Commit graph

299,176 commits

Author SHA1 Message Date
Michał Mirosław
bc5787c612 net: remove legacy ethtool ops
As all drivers are converted, we may now remove discrete offload setting
callback handling.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:43:08 -05:00
Rick Jones
33a5ba144e net: sweep-up some straglers in strlcpy conversion of .get_drvinfo routines
Convert some remaining straglers' .get_drvinfo routines to use strlcpy
rather than strcpy/strncpy.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:38:55 -05:00
Joe Perches
5e773fdc53 pch_gbe: Move #include of module.h
The first #include must be pch_gbe.h as it
does a #define of pr_fmt.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:38:03 -05:00
Dmitry Kravkov
eb2afd4a62 bnx2x: cache-in compressed fw image
Re-request fw from fs may fail for different reasons, once the fw was
loaded we won't release it until driver is removed.

This also resolves the boot problem when initial fw is located on initrd,
but rootfs is still unavailable, in this case device reset will fail due
to absence of fw files.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:37:15 -05:00
David Howells
7845bc3964 KEYS: Give key types their own lockdep class for key->sem
Give keys their own lockdep class to differentiate them from each other in case
a key of one type has to refer to a key of another type.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-11-17 09:35:32 +11:00
Jean-Christophe PLAGNIOL-VILLARD
eccab1ec87 net/cadence: enable by default NET_ATMEL
so the defconfig of the atmel continue to have the support of the network
as before

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:33:50 -05:00
stephen hemminger
fa2da8cdae bridge: correct IPv6 checksum after pull
Bridge multicast snooping of ICMPv6 would incorrectly report a checksum problem
when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE.
When bytes are removed from skb, the computed checksum needs to be adjusted.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Martin Volf <martin.volf.42@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:32:43 -05:00
Eric Dumazet
588f033075 net: use jump_label for netstamp_needed
netstamp_needed seems a good candidate to jump_label conversion.

This avoids 3 conditional branches per incoming packet in fast path.

No measurable difference, given that these conditional branches are
predicted on modern cpus. Only a small icache reduction, thanks to the
unlikely() stuff.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:30:06 -05:00
Einar Lueck
0284a0fdf3 qeth: Reduce CPU consumption through less SIGA-r calls
Patch avoids SIGA-r calls in case of SIGA-r required. It only calls
SIGA-r if a threshold of free buffer is reached. CPU consumption is
reduced as a consequence.

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:28:20 -05:00
Frank Blaschka
1d36cb479f qeth: l3 fix rcu splat in xmit
when use dst_get_neighbour to get neighbour, we need
rcu_read_lock to protect, since dst_get_neighbour uses
rcu_dereference.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:28:14 -05:00
Ursula Braun
1d503563f7 netiucv: reinsert dev_alloc_name for device naming
Invocation of dev_alloc_name() is re-inserted, because the created
net_device name is used to create the device name for the iucv bus.
This device is created before the register_netdev call.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:28:10 -05:00
Christian Borntraeger
7c01a8e56b qeth: remove WARN_ON leftover
The patch "qeth: exploit asynchronous delivery of storage blocks"
added a WARN_ON in qeth_schedule_recovery. A device recovery should
not cause a kernel warning. This is obviously a debugging  left-over
that we forgot to remove.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:28:04 -05:00
Ursula Braun
6cc31d09be qeth: return with -EPERM if sniffing is not enabled
Without appropriate configuration at the SE, a HiperSockets device
cannot be used for sniffing. Setting the sniffer attribute is rejected
with -EPERM.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:27:59 -05:00
Rick Jones
66846048f5 enable virtio_net to return bus_info in ethtool -i consistent with emulated NICs
Add a new .bus_name to virtio_config_ops then modify virtio_net to
call through to it in an ethtool .get_drvinfo routine to report
bus_info in ethtool -i output which is consistent with other
emulated NICs and the output of lspci.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:26:46 -05:00
Eric Dumazet
709e8697af tcp: clear xmit timers in tcp_v4_syn_recv_sock()
Simon Kirby reported divides by zero errors in __tcp_select_window()

This happens when inet_csk_route_child_sock() returns a NULL pointer :

We free new socket while we eventually armed keepalive timer in
tcp_create_openreq_child()

Fix this by a call to tcp_clear_xmit_timers()

[ This is a followup to commit 918eb39962 (net: add missing
bh_unlock_sock() calls) ]

Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 16:57:45 -05:00
Al Viro
c133449587 switch create_mnt_ns() to saner calling conventions, fix double mntput() in nfs
Life is much saner if create_mnt_ns(mnt) drops mnt in case of error...
Switch it to such calling conventions, switch callers, fix double mntput() in
fs/nfs/super.c one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-16 16:12:14 -05:00
Al Viro
8d514bbf37 btrfs: fix double mntput() in mount_subvol()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-16 16:06:09 -05:00
Dmitry Artamonow
20403e845f watchdog: fix initialisation printout in s3c2410_wdt
Looks like a typo creeped in, and driver prints
s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq abled

instead of
s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq enabled

Also it may completely disinform about irq status, as it prints
"irq enabled" when S3C2410_WTCON_INTEN is in fact 0.

