Commit graph

141,155 commits

Author SHA1 Message Date
Ben Skeggs
d5316e2512 drm/nvc0-/disp: reimplement flip completion method as fifo method
Removes need for M2MF subchannel usage on NVC0+.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-22 17:17:40 +10:00
Ben Skeggs
b08abd4e9a drm/nouveau: move fence sequence check to start of loop
I want to be able to use REF_CNT from other places in the kernel without
pushing a fence object onto the list of emitted fences.

The current code makes an assumption that every time the acked sequence is
bumped that there's at least one fence on the list that'll be signalled.

This will no longer be true in the near future.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-22 17:17:36 +10:00
Ben Skeggs
b5b2e5988b drm/nouveau: remove subchannel names from places where it doesn't matter
These are FIFO methods, it doesn't matter what subchannel is being used.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-22 17:17:30 +10:00
Ben Skeggs
accf94969f drm/nouveau/ttm: always do buffer moves on kernel channel
There was once good reasons for wanting the drm to be able to use M2MF etc
on user channels, but they're not relevant anymore.  For the general
buffer move case, we've already lost by transferring between vram/sysmem
already so the context switching overhead is minimal in comparison.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-22 17:17:26 +10:00
Andi Kleen
2815ab92ba ACPI: Do cpufreq clamping for throttling per package v2
On Intel CPUs the processor typically uses the highest frequency
set by any logical CPU. When the system overheats
Linux first forces the frequency to the lowest available one
to lower the temperature.

However this was done only per logical CPU, which means all
logical CPUs in a package would need to go through this before
the frequency is actually lowered.

Worse this delay actually prevents real throttling, because
the real throttle code only proceeds when the lowest frequency
is already reached.

So when a throttle event happens force the lowest frequency
for all CPUs in the package where it happened. The per CPU
state is now kept per package, not per logical CPU. An alternative
would be to do it per cpufreq unit, but since we want to bring
down the temperature of the complete chip it's better
to do it for all.

In principle it may even make sense to do it for all CPUs,
but I kept it on the package for now.

With this change the frequency is actually lowered, which
in terms also allows real throttling to proceed.

I also removed an unnecessary per cpu variable initialization.

v2: Fix package mapping

Cc: <stable@vger.kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 02:16:14 -04:00
Bob Moore
4acb6884b5 ACPICA: Debugger: Add missing object info to namespace dump
Many namespace node types must have an attached object. For
these node types, print a message about a missing object during
a namespace dump.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:46:04 -04:00
Bob Moore
a1acd22f7c ACPICA: Change exception code for invalid pathname in acpi_evaluate_object
Change the returned exception code from AE_BAD_PARAMETER to the
more appropriate AE_BAD_PATHNAME, when the input pathname to
evaluate object is invalid.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:45:57 -04:00
Bob Moore
4efeeecd88 ACPICA: Clarify METHOD_NAME* defines for full-pathname cases
Changed the METHOD_NAME* defines that define a full pathname to
the method to METHOD_PATHNAME* in order to make it clear that
it is not a simple 4-character ACPI name. Used for the various
sleep/wake methods.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:45:53 -04:00
Bob Moore
72a8887a35 ACPICA: Add table-driven dispatch for sleep/wake functions
Simplifies the code, especially the compile-time
ACPI_REDUCED_HARDWARE option.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:45:05 -04:00
Bob Moore
7095857657 ACPICA: Split sleep/wake functions into two files
The functions for the original/legacy sleep/wake registers are in
hwsleep.c, and the functions for the new extended FADT V5 sleep
registers are in hwesleep.c

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:45:03 -04:00
Bob Moore
f99648b1af ACPICA: Distill multiple sleep method functions to a single function
Adds acpi_hw_execute_sleep_method to handle the various sleep methods
such as _GTS, _BFS, _WAK, and _SST. Removes the specialized
functions previously used for each of these methods.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:45:00 -04:00
Bob Moore
f7b004a17c ACPICA: Add acpi_os_physical_table_override interface
This interface allows the host to override a table via a
physical address, instead of the logical address required by
acpi_os_table_override. This simplifies the host implementation.
Initial implementation by Thomas Renninger. ACPICA implementation
creates a single function for table overrides that attempts both
a logical and a physical override.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:59 -04:00
Bob Moore
ea143604c5 ACPICA: ACPI 5: Update debug output for new notify values
Add new notify values, add support for "hardware specific" notifies.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:57 -04:00
Bob Moore
653f4b538f ACPICA: Expand OSL memory read/write interfaces to 64 bits
This change expands acpi_os_read_memory and acpi_os_write_memory to a
full 64 bits. This allows 64 bit transfers via the acpi_read and
acpi_write interfaces. Note: The internal acpi_hw_read and acpi_hw_write
interfaces remain at 32 bits, because 64 bits is not needed to
access the standard ACPI registers.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:54 -04:00
Bob Moore
33620c5419 ACPICA: Support for custom ACPICA build for ACPI 5 reduced hardware
Add ACPI_REDUCED_HARDWARE flag that removes all hardware-related
code (about 10% code, 5% static data).

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:49 -04:00
Bob Moore
d08310fe0d ACPICA: Move ACPI timer prototypes to public acpixf file
These prototypes were incorrectly declared in achware.h.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:38 -04:00
Bob Moore
2feec47d4c ACPICA: ACPI 5: Support for new FADT SleepStatus, SleepControl registers
Adds sleep and wake support for systems with these registers.
One new file, hwxfsleep.c

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:34 -04:00
Bob Moore
384fe875ef ACPICA: Update _REV return value to 5
_REV returns the supported ACPI revision level, which is now 5.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:26 -04:00
Len Brown
e840dfe334 Merge branch 'stable/for-x86-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into tboot 2012-03-22 01:31:09 -04:00
Amit Daniel Kachhap
f1f0e2ac59 thermal: Fix for setting the thermal zone mode to enable/disable
Basically without this patch changing the mode of thermal zone
is not possible as wrong string size is passed to strncmp.

Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:10:18 -04:00
Dan Carpenter
03ee62f0b9 thermal: spear13xx: checking for NULL instead of IS_ERR()
thermal_zone_device_register() never returns NULL, on error it returns and
ERR_PTR().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@st.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:07:22 -04:00
Viresh Kumar
de716e32e6 thermal/spear_thermal: replace readl/writel with lighter _relaxed variants
readl/writel versions for ARM contain memory barrier instruction for
synchronizing DMA buffers.  These are not required at least on this
module.  So use lighter _relaxed variants.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:06:43 -04:00
Vincenzo Frascino
6a92c36688 thermal: add support for thermal sensor present on SPEAr13xx machines
ST's SPEAr13xx machines are based on CortexA9 ARM processors.  These
machines contain a thermal sensor for junction temperature monitoring.

This patch adds support for this thermal sensor in existing thermal
framework.

[akpm@linux-foundation.org: little code cleanup]
[akpm@linux-foundation.org: print the pointer correctly]
[viresh.kumar@st.com: thermal/spear_thermal: add compilation dependency on PLAT_SPEAR]
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:05:32 -04:00
Joe Perches
c5a01dd52d thermal_sys: convert printks to pr_<level>
Use the current logging style.

Remove PREFIX, add pr_fmt, convert the printks.  All dmesg output now
prefixed with "thermal_sys: ".

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:04:40 -04:00
Joe Perches
caca8b8035 thermal_sys: kernel style cleanups
Just a few tidies to make it more like most kernel sources.

A couple of long lines still remain.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:03:09 -04:00
Joe Perches
ec79768560 thermal_sys: remove obfuscating used-once macros
These don't add any value as they are used only once and the surrounding
code uses similar variable.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:02:31 -04:00
Joe Perches
886ee54635 thermal_sys: remove unnecessary line continuations
Line continations are not necessary in function calls or statements.
Remove them.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:01:46 -04:00
Fabio Estevam
b11de07ce5 drivers/thermal/thermal_sys.c: fix build warning
With CONFIG_NET=n:

drivers/thermal/thermal_sys.c:63: warning: 'thermal_event_seqnum' defined but not used

Move 'thermal_event_seqnum' definition inside the '#ifdef CONFIG_NET'

[akpm@linux-foundation.org: make thermal_event_seqnum local to generate_netlink_event()]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Durgadoss R <durgadoss.r@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:01:27 -04:00
Michael Chan
8ec3e70207 cnic: Fix parity error code conflict
The recently added parity error handling used an error code that was
already defined for a different error.  This could lead to bnx2x
firmware assert.  We need to fix this with new error codes that are
defined for parity error only.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-21 21:57:36 -04:00
Michael Chan
7ae5289017 tg3: Fix RSS ring refill race condition
The RSS feature in tg3 hardware has only one rx producer ring for all
RSS rings.  NAPI vector 1 is special and handles the refilling of the
rx producer ring on behalf of all RSS rings.  There is a race condition
between these RSS NAPIs and the NAPI[1].  If NAPI[1] finishes checking
for refill and then another RSS ring empties the rx producer ring
before NAPI[1] exits NAPI, the chip will be completely out of SKBs in
the rx producer ring.

We fix this by adding a flag tp->rx_refill and rely on napi_schedule()/
napi_complete() to help synchronize it to close the race condition.

Update driver version to 3.123.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-21 21:57:36 -04:00
Linus Torvalds
5375871d43 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc merge from Benjamin Herrenschmidt:
 "Here's the powerpc batch for this merge window.  It is going to be a
  bit more nasty than usual as in touching things outside of
  arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
  rid of the bugger (legacy iSeries support) which was a PITA to
  maintain and that nobody really used anymore.

  Here are some of the highlights:

   - Legacy iSeries is gone.  Thanks Stephen ! There's still some bits
     and pieces remaining if you do a grep -ir series arch/powerpc but
     they are harmless and will be removed in the next few weeks
     hopefully.

   - The 'fadump' functionality (Firmware Assisted Dump) replaces the
     previous (equivalent) "pHyp assisted dump"...  it's a rewrite of a
     mechanism to get the hypervisor to do crash dumps on pSeries, the
     new implementation hopefully being much more reliable.  Thanks
     Mahesh Salgaonkar.

   - The "EEH" code (pSeries PCI error handling & recovery) got a big
     spring cleaning, motivated by the need to be able to implement a
     new backend for it on top of some new different type of firwmare.

     The work isn't complete yet, but a good chunk of the cleanups is
     there.  Note that this adds a field to struct device_node which is
     not very nice and which Grant objects to.  I will have a patch soon
     that moves that to a powerpc private data structure (hopefully
     before rc1) and we'll improve things further later on (hopefully
     getting rid of the need for that pointer completely).  Thanks Gavin
     Shan.

   - I dug into our exception & interrupt handling code to improve the
     way we do lazy interrupt handling (and make it work properly with
     "edge" triggered interrupt sources), and while at it found & fixed
     a wagon of issues in those areas, including adding support for page
     fault retry & fatal signals on page faults.

   - Your usual random batch of small fixes & updates, including a bunch
     of new embedded boards, both Freescale and APM based ones, etc..."

I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
  powerpc/ps3: Do not adjust the wrapper load address
  powerpc: Remove the rest of the legacy iSeries include files
  powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
  init: Remove CONFIG_PPC_ISERIES
  powerpc: Remove FW_FEATURE ISERIES from arch code
  tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
  powerpc/spufs: Fix double unlocks
  powerpc/5200: convert mpc5200 to use of_platform_populate()
  powerpc/mpc5200: add options to mpc5200_defconfig
  powerpc/mpc52xx: add a4m072 board support
  powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
  Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
  powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
  powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
  MAINTAINERS: Update PowerPC 4xx tree
  powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
  powerpc: document the FSL MPIC message register binding
  powerpc: add support for MPIC message register API
  powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
  powerpc/85xx: mpc8548cds - add 36-bit dts
  ...
2012-03-21 18:55:10 -07:00
David Rientjes
08ab9b10d4 mm, oom: force oom kill on sysrq+f
The oom killer chooses not to kill a thread if:

 - an eligible thread has already been oom killed and has yet to exit,
   and

 - an eligible thread is exiting but has yet to free all its memory and
   is not the thread attempting to currently allocate memory.

