Commit graph

505,617 commits

Author SHA1 Message Date
Eliad Peller
84fd7608a0 iwlwifi: mvm: add use_ps-poll debugfs power option
By default, when uapsd is not used, the ucode uses
null data packet to exit power-save and get then
pending frames.

However, some tests require the explicit usage of ps-poll.
Allow setting use_ps_poll power option (through debugfs)
to configure the ucode to use ps-poll instead.

The ucode configuration is done by setting the advanced-pm
flag while setting all the ACs to non-upasd mode.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-03 22:33:12 +03:00
Emmanuel Grumbach
697162a13d iwlwifi: mvm: use dynamic SMPS for P2P Client
This allows to force the GO to use protection and enhances
the reliability of the link.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-03 22:33:11 +03:00
Emmanuel Grumbach
7ceb98a313 iwlwifi: mvm: reduce the AMPDU size in low latency mode
This allows to leave a frame in the Tx Fifo which allows
the firmware to try to enter burst mode.
The end result of this is a better latency since the
firmware utilises the TxOP better.

Also limit the AMPDU size to the limit set in the ADDBA
response. This doesn't change much since the AMPDU size
was limited by the configuration of the hardware scheduler,
but here we add a software limit by the mean of the link
quality command.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-03 22:33:10 +03:00
Matti Gottlieb
7280d1f0bd iwlwifi: mvm: Add set NIC temperature debug option
Add ability to set the NIC's temperature and ignore the actual temperature
that the FW supplies.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-03 22:33:06 +03:00
Mauro Carvalho Chehab
a7459a9d3a [media] marvel-ccic: don't initialize static vars with 0
alloc_bufs_at_read is static. No need to initialize with
zero, as the Kernel will cleanup the data memory already.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 16:12:33 -03:00
Tero Kristo
067bb1741c clk: prevent erronous parsing of children during rate change
In some cases, clocks can switch their parent with clk_set_rate, for
example clk_mux can do this in some cases. Current implementation of
clk_change_rate uses un-safe list iteration on the clock children, which
will cause wrong clocks to be parsed in case any of the clock children
change their parents during the change rate operation. Fixed by using
the safe list iterator instead.

The problem was detected due to some divide by zero errors generated
by clock init on dra7-evm board, see discussion under
http://article.gmane.org/gmane.linux.ports.arm.kernel/349180 for details.

Fixes: 71472c0c06 ("clk: add support for clock reparent on set_rate")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-03 12:09:14 -07:00
Tobias Klauser
3b7f101662 PCI: Remove unnecessary variable in pci_add_dynid()
The variable "retval" in pci_add_dynid() is only used to store the return
value of driver_attach() and is then directly returned.  Remove the
variable and directly pass on driver_attach()'s return value.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-03 12:42:33 -06:00
Jingoo Han
a2cea9831e spi: txx9: Fix checkpatch issue
Fix the following checkpatch warnings.

  Missing a blank line after declarations.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:30:27 +01:00
Jingoo Han
327f5386d5 spi: tegra20-sflash: Fix checkpatch issue
Fix the following checkpatch warnings.

  WARNING: macros should not use a trailing semicolon
  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:30:27 +01:00
Jingoo Han
c19c8e7581 spi: tegra114: Fix checkpatch issue
Fix the following checkpatch warnings.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:30:26 +01:00
Jingoo Han
b8434048dd spi: orion: Fix checkpatch issue
Fix the following checkpatch warnings.

  WARNING: else is not generally useful after a break or return
  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:30:26 +01:00
Jingoo Han
fadcace703 spi: dw: Fix checkpatch issue
Fix the following checkpatch warnings.

  WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required
  WARNING: min() should probably be min_t(u32, rx_left, dw_readw(dws, DW_SPI_RXFLR))
  WARNING: else is not generally useful after a break or return
  WARNING: Missing a blank line after declarations
  WARNING: void function return statements are not generally useful

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:30:26 +01:00
Jingoo Han
859c3377cc spi: davinci: Fix checkpatch issue
Fix the following checkpatch warnings.

