Commit graph

299,176 commits

Author SHA1 Message Date
Wu Fengguang
468e6a20af writeback: remove vm_dirties and task->dirties
They are not used any more.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-11-17 20:49:06 +08:00
Wu Fengguang
1df647197c writeback: hard throttle 1000+ dd on a slow USB stick
The sleep based balance_dirty_pages() can pause at most MAX_PAUSE=200ms
on every 1 4KB-page, which means it cannot throttle a task under
4KB/200ms=20KB/s. So when there are more than 512 dd writing to a
10MB/s USB stick, its bdi dirty pages could grow out of control.

Even if we can increase MAX_PAUSE, the minimal (task_ratelimit = 1)
means a limit of 4KB/s.
                                                       
They can eventually be safeguarded by the global limit check 
(nr_dirty < dirty_thresh). However if someone is also writing to an 
HDD at the same time, it'll get poor HDD write performance.
                                                       
We at least want to maintain good write performance for other devices
when one device is attacked by some "massive parallel" workload, or
suffers from slow write bandwidth, or somehow get stalled due to some 
error condition (eg. NFS server not responding).

For a stalled device, we need to completely block its dirtiers, too,
before its bdi dirty pages grow all the way up to the global limit and
leave no space for the other functional devices.

So change the loop exit condition to

	/*
	 * Always enforce global dirty limit; also enforce bdi dirty limit
	 * if the normal max_pause sleeps cannot keep things under control.
	 */
	if (nr_dirty < dirty_thresh &&
	    (bdi_dirty < bdi_thresh || bdi->dirty_ratelimit > 1))
		break;

which can be further simplified to

	if (task_ratelimit)
		break;

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-11-17 20:39:32 +08:00
Randy Dunlap
869f8dfa52 platform/x86: fix dell-laptop function prototypes
Fix build warnings:
  drivers/platform/x86/dell-laptop.c:592:13: warning: function declaration isn't a prototype
  drivers/platform/x86/dell-laptop.c:599:13: warning: function declaration isn't a prototype

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-17 10:29:02 -02:00
Randy Dunlap
d29387e8de media/staging: fix allyesconfig build error
Fix x86 allyesconfig builds.  Builds fail due to a non-static variable
named 'debug' in drivers/staging/media/as102:

  arch/x86/built-in.o:arch/x86/kernel/entry_32.S:1296: first defined here
  ld: Warning: size of symbol `debug' changed from 90 in arch/x86/built-in.o to 4 in drivers/built-in.o

Thou shalt have no non-static identifiers that are named 'debug'.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-17 10:29:02 -02:00
Richard Zhao
f475058f48 ARM: imx6q: move clock register map to machine_desc.map_io
map_io is the only place to call iotable_init.

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
[shawn.guo: rename imx_clock_map_io() to imx6q_clock_map_io()]
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-11-17 20:14:01 +08:00
Peter Zijlstra
391e43da79 sched: Move all scheduler bits into kernel/sched/
There's too many sched*.[ch] files in kernel/, give them their own
directory.

(No code changed, other than Makefile glue added.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-17 12:20:22 +01:00
Peter Zijlstra
029632fbb7 sched: Make separate sched*.c translation units
Since once needs to do something at conferences and fixing compile
warnings doesn't actually require much if any attention I decided
to break up the sched.c #include "*.c" fest.

This further modularizes the scheduler code.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-x0fcd3mnp8f9c99grcpewmhi@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-17 12:20:19 +01:00
Donggeun Kim
3627902377 hwmon: (exynos4_tmu) Fix Kconfig dependency
Rename dependency of EXYNOS4_TMU in Kconfig to the existing one.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-17 03:16:19 -08:00
Jan Kara
249ec93c01 ocfs2: Use filemap_write_and_wait() instead of write_inode_now()
Since ocfs2 has no ->write_inode method, there's no point in calling
write_inode_now() from ocfs2_cleanup_delete_inode().  Use
filemap_write_and_wait() instead. This helps us to cleanup inode writing
interfaces...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17 02:18:57 -08:00
Mark Fasheh
df295d4a4b ocfs2: honor O_(D)SYNC flag in fallocate
We need to sync the transaction which updates i_size if the file is marked
as needing sync semantics.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17 02:15:58 -08:00
Wang Sheng-Hui
6416b9fa43 mm: cleanup the comment for head/tail pages of compound pages in mm/page_alloc.c
Only tail pages point at the head page using their ->first_page fields.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 10:53:50 +01:00
Xiaowei.Hu
0393afea31 ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2
With indexed_dir enabled, ocfs2 maintains a list of dirblocks having
space.