SysRq+F manually invokes the global oom killer to kill a memory-hogging
task.  This is normally done as a last resort to free memory when no
progress is being made or to test the oom killer itself.

For both uses, we always want to kill a thread and never defer.  This
patch causes SysRq+F to always kill an eligible thread and can be used to
force a kill even if another oom killed thread has failed to exit.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:58 -07:00
Marcos Paulo de Souza
dc716e96f5 drivers/idle/intel_idle.c: fix confusing code identation
Fix a code indentation in the function intel_idle_cpu_init that looks
confusing.o

Suggested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:54 -07:00
stephen hemminger
5676cc7bfe sky2: override for PCI legacy power management
Some BIOS's don't setup power management correctly (what else is
new) and don't allow use of PCI Express power control. Add a special
exception module parameter to allow working around this issue.
Based on slightly different patch by Knut Petersen.

Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-21 16:54:36 -04:00
Linus Torvalds
e2a0883e40 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "This is _not_ all; in particular, Miklos' and Jan's stuff is not there
  yet."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
  ext4: initialization of ext4_li_mtx needs to be done earlier
  debugfs-related mode_t whack-a-mole
  hfsplus: add an ioctl to bless files
  hfsplus: change finder_info to u32
  hfsplus: initialise userflags
  qnx4: new helper - try_extent()
  qnx4: get rid of qnx4_bread/qnx4_getblk
  take removal of PF_FORKNOEXEC to flush_old_exec()
  trim includes in inode.c
  um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
  um: embed ->stub_pages[] into mmu_context
  gadgetfs: list_for_each_safe() misuse
  ocfs2: fix leaks on failure exits in module_init
  ecryptfs: make register_filesystem() the last potential failure exit
  ntfs: forgets to unregister sysctls on register_filesystem() failure
  logfs: missing cleanup on register_filesystem() failure
  jfs: mising cleanup on register_filesystem() failure
  make configfs_pin_fs() return root dentry on success
  configfs: configfs_create_dir() has parent dentry in dentry->d_parent
  configfs: sanitize configfs_create()
  ...
2012-03-21 13:36:41 -07:00
Linus Torvalds
3556485f15 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates for 3.4 from James Morris:
 "The main addition here is the new Yama security module from Kees Cook,
  which was discussed at the Linux Security Summit last year.  Its
  purpose is to collect miscellaneous DAC security enhancements in one
  place.  This also marks a departure in policy for LSM modules, which
  were previously limited to being standalone access control systems.
  Chromium OS is using Yama, and I believe there are plans for Ubuntu,
  at least.

  This patchset also includes maintenance updates for AppArmor, TOMOYO
  and others."

Fix trivial conflict in <net/sock.h> due to the jumo_label->static_key
rename.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits)
  AppArmor: Fix location of const qualifier on generated string tables
  TOMOYO: Return error if fails to delete a domain
  AppArmor: add const qualifiers to string arrays
  AppArmor: Add ability to load extended policy
  TOMOYO: Return appropriate value to poll().
  AppArmor: Move path failure information into aa_get_name and rename
  AppArmor: Update dfa matching routines.
  AppArmor: Minor cleanup of d_namespace_path to consolidate error handling
  AppArmor: Retrieve the dentry_path for error reporting when path lookup fails
  AppArmor: Add const qualifiers to generated string tables
  AppArmor: Fix oops in policy unpack auditing
  AppArmor: Fix error returned when a path lookup is disconnected
  KEYS: testing wrong bit for KEY_FLAG_REVOKED
  TOMOYO: Fix mount flags checking order.
  security: fix ima kconfig warning
  AppArmor: Fix the error case for chroot relative path name lookup
  AppArmor: fix mapping of META_READ to audit and quiet flags
  AppArmor: Fix underflow in xindex calculation
  AppArmor: Fix dropping of allowed operations that are force audited
  AppArmor: Add mising end of structure test to caps unpacking
  ...
2012-03-21 13:25:04 -07:00
Linus Torvalds
b8716614a7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "* sha512 bug fixes (already in your tree).
  * SHA224/SHA384 AEAD support in caam.
  * X86-64 optimised version of Camellia.
  * Tegra AES support.
  * Bulk algorithm registration interface to make driver registration easier.
  * padata race fixes.
  * Misc fixes."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits)
  padata: Fix race on sequence number wrap
  padata: Fix race in the serialization path
  crypto: camellia - add assembler implementation for x86_64
  crypto: camellia - rename camellia.c to camellia_generic.c
  crypto: camellia - fix checkpatch warnings
  crypto: camellia - rename camellia module to camellia_generic
  crypto: tcrypt - add more camellia tests
  crypto: testmgr - add more camellia test vectors
  crypto: camellia - simplify key setup and CAMELLIA_ROUNDSM macro
  crypto: twofish-x86_64/i586 - set alignmask to zero
  crypto: blowfish-x86_64 - set alignmask to zero
  crypto: serpent-sse2 - combine ablk_*_init functions
  crypto: blowfish-x86_64 - use crypto_[un]register_algs
  crypto: twofish-x86_64-3way - use crypto_[un]register_algs
  crypto: serpent-sse2 - use crypto_[un]register_algs
  crypto: serpent-sse2 - remove dead code from serpent_sse2_glue.c::serpent_sse2_init()
  crypto: twofish-x86 - Remove dead code from twofish_glue_3way.c::init()
  crypto: In crypto_add_alg(), 'exact' wants to be initialized to 0
  crypto: caam - fix gcc 4.6 warning
  crypto: Add bulk algorithm registration interface
  ...
2012-03-21 13:20:43 -07:00
Mauro Carvalho Chehab
a4b4be3fd7 edac: rename channel_info to rank_info
What it is pointed by a csrow/channel vector is a rank information, and
not a channel information.

