Commit graph

505,617 commits

Author SHA1 Message Date
Ben Greear
4f86ed8f87 mac80211-hwsim: add frequency attribute to netlink pkts
Add frequency attribute when sending to user-space over
netlink socket.  The frequency is currently ignored when
receiving from user-space.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 18:42:43 +01:00
Thomas Petazzoni
9ff0bb5ba6 ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn()
Since CONFIG_HIGHMEM got enabled on ARMv5 Kirkwood, we have noticed a
very significant drop in networking performance. The test were
conducted on an OpenBlocks A7 board. Without this patch, the outgoing
performance measured with iperf are:

 - highmem OFF, TSO OFF   544 Mbit/s
 - highmem OFF, TSO ON	  942 Mbit/s
 - highmem ON,  TSO OFF   306 Mbit/s
 - highmem ON,  TSO ON    246 Mbit/s

On this Kirkwood platform, the L2 cache is a Feroceon cache, and with
this cache, all the range operations have to be done on virtual
addresses and not physical addresses. Therefore, whenever
CONFIG_HIGHMEM is enabled, the cache maintenance operations call
kmap_atomic_pfn() and kunmap_atomic().

However, kmap_atomic_pfn() does not implement the same fast path for
non-highmem pages as the one implemented in kmap_atomic(), and this is
one of the reason for the performance drop. While this patch does not
fully restore the performances, it clearly improves them a lot:

      	      	        without patch  with patch

 - highmem ON, TSO OFF   306 Mbit/s     387 Mbit/s
 - highmem ON, TSO ON    246 Mbit/s     434 Mbit/s

We're still far from the !CONFIG_HIGHMEM performances, but it does
improve a bit the situation.

Thanks a lot to Ezequiel Garcia and Gregory Clement for all the
testing work around this topic.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-29 17:22:07 +00:00
Fabio Estevam
6d0ec1dd90 ARM: 8183/1: l2c: Improve l2c310_of_parse() error message
Russell King suggested [1]:

"I'd ask for one change.  Please make all these messages start with
"L2C-310 OF" not "PL310 OF:".  The device is described in ARM
documentation as a L2C-310 not PL310.  (Also note the : is dropped
too - most of the other messages don't have the : either.)

The:

"PL310 OF: cache setting yield illegal associativity
PL310 OF: -1073346556 calculated, only 8 and 16 legal"

message could also be changed to something like:

"L2C-310 OF cache associativity %d invalid, only 8 or 16 permittedn"

[1] http://www.spinics.net/lists/arm-kernel/msg372776.html

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-29 17:20:55 +00:00
Laura Abbott
005757298f ARM: 8181/1: Drop extra return statement
Commit 513510ddba
(common: dma-mapping: introduce common remapping functions)
managed to end up with an extra return statement from the
original patch. Drop it.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-29 17:20:51 +00:00
Paul E. McKenney
bbe5d7a93a rcu: Fix for rcuo online-time-creation reorganization bug
Commit 35ce7f29a4 (rcu: Create rcuo kthreads only for onlined CPUs)
contains checks for the case where CPUs are brought online out of
order, re-wiring the rcuo leader-follower relationships as needed.
Unfortunately, this rewiring was broken.  This apparently went undetected
due to the tendency of systems to bring CPUs online in order.  This commit
nevertheless fixes the rewiring.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-10-29 10:20:08 -07:00
Paul E. McKenney
776d680711 rcu: Kick rcuo kthreads after their CPU goes offline
If a no-CBs CPU were to post an RCU callback with interrupts disabled
after it entered the idle loop for the last time, there might be no
deferred wakeup for the corresponding rcuo kthreads.  This commit
therefore adds a set of calls to do_nocb_deferred_wakeup() after the
CPU has gone completely offline.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-10-29 10:20:07 -07:00
Pranith Kumar
28f6569ab7 rcu: Remove redundant TREE_PREEMPT_RCU config option
PREEMPT_RCU and TREE_PREEMPT_RCU serve the same function after
TINY_PREEMPT_RCU has been removed. This patch removes TREE_PREEMPT_RCU
and uses PREEMPT_RCU config option in its place.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-10-29 10:20:05 -07:00
Clark Williams
21871d7eff rcu: Unify boost and kthread priorities
Rename CONFIG_RCU_BOOST_PRIO to CONFIG_RCU_KTHREAD_PRIO and use this
value for both the per-CPU kthreads (rcuc/N) and the rcu boosting
threads (rcub/n).

