Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=2fc6, idProduct=f0b5
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iBasso DC-Elite
usb 1-1: Manufacturer: iBasso
usb 1-1: SerialNumber: CTUA171130B
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217D8FF419F24378196FCEFD2FA2@TYUPR06MB6217.apcprd06.prod.outlook.com
Remove the mic bias current comparator threshold override (NID 0x1c,
verb 0x320, value 0x010) from Conexant codec driver.
This override was originally intended to support volume up/down controls on
headsets with inline remote controls, but it causes microphone detection
failures on some headsets with impedance less than 1k ohm.
After consulting with the vendor's engineers, it was confirmed that this
setting is board-specific and should be handled by BIOS/firmware rather
than the generic codec driver, especially since inline remote support
is not currently implemented.
Fixes: 7aeb259086 ("ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260713100329.306892-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some units of the Lenovo Legion Pro 7 16ARX8H (82WS) report codec
subsystem ID 17aa:38a7 instead of 17aa:38a8. Since only 38a8 has a
codec SSID quirk, these machines fall through to the PCI SSID match
17aa:386f (Legion Pro 7i 16IAX7) and get ALC287_FIXUP_CS35L41_I2C_2,
which probes the Cirrus amplifiers of the Intel variant. The TI
TAS2781 amplifier (ACPI TIAS2781:00) present on this AMD variant is
never bound and the internal speakers remain silent.
Add a codec SSID quirk for 17aa:38a7 pointing to
ALC287_FIXUP_TAS2781_I2C, mirroring the existing 38a8 entry.
Tested on a Legion Pro 7 16ARX8H (82WS, BIOS LPCN62WW): with the codec
SSID overridden to 17aa:38a8 via the HDA patch loader, the TAS2781
amplifier binds and the internal speakers work.
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Laine <damien.laine@gmail.com>
Link: https://patch.msgid.link/20260712213708.1835469-1-damien.laine@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal speakers on the MECHREVO WUJIE Series are silent,
while the headphone output works correctly.
The BIOS reports NID 0x1b on the Realtek ALC233 codec as
unconnected with pin configuration 0x411111f0. However, the pin
is connected to an internal speaker.
Overriding NID 0x1b with 0x90170150 makes the HDA generic parser
detect both 0x14 and 0x1b as speaker outputs and restores internal
speaker playback.
Add a pin configuration fixup for the affected PCI SSID c011:1d05.
Tested on a MECHREVO WUJIE Series laptop with board
WUJIE Series-Lark4-LNL and firmware EM_LNL326_V1.0.23.
Signed-off-by: Chen Bowen <hicbowen@gmail.com>
Link: https://patch.msgid.link/20260710133409.16641-1-hicbowen@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fail cs35l56_hda_fw_load() and log an error if it didn't find a wmfw file
and the BIOS didn't patch the firmware already. Also remove a section of
code from cs35l56_hda_request_firmware_files() that attempted to find a
.bin if a .wmfw was not found.
The CS35L56 ROM can only provide default audio in SoundWire mode. A wmfw
is needed to enable I2S audio. Also none of the customer-specific .bin
files are compatible with the ROM firmware. So a .wmfw file is always
required.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260709161211.686498-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Salvador reported that the recent fix for applying the DSD quirk to
Musical Fidelity devices broke for his M6s DAC model (2772:0502).
Although this is basically a firmware bug, the model in question is
fairly old, and no further firmware update can be expected, so it'd be
better to address in the driver side.
As an ad hoc workaround, skip the DSD quirk for this device by adding
an empty quirk entry of 2772:0502; this essentially skips the later
DSD quirk entry by the match with the vendor 2772.
