesas_usbhs: add support for generic PHY
This patch adds support for the generic PHY. The generic PHY will be
used in multiplatform environment.

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:56 -06:00
Yoshihiro Shimoda
5f6aea3453 usb: renesas_usbhs: clean up rcar2.c to support a generic PHY
To support both usb PHY and generic PHY, this patch cleans up rcar2.c.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:56 -06:00
Yoshihiro Shimoda
c042b85a2c usb: renesas_usbhs: rename phy to usb_phy in usbhs_priv
To support a generic phy driver in this driver later, this patch
renames "struct usb_phy *phy" to "struct usb_phy *usb_phy".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:56 -06:00
Felipe Balbi
ccb072de57 usb: dwc3: ep0: trace ep0 TRBs too
Add TRB tracepoints for ep0 TRBs as that
might help finding bugs with ep0 handling.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:55 -06:00
Felipe Balbi
a7c12eaf2e usb: gadget: composite: conditionally dequeue os_desc and setup requests
In case we unload a gadget driver while any of
os_desc_req or req are still pending, we need
to make sure to dequeue them.

By using our setup_pending and os_desc_pending
flags we achieve that in a way that doesn't
cause any regressions because we won't dequeue
a request which was already completed.

The original idea came from Li Jun's commit
f2267089ea
(usb: gadget: composite: dequeue cdev->req
before free it in composite_dev_cleanup) which,
unfortunately, caused two regressions (kfree()
being called before usb_ep_dequeue() and calling
usb_ep_dequeue() when the request was already
completed). That commit also didn't take care
of os_desc_req which can fall into the same
situation so we must care for that one too.

Note that in order to make code slightly easier
to read, we introduce composite_ep_queue() which
hides details about how to fiddle with our pending
flags.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:55 -06:00
Felipe Balbi
57943716ff usb: gadget: composite: set our req->context to cdev
by doing that we will be able to match our
requests against req and os_desc_req and also
clear our pending flags from complete callback.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:55 -06:00
Felipe Balbi
6c93b53423 usb: gadget: composite: introduce setup and os_desc pending flags
These flags we be set to true whenever their
matching request is queued. They will be cleared
to false when that request completes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:54 -06:00
Heikki Krogerus
404905a604 usb: dwc3: add ACPI support
Adding ACPI ID used on newer Intel SoCs.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:54 -06:00
Heikki Krogerus
19bacdc925 usb: dwc3: core: only setting the dma_mask when needed
If the probe drivers have already set the dma_mask, not
replacing the value.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:53 -06:00
Felipe Balbi
dab716cd9a usb: dwc3: trace: remove unnecessary newline character
tracing infrastructure already adds those for us.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:53 -06:00
Felipe Balbi
fa0ea13e9f usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register
DWC3's GUID register is supposed to be used to write
any sort of version we might want. It helps when getting
bug reports for platforms you don't have HW to know
which kernel version of the driver was running on the
platform.

Because we don't really track driver version, but we _do_
track the kernel version, let's write LINUX_VERSION_CODE to
that register and use it for debugging.

Reviewed-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:53 -06:00
Javier Martinez Canillas
282179105d regulator: s2mpa01: zero-initialize regulator match table array
The struct of_regulator_match rmatch[] is declared as a non-static local
variable so the structure members are not auto-initialized.

Initialize the array at declaration time to avoid the structure members
values to be indeterminate and have sane defaults instead.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 15:56:16 +00:00
Javier Martinez Canillas
c9889803e3 regulator: max8660: zero-initialize regulator match table array
The struct of_regulator_match rmatch[] is declared as a non-static local
variable so the structure members are not auto-initialized.

Initialize the array at declaration time to avoid the structure members
values to be indeterminate and have sane defaults instead.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 15:55:53 +00:00
Javier Martinez Canillas
ecea7484d2 regulator: max77802: zero-initialize regulator match table
The struct of_regulator_match is declared as a non-static local variable
so the structure members are not auto-initialized.