Also, create the module_parameter rcutree.kthread_prio to be used on
the kernel command line at boot to set a new value (rcutree.kthread_prio=N).

Signed-off-by: Clark Williams <clark.williams@gmail.com>
[ paulmck: Ported to rcu/dev, applied Paul Bolle and Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-10-29 10:19:41 -07:00
Jens Axboe
e167dfb53c blk-mq: add BLK_MQ_F_DEFER_ISSUE support flag
Drivers can now tell blk-mq if they take advantage of the deferred
issue through 'last' or not. If they do, don't do queue-direct
for sync IO. This is a preparation patch for the nvme conversion.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-29 11:18:26 -06:00
Jens Axboe
74c450521d blk-mq: add a 'list' parameter to ->queue_rq()
Since we have the notion of a 'last' request in a chain, we can use
this to have the hardware optimize the issuing of requests. Add
a list_head parameter to queue_rq that the driver can use to
temporarily store hw commands for issue when 'last' is true. If we
are doing a chain of requests, pass in a NULL list for the first
request to force issue of that immediately, then batch the remainder
for deferred issue until the last request has been sent.

Instead of adding yet another argument to the hot ->queue_rq path,
encapsulate the passed arguments in a blk_mq_queue_data structure.
This is passed as a constant, and has been tested as faster than
passing 4 (or even 3) args through ->queue_rq. Update drivers for
the new ->queue_rq() prototype. There are no functional changes
in this patch for drivers - if they don't use the passed in list,
then they will just queue requests individually like before.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-29 11:14:52 -06:00
Boris BREZILLON
5935946c6a mtd: nand: add sunxi NFC dt bindings doc
Add the sunxi NAND Flash Controller dt bindings documentation.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29 10:08:01 -07:00
Boris BREZILLON
1fef62c142 mtd: nand: add sunxi NAND flash controller support
Add support for the sunxi NAND Flash Controller (NFC).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Brian: tweaked to fix ecc->steps issue]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29 10:08:00 -07:00
Oleg Nesterov
392809b258 signal: Document the RCU protection of ->sighand
__cleanup_sighand() frees sighand without RCU grace period. This is
correct but this looks "obviously buggy" and constantly confuses the
readers, add the comments to explain how this works.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-10-29 10:07:18 -07:00
Paul E. McKenney
eca1a08986 signal: Exit RCU read-side critical section on each pass through loop
The kill_pid_info() can potentially loop indefinitely if tasks are created
and deleted sufficiently quickly, and if this happens, this function
will remain in a single RCU read-side critical section indefinitely.
This commit therefore exits the RCU read-side critical section on each
pass through the loop.  Because a race must happen to retry the loop,
this should have no performance impact in the common case.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-10-29 10:07:04 -07:00
Liam Girdwood
d96c53a193 ASoC: Intel: Add generic support for DSP wake, sleep and stall
Add generic functions to support DSP sleep, wake and stall.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 16:56:55 +00:00
kbuild test robot
137f6d541a ASoC: Intel: dw_pdata can be static
sound/soc/intel/sst-firmware.c:172:29: sparse: symbol 'dw_pdata' was not declared. Should it be static?

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 16:56:55 +00:00
Varka Bhadram
ef0bbac33d MAINTAINERS: add cc2520 driver maintainer
This patch adds maintainer for cc2520 radio driver

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 17:25:18 +01:00
Greg Kroah-Hartman
9c19db5b11 USB-serial fixes for v3.18-rc3
These updates remove two allocations of unused buffers from kobil_sct
 and add some new device ids.
 