Fixes: da3a7efff6 ("ALSA: usb-audio: Update for native DSD support quirks")
Reported-by: Salvador Blaya <tiniebla6@gmail.com>
Closes: https://lore.kernel.org/CAOdyq+qFaqCh=tK_wNnA64hv5pQuA1Y09ANxQ=xK8yR-t4mf9Q@mail.gmail.com
Tested-by: Salvador Blaya <tiniebla6@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260709095614.1418838-1-tiwai@suse.de
A fairly standard set of device specific fixes and quriks for new
devices, nothing too remarkable here.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpQzScACgkQJNaLcl1U
h9Acswf/YuuWxVmg7I3gIIqShjWWrriqRqaFnUm8RwqrGZimv50jy2cYEhIbEEI+
cGCyi8xU1w97WGZurLNWa/aqMX2i/PGCevB7g+Skz8jeHYQrP/wJEmdRehHReXBW
xOlgMUTqjzpPE3G7rRnlTLLjjVJNU5Th1FBwlxiLmXWHuCB7wma+kbLpR5RZeeXg
BYPPVxScR7tVQy5Meh8CQ/bspgHjo2ZYIxRfvTM1/zLc9V0QiMzp4QJzHIwGipwZ
iI42Yla32ydkINpQcUUvlAGZ5zynDLgM/Acp9gxleoZqpRNJBLHpbS311e71QnMR
GIntQDk1Ry7gm0LA9dYdPE1ElU7XwQ==
=s5TT
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.2-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
A fairly standard set of device specific fixes and quriks for new
devices, nothing too remarkable here.
Make the Kconfig item for cirrus_scodec visible if CONFIG_KUNIT is
enabled. This is so that its KUnit test can be enabled by KUnit
scripts without requiring a large amount of irrelevant additional
components.
The general rule for KUNIT_ALL_TESTS is that it should only enable
tests for components that are already selected. However, the UML
environment does not support ACPI, which means the HDA codec drivers
that use cirrus_scodec cannot be selected. But cirrus_scodec does not
need ACPI.
By making the Kconfig option visible if CONFIG_KUNIT, the KUnit test
can be enabled with only the minimal set of functionality that is
required for cirrus_scodec.
This is still compliant with the KUNIT_ALL_TESTS rule "only tests
for enabled modules" because by default cirrus_scodec will only be
enabled if the drivers that use it are enabled. It must be
intentionally enabled to force it to be included for testing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260709121224.614350-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This platform booted with Ubuntu 24.04 with Pipewire audio server. So,
it has pop noise with headphone. But it's normal with Pulseaudio server.
This patch was the workaround. Connect the headphones to DAC 0x2.
The popping sound will disappear.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/34b990cb56914148ba02fa8e9d176479@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In tas2562_parse_dt(), the fallback lookup for the deprecated
"shut-down" GPIO property is broken due to a missing pair of braces.
The code intends to reset sdz_gpio to NULL only when the lookup
returns an error that is not -EPROBE_DEFER (so the driver gracefully
continues without a GPIO). However, without braces the statement:
tas2562->sdz_gpio = NULL;
falls outside the IS_ERR() check and is executed unconditionally
for every path through the if block, including a successful GPIO
lookup.
This means any device using the deprecated 'shut-down' DT property
will always have sdz_gpio == NULL after probe, making the GPIO
completely non-functional.
Fix this by adding the missing braces to scope the NULL assignment
inside the IS_ERR() branch, matching the pattern already used for
the primary 'shutdown' GPIO lookup above.
Fixes: f78a97003b ("ASoC: tas2562: Update shutdown GPIO property")
Signed-off-by: Uday Khare <udaykhare77@gmail.com>
Link: https://patch.msgid.link/20260706153109.10953-1-udaykhare77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if the jack is forced to the microphone mode, it will report
as line in. Correct the report to microphone.
Fixes: fc918cbe87 ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260708103430.1395207-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ravi Hothi <ravi.hothi@oss.qualcomm.com> says:
This series adds audio support for the Qualcomm Eliza SoC. Eliza uses
the same LPASS macro codec hardware as SM8550, so the existing SM8550
fallback compatible is reused for all four macro codecs (RX, TX, VA,
WSA). The sound card is compatible with the SM8450 generation machine
driver.
Patch 1 documents the Eliza LPASS macro codec compatibles in the
dt-bindings for RX, TX, VA and WSA macros.
Patch 2 documents the Eliza sound card compatible.
Patch 3 adds the Eliza sound card entry to the machine driver.