Initialize the struct at declaration time to avoid the structure members
values to be indeterminate and have sane defaults instead.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 15:55:27 +00:00
Javier Martinez Canillas
050cf85c3f regulator: max77686: zero-initialize regulator match table
The struct of_regulator_match is declared as a non-static local variable
so the structure members are not auto-initialized.

Initialize the struct at declaration time to avoid the structure members
values to be indeterminate and have sane defaults instead.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 15:46:46 +00:00
Javier Martinez Canillas
d83aef13ad regulator: max1586: zero-initialize regulator match table array
The struct of_regulator_match rmatch[] is declared as a non-static local
variable so the structure members are not auto-initialized.

Initialize the array at declaration time to avoid the structure members
values to be indeterminate and have sane defaults instead.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 15:36:50 +00:00
Mark Brown
ebc01f593b Linux 3.18-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUVrf1AAoJEHm+PkMAQRiGtUkH/RX941uLQo0V+K0dy6LKD+Dv
 YmdmS7wQQ/Y5ji+qaaMgpqS1Fcjh7q1qXLSCstxiU42xVsulFKF1iA4fbesdmUvN
 zrtRYFCDPH2s0dycRfui9EW0ss/Bb3/l2aiRdpyzMBgwHa3Em2z74CdY9EPYkePW
 zozrNSwSt+iTSw9sg9SdaBiayV+jlFwJ+pgpjUccpRz3Ob7z5LlYtuLk4pITtFuw
 hc00bdCeduD0UJ3NC7WLS4USH5ZXZLkNB+OoteUw6srPUiDeaG0LefdV4D4J1eKe
 dcUXgoCMAqqc3a4PybC0sYBGumJmdaQwNVkh7RBLwUkQ0zjiuvbNcjSYfTG2yFs=
 =vR5Z
 -----END PGP SIGNATURE-----

Merge tag 'v3.18-rc3' into asoc-sgtl5000

Linux 3.18-rc3
2014-11-03 15:13:33 +00:00
Martin Kaiser
77d381af73 [media] lirc: use kfifo_initialized() on lirc_buffer's fifo
We can use kfifo_initialized() to check if the fifo in lirc_buffer is
initialized or not. There's no need to have a dedicated fifo status
variable in lirc_buffer.

[m.chehab@samsung.com: add the same change to lirc_zilog, to avoid
 breaking compilation of staging drivers]
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:53:05 -02:00
Dan Carpenter
373145282e [media] media: dvb_core: replace a magic number by a macro
It's better to use TS_SC instead of magic number 0xC0.

[m.chehab@samsung.com: patch rebased and message rewritten, as this
 patch conflicted with an already applied patch]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:50:08 -02:00
Sakari Ailus
fab9d30b7b [media] media: Print information on failed link validation
The Media controller doesn't tell much to the user in cases such as pipeline
startup failure. The link validation is the most common media graph (or in
V4L2's case, format) related reason for the failure. In more complex
pipelines the reason may not always be obvious to the user, so point them to
look at the right direction.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:45:58 -02:00
Linus Walleij
13d6a11af6 Rockchip-pinctrl fixes from Doug Anderson and suspend-specific
functions from Chris Zhong
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJUVpbfAAoJEPOmecmc0R2Bl14H/Rwmpp+KUPcudzSMpnfcqSKt
 s8B/EVa7I/eURz+5ZFg6kbkTYsT0N/81vGG3MbLT6609iHsxkfClYHkX2JQNBqIn
 mDYKCpbKPWxS0OrAhYPqG5ywiKEYWZb95DRRoXX7TKh7SFC+5nb/MC9gYtd0kKx4
 4fibILzOteN7Besvu+Ma8JkPJZR6/sebFkGj51Rpucff91qkiicy4nSEdCwSq2F5
 8neEX95FQlmf1rSPcdt2GY4hEvPAJBe9R2EPIaPy77p0uy3POmgMJNyK7d2b2dxU
 mV/AP2Pc71OPIfmKYP9LlWPP3AWS1thA8kFEEUjDJvaSVX5qbJggmptVFWQ884o=
 =/WZL
 -----END PGP SIGNATURE-----

Merge tag 'v3.19-rockchip-pinctrl1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into devel

Rockchip-pinctrl fixes from Doug Anderson and suspend-specific
functions from Chris Zhong
2014-11-03 15:41:27 +01:00
Joe Perches
f491dbe049 [media] dvb-net: Fix probable mask then right shift defects
Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.