  WARNING: Missing a blank line after declarations
  WARNING: quoted string split across lines

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:30:25 +01:00
Johan Hovold
3096691011 USB: zte_ev: fix removed PIDs
Add back some PIDs that were mistakingly remove when reverting commit
73228a0538 ("USB: option,zte_ev: move most ZTE CDMA devices to
zte_ev"), which apparently did more than its commit message claimed in
that it not only moved some PIDs from option to zte_ev but also added
some new ones.

Fixes: 63a901c06e ("Revert "USB: option,zte_ev: move most ZTE CDMA
devices to zte_ev"")

Reported-by: Lei Liu <lei35151@163.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-03 11:28:59 -07:00
Greg Kroah-Hartman
75dfea530e usb: fixes for v3.17-rc3
A new set of fixes which have been pending for a while. All patches
 have been randconfig build-tested and boot tested where applicable.
 
 The most important fixes are MUSB on AM335x learned how to transfer
 ZLPs, and net2280 got a fix for reset IRQ handling.
 
 Signed-of-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUByUCAAoJEIaOsuA1yqRESVUQALJesmh+LwyWEQDplUAm4RlC
 rB9f9rw2WAiThwwMcMX4PH19uIjOeo3ip2hfsclZTvPyjshLICoRdjL3w8bsne+h
 bGlRQowcX3exnja8jIPDATb+j4tATL997nitRsCwhbuS3+xnSW3rpS5N5/yLnedP
 c0/VSf70oVNOxe28C3pHUy3694nDw84uMWT+hGhg6HRyHbjXFWaBsr4ggWCSU8IH
 oG+IPx6XfzYEBtuAcRCQPwfdOtbaI1htIBot9coONvBX75hQNfqEfpfRccN869Qo
 xjskMgJGAIkukJhmmZy8h3On2SrOrE5n61/SDD3IC8JxlrwSff6LZFf3pB5qSXTE
 nyxkJhl9Pf0QpKzSnJTGc+3DiKv882OwQziNx2aKzbMJ96QFib5kuBSvCcXubXMT
 EPmAYr3twGwVwuKOY2o30UYVZJ4X5WOnt9AgES0DFoxzqUjEG7QeMWJDTUoSaOJ8
 kr6N7ko5cu3xrh27mv7ch31LwHiOA6MrQAXjfpnJRIvHac0wkq8Kf1DxAHUavgqL
 fs1ZsJtEMXZyok4PJsCF43nbl1tJ22SkTvZW/vN9wb9g3toGFeXMXncdK6jH63OB
 4+aUVsWeP6fj33P5SHIDCethwi9o6tqdb5d0A4tlYMRNENKIFrRf6Cpsx7C8snck
 ntDsSsZpNFRpSlGYH8jE
 =vPu0
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v3.17-rc3

A new set of fixes which have been pending for a while. All patches
have been randconfig build-tested and boot tested where applicable.

The most important fixes are MUSB on AM335x learned how to transfer
ZLPs, and net2280 got a fix for reset IRQ handling.

Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-09-03 11:27:28 -07:00
Lars-Peter Clausen
e02c716d2e ASoC: wm8995: Remove unnecessary suspend/resume bias level changes
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:26:26 +01:00
Lars-Peter Clausen
a7edeba4cb ASoC: wm8804: Remove unnecessary suspend/resume bias level changes
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:26:26 +01:00
Lars-Peter Clausen
7d1a99da08 ASoC: tlv320aic3x: Remove unnecessary suspend/resume bias level changes
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:26:26 +01:00
Lars-Peter Clausen
8e6fe35eab ASoC: lm49453: Remove unnecessary suspend/resume bias level changes
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:26:26 +01:00
Lars-Peter Clausen
b43cfb245f ASoC: adau1373: Remove unnecessary suspend/resume bias level changes
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.