Fix it.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-16 22:04:17 +01:00
Mark Brown
f984910085 watchdog: Don't overwrite error value in wm831x_wdt_set_timeout()
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-16 22:00:10 +01:00
Szymon Janc
1ec918cef5 Bluetooth: Fix some checkpatch.pl errors and warnings
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 18:30:21 -02:00
Szymon Janc
250938cb37 Bluetooth: Simplify __l2cap_global_chan_by_addr
Make __l2cap_global_chan_by_addr similar to other find functions.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 18:29:44 -02:00
Szymon Janc
d1726b6dc9 Bluetooth: Refactor loop in l2cap_retransmit_one_frame
This make it easier to see what is the real reason for loop to exit.
skb_queue_next return valid skb or garbage, not NULL.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 18:29:28 -02:00
Szymon Janc
039d9572f1 Bluetooth: Simplify l2cap_add_to_srej_queue
Make it easier to see what is loop break condition.
skb_queue_next return valid skb or garbage, not NULL.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 18:29:07 -02:00
Szymon Janc
aef89f214e Bluetooth: Fix possible NULL pointer derefence in l2cap code
Due to ERTM reliability L2CAP channel needs to be disconnected if
adding to srej list failed.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 18:28:37 -02:00
Mimi Zohar
9c69898783 encrypted-keys: module build fixes
Encrypted keys are encrypted/decrypted using either a trusted or
user-defined key type, which is referred to as the 'master' key.
The master key may be of type trusted iff the trusted key is
builtin or both the trusted key and encrypted keys are built as
modules.  This patch resolves the build dependency problem.

- Use "masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS)" construct
to encapsulate the above logic. (Suggested by Dimtry Kasatkin.)
- Fixing the encrypted-keys Makefile, results in a module name change
from encrypted.ko to encrypted-keys.ko.
- Add module dependency for request_trusted_key() definition

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-11-16 14:23:14 -05:00
Mimi Zohar
f4a0d5abef encrypted-keys: fix error return code
Fix request_master_key() error return code.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-11-16 14:23:13 -05:00
Dave Jones
face37f5e6 slab: add taint flag outputting to debug paths.
When we get corruption reports, it's useful to see if the kernel was
tainted, to rule out problems we can't do anything about.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-11-16 21:14:44 +02:00
Dave Jones
265d47e711 slub: add taint flag outputting to debug paths
When we get corruption reports, it's useful to see if the kernel was
tainted, to rule out problems we can't do anything about.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-11-16 21:14:40 +02:00
Andrei Emeltchenko
36acbb1ada Bluetooth: Allow to set AMP type for virtual HCI
Type can be changed during re-opening device /dev/vhci.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:54:34 -02:00
Andrei Emeltchenko
07e3b94ac3 Bluetooth: Do not set HCI_RAW when HS enabled
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:54:29 -02:00
Andrei Emeltchenko
8830f51410 Bluetooth: Move scope of kernel parameter enable_hs
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:54:29 -02:00
Salman Qazi
4cecf6d401 sched, x86: Avoid unnecessary overflow in sched_clock
(Added the missing signed-off-by line)

In hundreds of days, the __cycles_2_ns calculation in sched_clock
has an overflow.  cyc * per_cpu(cyc2ns, cpu) exceeds 64 bits, causing
the final value to become zero.  We can solve this without losing
any precision.

We can decompose TSC into quotient and remainder of division by the
scale factor, and then use this to convert TSC into nanoseconds.

Signed-off-by: Salman Qazi <sqazi@google.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Reviewed-by: Paul Turner <pjt@google.com>
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111115221121.7262.88871.stgit@dungbeetle.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-16 19:51:25 +01:00
Brian Gix
453a83869c Bluetooth: Add MGMT opcodes for Passkey Entry
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:49:56 -02:00
Brian Gix
9ad4019a71 Bluetooth: Add HCI defines for User Passkey entry
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:49:52 -02:00
Johan Hedberg
450dfdafbc Bluetooth: Pass all message parameters to mgmt_start_discovery
The mgmt_start_discovery command contains the type of discovery that
should be started so this should be passed to the start_discovery
function. This patch doesn't yet add any action depending on the type of
the requested discovery.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:32:00 -02:00
Johan Hedberg
0e5f875a8f Bluetooth: Add missing cmd_complete for mgmt_load_link_keys
The command complete event was completely missing for this command.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:23:06 -02:00
Johan Hedberg
ca69b7957b Bluetooth: Create a unique mgmt error code hierarchy
The management protocol uses a single byte for error codes (aka command
status). In some places this value is directly copied from HCI and in
other a POSIX error number is used. This makes it impossible for
user-space to uniquily decipher the meaning of an error.