 Signed-off-by: Johan Hovold <johan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUUK1CAAoJEEEN5E/e4bSVVusQAM3DJ2pS2YvygoZ8+O9AUkIQ
 beDoRV5mAV1qEnEq9+reO90qKC4KvVwJbsi1b+m4tc488mjNCOTgty9YweWatvte
 3BrAl7r5Y3vy26waFSjLoixS+R/SesTwnOu7jiRDIv3Cx4ppSuVjBJ6xWrFsEJyy
 mOMGY34nt51SSPl4MDUBqdAVpnqy2epwG186i6/092jDBo3bbhtO2sh4qfFSAn2H
 ypKjWNnG0BXx/gwrVFkpDJuiO1CY68orvSKzTIpWqipn3lTGSU7gMuz0W3NeLXkL
 1LGHhtA8C+k/7PeYT5pRUuOfbr3GbLPsTiy3yP05DbeS1whtJ4gXzlQuNvE0beuY
 RV/5auz9zXrE62p1uR3uY14OamUi300NKriOYTLDSKrp0SzTu+5LEwM6DHfbxxiN
 Cr8Bd6XW/UegHPnWKUvMWViVyUpSjBCy3j7aSmrXmv9HRnaP+shXvIZjuRcVUfwE
 6UskyFd/4tPeYbQo5FASh8vrAmoYKqS/0pNZGi1oM1+rrxIIqveNBkfKebwH5q1Z
 hCMfFysEohlf0sbSgJWjGEdqfmfDOHlE36ovY83ytGqBBVYh7f5pW1jMZSaTqomB
 GRAcuJNs61BVaigRiQFmluEFTETrUrZy1Z5AuAfUXRJPsE+Jz/N5E5FXT8rVkjc4
 JfeP/L3uVME6GYww7Qsj
 =PSiW
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v3.18-rc3

These updates remove two allocations of unused buffers from kobil_sct
and add some new device ids.

Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-29 09:24:42 -07:00
Dan Carpenter
072c44bf24 drm/radeon: remove some buggy dead code
The calculation of "num_shader_engines" has a precedence bug because
the right shift happens before the mask, but this variable is never used
so we can just delete it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-10-29 12:24:15 -04:00
Richard Zhu
a2fa6f64c2 PCI: imx6: Wait for clocks to stabilize after ref_en
For boards without a reset GPIO we skip the delay between enabling the
pcie_ref_clk and touching the RC registers for configuration.  This hangs
the system if there isn't a proper delay to ensure the clocks are settled
in the DW PCIe core.

Also iMX6Q always needs an additional 10us delay to make sure the reset is
propagated through the core, as we don't have an explicitly controlled
reset input on this SoC.

This fixes a problem with 3fce0e882f ("PCI: imx6: Delay enabling
reference clock for SS until it stabilizes"): the kernel doesn't boot on
systems that don't pass the PCI GPIO reset in the DTB.  This regression
affects mx6 nitrogen boards.

[bhelgaas: add regression info in changelog]
Fixes: 3fce0e882f ("PCI: imx6: Delay enabling reference clock for SS until it stabilizes")
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Richard Zhu <richard.zhu@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
2014-10-29 10:11:54 -06:00
Lv Zheng
7914900110 ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer.
It is reported that Samsung laptops that need to poll events are broken by
the following commit:
 Commit 3afcf2ece4
 Subject: ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set

The behaviors of the 2 vendor firmwares are conflict:
 1. Acer: OSPM shouldn't issue QR_EC unless SCI_EVT is set, firmware
         automatically sets SCI_EVT as long as there is event queued up.
 2. Samsung: OSPM should issue QR_EC whatever SCI_EVT is set, firmware
            returns 0 when there is no event queued up.

This patch is a quick fix to distinguish the behaviors to make Acer
behavior only effective for Acer EC firmware so that the breakages on
Samsung EC firmware can be avoided.

Fixes: 3afcf2ece4 (ACPI / EC: Add support to disallow QR_EC to be issued ...)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Reported-and-tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
[ rjw : Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 16:52:35 +01:00
Jukka Rissanen
5940c3e4f3 mac80211-hwsim: Rename CREATE and DESTROY radio to NEW and DEL radio
Using the name HWSIM_CMD_NEW_RADIO and HWSIM_CMD_DEL_RADIO is more
fitting on how other pieces of the wireless system work.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 16:48:44 +01:00
Lv Zheng
df9ff91801 Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"
It is reported that the following commit breaks Samsung hardware:
 Commit: 558e4736f2.
 Subject: ACPI / EC: Add support to disallow QR_EC to be issued before
          completing previous QR_EC

Which means the Samsung behavior conflicts with the Acer behavior.