On a traditional architecture, the memory controller directly access the
memory ranks, via chip select rows. Different ranks at the same DIMM is
selected via different chip select rows. So, typically, one
csrow/channel pair means one different DIMM.

On FB-DIMMs, there's a microcontroller chip at the DIMM, called Advanced
Memory Buffer (AMB) that serves as the interface between the memory
controller and the memory chips.

The AMB selection is via the DIMM slot, and not via a csrow.

It is up to the AMB to talk with the csrows of the DRAM chips.

So, the FB-DIMM memory controllers see the DIMM slot, and not the DIMM
rank. RAMBUS is similar.

Newer memory controllers, like the ones found on Intel Sandy Bridge and
Nehalem, even working with normal DDR3 DIMM's, don't use the usual
channel A/channel B interleaving schema to provide 128 bits data access.

Instead, they have more channels (3 or 4 channels), and they can use
several interleaving schemas. Such memory controllers see the DIMMs
directly on their registers, instead of the ranks, which is better for
the driver, as its main usageis to point to a broken DIMM stick (the
Field Repleceable Unit), and not to point to a broken DRAM chip.

The drivers that support such such newer memory architecture models
currently need to fake information and to abuse on EDAC structures, as
the subsystem was conceived with the idea that the csrow would always be
visible by the CPU.

To make things a little worse, those drivers don't currently fake
csrows/channels on a consistent way, as the concepts there don't apply
to the memory controllers they're talking with. So, each driver author
interpreted the concepts using a different logic.

In order to fix it, let's rename the data structure that points into a
DIMM rank to "rank_info", in order to be clearer about what's stored
there.

Latter patches will provide a better way to represent the memory
hierarchy for the other types of memory controller.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:22:50 -03:00
Mauro Carvalho Chehab
0142877aa4 i5400_edac: Avoid calling pci_put_device() twice
When i5400_edac driver is removed and re-loaded a few times, it causes
an OOPS, as it is currently decrementing some PCI device usage two
times.

When called inside a loop, pci_get_device() will call
pci_put_device(). That mangles the error count. In this specific
case, it seems easier to just duplicate the call.

Also fixes the error logic when pci_get_device fails.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:22:49 -03:00
Niklas Söderlund
df95e42e1f edac: i5100 ack error detection register after each read
If I only ack the detection register after a error have been detected
I'm unable to reliably detect errors. I have verified this behavior
using both an error injection DIMM and software to inject errors.

I can't find any documentation supporting this behavior in Intel 5100
Memory Controller Hub Chipset, see 1. So this is all based on
experimentation.

[1] Intel® 5100 Memory Controller Hub Chipset
    http://www.intel.com/content/dam/doc/datasheet/5100-
	memory-controller-hub-chipset-datasheet.pdf

Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:22:49 -03:00
Niklas Söderlund
b6378cb3e5 edac: i5100 fix erroneous define for M1Err
According to [1] the define for M1Err in the FERR_NF_MEM register is
wrong. It should be at position 1 not 0.

[1] Intel 5100 Memory Controller Hub Chipset Doc.Nr: 318378
    http://www.intel.com/content/dam/doc/datasheet/5100-
    memory-controller-hub-chipset-datasheet.pdf

Reported-by: Ba Thang Nguyen <thang.b.nguyen@dektech.com.au>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:20:55 -03:00
Hui Wang
7fae0db439 edac: sb_edac: Fix a wrong value setting for the previous value
>From the driver design, the variable limit wants to compare with its
previous value, we should set the value of limit instead of the value
of tmp_mb to the variable prev.

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:20:11 -03:00
Hui Wang
ad9c40b7dd edac: sb_edac: Fix a INTERLEAVE_MODE() misuse
We can identify dram interleave mode from the Dram Rule register
rather than Dram Interleave list register.

In this context, the reg of INTERLEAVE_MODE(reg) contains the Dram
Interleave list register, we can't get interleave mode from the reg,
while the variable interleave_mode saves the the mode got from the
Dram Rule register, so we use the variable to replace
INTERLEAVE_MDDE(reg) here.

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:20:02 -03:00
Hui Wang
22a5c27bec edac: sb_edac: Let the driver depend on PCI_MMCONFIG
This driver needs to access PCIe Extended Configuration Space
Registers (0x100~0xfff), to correctly access those registers, we need
to enable PCI_MMCONFIG option. Since this option is not enabled for
X86_64 by default, we let the driver depend on it to prevent users
forgetting to enable this option.

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:19:56 -03:00
Mauro Carvalho Chehab
b877763ea0 edac/ppc4xx_edac: Fix compilation
It seems that nobody is cross-compiling for this arch anymore...

drivers/edac/ppc4xx_edac.c: In function 'ppc4xx_edac_probe':
drivers/edac/ppc4xx_edac.c:188:12: error: storage class specified for parameter 'ppc4xx_edac_remove'
...
drivers/edac/ppc4xx_edac.c:1068:19: error: 'match' undeclared (first use in this function)
drivers/edac/ppc4xx_edac.c:1068:19: note: each undeclared identifier is reported only once for each function it appears in
drivers/edac/ppc4xx_edac.c:1068:36: warning: left-hand operand of comma expression has no effect [-Wunused-value]

Acked-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:19:44 -03:00
Mauro Carvalho Chehab
5b889e379f Fix sb_edac compilation with 32 bits kernels
As reported by Josh Boyer <jwboyer@redhat.com>:
>	drivers/edac/sb_edac.c: In function 'get_memory_error_data':
> 	drivers/edac/sb_edac.c:861:2: warning: left shift count >= width of type
> 	[enabled by default]
> 	<snip>
> 	ERROR: "__udivdi3" [drivers/edac/sb_edac.ko] undefined!
> 	make[1]: *** [__modpost] Error 1
> 	make: *** [modules] Error 2

PS.: compile-tested only

Reported-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21 15:19:38 -03:00
Linus Torvalds
31f6765266 hwmon changes for v3.4
Mostly cleanup. No new drivers this time around, but support for several chips
 added to existing drivers: TPS40400, TPS40422, MTD040, MAX34446, ZL9101M,
 ZL9117M, and LM96080. Also, added watchdog support for SCH56xx, and additional
 attributes for a couple of drivers.
 