The credit calculation in ocfs2_link_credits() did not correctly account
for adding an entry that exactly fills a dirblock that triggers removing
that dirblock by changing the pointer in the previous block in the list.
The credit calculation did not account for that previous block.

To expose, do:

mkfs.ocfs2 -b 512 -M local /dev/sdX
mount /dev/sdX /ocfs2
mkdir /ocfs2/linkdir
touch /ocfs2/linkdir/file1
for i in `seq 1 29` ; do link /ocfs2/linkdir/file1
/ocfs2/linkdir/linklinklinklinklinklink$i; done
rm -f /ocfs2/linkdir/linklinklinklinklinklink10
sleep 8
link /ocfs2/linkdir/file1
/ocfs2/linkdir/linklinklinklinklinklinkaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Note:
The link names have been crafted for a 512 byte blocksize. Reproducing
with a larger blocksize will require longer (or more) links. The sleep
is important. We want jbd2 to commit the transaction so that the missing
block does not piggy back on account of the previous transaction.

Signed-off-by: XiaoweiHu <xiaowei.hu at oracle.com>
Reviewed-by: WengangWang <wen.gang.wang at oracle.com>
Reviewed-by: Sunil.Mushran <sunil.mushran at oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17 01:46:48 -08:00
Dan Magenheimer
e41d33af7c ocfs2: send correct UUID to cleancache initialization
ocfs2: Fix cleancache initialization call to correctly pass uuid

As reported by Steven Whitehouse in https://lkml.org/lkml/2011/5/27/221
the ocfs2 volume UUID is incorrectly passed to cleancache.
As a result, shared-ephemeral tmem pools will not actually
be created; instead they will be private (unshared) which
misses out on a major benefit of tmem.

Reported-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17 01:46:48 -08:00
Wengang Wang
b8a0ae579f ocfs2: Commit transactions in error cases -v2
There are three cases found that in error cases, journal transactions are not
committed nor aborted. We should take care of these case by committing the
transactions. Otherwise, there would left a journal handle which will lead to
, in same process context, the comming ocfs2_start_trans() gets wrong credits.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17 01:46:47 -08:00
Wengang Wang
8298524803 ocfs2: make direntry invalid when deleting it
When we deleting a direntry from a directory, if it's the first in a block we
invalid it by setting inode to 0; otherwise, we merge the deleted one to the
prior and contiguous direntry. And we don't truncate directories.

There is a problem for the later case since inode is not set to 0.
This problem happens when the caller passes a file position as parameter to
ocfs2_dir_foreach_blk(). If the position happens to point to a stale(not
the first, deleted in betweens of ocfs2_dir_foreach_blk()s) direntry, we are
not able to recognize its staleness. So that we treat it as a live one wrongly.

The fix is to set inode to 0 in both cases indicating the direntry is stale.
This won't introduce additional IOs.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17 01:46:46 -08:00
Julia Lawall
fc9f899483 fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free
Memory allocated using kmem_cache_zalloc should be freed using
kmem_cache_free, not kfree.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,e,e1,e2;
@@

x = kmem_cache_zalloc(e1,e2)
... when != x = e
?-kfree(x)
+kmem_cache_free(e1,x)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17 01:46:46 -08:00
Vinod Koul
e0d23ef29e Merge branch 'dma_slave_direction' into next_test_dirn
resolved conflicts:
	drivers/media/video/mx3_camera.c
2011-11-17 14:54:57 +05:30
Vinod Koul
55ba4e5ed4 USB-renesas: move to dma_transfer_direction
fixup usage of dma direction by introducing dma_transfer_direction,
this patch moves usb/renesas driver to use new enum

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2011-11-17 14:36:16 +05:30
Vinod Koul
8341544c9d USB-musb: move to dma_transfer_direction
fixup usage of dma direction by introducing dma_transfer_direction,
this patch moves usb/musb driver to use new enum