1. Samsung may behave like:
   [ +event 1 ] SCI_EVT set
   [ +event 2 ] SCI_EVT set
                              write QR_EC
                              read event
   [ -event 1 ] SCI_EVT clear
   Without the above commit, Samsung can work:
   [ +event 1 ] SCI_EVT set
   [ +event 2 ] SCI_EVT set
                              write QR_EC
                              CAN prepare next QR_EC as SCI_EVT=1
                              read event
   [ -event 1 ] SCI_EVT clear
                              write QR_EC
                              read event
   [ -event 2 ] SCI_EVT clear
   With the above commit, Samsung cannot work:
   [ +event 1 ] SCI_EVT set
   [ +event 2 ] SCI_EVT set
                              write QR_EC
                              read event
   [ -event 1 ] SCI_EVT clear
                              CANNOT prepare next QR_EC as SCI_EVT=0
2. Acer may behave like:
   [ +event 1 ] SCI_EVT set
   [ +event 2 ]
                              write QR_EC
                              read event
   [ -event 1 ] SCI_EVT clear
   [ +event 2 ] SCI_EVT set
   Without the above commit, Acer cannot work when there is only 1 event:
   [ +event 1 ] SCI_EVT set
                              write QR_EC
                              can prepared next QR_EC as SCI_EVT=1
                              read event
   [ -event 1 ] SCI_EVT clear
                              CANNOT write QR_EC as SCI_EVT=0
   With the above commit, Acer can work:
   [ +event 1 ] SCI_EVT set
   [ +event 2 ]
                              write QR_EC
                              read event
   [ -event 1 ] SCI_EVT set
                              can prepare next QR_EC because SCI_EVT=0
                              CAN write QR_EC as SCI_EVT=1

Since Acer can also work with only the following commit applied:
 Commit: 3afcf2ece4
 Subject: ACPI / EC: Add support to disallow QR_EC to be issued when
          SCI_EVT isn't set
commit 558e4736f2 can be reverted.

Fixes: 558e4736f2 (ACPI / EC: Add support to disallow QR_EC to be issued ...)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Reported-and-tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 16:48:33 +01:00
Luciano Coelho
ff1e417c7c mac80211: schedule the actual switch of the station before CSA count 0
Due to the time it takes to process the beacon that started the CSA
process, we may be late for the switch if we try to reach exactly
beacon 0.  To avoid that, use count - 1 when calculating the switch time.

Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 16:37:54 +01:00
Luciano Coelho
84469a45a1 mac80211: use secondary channel offset IE also beacons during CSA
If we are switching from an HT40+ to an HT40- channel (or vice-versa),
we need the secondary channel offset IE to specify what is the
post-CSA offset to be used.  This applies both to beacons and to probe
responses.

In ieee80211_parse_ch_switch_ie() we were ignoring this IE from
beacons and using the *current* HT information IE instead.  This was
causing us to use the same offset as before the switch.

Fix that by using the secondary channel offset IE also for beacons and
don't ever use the pre-switch offset.  Additionally, remove the
"beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not
needed anymore.

Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 16:37:45 +01:00
Dan Carpenter
eb63192bb8 SUNRPC: off by one in BUG_ON()
The m->pool_to[] array has "maxpools" number of elements.  It's
allocated in svc_pool_map_alloc_arrays() which we called earlier in the
function.  This test should be >= instead of >.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-10-29 11:37:42 -04:00
Felix Fietkau
10b6848786 mac80211: flush keys for AP mode on ieee80211_do_stop
Userspace can add keys to an AP mode interface before start_ap has been
called. If there have been no calls to start_ap/stop_ap in the mean
time, the keys will still be around when the interface is brought down.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[adjust comments, fix AP_VLAN case]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 16:33:37 +01:00
Junjie Mao
805dbe17d1 mac80211_hwsim: release driver when ieee80211_register_hw fails
The driver is not released when ieee80211_register_hw fails in
mac80211_hwsim_create_radio, leading to the access to the unregistered (and
possibly freed) device in platform_driver_unregister:

[    0.447547] mac80211_hwsim: ieee80211_register_hw failed (-2)
[    0.448292] ------------[ cut here ]------------
[    0.448854] WARNING: CPU: 0 PID: 1 at ../include/linux/kref.h:47 kobject_get+0x33/0x50()
[    0.449839] CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00001-gdd46990-dirty #2
[    0.450813] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.451512]  00000000 00000000 78025e38 7967c6c6 78025e68 7905e09b 7988b480 00000000
[    0.452579]  00000001 79887d62 0000002f 79170bb3 79170bb3 78397008 79ac9d74 00000001
[    0.453614]  78025e78 7905e15d 00000009 00000000 78025e84 79170bb3 78397000 78025e8c
[    0.454632] Call Trace:
[    0.454921]  [<7967c6c6>] dump_stack+0x16/0x18
[    0.455453]  [<7905e09b>] warn_slowpath_common+0x6b/0x90
[    0.456067]  [<79170bb3>] ? kobject_get+0x33/0x50
[    0.456612]  [<79170bb3>] ? kobject_get+0x33/0x50
[    0.457155]  [<7905e15d>] warn_slowpath_null+0x1d/0x20
[    0.457748]  [<79170bb3>] kobject_get+0x33/0x50
[    0.458274]  [<7925824f>] get_device+0xf/0x20
[    0.458779]  [<7925b5cd>] driver_detach+0x3d/0xa0
[    0.459331]  [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[    0.459927]  [<7925bf80>] ? class_unregister+0x40/0x80
[    0.460660]  [<7925bad7>] driver_unregister+0x47/0x50
[    0.461248]  [<7925c033>] ? class_destroy+0x13/0x20
[    0.461824]  [<7925d07b>] platform_driver_unregister+0xb/0x10
[    0.462507]  [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[    0.463161]  [<79b30c58>] do_one_initcall+0x106/0x1a9
[    0.463758]  [<79b517b8>] ? if_spi_init_module+0xac/0xac
[    0.464393]  [<79b517b8>] ? if_spi_init_module+0xac/0xac
[    0.465001]  [<79071935>] ? parse_args+0x2f5/0x480
[    0.465569]  [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[    0.466345]  [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[    0.466972]  [<79b304d6>] ? do_early_param+0x7a/0x7a
[    0.467546]  [<79677b1b>] kernel_init+0xb/0xe0
[    0.468072]  [<79075f42>] ? schedule_tail+0x12/0x40
[    0.468658]  [<79686580>] ret_from_kernel_thread+0x20/0x30
[    0.469303]  [<79677b10>] ? rest_init+0xc0/0xc0
[    0.469829] ---[ end trace ad8ac403ff8aef5c ]---
[    0.470509] ------------[ cut here ]------------
[    0.471047] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3161 __lock_acquire.isra.22+0x7aa/0xb00()
[    0.472163] DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS)
[    0.472774] CPU: 0 PID: 1 Comm: swapper Tainted: G        W      3.17.0-00001-gdd46990-dirty #2
[    0.473815] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.474492]  78025de0 78025de0 78025da0 7967c6c6 78025dd0 7905e09b 79888931 78025dfc
[    0.475515]  00000001 79888a93 00000c59 7907f33a 7907f33a 78028000 fffe9d09 00000000
[    0.476519]  78025de8 7905e10e 00000009 78025de0 79888931 78025dfc 78025e24 7907f33a
[    0.477523] Call Trace:
[    0.477821]  [<7967c6c6>] dump_stack+0x16/0x18
[    0.478352]  [<7905e09b>] warn_slowpath_common+0x6b/0x90
[    0.478976]  [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00
[    0.479658]  [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00
[    0.480417]  [<7905e10e>] warn_slowpath_fmt+0x2e/0x30
[    0.480479]  [<7907f33a>] __lock_acquire.isra.22+0x7aa/0xb00
[    0.480479]  [<79078aa5>] ? sched_clock_cpu+0xb5/0xf0
[    0.480479]  [<7907fd06>] lock_acquire+0x56/0x70
[    0.480479]  [<7925b5e8>] ? driver_detach+0x58/0xa0
[    0.480479]  [<79682d11>] mutex_lock_nested+0x61/0x2a0
[    0.480479]  [<7925b5e8>] ? driver_detach+0x58/0xa0
[    0.480479]  [<7925b5e8>] ? driver_detach+0x58/0xa0
[    0.480479]  [<7925b5e8>] driver_detach+0x58/0xa0
[    0.480479]  [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[    0.480479]  [<7925bf80>] ? class_unregister+0x40/0x80