Also drop the regcache_cache_only() calls from the suspend and resume
handlers. There shouldn't be any IO happening after suspend and before
resume.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 19:26:25 +01:00
Greg Kroah-Hartman
c156bf2cfc for_3.17-rc
Fix regressions to runtime PM on OMAP and other minor fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJT/wC9AAoJEA5ceFyATYLZyZ4QAJ0q0XT9hpsx5TAUcM8azeYG
 jRGm2SrkBQlxkCH8lS6PhJXGdbd8SR3H9l0ITPNed/Vwt0N5LBtBVmRWGDJNliGM
 E9RoBTBqohPlBozyORDoM8cs2RIVqj14WAhXjJUvq+6DAxw6rQ5UMnKJXiNf8Ui7
 MGh9i0/JQvKNYLVvGACzo5Jb38c0fSR7irYcAQJstI77QnnJQ6pSTdseCV64F45L
 IFvLa+4gkqfi8vFHlVH5pSa6NRmq9x+q1fkDl/e+EcJjZ67xfAFuXGlvsM8m6B7F
 YzyNNiqpGW9KvRRhOfQCWadI0olgtPZS2XXS9pRgIDDDh38V9bkyv0aQJLGQrZlz
 ChQq2jnVifTo0MK93x4s28DUjETxhUQLZ0rtENiLaNHcpiFJRZxVdZ+q5ZTRN5JA
 oaqbty6FEyWlSIv80jIe4s55RpBxWIGr0PRLNnVRl4+GWKxQOjCnnY2CLxLpz0dN
 c/6TVJwIsZDQD6A895eBdjmTCF4oLdswtwHMn4P3g1vxNGjP0UwsJ3kGb59Zx7GO
 dopEtLCutMC8tcLUl2YJwEiPUSqAJlfeDJ7h0SRdhwE3jqsdnuwFOT2BRFlfM6qq
 P04SYd5W9r9MW9y5suUnuURddpqVYIe8wt405dSqY4+jP2pVzyjAMaBmuoVbOx4g
 Ejjp9CDLmsozs1wfiOsd
 =s/sJ
 -----END PGP SIGNATURE-----

Merge tag 'for-3.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus

Kishon writes:

for_3.17-rc

Fix regressions to runtime PM on OMAP and other minor fixes.
2014-09-03 11:26:04 -07:00
Doug Anderson
f4ee3c8446 clk: rockchip: Fix the clocks for i2c1 and i2c2
The clocks for i2c1 and i2c2 are flipped.  The clock tree matched the
Technical Reference Manual (TRM) but the TRM was wrong.  Swap them in
the clock tree.  This was determined experimentally (by Addy) and
confirmed by the Rockchip IC team.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reported-by: Addy Ke <addy.ke@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-03 11:24:50 -07:00
Sudeep Holla
3d8afe3099 arm64: use irq_set_affinity with force=false when migrating irqs
The arm64 interrupt migration code on cpu offline calls
irqchip.irq_set_affinity() with the argument force=true. Originally
this argument had no effect because it was not used by any interrupt
chip driver and there was no semantics defined.

This changed with commit 01f8fa4f01 ("genirq: Allow forcing cpu
affinity of interrupts") which made the force argument useful to route
interrupts to not yet online cpus without checking the target cpu
against the cpu online mask. The following commit ffde1de640
("irqchip: gic: Support forced affinity setting") implemented this for
the GIC interrupt controller.

As a consequence the cpu offline irq migration fails if CPU0 is
offlined, because CPU0 is still set in the affinity mask and the
validation against cpu online mask is skipped to the force argument
being true. The following first_cpu(mask) selection always selects
CPU0 as the target.

Commit 601c942176d8("arm64: use cpu_online_mask when using forced
irq_set_affinity") intended to fix the above mentioned issue but
introduced another issue where affinity can be migrated to a wrong
CPU due to unconditional copy of cpu_online_mask.

As with for arm, solve the issue by calling irq_set_affinity() with
force=false from the CPU offline irq migration code so the GIC driver
validates the affinity mask against CPU online mask and therefore
removes CPU0 from the possible target candidates. Also revert the
changes done in the commit 601c942176 as it's no longer needed.