Add parentheses around the mask.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:40:10 -02:00
Krzysztof Kozlowski
ca0c37a0b4 regulator: max77693: Fix use of uninitialized regulator config
Driver allocated on stack struct regulator_config but didn't initialize
it fully. Few fields (driver_data, ena_gpio) were left untouched. This
lead to using random ena_gpio values as GPIOs for max77693 regulators.

On occasion these values could match real GPIO numbers leading to
interfering with other drivers and to unsuccessful enable/disable of
regulator.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 80b022e29b ("regulator: max77693: Add max77693 regualtor driver.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 14:36:02 +00:00
Olli Salonen
e5f3d00c24 [media] cxusb: TS mode setting for TT CT2-4400
There is a new version of the TechnoTrend CT2-4400 USB tuner. The difference is the demodulator that is used (Si2168-B40 instead of -A30).

For TT CT2-4400v2 a TS stream related parameter needs to be set, otherwise the stream becomes corrupted. The Windows driver for both CT2-4400 and CT2-4400v2 sets this as well. After this patch the driver works for both versions.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:26:56 -02:00
Richard Vollkommer
dcc33cc57d [media] au8522: improve lock performance with ZeeVee modulators
Improves lock performance with signals from the ZeeVee family
of modulators.

Signed-off-by: Richard Vollkommer <linux@hauppauge.com>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:25:28 -02:00
Richard Vollkommer
52e269b133 [media] xc5000: add IF output level control
Adds control of the IF output level to the xc5000 tuner
configuration structure.  Increases the IF level to the
demodulator to fix failure to lock and picture breakup
issues (with the au8522 demodulator, in the case of the
Hauppauge HVR950Q).

This patch works with all XC5000 firmware versions.

Signed-off-by: Richard Vollkommer <linux@hauppauge.com>
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:24:52 -02:00
Sean Young
3e5907e695 [media] lirc_igorplugusb: remove
This driver has been replaced by an rc-core driver for the same hardware.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:19:30 -02:00
Sean Young
b1c97193c6 [media] rc: port IgorPlug-USB to rc-core
This is a complete re-write inspired by the original lirc driver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:18:25 -02:00
Markus Elfring
31604d35db ALSA: emu10k1: Deletion of unnecessary checks before three function calls
The functions kfree(), release_firmware() and snd_util_memhdr_free() test
whether their argument is NULL and then return immediately. Thus the test
around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-03 15:16:14 +01:00
nibble.max
4954578efb [media] m88ts2022: return the err code in its probe function when error occurs
if "chip_id" is wrong or "dev->cfg.clock_out" is invalid, the i2c model is still loaded.
It will cause "kernel NULL pointer dereference" oops when the i2c model remove.
returning the err code will prevent the i2c model load.

Signed-off-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 11:53:00 -02:00
nibble.max
070e66611d [media] cx23885: add DVBSky S950C and T980C RC support
DVBSky s950ci dvb-s/s2 ci PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>ci controller: CIMAX SP2 or its clone.
3>PCIe bridge: CX23885

The patchs are based on the following patchs.
Olli Salonen submit:
https://patchwork.linuxtv.org/patch/26180/
https://patchwork.linuxtv.org/patch/26183/
https://patchwork.linuxtv.org/patch/26324/
Nibble Max submit:
https://patchwork.linuxtv.org/patch/26207/

Signed-off-by: Nibble Max <nibble.max@gmail.com>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 11:52:08 -02:00
nibble.max
0e6c7b0117 [media] cx23885: add DVBSky S950C dvb-s/s2 ci PCIe card support(no RC)
DVBSky s950ci dvb-s/s2 ci PCIe card:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>ci controller: CIMAX SP2 or its clone.
3>PCIe bridge: CX23885