 312869e hwmon: (sch56xx) Add support for the integrated watchdog (v2)
 840e191 hwmon: (w83627ehf) Add support for temperature offset registers
 86dda17 hwmon: (jc42) Remove unnecessary device IDs
 3360a10 hwmon: (zl6100) Add support for ZL9101M and ZL9117M
 9271126 hwmon: (adm1275) Add support for ADM1075
 590defe hwmon: (max34440) Add support for MAX34446
 60b873e hwmon: (pmbus) Add more virtual registers
 2163340 hwmon: (pmbus) Add support for Lineage Power MDT040
 c5f35c9 hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
 56aad5d hwmon: (max34440) Add support for 'lowest' output voltage attribute
 f15df57 hwmon: (jc42) Convert to use devm_kzalloc
 918ddef hwmon: (max16065) Convert to use devm_kzalloc
 b8a5a7c hwmon: (smm665) Convert to use devm_kzalloc
 3683928 hwmon: (ltc4261) Convert to use devm_kzalloc
 dd285ad hwmon: (pmbus) Simplify remove functions
 8b313ca hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
 07404aa hwmon: (lineage-pem) Convert to use devm_kzalloc
 f352df6 hwmon: (hwmon-vid) Fix checkpatch issues
 3230f70 hwmon: (hwmon-vid) Add new entries to VRM model table
 9908ad4 hwmon: (lm80) Add detection of NatSemi/TI LM96080
 0e190b7 hwmon: (lm87) Get rid of macro-generated functions
 8652a26 hwmon: (lm87) Reorganize the code
 0fc86ec hwmon: (applesmc) Silence uninitialized warnings
 7599d32 hwmon: (lm70) Fix: do not use assignment in if condition
 e200c14 hwmon: (lm70) Register hwmon device after creating attribute files, and remove it first
 01d9def hwmon: (w83l786ng) Fix multi-line comments
 130067d hwmon: (w83l785ts) Fix multi-line comments
 7950133 hwmon: (w83781d) Fix: do not use assignment in if condition
 aff6e00 hwmon: (w83781d) Fix multi-line comments
 2a52dd6 hwmon: (smsc47b397) Fix multi-line comments
 36564ef hwmon: (pc87427) Fix multi-line comments
 b6707b7 hwmon: (max1668) Fix multi-line comments
 1160631 hwmon: (lm80) Fix multi-line comments
 bf0f3a0 hwmon: (emc2103) Fix multi-line comments
 fbb6670 hwmon: (adm1031) Fix multi-line comments
 94b991d hwmon: (adm1029) Fix multi-line comments
 27b9de3 hwmon: (w83627hf) Fix checkpatch issues
 ca3ccad hwmon: (w83l786ng) Fix checkpatch issues
 47efe87 hwmon: (w83793) Fix checkpatch issues
 d174368 hwmon: (w83792d) Fix checkpatch issues
 2185696 hwmon: (vt1211) Fix: do not use assignment in if condition
 b162c03 hwmon: (vt1211) Fix checkpatch issues
 9004ac8 hwmon: (via686a) Fix checkpatch issues
 bce2778 hwmon: (pc87360) Fix: do not use assignment in if condition
 449a7a0 hwmon: (pc87360) Fix checkpatch issues
 8958dfb hwmon: (max1619): Fix checkpatch issues
 09770b2 hwmon: (lm85) Fix checkpatch issues
 9b03079 hwmon: (lm78) Fix checkpatch issues
 02fe2fd hwmon: (lm77) Fix checkpatch issues
 f445a9a hwmon: (gl520sm) Fix: do not use assignment in if condition
 43da3d1 hwmon: (gl520sm) Fix checkpatch issues
 228f8e0 hwmon: (gl518sm) Fix checkpatch issues
 c8de836 hwmon: (dme1737) Fix checkpatch issues
 8c10369 hwmon: (asb100): Fix checkpatch issues
 c387e4e hwmon: (adm9240) Fix checkpatch issues
 86aa3e2 hwmon: (adm1026) Fix checkpatch issues
 21d2a8f hwmon: (adm1021) Fix checkpatch issues
 1bd385d hwmon: (abituguru) Fix checkpatch issues
 8969e84 hwmon: (w83627ehf) Fix multi-line comments
 51683ee hwmon: (max1111) Fix multi-line comments
 1b05d22 hwmon: (ltc4151) Fix multi-line comments
 1b9c491 hwmon: (g760a) Fix multi-line comments
 20eaf72 hwmon: (f71882fg) Fix multi-line comments
 4bebced hwmon: (emc1403) Fix multi-line comments
 ca3c7b6 hwmon: (amc6821) Fix multi-line comments
 10775d1 hwmon: (ads7871) Fix multi-line comments
 d13d623 hwmon: (ads7828) Fix multi-line comments
 562fca2 hwmon: (abituguru3) Fix multi-line comments
 ec1c319 hwmon: (w83791d) Fix checkpatch issues
 a80b10c hwmon: (ultra45_env) Fix checkpatch issues
 4d387df hwmon: (thmc50) Fix checkpatch issues
 85a0c0d hwmon: (smsc47m1) Fix checkpatch issues
 7e61268 hwmon: (smsc47m1) Fix: do not use assignment in if condition
 7cc3cb6 hwmon: (smsc47m192) Fix checkpatch issues
 8fda79e hwmon: (sis5595) Fix checkpatch issues
 5725608 hwmon: (pcf8591) Fix checkpatch issues
 2804a4c hwmon: (lm93) Fix checkpatch issues
 a318afd hwmon: (lm92) Fix checkpatch issues
 073f1e6c hwmon: (lm87) Fix: do not use assignment in if condition
 c6370db hwmon: (lm87) Fix checkpatch issues
 525ad37 hwmon: (fschmd) Fix checkpatch issues
 f24d548 hwmon: (atxp1) Fix checkpatch issues
 724cc33 hwmon: (adt7462) Fix checkpatch issues
 790fa38 hwmon: (ltc4215) Fix multi-line comments
 430b4fc hwmon: (ltc4245) Fix multi-line comments
 a68abd3 hwmon: (wm8350-hwmon) Constify fixed string array
 85ebfd3 hwmon: (applesmc) Fix multi-line comments
 75bdc93 hwmon: (asus_atk0110) Fix multi-line comments
 3c4c497 hwmon: (it87) Constify fixed string arrays
 8deeac8 hwmon: (ad7414) Fix multi-line comments
 5d577db hwmon: (jc42) Fix multi-line comments
 780affe hwmon: (coretemp) Fix checkpatch error
 3af2861 hwmon: (pc87360) Fix multi-line comments
 07de3df hwmon: (wm831x-hwmon) Fix multi-line comments
 3c22e23 hwmon: (smm665) Fix checkpatch error
 3c56b06 hwmon: (asc7621) Fix multi-line comments
 4a0d71c hwmon: (it87) Fix multi-line comments
 86d566e hwmon: (hwmon-vid) Fix multi-line comments
 5ed0488 hwmon: (hwmon) Fix multi-line comments
 19f2c05 hwmon: (ds1621) Fix checkpatch issues
 91efffe hwmon: convert drivers/hwmon/* to use module_spi_driver()
 f0967ee hwmon: convert drivers/hwmon/* to use module_i2c_driver()
 61ba031 hwmon: (vt8231) Fix multi-line comments
 9ed5bc2 hwmon: (adt7475) Fix multi-line comments
 2fff084 hwmon: (f71805f) Fix checkpatch issues
 703af96 hwmon: (max6650) Fix multi-line comments
 c531eb3 hwmon: (w83781d) Fix checkpatch issues
 2b22de5 hwmon: (adm1025) Fix checkpatch issues
 7973841 hwmon: (abituguru3) Fix checkpatch issues
 65fe5c7 hwmon: (vt8231) Fix checkpatch issues
 bafda5d hwmon: (max6650) Fix checkpatch issues
 0117c3f hwmon: (pmbus) Replace strict_strtol with kstrtol
 b3789a0 hwmon: (lm83) fix checkpatch issues
 93092a6 hwmon: (k8temp) fix checkpatch issues
 96585f1 hwmon: (lm80) reset device if error occurred
 6a9e7c4c hwmon: (lm80) fix checkpatch warnings
 6b904b6 hwmon: (adt7470) fix checkpatch issues
 e6a83db hwmon: (adt7411) fix checkpatch issues
 56c24af hwmon: (lm70) fix checkpatch issues
 1dc3708 hwmon: (f71882fg) fix checkpatch issues
 c6e8ac0 hwmon: (asus_atk0110) fix checkpatch issues
 99b8c83 hwmon: (adt7475) fix checkpatch issues
 b2ae8f8 hwmon: (smm665) fix checkpatch issues
 c9e1498 hwmon: (sht15) fix checkpatch issues
 0910b28 hwmon: (ibmaem) fix checkpatch issues
 dcb7cb9 hwmon: (ad7414) fix checkpatch issues
 e91aef2 hwmon: (ad7418) fix checkpatch issues
 5996542 hwmon: (w83l785ts) fix checkpatch issues
 a6100f6 hwmon: (wm831x-hwmon) fix checkpatch issues
 839a9ee hwmon: fix checkpatch issues
 08f5090 hwmon: (adm1029) fix checkpatch issues
 4d7c5d4 hwmon: (g760a) fix checkpatch issues
 7b102ed hwmon: (i5k_amb) fix checkpatch issues
 600151b hwmon: use DEFINE_PCI_DEVICE_TABLE
 7fe83ad hwmon: remove () used with return
 a6bee4a hwmon: (amc6821) fix initialisation
 2faaa93 hwmon: (lm80) add error handling
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJPaJBFAAoJEMsfJm/On5mBhkMP/09vlmsG7J3TLHcSKYJBkvSx
 6VNOOJgPqnvF71Az0dX47SU3zVXhG3I7dZufd/hqOK+0CNylSB7OSZMcWvBTduea
 0hDLTYj++SyVDQfVXb3zCVLU/wAE3YuXB3umWPwAKit4s2wAYYRDVCjwK96B88rv
 llNvo6JryuJDBUq7xiEmr0vKWMO0mKwwjpMTGCD3NpzK02ZV49T0gM94xa4gi5nM
 QAhNeO1AzQTx0+mBSRlq+SBBLSiXQmHcNrhnxcRMPha1bEi1D+QESozsczr+9/lz
 8vuTIULOIZxafM4XkBsZdknvlZnYrA6ukituDfVfiYQVcljO/cNu+seutFQDCMJe
 1zTDoNGIAwwnw0sAWWmTQwUMi+GSvlaL20gmm8FhTlvQaj9hNETsPYxEvPEsBNY1
 ICCixZcwpa1mZBXmryz2btf8az0OlX/sApzyHiq24B7lSE5Fv4tBDtwypLRu5N8m
 C4oNXC2dqDU0gtVxzO5Lavu6LHWV9lhyZvRPO75+zxYt4i5cnO04GTAYWh46aOzO
 DAZcs8M2Rj++dI5VW9Vl0k8hP9eWjxtPJFhNv/OWTx4YYQRICrde+j7QZcikIUWF
 0bzYI/zeIcwOg059vhnglBFM3mr7Z92jm4mftcNaSj/zuUHbWf6AQLbIq86Zq7tF
 3Eru3WuTZTwAkyNAVWd5
 =cUoW
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon changes for v3.4 from Guenter Roeck:
 "Mostly cleanup.  No new drivers this time around, but support for
  several chips added to existing drivers: TPS40400, TPS40422, MTD040,
  MAX34446, ZL9101M, ZL9117M, and LM96080.  Also, added watchdog support
  for SCH56xx, and additional attributes for a couple of drivers."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (137 commits)
  hwmon: (sch56xx) Add support for the integrated watchdog (v2)
  hwmon: (w83627ehf) Add support for temperature offset registers
  hwmon: (jc42) Remove unnecessary device IDs
  hwmon: (zl6100) Add support for ZL9101M and ZL9117M
  hwmon: (adm1275) Add support for ADM1075
  hwmon: (max34440) Add support for MAX34446
  hwmon: (pmbus) Add more virtual registers
  hwmon: (pmbus) Add support for Lineage Power MDT040
  hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
  hwmon: (max34440) Add support for 'lowest' output voltage attribute
  hwmon: (jc42) Convert to use devm_kzalloc
  hwmon: (max16065) Convert to use devm_kzalloc
  hwmon: (smm665) Convert to use devm_kzalloc
  hwmon: (ltc4261) Convert to use devm_kzalloc
  hwmon: (pmbus) Simplify remove functions
  hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
  hwmon: (lineage-pem) Convert to use devm_kzalloc
  hwmon: (hwmon-vid) Fix checkpatch issues
  hwmon: (hwmon-vid) Add new entries to VRM model table
  hwmon: (lm80) Add detection of NatSemi/TI LM96080
  ...
2012-03-21 10:37:25 -07:00
Linus Torvalds
d15d76448b regulator: Updates for 3.4
This has been a fairly quiet release from a regulator point of view, the
 only real framework features added were devm support and a convenience
 helper for setting up fixed voltage regulators.
 
