Commit graph

505,617 commits

Author SHA1 Message Date
Zoltan Kiss
44cc8ed17e xen-netback: Remove __GFP_COLD
This flag is unnecessary, it came from some old code.

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:59:37 -04:00
Zoltan Kiss
8fe78989c3 xen-netback: Disable NAPI after disabling interrupts
Otherwise the interrupt handler still calls napi_complete. Although it
won't schedule NAPI again as either NAPI_STATE_DISABLE or
NAPI_STATE_SCHED is set, it is just unnecessary, and it makes more
sense to do this way.

Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:59:37 -04:00
Kever Yang
49ed9ee442 clk: rockchip: change PLL setting for better clock jitter
dclk_vop0/1 is the source of HDMI TMDS clock in rk3288, usually we
use 594MHz for clock source of dclk_vop0/1.

HDMI CTS 7-9 require TMDS Clock jitter is lower than 0.25*Tbit:
TMDS clock(MHz)		CTS require jitter (ps)
	297		84.2
	148.5		168
	74.25		336
	27		1247

PLL BW and VCO frequency effects the jitter of PLL output clock,
clock jitter is better if BW is lower or VCO frequency is higher.

If PLL use default setting of RK3066_PLL_RATE( 594000000, 2, 198, 4),
the TMDS Clock jitter is higher than 250ps, which means we can't
pass the test when TMDS clock is 297MHz or 148.5MHz.

If we use RK3066_PLL_RATE_BWADJ(594000000, 1, 198, 8, 1),
the TMDS Clock jitter is about 60ps and we can pass all test case.

So we need this patch to make hdmi si test pass.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-10-29 20:27:20 +01:00
Nikolay Aleksandrov
d70127e8a9 inet: frags: remove the WARN_ON from inet_evict_bucket
The WARN_ON in inet_evict_bucket can be triggered by a valid case:
inet_frag_kill and inet_evict_bucket can be running in parallel on the
same queue which means that there has been at least one more ref added
by a previous inet_frag_find call, but inet_frag_kill can delete the
timer before inet_evict_bucket which will cause the WARN_ON() there to
trigger since we'll have refcnt!=1. Now, this case is valid because the
queue is being "killed" for some reason (removed from the chain list and
its timer deleted) so it will get destroyed in the end by one of the
inet_frag_put() calls which reaches 0 i.e. refcnt is still valid.

CC: Florian Westphal <fw@strlen.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McLean <chutzpah@gentoo.org>

Fixes: b13d3cbfb8 ("inet: frag: move eviction of queues to work queue")
Reported-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:21:30 -04:00
Nikolay Aleksandrov
65ba1f1ec0 inet: frags: fix a race between inet_evict_bucket and inet_frag_kill
When the evictor is running it adds some chosen frags to a local list to
be evicted once the chain lock has been released but at the same time
the *frag_queue can be running for some of the same queues and it
may call inet_frag_kill which will wait on the chain lock and
will then delete the queue from the wrong list since it was added in the
eviction one. The fix is simple - check if the queue has the evict flag
set under the chain lock before deleting it, this is safe because the
evict flag is set only under that lock and having the flag set also means
that the queue has been detached from the chain list, so no need to delete
it again.
An important note to make is that we're safe w.r.t refcnt because
inet_frag_kill and inet_evict_bucket will sync on the del_timer operation
where only one of the two can succeed (or if the timer is executing -
none of them), the cases are:
1. inet_frag_kill succeeds in del_timer
 - then the timer ref is removed, but inet_evict_bucket will not add
   this queue to its expire list but will restart eviction in that chain
2. inet_evict_bucket succeeds in del_timer
 - then the timer ref is kept until the evictor "expires" the queue, but
   inet_frag_kill will remove the initial ref and will set
   INET_FRAG_COMPLETE which will make the frag_expire fn just to remove
   its ref.
In the end all of the queue users will do an inet_frag_put and the one
that reaches 0 will free it. The refcount balance should be okay.

CC: Florian Westphal <fw@strlen.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McLean <chutzpah@gentoo.org>

Fixes: b13d3cbfb8 ("inet: frag: move eviction of queues to work queue")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Patrick McLean <chutzpah@gentoo.org>
Tested-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:21:30 -04:00
Tony Lindgren
4b91f7f3c8 ARM: OMAP2+: Warn about deprecated legacy booting mode
We're moving omaps to use device tree based booting and already have
omap2, omap4, omap5, am335x and am437x booting in device tree only
mode.