Tested on Juno platform.

Fixes: 601c942176d8("arm64: use cpu_online_mask when using forced
	irq_set_affinity")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 3.10.x
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-09-03 19:24:38 +01:00
Dan Carpenter
aeaac098bd toshiba_acpi: fix and cleanup toshiba_kbd_bl_mode_store()
The current code just returns -EINVAL because mode can't be equal to
both 1 and 2.

Also this function is messy so I have cleaned it up:
1) Remove initializers like "int time = -1".  Initializing variables to
   garbage values turns off GCC's uninitialized variable warnings so it
   can lead to bugs.
2) Use kstrtoint() instead of sscanf().
3) Use SCI_KBD_MODE_FNZ and SCI_KBD_MODE_AUTO instead of magic numbers 1
   and 2.
4) Don't check for "mode == -1" because that can't happen.
5) Preserve the error code from toshiba_kbd_illum_status_set().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-09-03 10:45:12 -07:00
Mauro Carvalho Chehab
313ddec45c [media] dmxdev: don't use before checking file->private_data
As reported by smatch:
	drivers/media/dvb-core/dmxdev.c:1091 dvb_demux_poll() warn: variable dereferenced before check 'dmxdevfilter' (see line 1088)

This was introduced by changeset d102cac809.

We need to test before using it.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 14:38:06 -03:00
Linus Torvalds
70c8038dd6 Merge tag 'for-f2fs-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs bug fixes from Jaegeuk Kim:
 "This series includes patches to:

   - fix recovery routines
   - fix bugs related to inline_data/xattr
   - fix when casting the dentry names
   - handle EIO or ENOMEM correctly
   - fix memory leak
   - fix lock coverage"

* tag 'for-f2fs-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (28 commits)
  f2fs: reposition unlock_new_inode to prevent accessing invalid inode
  f2fs: fix wrong casting for dentry name
  f2fs: simplify by using a literal
  f2fs: truncate stale block for inline_data
  f2fs: use macro for code readability
  f2fs: introduce need_do_checkpoint for readability
  f2fs: fix incorrect calculation with total/free inode num
  f2fs: remove rename and use rename2
  f2fs: skip if inline_data was converted already
  f2fs: remove rewrite_node_page
  f2fs: avoid double lock in truncate_blocks
  f2fs: prevent checkpoint during roll-forward
  f2fs: add WARN_ON in f2fs_bug_on
  f2fs: handle EIO not to break fs consistency
  f2fs: check s_dirty under cp_mutex
  f2fs: unlock_page when node page is redirtied out
  f2fs: introduce f2fs_cp_error for readability
  f2fs: give a chance to mount again when encountering errors
  f2fs: trigger release_dirty_inode in f2fs_put_super
  f2fs: don't skip checkpoint if there is no dirty node pages
  ...
2014-09-03 10:10:28 -07:00
Linus Torvalds
5a147c9f57 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull key subsystem fixes from James Morris:
 "Fixes for the keys subsystem, one of which addresses a use-after-free
  bug"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  PEFILE: Relax the check on the length of the PKCS#7 cert
  KEYS: Fix use-after-free in assoc_array_gc()
  KEYS: Fix public_key asymmetric key subtype name
  KEYS: Increase root_maxkeys and root_maxbytes sizes
2014-09-03 10:09:40 -07:00
Noam Camus
014018e0b4 ARC: [mm] Fix compilation breakage
Structure name and variable name were erroneously interchanged

Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
[ Also removed pointless cast from "void *".  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-03 10:08:50 -07:00
Mike Turquette
7cd4375117 Merge branch 'for-v3.17-rc/ti-clk-driver' of github.com:t-kristo/linux-pm into clk-fixes 2014-09-03 10:07:14 -07:00
Robert Elliott
5676e7b6db blk-mq: cleanup after blk_mq_init_rq_map failures
In blk-mq.c blk_mq_alloc_tag_set, if:
	set->tags = kmalloc_node()
succeeds, but one of the blk_mq_init_rq_map() calls fails,
	goto out_unwind;
needs to free set->tags so the caller is not obligated
to do so.  None of the current callers (null_blk,
virtio_blk, virtio_blk, or the forthcoming scsi-mq)
do so.

set->tags needs to be set to NULL after doing so,
so other tag cleanup logic doesn't try to free
a stale pointer later.  Also set it to NULL
in blk_mq_free_tag_set.