 We also added a couple of drivers (but will drop the BQ240022 driver via
 the arm-soc tree as it's been replaced by the more generic
 gpio-regulator driver) and Axel Lin continued his relentless and
 generally awesome stream of fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPZ2paAAoJEBus8iNuMP3d4EIP/3bUD9zVwwC5/+aedwtSoKGC
 eJXqdkJFYkEqLaeU5eobT79NFwzB/7JjVw7CMc/Z+9pXGwqSdA0T/k4j0EaTZWdo
 SMqPfXA2Ia7c67pixdZ32GcYuT53iiBj9ecWozM8LaOyQz0oif127e1OF6LGtQzC
 aWofP58MKrzDc+hmLixswgQVBKR5EDHna9XX7KnEL5ZdfRoyFsKkj752MJD1O6QN
 79+7G0D9uKYsTf5IamYdG9x/kKRvtRlFAXsb7oNY9Z25PydXnkys0SED6isgr7rr
 zgP+Q644fM09H68QgHuuJfsbDSrc0PjvLoOwISrDEQs4LH6usZLlTdZPQoqPc5uV
 kB5oodsz7tb8NCZW7Y8xc0rYrEwaQKpvTDoZ93V9Zp3qyzxexNxm4akBRRUsFj/0
 MxzyW+F81BxA35FIiRD55yZZ/U7ddoEzjea3tSvfGwDG1jMcV18t5G3LBThTAIIF
 kvo4+xM6a8TPmGdNRSoEyO9vHYob/QzQ2zb7Pujf2SQpp/ULi7DMdNnbp0K/UYxt
 pxwsj9IFR1rwPoHWwSfHZHWbioCeUkXwzf0ar4ydmg1U8AxQRPI2YNqVXP/BTPj6
 GJ6ksHkBK5eK/mcob1s8t7nZDTEY5fiQw3lbQwM4mJaJIO6vza8RrpAcAeICI9FX
 dLZmKQlMZ7vLLP6dSPx2
 =fbBu
 -----END PGP SIGNATURE-----