Only omap3 still has legacy booting still around and we really want
to make that device tree only. So let's add a warning about deprecated
legacy booting so we get people to upgrade their boards to use device
tree based booting and find out about any remaining issues.

Note that for most boards we already have the .dts file and those can
be booted with without changing the bootloader using the appended
DTB mode.

Acked-By: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-29 12:19:20 -07:00
Tony Lindgren
739fd50784 ARM: omap2plus_defconfig: Fix errors with NAND BCH
Looks like we need to have BCH enabled to get NAND
working and to avoid getting:

nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled

Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-29 12:19:20 -07:00
Erik Kline
7fd2561e4e net: ipv6: Add a sysctl to make optimistic addresses useful candidates
Add a sysctl that causes an interface's optimistic addresses
to be considered equivalent to other non-deprecated addresses
for source address selection purposes.  Preferred addresses
will still take precedence over optimistic addresses, subject
to other ranking in the source address selection algorithm.

This is useful where different interfaces are connected to
different networks from different ISPs (e.g., a cell network
and a home wifi network).

The current behaviour complies with RFC 3484/6724, and it
makes sense if the host has only one interface, or has
multiple interfaces on the same network (same or cooperating
administrative domain(s), but not in the multiple distinct
networks case.

For example, if a mobile device has an IPv6 address on an LTE
network and then connects to IPv6-enabled wifi, while the wifi
IPv6 address is undergoing DAD, IPv6 connections will try use
the wifi default route with the LTE IPv6 address, and will get
stuck until they time out.

Also, because optimistic nodes can receive frames, issue
an RTM_NEWADDR as soon as DAD starts (with the IFA_F_OPTIMSTIC
flag appropriately set).  A second RTM_NEWADDR is sent if DAD
completes (the address flags have changed), otherwise an
RTM_DELADDR is sent.

Also: add an entry in ip-sysctl.txt for optimistic_dad.

Signed-off-by: Erik Kline <ek@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:11:36 -04:00
David S. Miller
8b243a6194 Merge branch 'r8152-next'
Hayes Wang says:

====================
r8152: support nway_reset

Fix the CHECK from checkpatch.pl and support nway_reset.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:09:16 -04:00
hayeswang
8884f50780 r8152: support nway_reset of ethtool
Support the nway_reset() function for ethtool.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:09:08 -04:00
hayeswang
f37119c57b r8152: rename tx_underun
Replace tx_underun with tx_underrun for checkpatch.pl.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:09:08 -04:00
Tej Parkash
8f4eb70059 cnic: Update the rcu_access_pointer() usages
1. Remove the rcu_read_lock/unlock around rcu_access_pointer
2. Replace the rcu_dereference with rcu_access_pointer

Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:07:28 -04:00
Eric Dumazet
dca145ffaa tcp: allow for bigger reordering level
While testing upcoming Yaogong patch (converting out of order queue
into an RB tree), I hit the max reordering level of linux TCP stack.

Reordering level was limited to 127 for no good reason, and some
network setups [1] can easily reach this limit and get limited
throughput.

Allow a new max limit of 300, and add a sysctl to allow admins to even
allow bigger (or lower) values if needed.

[1] Aggregation of links, per packet load balancing, fabrics not doing
 deep packet inspections, alternative TCP congestion modules...

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yaogong Wang <wygivan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:05:15 -04:00
Linus Torvalds
d506aa68c2 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
 "A small collection of fixes for the current kernel.  This contains:

   - Two error handling fixes from Jan Kara.  One for null_blk on
     failure to add a device, and the other for the block/scsi_ioctl
     SCSI_IOCTL_SEND_COMMAND fixing up the error jump point.

   - A commit added in the merge window for the bio integrity bits
     unfortunately disabled merging for all requests if
     CONFIG_BLK_DEV_INTEGRITY wasn't set.  Reverse the logic, so that
     integrity checking wont disallow merges when not enabled.

   - A fix from Ming Lei for merging and generating too many segments.
     This caused a BUG in virtio_blk.

   - Two error handling printk() fixups from Robert Elliott, improving
     the information given when we rate limit.

   - Error handling fixup on elevator_init() failure from Sudip
     Mukherjee.