Tested with error injection on the forthcoming
scsi-mq + hpsa combination.

Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-03 10:44:15 -06:00
Linus Torvalds
955837d8f5 arm64 fixes for -rc4
Another handful of arm64 fixes here:
 
   - A few fixes for real issues found by smatch (after Dan's talk at KS)
   - Revert the /proc/cpuinfo changes merged during the merge window.
     We've opened a can of worms here, so we need to find out where we
     stand before we change this interface.
   - Implement KSTK_ESP for compat tasks, otherwise 32-bit Android gets
     confused wondering where its [stack] has gone
   - Misc fixes (fpsimd context handling, crypto, ...)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJUBKj4AAoJEC379FI+VC/ZR7wP/jdJ+mK+lqMPg0K2vw8qiGsu
 Npq/QBG+mrIcPJZQ/njPBx7Ex7o/8YrhlA4tzuT5sk3Q+P5xgcg6VCneOp4qYmNA
 YUuNcWOx1Oufo8FxnmG8nylV9hlNKYiY83/UTlSw4ZdEH9C/CpBb3ihI5XnfJvtE
 yRg2DnkW2p4kd0Xp/Ffc9zIEhvquv5ieYEmEXlC0//N/C2AZcbgVBLDBikfxtouM
 q6htZZ/jJ4hYTgpY6pL0zl7g/Ct5S2BI07cDKYXg79Sr8GtgbGlAO5LbRb+Ll7LB
 Uo3FSN0hhcoHGq+R8QjBKQ/FINSjpywSPIhU1kJESwfyRpLwPdpWM+dy1NNf+/gY
 J1xES+jcilYhbb/jQM2E4xsSsID9KmWHEWJ4cDpaDx2DLj2eEX0vfv403ghZ7VSG
 yUfTCUFdRLf8HadVlTgsNsS9ckNYRHsxhG+hgMjfM48dkNlkwNQB3wMi8DwUFLY2
 BGNKiWbX8LK1qE1Cy81mlsl/P0WzEY8qzswbuOZ7DnN7Rhr1zMMnG5KHYcOyGNPD
 BlIKj6DUMgZE49ouExx4sFyO1chmIDgC5R+acHAmEqNS6SvWFrK9eQBjdpob5nff
 OBtusJGsSlLmoNQOrzE8funS3fyiuA4Dl/ZsTSyQbVq3IDRCZ1UrCw0+2Py7IMhZ
 cWbL9Vbsb9drJbutXrgI
 =ibHT
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull more arm64 fixes from Will Deacon:
 "Another handful of arm64 fixes here.  They address some issues found
  by running smatch on the arch code (ignoring the false positives) and
  also stop 32-bit Android from losing track of its stack.

  There's one additional irq migration fix in the pipeline, but it came
  in after I'd tagged and tested this set.

   - a few fixes for real issues found by smatch (after Dan's talk at KS)

   - revert the /proc/cpuinfo changes merged during the merge window.
     We've opened a can of worms here, so we need to find out where we
     stand before we change this interface.