The patchs are based on the following patchs.
Olli Salonen submit:
https://patchwork.linuxtv.org/patch/26180/
https://patchwork.linuxtv.org/patch/26183/
https://patchwork.linuxtv.org/patch/26324/
Nibble Max submit:
https://patchwork.linuxtv.org/patch/26207/

Signed-off-by: Nibble Max <nibble.max@gmail.com>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 11:51:28 -02:00
Szymon Janc
a736abc1ac Bluetooth: Fix invalid response for 'Start Discovery' command
According to Management Interface API 'Start Discovery' command should
generate a Command Complete event on failure. Currently kernel is
sending Command Status on early errors. This results in userspace
ignoring such event due to invalid size.

bluetoothd[28499]: src/adapter.c:trigger_start_discovery()
bluetoothd[28499]: src/adapter.c:cancel_passive_scanning()
bluetoothd[28499]: src/adapter.c:start_discovery_timeout()
bluetoothd[28499]: src/adapter.c:start_discovery_complete() status 0x0a
bluetoothd[28499]: Wrong size of start discovery return parameters

Reported-by: Jukka Taimisto <jtt@codenomicon.com>
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-11-03 15:43:05 +02:00
nibble.max
24d333f387 [media] dvb-usb-dvbsky: add s960ci dvb-s/s2 usb ci box support
DVBSky s960ci dvb-s/s2 usb ci box:
1>dvb frontend: M88TS2022(tuner),M88DS3103(demod)
2>usb controller: CY7C86013A
3>ci controller: CIMAX SP2 or its clone.

Signed-off-by: Nibble Max <nibble.max@gmail.com>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 11:37:36 -02:00
Mauro Carvalho Chehab
8d6d514941 [media] Update Documentation cardlist
Some new devices got added. Update cardlists.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 11:35:01 -02:00
Witold Krecicki
eace972103 [media] em28xx: add support for Leadtek VC100 USB capture device
Leadtek VC100 is a simple USB capture stick, similar to
Yakumo Movie Mixer.

Signed-off-by: Witold Krecicki <wpk+lkml@culm.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 11:33:36 -02:00
Emmanuel Grumbach
31b8b343e0 iwlwifi: fix RFkill while calibrating
If the RFkill interrupt fires while we calibrate, it would
make the firmware fail and the driver wasn't able to recover.
Change the flow so that the driver will kill the firmware
in that case.

Since we have now two flows that are calling
trans_stop_device (the RFkill interrupt and the
op_mode_mvm_start function) - we need to better sync this.
Use the STATUS_DEVICE_ENABLED in the pcie transport in an
atomic way to achieve this.

This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=86231

CC: <stable@vger.kernel.org> [3.10+]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-03 15:29:17 +02:00
Johannes Berg
b8fff407a1 mac80211: fix use-after-free in defragmentation
Upon receiving the last fragment, all but the first fragment
are freed, but the multicast check for statistics at the end
of the function refers to the current skb (the last fragment)
causing a use-after-free bug.

Since multicast frames cannot be fragmented and we check for
this early in the function, just modify that check to also
do the accounting to fix the issue.

Cc: stable@vger.kernel.org
Reported-by: Yosef Khyal <yosefx.khyal@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-03 14:28:50 +01:00
Adel Gadllah
fa51ee1085 HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103
Yet another device that needs this quirk.

Reported-by: Tanguy de Baritault <tdebaritault@gmail.com>
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03 14:28:22 +01:00
Thomas Petazzoni
b5b7b48743 gpio: mvebu: add suspend/resume support
This commit adds the implementation of ->suspend() and ->resume()
platform_driver hooks in order to save and restore the state of the
GPIO configuration. In order to achieve that, additional fields are
added to the mvebu_gpio_chip structure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-03 14:28:03 +01:00
Dan Carpenter
3e7830ceb9 HID: logitech-hidpp: leaks and NULL dereferences
Shift the allocation down a few lines to avoid a memory leak and also
add a check for allocation failure.

Fixes: 2f31c52529 ('HID: Introduce hidpp, a module to handle Logitech hid++ devices')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03 14:26:50 +01:00