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
2011-11-17 14:35:26 +05:30
Tomoya MORINAGA
ca7fe2db89 pch_dma: Support new device LAPIS Semiconductor ML7831 IOH
ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17 14:27:41 +05:30
Tomoya MORINAGA
e79e72be29 pch_dma: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
On October 1 in 2011,
OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor
Co., Ltd.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17 14:27:41 +05:30
Sascha Hauer
8e2d41f8c8 dma i.MX: remove individual SOC dependency
The individual SoC dependency in Kconfig hardly scales anymore.
Instead of having such a fine grained dependency just depend
on ARCH_MXC and risk that the uninformed user has to look in
the help text to figure out which driver is the correct one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17 14:26:16 +05:30
Ciaran McCormick
dbb004294a dma: fix spacing for method declaration, coding style issue in iop-adma.c
Signed-off-by: Ciaran McCormick <ciaranmccormick@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17 14:25:25 +05:30
David S. Miller
8d26784cf0 ipv6: Use pr_warn() in ip6_fib.c
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17 03:18:28 -05:00
Matti Vaittinen
14df015bb1 IPV6 Fix a crash when trying to replace non existing route
This patch fixes a crash when non existing IPv6 route is tried to be changed.

When new destination node was inserted in middle of FIB6 tree, no relevant
sanity checks were performed. Later route insertion might have been prevented
due to invalid request, causing node with no rt info being left in tree.
When this node was accessed, a crash occurred.

Patch adds missing checks in fib6_add_1()

Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17 03:16:25 -05:00
Francesco Virlinzi
102463b18d stmmac: fix pm functions avoiding sleep on spinlock
This patch fixes the pm functions to avoid the system
sleeps while a spinlock is taken.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17 03:13:42 -05:00
Srinivas Kandagatla
989508ba60 stmmac: remove spin_lock in stmmac_ioctl.
This patch removes un-needed spin_lock in stmmac_ioctl while reading and
writing mdio registers. While holding spin_lock the code must be
atomic, which is not true in this case as both mdiobus_read and writes
have mutex locks.

Without this patch reading mdio registers via mii-tool results in below
BUG:
mii-tool -vvv eth0"
Using SIOCGMIIPHY=0x8947
BUG: sleeping function called from invalid context at kernel/mutex.c:287
in_atomic(): 1, irqs_disabled(): 0, pid: 614, name: mii-tool
2 locks held by mii-tool/614:
 #0:  (rtnl_mutex){......}, at: [<c01fd80c>] dev_ioctl+0x550/0x674
 #1:  (&priv->lock){......}, at: [<c01b34ec>] stmmac_ioctl+0x4c/0x78
[<c002ea14>] (unwind_backtrace+0x0/0xcc) from [<c0272c38>]
(mutex_lock_nested+0x24/0x35c)
[<c0272c38>] (mutex_lock_nested+0x24/0x35c) from [<c01b237c>]
(mdiobus_read+0x44/0x70)
[<c01b237c>] (mdiobus_read+0x44/0x70) from [<c01b0c64>]
(phy_mii_ioctl+0x4c/0x138)
[<c01b0c64>] (phy_mii_ioctl+0x4c/0x138) from [<c01b34fc>]
(stmmac_ioctl+0x5c/0x78)
[<c01b34fc>] (stmmac_ioctl+0x5c/0x78) from [<c01fcec8>]
(dev_ifsioc+0x2a4/0x2c8)
[<c01fcec8>] (dev_ifsioc+0x2a4/0x2c8) from [<c01fd81c>]
(dev_ioctl+0x560/0x674)
[<c01fd81c>] (dev_ioctl+0x560/0x674) from [<c00c36e0>]
(vfs_ioctl+0x2c/0x8c)
[<c00c36e0>] (vfs_ioctl+0x2c/0x8c) from [<c00c4130>]
(do_vfs_ioctl+0x530/0x578)
[<c00c4130>] (do_vfs_ioctl+0x530/0x578) from [<c00c41ac>]
(sys_ioctl+0x34/0x54)
[<c00c41ac>] (sys_ioctl+0x34/0x54) from [<c0028aa0>]
(ret_fast_syscall+0x0/0x2c)

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17 03:13:42 -05:00
Giuseppe CAVALLARO
19e30c1437 stmmac: parameters auto-tuning through HW cap reg
New GMAC devices (newer than the databook 3.50a) have the
HW capability register that provides which features are actually
supported by the hardware.