   - implement KSTK_ESP for compat tasks, otherwise 32-bit Android gets
     confused wondering where its [stack] has gone

   - misc fixes (fpsimd context handling, crypto, ...)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Revert "arm64: cpuinfo: print info for all CPUs"
  arm64: fix bug for reloading FPSIMD state after cpu power off
  arm64: report correct stack pointer in KSTK_ESP for compat tasks
  arm64: Add brackets around user_stack_pointer()
  arm64: perf: don't rely on layout of pt_regs when grabbing sp or pc
  arm64: ptrace: fix compat reg getter/setter return values
  arm64: ptrace: fix compat hardware watchpoint reporting
  arm64: Remove unused variable in head.S
  arm64/crypto: remove redundant update of data
2014-09-03 08:59:45 -07:00
Joerg Roedel
61bf5ff07a Merge branch 'for-joerg/arm-smmu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes 2014-09-03 17:58:50 +02:00
Linus Torvalds
f16c15a0e0 PCI update for v3.17:
ST Microelectronics SPEAr13xx
     - Remove module option (Sachin Kamat)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUBgQ2AAoJEFmIoMA60/r8V7IP/2Tb5CXrGANsY31FCy5G2eJf
 Oe36ZBZjDWWgzdqNZXOH17J5Udi/MStuq/MKcGuK88lxEWxn0b3QMPy1ghsqIbWL
 Dh239GHdNudQV9TiSBb99jHP1LiYLVvwwbwSSJTYAT1U34uzLOHVtax5K2DKeklc
 1Qe95szTFeWhI9vu7oIhyAGEK7B9qOY2A32WRTqOlXesvvj9EL4mr9+IJiIza9Ns
 UKY3ycnvlLT3aeboCIabACqDLbPMuRmf8weARmUbUxejN16XKReBi+6lHtd38GmU
 18AaTATbGusmxSjnT4nhtU88DTXBtKagbF8eTGO1mi1ZZiTt6AHuBfNXJ3hy95si
 dsOy2CcU3DJjJGH+W1YKjDnUnZBhTQtof1UKS0o1oVzMy0ss5k8AWkZc1I8Ns/0h
 E9B6Jb9QT6W6v/v9hZYRRr9C8x0HqHqPAKCklCS+uKGO8dgEo5cShMrJ2gkPT6pz
 HJpEKAQKXR+GrZQabZOOjpWE6pBmZaaxoI45t5k316PTwqyIfYuHDbMZ2Ld2SRDq
 MuDcNqTaUsO9APl66JMhhEvBrvhXFDXPm3ukVjb4FLu90kh6BcwAvozTEz69nHfD
 6uuTXjJ7xlRJTsgK9CHuWMNoRuXi+WIzLY3ELqUK3yVhQJzuNceNBdTq6F58J46j
 +ns5JJBLUHnPsLcYb+MC
 =mEoh
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "This fixes an ARM allmodconfig build problem:

  Remove module option for ST Microelectronics SPEAr13xx"

* tag 'pci-v3.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: spear: Remove module option
2014-09-03 08:45:48 -07:00
Linus Torvalds
51fe4d3bae Merge branch 'leds-fixes-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED fix from Bryan Wu:
 "Hugh, Jiri and many other people found a kernel oops due to a LED
  change merged recently.  Now the right fix might just revert it and
  avoid the kernel oops"