[    0.480479]  [<7925bad7>] driver_unregister+0x47/0x50
[    0.480479]  [<7925c033>] ? class_destroy+0x13/0x20
[    0.480479]  [<7925d07b>] platform_driver_unregister+0xb/0x10
[    0.480479]  [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[    0.480479]  [<79b30c58>] do_one_initcall+0x106/0x1a9
[    0.480479]  [<79b517b8>] ? if_spi_init_module+0xac/0xac
[    0.480479]  [<79b517b8>] ? if_spi_init_module+0xac/0xac
[    0.480479]  [<79071935>] ? parse_args+0x2f5/0x480
[    0.480479]  [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[    0.480479]  [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[    0.480479]  [<79b304d6>] ? do_early_param+0x7a/0x7a
[    0.480479]  [<79677b1b>] kernel_init+0xb/0xe0
[    0.480479]  [<79075f42>] ? schedule_tail+0x12/0x40
[    0.480479]  [<79686580>] ret_from_kernel_thread+0x20/0x30
[    0.480479]  [<79677b10>] ? rest_init+0xc0/0xc0
[    0.480479] ---[ end trace ad8ac403ff8aef5d ]---
[    0.495478] BUG: unable to handle kernel paging request at 00200200
[    0.496257] IP: [<79682de5>] mutex_lock_nested+0x135/0x2a0
[    0.496923] *pde = 00000000
[    0.497290] Oops: 0002 [#1]
[    0.497653] CPU: 0 PID: 1 Comm: swapper Tainted: G        W      3.17.0-00001-gdd46990-dirty #2
[    0.498659] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[    0.499321] task: 78028000 ti: 78024000 task.ti: 78024000
[    0.499955] EIP: 0060:[<79682de5>] EFLAGS: 00010097 CPU: 0
[    0.500620] EIP is at mutex_lock_nested+0x135/0x2a0
[    0.501145] EAX: 00200200 EBX: 78397434 ECX: 78397460 EDX: 78025e70
[    0.501816] ESI: 00000246 EDI: 78028000 EBP: 78025e8c ESP: 78025e54
[    0.502497]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[    0.503076] CR0: 8005003b CR2: 00200200 CR3: 01b9d000 CR4: 00000690
[    0.503773] Stack:
[    0.503998]  00000000 00000001 00000000 7925b5e8 78397460 7925b5e8 78397474 78397460
[    0.504944]  00200200 11111111 78025e70 78397000 79ac9d74 00000001 78025ea0 7925b5e8
[    0.505451]  79ac9d74 fffffffe 00000001 78025ebc 7925a3ff 7a251398 78025ec8 7925bf80
[    0.505451] Call Trace:
[    0.505451]  [<7925b5e8>] ? driver_detach+0x58/0xa0
[    0.505451]  [<7925b5e8>] ? driver_detach+0x58/0xa0
[    0.505451]  [<7925b5e8>] driver_detach+0x58/0xa0
[    0.505451]  [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[    0.505451]  [<7925bf80>] ? class_unregister+0x40/0x80
[    0.505451]  [<7925bad7>] driver_unregister+0x47/0x50
[    0.505451]  [<7925c033>] ? class_destroy+0x13/0x20
[    0.505451]  [<7925d07b>] platform_driver_unregister+0xb/0x10
[    0.505451]  [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[    0.505451]  [<79b30c58>] do_one_initcall+0x106/0x1a9
[    0.505451]  [<79b517b8>] ? if_spi_init_module+0xac/0xac
[    0.505451]  [<79b517b8>] ? if_spi_init_module+0xac/0xac
[    0.505451]  [<79071935>] ? parse_args+0x2f5/0x480
[    0.505451]  [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[    0.505451]  [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[    0.505451]  [<79b304d6>] ? do_early_param+0x7a/0x7a
[    0.505451]  [<79677b1b>] kernel_init+0xb/0xe0
[    0.505451]  [<79075f42>] ? schedule_tail+0x12/0x40
[    0.505451]  [<79686580>] ret_from_kernel_thread+0x20/0x30
[    0.505451]  [<79677b10>] ? rest_init+0xc0/0xc0
[    0.505451] Code: 89 d8 e8 cf 9b 9f ff 8b 4f 04 8d 55 e4 89 d8 e8 72 9d 9f ff 8d 43 2c 89 c1 89 45 d8 8b 43 30 8d 55 e4 89 53 30 89 4d e4 89 45 e8 <89> 10 8b 55 dc 8b 45 e0 89 7d ec e8 db af 9f ff eb 11 90 31 c0
[    0.505451] EIP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 SS:ESP 0068:78025e54
[    0.505451] CR2: 0000000000200200
[    0.505451] ---[ end trace ad8ac403ff8aef5e ]---
[    0.505451] Kernel panic - not syncing: Fatal exception