   - A fix from Tony Battersby, fixing up a memory leak in the
     scatterlist handling with scsi-mq"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Fix merge logic when CONFIG_BLK_DEV_INTEGRITY is not defined
  lib/scatterlist: fix memory leak with scsi-mq
  block: fix wrong error return in elevator_init()
  scsi: Fix error handling in SCSI_IOCTL_SEND_COMMAND
  null_blk: Cleanup error recovery in null_add_dev()
  blk-merge: recaculate segment if it isn't less than max segments
  fs: clarify rate limit suppressed buffer I/O errors
  fs: merge I/O error prints into one line
2014-10-29 11:57:10 -07:00
Heinz Mauelshagen
d20c4b08be dm raid: fix inaccessible superblocks causing oops in configure_discard_support
Commit 48cf06bc5f ("dm raid: add discard support for RAID levels 4, 5
and 6") did not properly handle missing metadata device(s).  A failing
read of the superblock causes the metadata and data devices to be
removed from the dev array in struct raid_set, setting references to
both devices to NULL.  configure_discard_support() nonetheless tries to
access the data dev unconditionally causing an oops.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-10-29 14:53:27 -04:00
Linus Torvalds
7f474df0a7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
 - workarounds for a couple of misbehaving Elan Touchscreens, by Adel
   Gadllah
 - fix for TransducerSerialNumber field implementation, by Jason Gerecke
 - a couple of new HID usages (added by HUT), by Olivier Gay

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: input: Fix TransducerSerialNumber implementation
  HID: add keyboard input assist hid usages
  HID: usbhid: enable always-poll quirk for Elan Touchscreen 016f
  HID: usbhid: enable always-poll quirk for Elan Touchscreen 009b
2014-10-29 11:52:35 -07:00
Roberto Medina
7aef06db0f net: ethernet: realtek: atp: checkpatch errors and warnings corrected
Several warnings and errors of coding style rules corrected.
Compile tested.

Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 14:52:06 -04:00
Hariprasad Shenai
cd03cf0158 cxgb4vf: Replace repetitive pci device ID's with right ones
Replaced repetive Device ID's which got added in commit b961f9a488
("cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro")

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 14:48:12 -04:00
Linus Torvalds
8c78293213 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Integrity subsystem fix from James Morris:
 "These changes fix a bug in xattr handling, where the evm and ima
  inode_setxattr() functions do not check for empty xattrs being passed
  from userspace (leading to user-triggerable null pointer
  dereferences)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  evm: check xattr value length and type in evm_inode_setxattr()
  ima: check xattr value length and type in the ima_inode_setxattr()
2014-10-29 11:47:42 -07:00
Toshiaki Makita
432c856fcf net: skb_segment() should preserve backpressure
This patch generalizes commit d6a4a10411 ("tcp: GSO should be TSQ
friendly") to protocols using skb_set_owner_w()

TCP uses its own destructor (tcp_wfree) and needs a more complex scheme
as explained in commit 6ff50cd555 ("tcp: gso: do not generate out of
order packets")

This allows UDP sockets using UFO to get proper backpressure,
thus avoiding qdisc drops and excessive cpu usage.

Here are performance test results (macvlan on vlan):

- Before
# netperf -t UDP_STREAM ...
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

212992   65507   60.00      144096 1224195    1258.56
212992           60.00          51              0.45

Average:        CPU     %user     %nice   %system   %iowait    %steal     %idle
Average:        all      0.23      0.00     25.26      0.08      0.00     74.43

- After
# netperf -t UDP_STREAM ...
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

212992   65507   60.00      109593      0     957.20
212992           60.00      109593            957.20

Average:        CPU     %user     %nice   %system   %iowait    %steal     %idle
Average:        all      0.18      0.00      8.38      0.02      0.00     91.43

[edumazet] Rewrote patch and changelog.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 14:47:19 -04:00
Sebastian Hesselbarth
e4fdc8e582 ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7
With SDHCI for BG2, we can now enable the port and allow to access
Samsung M8G2FA 8GB eMMC on Sony NSZ-GS7.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:47 +01:00
Sebastian Hesselbarth
acbcadc850 ARM: dts: berlin: Enable WiFi on Google Chromecast
With SDHCI for BG2CD, we can now enable the port and allow to access
AzureWave WiFi/BT module on Google Chromecast.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:46 +01:00
Sebastian Hesselbarth
652538c4d2 ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD
Marvell Berlin BG2 has three, BG2CD just one pxav3 compatible
sdhci controllers, add them to the corresponding DT SoC
includes.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:45 +01:00
Sebastian Hesselbarth
60daa9f71d ARM: dts: berlin: Enable ethernet on Sony NSZ-GS7
Marvell Berlin BG2 based Sony NSZ-GS7 has one ethernet controller
connected to rear RJ45 jack. Enable it by default.

Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:44 +01:00
Antoine Ténart
f5799dcf2c ARM: dts: berlin: Add phy-connection-type to BG2Q Ethernet
Internal FastEthernet PHY on BG2Q is connected via MII, add a
corresponding phy-connection-type property to the Ethernet node.

Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:43 +01:00
Sebastian Hesselbarth
631338af24 ARM: dts: berlin: Add BG2CD ethernet DT nodes
Marvell BG2CD has two fast ethernet controllers with internal PHY,
add the corresponding nodes to SoC dtsi.

Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:42 +01:00
Sebastian Hesselbarth
ae01f64baa ARM: dts: berlin: Add BG2 ethernet DT nodes
Marvell BG2 has two fast ethernet controllers with internal PHY,
add the corresponding nodes to SoC dtsi.

Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:42 +01:00
Sebastian Hesselbarth
297bb063b6 ARM: dts: berlin: Add GPIO leds to Google Chromecast
With GPIO support for Marvell Berlin, now add the two gpio-connected
LEDs on Google Chromecast.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:41 +01:00
Antoine Ténart
5a37d07185 ARM: dts: berlin: enable timer 1 for sched_clock
Enable timer 1 to be the source for the sched_clock, allowing to have a
more precise value than 1/HZ.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:40 +01:00
Antoine Ténart
1e27a26128 ARM: dts: berlin: add a required reset property in the chip controller node
The chip controller node now also describes the Marvell Berlin reset
controller. Add the required 'reset-cells' property.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:39 +01:00
Antoine Ténart
cdaea91019 Documentation: bindings: add reset bindings docs for Marvell Berlin SoCs
Add the reset binding documentation to the SoC binding documentation as
the reset driver in Marvell Berlin SoC is part of the chip/system
control registers. This patch adds the required properties to configure
the reset controller.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:38 +01:00
Antoine Ténart
e00ec0bd23 ARM: dts: berlin: enable the eSATA interface on the BG2Q DMP
The BG2Q has an AHCI SATA controller with an eSATA interface. Enable it.
Only enable the first port, the BG2Q DMP does not support the second one.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:34 +01:00
Antoine Ténart
70a2b717d0 ARM: dts: berlin: add the AHCI node for the BG2Q
The BG2Q has an AHCI SATA controller. Add the corresponding nodes
(AHCI, PHY) into its device tree.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-29 19:44:28 +01:00
Malcolm Priestley
89cf9be6e6 staging: vt6655: mac80211 conversion: s_uFillDataHead add power saving poll
Replace variable wCurrentRate with is_pspoll.

add current_aid to structure vnt_private which is to be used by
mac80211 operations.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-29 11:35:51 -07:00
Malcolm Priestley
7c0496d191 staging: vt6655: mac80211 conversion: s_vFillRTSHead convert to using struct ieee80211_hdr
Removing PSEthernetHeader

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-29 11:35:51 -07:00
Malcolm Priestley
9c71cb3209 staging: vt6655: dead code remove s_vFillFragParameter.
s_vFillFragParameter is nolonger used.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-29 11:35:51 -07:00
Malcolm Priestley
cfd9f0d6b1 staging: vt6655: mac80211 conversion: s_cbFillTxBufHead
Covert to handle mac80211 sk_buff data removing fragmentation processing
via s_vFillFragParameter and calls to vGenerateMACHeader and s_vSWencryption

fragmentation is now handled by mac80211.