* 'leds-fixes-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  Revert "leds: convert blink timer to workqueue"
2014-09-03 08:44:55 -07:00
Stephen Warren
b82daf87a8 ARM: tegra: enable Atmel touchpad in defconfig
This driver is used on Venice2 for the touchpad.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-09-03 09:11:08 -06:00
Stephen Warren
bf8f039230 ARM: tegra: add touchpad to Venice2 DT
Venice2 contains an Atmel MXT touchpad. Add an I2C node for it to DT.
The Linux driver doesn't quite work on this platform yet, but adding
the DT node causes no issues, and will allow the device to work once
the driver is fixed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-09-03 09:10:58 -06:00
Maarten Lankhorst
58b21c22c6 drm/qxl: Fix crash in eviction from qxl_release_fence_buffer_objects
This crash was already here before the conversion, but qxl never leaked
hard enough to hit this.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
2014-09-03 17:09:13 +02:00
Maarten Lankhorst
b75402c9f9 drm/qxl: fix gaping memory hole
This is how you implement a memory sieve in a driver. ;-)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
2014-09-03 17:09:12 +02:00
Maarten Lankhorst
d7e4d67136 drm/qxl: Remove release_lock stupidity
The locking of release_lock was stupid; t should have been be called with
fence_lock_irq if it was legitimately used. Unfortunately it never protected
anything except the fence implementation correctly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
2014-09-03 17:09:11 +02:00
Takashi Iwai
05244d1667 ASoC: Fixes for v3.17
A few more driver specific fixes on top of the currently pending fixes
 (which are already in your tree but not Linus').
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUByMFAAoJELSic+t+oim9YfkP/27rmG+gA43D8EuPc+QvAY+b
 fXyT6CgsacFEh867ubyVkxPHp7rtDvRFXrckPOpMEQiTUTbFkhVST6xXYlP4LZzA
 97AiJqzSkPJiAlTxWTwlf8EkRw4n82uYSqOUx8ZlJbtUqt8VeaTVshm+L5emBPq1
 Q9BvcJ233Co7OWtHr2DsDh1sn7oYBBkO+mX9Ewcn79shhNdcH52IrWfih/6MHKmJ
 UtgThDokbvTXZlX7bxsfmEHloP9TJL5Et1pYDlQmQ1CqcJYG0YrQ8PylMeFE4SV9
 Ej68ogbJqddZNWS/6wyDXBKxsl54l+OJaHPGizxruvIBlpowkpyMS1pj5Us10VCc
 mqUuqGfXQbm2B7DJr9/P9+jI5QVcBJ0z8RZ+0dCgFZKU0+A1zTue75RKH7tO/M0C
 KEPW/G3MevbXJNCU1QUVkjZnsyw22302irSxksmmuE/grUabILDqWTFzXIX/v0mk
 1fE1dOGLpztHWLdnZ5eXd2xLRF48EoZbeIj8n6rXJOA4zMbZFbkAwt8BbljU2DCN
 Pb/54HP/0+s+Ig6r4vU5J/IPGKBGUj8z2F4wbZzSbT37X05JF2BP8E6FIRPkYLbp
 hUtLXTP0mNXE0L99CzkPnVJZa4cViHUNZ7Zde7jza3s0F8T49IDS8g3codFAqFtK
 n2wJa9hB2fMKw7pgVfzv
 =gYI8
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.17

A few more driver specific fixes on top of the currently pending fixes
(which are already in your tree but not Linus').
2014-09-03 16:57:41 +02:00
Pablo Neira Ayuso
cbb8125eb4 netfilter: nfnetlink: deliver netlink errors on batch completion
We have to wait until the full batch has been processed to deliver the
netlink error messages to userspace. Otherwise, we may deliver
duplicated errors to userspace in case that we need to abort and replay
the transaction if any of the required modules needs to be autoloaded.

A simple way to reproduce this (assumming nft_meta is not loaded) with
the following test file:

 add table filter
 add chain filter test
 add chain bad test                 # intentional wrong unexistent table
 add rule filter test meta mark 0

Then, when trying to load the batch:

 # nft -f test
 test:4:1-19: Error: Could not process rule: No such file or directory
 add chain bad test
 ^^^^^^^^^^^^^^^^^^^
 test:4:1-19: Error: Could not process rule: No such file or directory
 add chain bad test
 ^^^^^^^^^^^^^^^^^^^

The error is reported twice, once when the batch is aborted due to
missing nft_meta and another when it is fully processed.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-09-03 16:56:23 +02:00
Paul Moore
a7a91a1928 selinux: fix a problem with IPv6 traffic denials in selinux_ip_postroute()
A previous commit c0828e5048 ("selinux:
process labeled IPsec TCP SYN-ACK packets properly in
selinux_ip_postroute()") mistakenly left out a 'break' from a switch
statement which caused problems with IPv6 traffic.

Thanks to Florian Westphal for reporting and debugging the issue.