To solve this issue a new mgmt-specific set of error codes is added
along with a conversion table for HCI status values.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:07:52 -02:00
Johan Hedberg
8680570b0c Bluetooth: Return success instead of EALREADY for mgmt commands
When the adapter state is already what is requested it's more friendly
to user-space to simply report success than to send a EALREADY error
message.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 16:05:50 -02:00
Johan Hedberg
1425acb74b Bluetooth: Fix mgmt_pair_device imediate error responses
When possible cmd_complete should be returned instead of cmd_status
since it contains the remote address (this helps user-space track what
exactly failed).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 15:59:49 -02:00
Johan Hedberg
ba4e564f60 Bluetooth: Add address type to mgmt_pair_device
The kernel needs to know whether it should connect to a device over
BR/EDR or over LE. This is particularly important in the future when
dual-mode device may be connectable also over LE. It is also important
if/when we decide to move the LE advertisement cache from the kernel
into user-space. Adding the type to the mgmt command also ensures
conformance with the latest mgmt API spec.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 15:57:12 -02:00
Andre Guedes
e6d465cb48 Bluetooth: mgmt_stop_discovery_failed()
This patches creates mgmt_stop_discovery_failed() which removes
pending MGMT_OP_STOP_DISCOVERY commands and sends proper command
status events.

This patch also fixes the MGMT_OP_STOP_DISCOVERY command leak in
case cancel inquiry fails.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 15:40:30 -02:00
Andre Guedes
7a13510902 Bluetooth: Rename mgmt_inquiry_failed()
This patch renames the function mgmt_inquiry_failed() to
mgmt_start_discovery_failed(). This function is more related
to MGMT_OP_START_DISCOVERY command handling than to inquiry.
Besides, this functions will be reused by LE based discovery
procedures in case of failure.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-16 15:40:19 -02:00
Mauro Carvalho Chehab
4e145349a1 [media] em28xx: Fix some Terratec entries (H5 and XS)
As reported by  Andreas Oberritter <obi@linuxtv.org>, changeset
33ba28eebc did the wrong thing.

Fix it to properly reflect the entries for Terratec H5 revs 1 and 2,
and restore Terratec XS entry.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-16 15:36:51 -02:00
Lars-Peter Clausen
7e5ec63ef5 regmap: Add support for 10/14 register formating
This patch adds support for 10 bits register, 14 bits value type register
formating. This is for example used by the Analog Devices AD5380.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-16 17:34:53 +00:00
Lars-Peter Clausen
19254411db regmap: Try cached read before checking if a hardware read is possible
For some register format types we do not provide a parse_val so we can not do a
hardware read. But a cached read is still possible, so try to read from the
cache first, before checking whether a hardware read is possible. Otherwise the
cache becomes pretty useless for these register types.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-16 17:34:53 +00:00
Lars-Peter Clausen
720e4616e8 regmap: Make reg_config reg_defaults const
The reg_defaults field usually points to a static per driver array, which should
not be modified. Make requirement this explicit by making reg_defaults const.
To allow this the regcache_init code needs some minor changes. Previoulsy the
reg_config was not available in regcache_init and regmap->reg_defaults was used
to pass the default register set to regcache_init. Now that the reg_config is
available we can work on it directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-16 17:34:53 +00:00
Lars-Peter Clausen
e5e3b8abed regmap: Move initialization of regcache related fields to regcache_init
Move the initialization regcache related fields of the regmap struct to
regcache_init. This allows us to keep regmap and regcache code better
separated.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-16 17:34:53 +00:00
Mark Brown
086834e2d2 ASoC: Say how long short WM8958 DSP2 firmwares are
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-16 17:33:58 +00:00
Dan Carpenter
99cb2ddcc6 xen-gntalloc: signedness bug in add_grefs()
gref->gref_id is unsigned so the error handling didn't work.
gnttab_grant_foreign_access() returns an int type, so we can add a
cast here, and it doesn't cause any problems.
gnttab_grant_foreign_access() can return a variety of errors
including -ENOSPC, -ENOSYS and -ENOMEM.

CC: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16 12:13:48 -05:00
Dan Carpenter
21643e69a4 xen-gntalloc: integer overflow in gntalloc_ioctl_alloc()
On 32 bit systems a high value of op.count could lead to an integer
overflow in the kzalloc() and gref_ids would be smaller than
expected.  If the you triggered another integer overflow in
"if (gref_size + op.count > limit)" then you'd probably get memory
corruption inside add_grefs().

CC: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16 12:13:47 -05:00