On old devices many information have to be passed through the
platform, for example: enhanced descriptor structure,
TX COE etc. These are mandatory to properly configure the driver.
This remains still valid because the driver has to support old
Synopsys devices but now it's also able to override them using the
values from the HW capability register if supported.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17 03:13:41 -05:00
Srinivas Kandagatla
c5b9b4e4b9 stmmac: fix advertising 1000Base capabilties for non GMII iface
This patch fixes the way to stop the 1000Base advertising
capabilties for non GMII interfaces.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17 03:13:41 -05:00
Francesco Virlinzi
bbc1754639 stmmac: use mdelay on timeout of sw reset
This patch uses an mdelay to manage the timeout on
sw reset to be independant of cpu_clk.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17 03:13:41 -05:00
Alexander Beregalov
aab9440453 libata: fix build without BMDMA
fix these errors:
drivers/ata/libata-sff.c:2538:3: error: implicit declaration of function
'ata_pci_bmdma_prepare_host'
drivers/ata/libata-sff.c:2549:40: error: 'ata_bmdma_interrupt'
undeclared (first use in this function)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-17 02:11:42 -05:00
Rob Herring
ff95613500 [libata] ahci_platform: fix DT probing
The change in commit 904c04feaf "ahci_platform: Add the board_ids..."
doesn't work for the DT probing case as platform_get_device_id returns
NULL. Pick the default ahci_port_info in this case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Richard Zhu <richard.zhu@linaro.org>
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-17 02:10:49 -05:00
Will Deacon
a313f4c55d powerpc/signal32: Fix sigset_t conversion when copying to user
On PPC64, put_sigset_t converts a sigset_t to a compat_sigset_t
before copying it to userspace. There is a typo in the case that
we have 4 words to copy, meaning that we corrupt the compat_sigset_t.

It appears that _NSIG_WORDS can't be greater than 2 at the moment
so this code is probably always optimised away anyway.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-17 16:41:10 +11:00
Benjamin Herrenschmidt
b97021f855 powerpc: Fix atomic_xxx_return barrier semantics
The Documentation/memory-barriers.txt document requires that atomic
operations that return a value act as a memory barrier both before
and after the actual atomic operation.

Our current implementation doesn't guarantee this. More specifically,
while a load following the isync can not be issued before stwcx. has
completed, that completion doesn't architecturally means that the
result of stwcx. is visible to other processors (or any previous stores
for that matter) (typically, the other processors L1 caches can still
hold the old value).

This has caused an actual crash in RCU torture testing on Power 7

This fixes it by changing those atomic ops to use new macros instead
of RELEASE/ACQUIRE barriers, called ATOMIC_ENTRY and ATMOIC_EXIT barriers,
which are then defined respectively to lwsync and sync.

I haven't had a chance to measure the performance impact (or rather
what I measured with kernel compiles is in the noise, I yet have to
find a more precise benchmark)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-11-17 16:26:07 +11:00
Kyle Moffett
a9a8f77ac7 powerpc: Remove buggy 9-year-old test for binutils < 2.12.1
Recent binutils refuses to assemble AltiVec opcodes when in e500/SPE
mode, as some of those opcodes alias the "SPE" instructions.  This
triggers an ancient binutils version check even when building a kernel
with CONFIG_ALTIVEC disabled.

In theory, the check could be conditionalized on CONFIG_ALTIVEC, but in
practice it has long outlived its utility.  It is virtually impossible
to find binutils older than 2.12.1 (released 2002) in the wild anymore.
Even ancient RedHat Enterprise Linux 4 has binutils-2.14.

To fix the kernel build when done natively on e500 systems with this new
binutils, the test is simply removed.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-17 16:26:07 +11:00
Kumar Gala
187b9f2aa7 powerpc/book3e-64: Fix debug support for userspace
With the introduction of CONFIG_PPC_ADV_DEBUG_REGS user space debug is
broken on Book-E 64-bit parts that support delayed debug events.  When
switch_booke_debug_regs() sets DBCR0 we'll start getting debug events as
MSR_DE is also set and we aren't able to handle debug events from kernel
space.

We can remove the hack that always enables MSR_DE and loads up DBCR0 and
just utilize switch_booke_debug_regs() to get user space debug working
again.