Reported-by: Florian Westphal <fwestpha@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2014-09-03 10:51:59 -04:00
Takashi Iwai
d89c6c0c91 ALSA: hda - Add TLV_DB_SCALE_MUTE bit for relevant controls
The DACs on Sigmatel/IDT codecs do mute at the lowest volume level,
and in the earlier drivers, we passed TLV_DB_SCALE_MUTE bit for each
volume control element like Speaker and Headphone as well as Master.
Along with the translation to the generic parser, however, the TLV bit
was lost for the slave controls (e.g. Speaker) but set only to
Master.  In theory this should have sufficed, but apps, particularly
PA, do care the slave volume bits, so we seem to see a regression in
the volume controls.

This patch adds a flag to hda_gen_spec to specify the DAC mute
feature, and adds the TLV bit properly for all relevant volume
controls.  Also, the TLV bit for vmaster is set in hda_generic.c, so
that we can get rid of all tricks from the codec driver side.

As the similar hack is applied to Conexant 5051 stuff, we can get rid
of it as well.

BugLink: https://bugs.launchpad.net/bugs/1357928
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-03 16:39:29 +02:00
Axel Lin
67c866cfcb regulator: da9211: Fix missing config.of_node setting
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 15:37:11 +01:00
Jarkko Nikula
b8a3ee820f ASoC: max98090: Add recovery for PLL lock failure
All MAX98090 input clocks MCLK, LRCLK and BCLK must be running and stable
before powering on the codec in slave mode. Otherwise the PLL may not lock
to LRCLK causing silence in playback and capture. How often that happens is
somewhat hardware and clock configuration specific.

Now if wanting to follow strictly this clocks must be active before
powering the codec on requirement we should have a notification from DAI
driver to codec driver when clocks are activated and take codec out of
shutdown only after that. Plus take care of possible active bypass paths.

However, when PLL unlock occurs, MAX98090 asserts the PLL Unlock Flag which
can be configured as an IRQ source. This allows to workaround around the
issue by toggling the codec power shortly in case of PLL lock failure.

In order to prevent needlessly toggling codec power in case of short PLL
unlocks at the beginning of stream this patch implements delayed activation
for PLL unlock interrupt. Then workaround is run only when the PLL doesn't
lock at all.

Power toggling workaround for PLL unlock comes originally from
Liam Girdwood <liam.r.girdwood@linux.intel.com> and delayed activation from
me.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 15:27:07 +01:00
Jyri Sarha
7ed36e96fd ASoC: tlv320aic31xx: Choose PLL p divider automatically
This simplifies aic31xx_divs table. There is no more need for p_val or
separate lines for 12 and 24 MHz mclks.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 15:25:44 +01:00
Mark Brown
94fe356f4c Merge branch 'fix/tlv320aic31xx' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-tlv320aic31xx 2014-09-03 15:25:17 +01:00
Jyri Sarha
03be88ee4a ASoC: tlv320aic31xx: Fix 24bit samples with I2S format and 12MHz mclk
I2S format requires bitclock to have an exact amount of cycles in a
frame for audio to work cleanly. With dsp formats that is not so
important.

Updates aic31xx_setup_pll() to look for a line in aic31xx_divs table
that produces the best match for the bitclock and adds lines to
aic31xx_divs for 12MHz mclk and 24bit samples.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-03 15:23:56 +01:00
Thierry Reding
9ce9ec95fb usb: phy: tegra: Avoid use of sizeof(void)
The PHY configuration is stored in an opaque "config" field, but when
allocating the structure, its proper size needs to be known. In the case
of UTMI, the proper structure is tegra_utmip_config of which a local
variable already exists, so we can use that to obtain the size from.

Fixes the following warning from the sparse checker:

	drivers/usb/phy/phy-tegra-usb.c:882:17: warning: expression using sizeof(void)

Fixes: 81d5dfe6d8 (usb: phy: tegra: Read UTMIP parameters from device tree)
Cc: stable@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-03 09:16:01 -05:00
Peter Chen
36687e3056 doc: dt: mxs-phy: add compatible string for imx6sx-usbphy
Add compatible string for imx6sx-usbphy.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-03 09:16:00 -05:00