Link: https://patch.msgid.link/20260703073434.2589657-1-ravi.hothi@oss.qualcomm.com
The HP Laptop 15-fd0xxx uses GPIO bit 0 to control the mic mute LED,
but currently the quirk only enables the speaker mute LED (via coef
bit). Switch to the existing ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO
fixup which additionally registers a GPIO-based mic mute LED, mapping
to the same verbs (SET_GPIO_DATA/SET_GPIO_DIRECTION bit 0) that the
platform firmware uses.
Signed-off-by: Kshamendra Kumar Mishra <kshamendrakumarmishra@gmail.com>
Link: https://patch.msgid.link/DJSOWKFBTJH8.2Z7EPWX514QXM@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute LED on HP Victus 15-fa0xxx (board ID 8A50) uses ALC245 but
requires a quirk to work. This patch enables the existing
ALC245_FIXUP_HP_MUTE_LED_COEFBIT quirk for the device.
Tested on my HP Victus 15-fa0xxx. The LED behaviour works as intended.
Signed-off-by: Rohit Sinha <rohitsinha12043@gmail.com>
Link: https://patch.msgid.link/20260706211834.384022-1-rohitsinha12043@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The device with USB ID 040b:0897 (Weltrend Semiconductor chipset,
sold rebranded as the Redragon H510-PRO Wireless headset, reporting
"XiiSound Technology Corporation" in its USB string descriptors)
reports a constant value on GET_CUR for its PCM Playback Volume
control while still supporting an actually tunable volume. This
trips the sticky-value detection in check_sticky_volume_control(),
which disables the mixer control entirely:
usb 1-4: 5:0: sticky mixer values (0/100/1 => 80), disabling
As a result, the device boots with playback volume effectively muted
and provides no way to raise it through the normal ALSA/PipeWire
mixer path.
Apply QUIRK_FLAG_MIXER_GET_CUR_BROKEN so the sticky check marks the
control as get_cur_broken and relies on the cached value instead of
disabling the mixer control outright.
Tested by backporting this quirk flag and the supporting
get_cur_broken logic onto a Linux 7.1.2-zen kernel build that does
not yet carry it, and confirming that after applying the flag the
kernel log changes from
usb 1-4: 5:0: sticky mixer values (0/100/1 => 80), disabling
to
usb 1-4: 5:0: broken mixer GET_CUR (0/100/1 => 80)
with the control usable via the driver's cached value afterward.
Signed-off-by: Agustin Luzardo <agustinluzardo09@gmail.com>
Link: https://patch.msgid.link/20260705184227.113588-1-agustinluzardo09@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The condition 'irq_flag | wake_irq_flag' uses bitwise OR to combine two
integer flags that are used as booleans. Replace with logical OR '||' to
correctly express the intended boolean check.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Fixes: 7f91f012c1 ("ASoC: amd: ps: fix for irq handler return status")
Link: https://patch.msgid.link/20260707060130.2514138-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver handles ACP6.3/7.0/7.1/7.2 platforms but the region was
claimed with the stale name "AMD ACP6.2 audio" left over from the
original ACP6.2 driver. Correct it to "AMD ACP6.3 audio".
Fixes: 95e43a170b ("ASoC: amd: add Pink Sardine ACP PCI driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260707060130.2514138-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BIOS/firmware may re-enable MSI in PCI config space during system
level resume even though this driver only uses legacy INTx interrupts.
If MSI is left enabled with stale address/data registers, the device
will write interrupts to a bogus address causing IOMMU IO_PAGE_FAULT
and interrupt delivery failure.
Clear the MSI Enable bit before reinitializing the ACP hardware on
system level resume.