We still need to handle critical/debug exception stacks & proper
save/restore of state for those exception levles to support debug events
from kernel space like we have on 32-bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-17 16:26:07 +11:00
Kumar Gala
b95bc21914 powerpc: Remove extraneous CONFIG_PPC_ADV_DEBUG_REGS define
All of DebugException is already protected by CONFIG_PPC_ADV_DEBUG_REGS
there is no need to have another such ifdef inside the function.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-17 16:26:07 +11:00
Kumar Gala
ba28c9aae2 powerpc: Revert show_regs() define for readability
We had an existing ifdef for 4xx & BOOKE processors that got changed to
CONFIG_PPC_ADV_DEBUG_REGS.  The define has nothing to do with
CONFIG_PPC_ADV_DEBUG_REGS.  The define really should be:

 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)

and not

 #ifdef CONFIG_PPC_ADV_DEBUG_REGS

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-17 16:26:07 +11:00
Keith Packard
9a10f401a4 drm/i915: Use DPCD value for max DP lanes.
The BIOS VBT value for an eDP panel has been shown to be incorrect on
one machine, and we haven't found any machines where the DPCD value
was wrong, so we'll use the DPCD value everywhere.

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-11-16 20:26:27 -08:00
Keith Packard
b34f1f0931 drm/i915: Initiate DP link training only on the lanes we'll be using
Limit the link training setting command to the lanes needed for the
current mode. It seems vaguely possible that a monitor will try to
train the other lanes and fail in some way, so this seems like the
safer plan.

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-11-16 20:26:27 -08:00
Keith Packard
f2e8b18af9 drm/i915: Remove trailing white space
Found a couple of bare tabs in intel_dp.c

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-11-16 20:26:26 -08:00
Keith Packard
cdb0e95bf5 drm/i915: Try harder during dp pattern 1 link training
Instead of going through the sequence just once, run through the whole
set up to 5 times to see if something can work. This isn't part of the
DP spec, but the BIOS seems to do it, and given that link training
failure is so bad, it seems reasonable to follow suit.

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-11-16 20:26:26 -08:00
Keith Packard
21264c638b drm/i915: Make DP prepare/commit consistent with DP dpms
Make sure the sequence of operations in all three functions makes
sense:

 1) The backlight must be off unless the screen is running
 2) The link must be running to turn the eDP panel on/off
 3) The CPU eDP PLL must be running until everything is off

Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-16 20:26:26 -08:00
Keith Packard
99ea7127a3 drm/i915: Let panel power sequencing hardware do its job
The panel power sequencing hardware tracks the stages of panel power
sequencing and signals when the panel is completely on or off. Instead
of blindly assuming the panel timings will work, poll the panel power
status register until it shows the correct values.

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-11-16 20:26:26 -08:00
Keith Packard
417e822dee drm/i915: Treat PCH eDP like DP in most places
PCH eDP has many of the same needs as regular PCH DP connections,
including the DP_CTl bit settings, the TRANS_DP_CTL register.

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-11-16 20:26:26 -08:00
Keith Packard
93f62dad5f drm/i915: Remove link_status field from intel_dp structure
No persistent data was ever stored here, so link_status is instead
allocated on the stack as needed.

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-11-16 20:26:25 -08:00
Keith Packard
832dd3c17f drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control
Every usage of PCH_PP_CONTROL sets the PANEL_UNLOCK_REGS value to
ensure that writes will be respected, move this to a common function
to make the driver cleaner.

No functional changes.

Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-16 20:26:25 -08:00
david decotigny
8f5f69824f forcedeth: stats updated with a deferrable timer
Mark stats timer as deferrable: punctuality in waking the stats timer
callback doesn't matter much, as it is responsible only to avoid
integer wraparound.

We need at least 1 other timer to fire within 17s (fully loaded 1Gbps)
to avoid wrap-arounds. Desired period is still 10s.

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 23:14:03 -05:00
david decotigny
0a1f222d24 forcedeth: account for dropped RX frames
This adds code to update the stats counter for dropped RX frames.

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 23:14:03 -05:00
david decotigny
f5d827aece forcedeth: implement ndo_get_stats64() API
This commit implements the ndo_get_stats64() API for forcedeth. Since
hardware stats are being updated from different contexts (process and
timer), this commit adds synchronization. For software stats, it
relies on the u64_stats_sync.h API.

Tested:
  - 16-way SMP x86_64 ->
    RX bytes:7244556582 (7.2 GB)  TX bytes:181904254 (181.9 MB)
  - pktgen + loopback: identical rx_bytes/tx_bytes and rx_packets/tx_packets

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 23:14:02 -05:00