There is still more todos with this function when legacy net device code
have been remove from driver.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-29 11:35:51 -07:00
Malcolm Priestley
01eec153ab staging: vt6655: mac8021 conversion: add new tx functions
vnt_fill_txkey a mac80211 repacement for s_vFillTxKey

vnt_generate_fifo_header mac80211 replacement for vGenerateFIFOHeader

vnt_beacon_make for making and despatching beacon.

vnt_beacon_enable to enabling beacon

struct vnt_tx_fifo_head is also added to replace typedef
struct tagSTxBufHead that will be removed later.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-29 11:35:51 -07:00
Malcolm Priestley
fee7506a12 staging: vt6655: mac80211 conversion: add new key functions
vnt_key_init_table to initialize the table

vnt_set_keys to set the keys

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-29 11:35:51 -07:00
Malcolm Priestley
33b1c8c13f staging: vt6655: mac80211 conversion: add new rx functions
vnt_receive_frame which replaces device_receive_frame

and vnt_rx_data which handles mac80211 rx data

structures ieee80211_hw, ieee80211_vif and variable rx_rate are added
in structure vnt_private

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-29 11:35:51 -07:00
Lubomir Rintel
b2ed64a974 ipv6: notify userspace when we added or changed an ipv6 token
NetworkManager might want to know that it changed when the router advertisement
arrives.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 14:35:32 -04:00
Matei Pavaluca
45b679c9a3 gianfar: Implement PAUSE frame generation support
The hardware can automatically generate pause frames when the number
of free buffers drops under a certain threshold, but in order to do this,
the address of the last free buffer needs to be written to a specific
register for each RX queue.

This has to be done in 'gfar_clean_rx_ring' which is called for each
RX queue. In order not to impact performance, by adding a register write
for each incoming packet, this operation is done only when the PAUSE frame
transmission is enabled.

Whenever the link is readjusted, this capability is turned on or off.

Signed-off-by: Matei Pavaluca <matei.pavaluca@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 14:33:16 -04:00
Pavaluca Matei-B46610
43ef8d29ee Fix the way the local advertising flow options are determined
Local flow control options needed in order to resolve the negotiation
are incorrectly calculated.

Previously 'mii_advertise_flowctrl' was called to determine the local advertising
options, but these were determined based on FLOW_CTRL_RX/TX flags which are
never set through ethtool.
The patch simply translates from ethtool flow options to mii flow options.

Signed-off-by: Pavaluca Matei <matei.pavaluca@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 14:33:16 -04:00
Pavaluca Matei-B46610
cf987afc7e Add flow control support flags to gianfar's capabilities
The phy device supports 802.3x flow control, but the specific flags are not set
in the phy initialisation code. Flow control flags need to be added to the
supported capabilities of the phydev by the driver.

This is needed in order for ethtool to work ('ethtool -A' code checks for these
flags)

Signed-off-by: Pavaluca Matei <matei.pavaluca@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 14:33:15 -04:00
WANG Cong
d56109020d sch_pie: schedule the timer after all init succeed
Cc: Vijay Subramanian <vijaynsu@cisco.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
2014-10-29 14:28:01 -04:00
Linus Torvalds
19be9e8aa7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
 "There's some bug fixes or cleanups to facilitate fixes, a MAINTAINERS
  update, and a new syscall (bpf)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  powerpc/numa: ensure per-cpu NUMA mappings are correct on topology update
  powerpc/numa: use cached value of update->cpu in update_cpu_topology
  cxl: Fix PSL error due to duplicate segment table entries
  powerpc/mm: Use appropriate ESID mask in copro_calculate_slb()
  cxl: Refactor cxl_load_segment() and find_free_sste()
  cxl: Disable secondary hash in segment table
  Revert "powerpc/powernv: Fix endian bug in LPC bus debugfs accessors"
  powernv: Use _GLOBAL_TOC for opal wrappers
  powerpc: Wire up sys_bpf() syscall
  MAINTAINERS: nx-842 driver maintainer change
  powerpc/mm: Remove redundant #if case
  powerpc/mm: Fix build error with hugetlfs disabled
2014-10-29 11:11:44 -07:00
Johannes Berg
171fdf77db mac80211-hwsim: remove spurious newline
This newline shouldn't be there, remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 18:43:39 +01:00
Ben Greear
e49786dbeb mac80211-hwsim: support SGI-20
This lets hostapd start if you have SGI-20 configured
as one of your HT capabilities.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 18:42:52 +01:00
Johannes Berg
fc1f48ffd5 cfg80211: fix integer signedness in chandef_primary_freqs()
The helper function can't ever create negative values, so use
u32 pointers as the function arguments as the caller does.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 18:42:51 +01:00
Fabian Frederick
dcc6c2f516 cfg80211: fix set but not used warning in nl80211_channel_switch()
radar_detect_width is unused since commit 97dc94f1d9
("cfg80211: remove channel_switch combination check")

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 18:42:51 +01:00