Merge tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates for 3.4 from Mark Brown:
 "This has been a fairly quiet release from a regulator point of view,
  the only real framework features added were devm support and a
  convenience helper for setting up fixed voltage regulators.

  We also added a couple of drivers (but will drop the BQ240022 driver
  via the arm-soc tree as it's been replaced by the more generic
  gpio-regulator driver) and Axel Lin continued his relentless and
  generally awesome stream of fixes and cleanups."

* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (93 commits)
  regulator: Fix up a confusing dev_warn when DT lookup fails
  regulator: Convert tps6507x to set_voltage_sel
  regulator: Refactor tps6507x to use one tps6507x_pmic_ops for all LDOs and DCDCs
  regulator: Make s5m8767_get_voltage_register always return correct register
  regulator: s5m8767: Check pdata->buck[2|3|4]_gpiodvs earlier
  regulator: tps65910: Provide settling time for DCDC voltage change
  regulator: Add Anatop regulator driver
  regulator: Simplify implementation of tps65912_get_voltage_dcdc
  regulator: Use tps65912_set_voltage_sel for both DCDCx and LDOx
  regulator: tps65910: Provide settling time for enabling rails
  regulator: max8925: Use DIV_ROUND_UP macro
  regulator: tps65912: Use simple equations to get register address
  regulator: Fix the logic of tps65910_get_mode
  regulator: Merge tps65217_pmic_ldo234_ops and tps65217_pmic_dcdc_ops to tps65217_pmic_ops
  regulator: Use DIV_ROUND_CLOSEST in wm8350_isink_get_current
  regulator: Use array to store dcdc_range settings for tps65912
  regulator: Rename s5m8767_convert_voltage to s5m8767_convert_voltage_to_sel
  regulator: tps6524x: Remove unneeded comment for N_REGULATORS
  regulator: Rename set_voltage_sel callback function name to *_sel
  regulator: Fix s5m8767_set_voltage_time_sel calculation value
  ...
2012-03-21 10:34:56 -07:00
Linus Torvalds
0c2fe82a9b InfiniBand/RDMA changes for the 3.4 merge window. Nothing big really
stands out; by patch count lots of fixes to the mlx4 driver plus some
 cleanups and fixes to the core and other drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJPZ2THAAoJEENa44ZhAt0hMgkP/AwXjwzz6lYlIizytQ5KOH11
 CT/VoHLIGIwY31aRhZRHggWLEbJi8akgfh04K9PiSh/muFRPYk5KJDoQEoJV5Odv
 12krqtpZeL41YcAPq0wiyP3Ki5AZDCDumzWbOtmxE9m93mVfi3yFTTWDHFo/7SOx
 A2kUITdKuZhgBpCFYS23Gs8QTWcMPUlwNlM76edG90BjSySHsK15tbqTUaEOC6Ux
 SPG0p0c2YjlZCPmRObrCL65o5LFRVajinZ4rXN7rre4LEU+IuXgW+mQU2Kwy8z6a
 oMPE2l4OMSqj270r2PlVK087gGH69nKfLgLQLJiP0Id+KwdYUk7vQcA+Fu0jwjP3
 Ci/ahllvB76IiaNbax0vTy2ohCJmilLLotAP46NW0vPR2/KnmVy0Mqk8pXQQddw4
 tnAFNnafn/MjTty8GwqyXR/enJZs29ePcSxcYnKjXYRIgG4ldejL2wktgSra8+gb
 3/qFag1HRgZzcICkXGpHj7uWJ2KDe++1m6KTb0THUmrjuiel6ATFZpYoeRed3GfS
 ZMqpjZvuXM8nA9CrKMkzm5vIiUFF8Qq0hUTLR38F8FiNEhmC08JqH5PqjJ3Z18if
 R1yG4W4xmp/0ICHg4zyg6LWV3YsweDD+jSCJpW+KNBvu3HtYb41HIlK+i2TTmtPD
 3etEZZRwROAyYKcwN01p
 =DbLx
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA changes for the 3.4 merge window from Roland Dreier:
 "Nothing big really stands out; by patch count lots of fixes to the
  mlx4 driver plus some cleanups and fixes to the core and other
  drivers."