Fixes: 9ea927748c ("mac80211_hwsim: Register and bind to driver")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Junjie Mao <eternal.n08@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29 16:31:06 +01:00
Jukka Rissanen
9cfd5a23a4 Bluetooth: Wrong style spin lock used
Use spin_lock_bh() as the code is called from softirq in networking subsystem.
This is needed to prevent deadlocks when 6lowpan link is in use.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29 16:20:40 +01:00
Christoph Lameter
56e4dea81a percpu: Convert remaining __get_cpu_var uses in 3.18-rcX
During the 3.18 merge period additional __get_cpu_var uses were
added. The patch converts these to this_cpu_ptr().

Signed-off-by: Christoph Lameter <cl@linux.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-10-29 11:18:18 -04:00
Takashi Iwai
3b70bdba2f ALSA: hda - Add workaround for CMI8888 snoop behavior
CMI8888 shows the stuttering playback when the snooping is disabled
on the audio buffer.  Meanwhile, we've got reports that CORB/RIRB
doesn't work in the snooped mode.  So, as a compromise, disable the
snoop only for CORB/RIRB and enable the snoop for the stream buffers.

The resultant patch became a bit ugly, unfortunately, but we still can
live with it.

Reported-and-tested-by: Geoffrey McRae <geoff@spacevs.com>
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29 16:16:29 +01:00
Sudip Mukherjee
df57de172a ALSA: hdspm: remove unused variable
removed the unused variables. These variables were only being
assigned some value, but the values were never being used.

it has been build tested after removing the variables.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29 16:12:32 +01:00
Takashi Iwai
95a962c36f ALSA: hda - More kerneldoc comments
Put more kerneldoc comments to the exported functions.
Still the generic parser code and the HD-audio controller code aren't
covered yet, though.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29 16:03:58 +01:00
Dan Carpenter
9f295664e2 percpu: off by one in BUG_ON()
The unit_map[] array has "nr_cpu_ids" number of elements.  It's
allocated a few lines earlier in the function.  So this test should be
>= instead of >.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-10-29 10:34:34 -04:00
Heena Sirwani
dbe7aa622d timekeeping: Provide y2038 safe accessor to the seconds portion of CLOCK_REALTIME
ktime_get_real_seconds() is the replacement function for get_seconds()
returning the seconds portion of CLOCK_REALTIME in a time64_t. For
64bit the function is equivivalent to get_seconds(), but for 32bit it
protects the readout with the timekeeper sequence count. This is
required because 32-bit machines cannot access 64-bit tk->xtime_sec
variable atomically.