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (28 commits)
  mlx4_core: Scale size of MTT table with system RAM
  mlx4_core: Allow dynamic MTU configuration for IB ports
  IB/mlx4: Fix info returned when querying IBoE ports
  IB/mlx4: Fix possible missed completion event
  mlx4_core: Report thermal error events
  mlx4_core: Fix one more static exported function
  IB: Change CQE "csum_ok" field to a bit flag
  RDMA/iwcm: Reject connect requests if cmid is not in LISTEN state
  RDMA/cxgb3: Don't pass irq flags to flush_qp()
  mlx4_core: Get rid of redundant ext_port_cap flags
  RDMA/ucma: Fix AB-BA deadlock
  IB/ehca: Fix ilog2() compile failure
  IB: Use central enum for speed instead of hard-coded values
  IB/iser: Post initial receive buffers before sending the final login request
  IB/iser: Free IB connection resources in the proper place
  IB/srp: Consolidate repetitive sysfs code
  IB/srp: Use pr_fmt() and pr_err()/pr_warn()
  IB/core: Fix SDR rates in sysfs
  mlx4: Enforce device max FMR maps in FMR alloc
  IB/mlx4: Set bad_wr for invalid send opcode
  ...
2012-03-21 10:33:42 -07:00
Linus Torvalds
5f0e685f31 SPI changes for v3.4.
Mostly a bunch of new drivers and driver bug fixes; but this also
 includes a few patches that create a core message queue infrastructure
 for the spi subsystem instead of making each driver open code it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPZ2QWAAoJEEFnBt12D9kB0LIP/2vtRDlf8wz7svU1Jc7hqkNs
 tH32KzUdHu4UJ2UzOqQC8PyeWFRbaTG26PYNKDSeuyT6ymkz2tNcAyOgzfnztPQF
 G/t25crIvN5L2940ZtBdJ24YV2wuIPnFAzGpPkFPpQKAbpXr0LLA42842++eX+Hg
 /eYkiwMjHXXN3BuoeqnMLNrdO2XaRkKbGeRW05gG/sGWKtVhbGmtlMWlNM3QhLix
 qAqUQ/tv0YqmlpZjv4t78EeqnH/Qw19F/o+Afbe50R1SEmzYDIMC1vby/eTImp5q
 8I2pJnLrk7CL1y2vQEDo+anvN+314yfCWk8FDr/ZvXf30vyzTe+gSEeeh8Z7EHHL
 w0BN8LFv6Odb5P38NS4knpUNZ7L66Va5psJhD+olERfmVaqXcnGdxS7WI8Hln8jQ
 H8pmXht7m561BN4YMBaT5n2F34BSAZqngAVVv6xfcuCWVphB/VJCpiBZ0HO0o4yP
 6T2FzoTWSRbEtht97AZmLCYdaDf0rYetrEGQSxKkiWAPnAgkCME7oR9FBqlLvRG0
 5LizCW0KX19EgjXAnJ4E1Syh2iMEZasYK6vPNG3zksMI0gzaRAzURitBN1TBxqzA
 L9LcTZO7kpuN9/ZgpDozMaNQaUO1T+Giz3IJm0GlqSMl8Xcii0St8sOiUqfdEKf5
 jKa1N0wliyDhPsT6wJlm
 =6Nsu
 -----END PGP SIGNATURE-----

Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull SPI changes for v3.4 from Grant Likely:
 "Mostly a bunch of new drivers and driver bug fixes; but this also
  includes a few patches that create a core message queue infrastructure
  for the spi subsystem instead of making each driver open code it."

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
  spi/fsl-espi: Make sure pm is within 2..32
  spi/fsl-espi: make the clock computation easier to read
  spi: sh-hspi: modify write/read method
  spi: sh-hspi: control spi clock more correctly
  spi: sh-hspi: convert to using core message queue
  spi: s3c64xx: Fix build
  spi: s3c64xx: remove unnecessary callback msg->complete
  spi: remove redundant variable assignment
  spi: release lock on error path in spi_pump_messages()
  spi: Compatibility with direction which is used in samsung DMA operation
  spi-topcliff-pch: add recovery processing in case wait-event timeout
  spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
  spi-topcliff-pch: Fix issue for transmitting over 4KByte
  spi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info
  spi/imx: simplify error handling to free gpios
  spi: Convert to DEFINE_PCI_DEVICE_TABLE
  spi: add Broadcom BCM63xx SPI controller driver
  SPI: add CSR SiRFprimaII SPI controller driver
  spi-topcliff-pch: fix -Wuninitialized warning
  spi: Mark spi_register_board_info() __devinit
  ...
2012-03-21 10:32:00 -07:00