[tglx: Massaged changelog and added docbook comment ]

Signed-off-by: Heena Sirwani <heenasirwani@gmail.com>
Reviewed-by: Arnd Bergman <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: opw-kernel@googlegroups.com
Link: http://lkml.kernel.org/r/7adcfaa8962b8ad58785d9a2456c3f77d93c0ffb.1414578445.git.heenasirwani@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-29 15:15:40 +01:00
Heena Sirwani
9e3680b175 timekeeping: Provide fast accessor to the seconds part of CLOCK_MONOTONIC
This is the counterpart to get_seconds() based on CLOCK_MONOTONIC. The
use case for this interface are kernel internal coarse grained
timestamps which do neither require the nanoseconds fraction of
current time nor the CLOCK_REALTIME properties. Such timestamps can
currently only retrieved by calling ktime_get_ts64() and using the
tv_sec field of the returned timespec64. That's inefficient as it
involves the read of the clocksource, math operations and must be
protected by the timekeeper sequence counter.

To avoid the sequence counter protection we restrict the return value
to unsigned 32bit on 32bit machines. This covers ~136 years of uptime
and therefor an overflow is not expected to hit anytime soon.

To avoid math in the function we calculate the current seconds portion
of CLOCK_MONOTONIC when the timekeeper gets updated in
tk_update_ktime_data() similar to the CLOCK_REALTIME counterpart
xtime_sec.

[ tglx: Massaged changelog, simplified and commented the update
  	function, added docbook comment ]

Signed-off-by: Heena Sirwani <heenasirwani@gmail.com>
Reviewed-by: Arnd Bergman <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: opw-kernel@googlegroups.com
Link: http://lkml.kernel.org/r/da0b63f4bdf3478909f92becb35861197da3a905.1414578445.git.heenasirwani@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-29 15:15:40 +01:00
Takashi Iwai
a11e9b1686 ALSA: hda - Correct kerneldoc comments
Complete the missing parameters and fix anything wrong there.
Just comment changes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29 15:06:54 +01:00
Hans Duedal
6354b7e25b HID: roccat: Fix code style issues
Missing whitespace, semi-colon after macro, and a duplicated out of
memory message.

Signed-off-by: Hans Duedal <hans.duedal@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:56:30 +01:00
James Hartley
be278e980d clocksource: Fix 'clcoksource' typo in comment
Simple typo in a comment, so fix it.

Signed-off-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:48:34 +01:00
Ian Campbell
52b6a8f7b3 arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: trivial@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:47:59 +01:00
Daniel Thompson
5887010040 gpio: msm-v1: make boolean argument more obvious
irq_set_irq_wake() treats its second argument as a boolean. It is much
easier to read code when constant booleans are either 0 or 1!

This particular line of code distracted me somewhat when I was doing a bit of
work in a code browser since it (spuriously) got me worried that I had
misunderstood how irq_set_irq_wake() worked.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
[jkosina@suse.cz: alter subject to be more descriptive]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:46:21 +01:00
Roman Mindalev
8b648f13b4 usb: Fix typo in usb-serial-simple.c
Signed-off-by: Roman Mindalev <r000n@r000n.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:43:21 +01:00
Paul Bolle
2386dc4fb0 PCI: Fix comment typo 'COMFIG_PM_OPS'
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:42:51 +01:00
Paul Bolle
b823982cd7 powerpc: Fix comment typo 'CONIFG_8xx'
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:42:08 +01:00
Paul Bolle
c2522dcdcb powerpc: Fix comment typos 'CONFiG_ALTIVEC'
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:41:49 +01:00
Geert Uytterhoeven
994bef1094 clk: st: Spelling s/stucture/structure/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:41:02 +01:00
Geert Uytterhoeven
4e21051945 isci: Spelling s/stucture/structure/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: James E.J. Bottomley <JBottomley@parallels.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:40:35 +01:00
Geert Uytterhoeven
b8bcf32af9 usb: gadget: zero: Spelling s/infrastucture/infrastructure/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:38:13 +01:00
Masanari Iida
fe4e437229 treewide: Fix company name in module descriptions
This patch fix company name's spelling typo in module descriptions
and a Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Chris Snook <chris.snook@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29 14:36:36 +01:00
Adrian Hunter
a293829df7 perf session: Add perf_session__deliver_synth_event()
Add a function to deliver synthesized events from within a session.

Intel PT decoding works by synthesizing events (primarily branch events)
that can then be consumed by existing tools.  This function will be used
to deliver those events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414417770-18602-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-29 11:36:15 -02:00