Fixes: 4916283880 ("ASoC: amd: ps: add callback functions for acp pci driver pm ops")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260707060130.2514138-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add driver data and ACPI match table entries for the TAS2783 on ACP7.0 and
ACP7.1 platforms using SoundWire link 0.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20260702104429.1157-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2S FIFO soft-resets its fast domain on start (AIU_RST_SOFT bit 0 +
AIU_I2S_SYNC read in aiu_fifo_i2s_trigger), mirroring the downstream
vendor driver's audio_out_i2s_enable(). The S/PDIF FIFO has no equivalent:
it only toggles the IEC958 DCU, so a stale datapath FIFO can be replayed,
producing the "machine gun noise" buffer underrun - on start when switching
outputs, and on stop when playback ends. The latter is audible on devices
with an always-on S/PDIF-fed DAC (e.g. the ES7144 on the WeTek Play2).
The vendor driver resets the IEC958 fast domain (AIU_RST_SOFT bit 2) on
both enable and disable (audio_hw_958_enable), and when reconfiguring
(audio_hw_958_reset clears AIU_958_DCU_FF_CTRL then resets). Do the same:
reset before enabling the DCU on start, and before disabling on stop.
Fixes: 6ae9ca9ce9 ("ASoC: meson: aiu: add i2s and spdif support")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20260627131205.808800-1-christianshewitt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel HD Audio defines Coefficient Index and Processing Coefficient as
separate audio widget controls in the Audio Widget Verb Definitions:
Coefficient Index selects the coefficient slot, while Processing
Coefficient accesses the value at the selected slot.
hda_reg_read_coef() selects the slot with AC_VERB_SET_COEF_INDEX, but
then uses AC_VERB_GET_COEF_INDEX for the value read. That reads back the
selected index instead of the coefficient value. hda_reg_write_coef()
has the same issue and builds the value write from AC_VERB_GET_COEF_INDEX
instead of AC_VERB_SET_PROC_COEF.
This only affects the regmap coefficient cache path used by codecs that
set codec->cache_coef. Direct coefficient helpers already use the normal
SET_COEF_INDEX followed by GET_PROC_COEF or SET_PROC_COEF sequence, which
is likely why this has not been noticed widely.
Use AC_VERB_GET_PROC_COEF for cached coefficient reads and
AC_VERB_SET_PROC_COEF for cached coefficient writes.
Fixes: 40ba66a702 ("ALSA: hda - Add cache support for COEF read/write")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/DB9023BF2920BA99+20260707132419.1731342-1-raoxu@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALSA FireWire driver headers include <linux/firewire.h>, which
already provides struct ieee1394_device_id via
<linux/device-id/ieee1394.h>.
Drop the now-redundant direct <linux/mod_devicetable.h> includes
from the per-device headers.
Signed-off-by: Longlong Xia <xialonglong2025@163.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260706032639.273929-1-xialonglong2025@163.com
The ASUS ROG Ally X (RC72LA, PCI SSID 0x1043:0x1eb3) leaves the combo
jack microphone pin (0x19) unconfigured, so a headset microphone is
neither detected nor captured. Only the internal microphone is
available.
Add a pin override that configures node 0x19 as an external headset
mic, the same way the original ROG Ally does. The headphone output
fixup chain is preserved, so speaker and headphone routing are
unchanged.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260707005615.52889-2-matthew.schwartz@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS ROG Ally X (RC72LA, PCI SSID 0x1043:0x1eb3) with an ALC294
codec produces no sound from the headphone jack, and unplugging the
headphones can leave the speakers muted too.
The device uses ALC287_FIXUP_TAS2781_I2C, which chains into the
ThinkPad fixup chain. alc285_fixup_thinkpad_x1_gen7() makes the
headphone (pin 0x21) and speaker (pin 0x17) share DAC 0x03. That is
correct for a ThinkPad, but here the shared DAC is exposed as a
"Line Out" control that defaults to zero, so the headphones stay
silent when plugged in.
Add a dedicated fixup chain for the Ally X that sets up the TAS2781
amplifier and the headset jack without the ThinkPad DAC sharing, and
routes the speaker to DAC 0x02 so the headphone and speaker get
independent DACs.
Also, fixup the wrong product code (it's RC72LA, not RCLA72).
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260707005615.52889-1-matthew.schwartz@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix undefined reference to `snd_soc_acpi_amd_sdca_is_device_rt712_vb`
linker error when CONFIG_SND_SOC_ACPI_AMD_MATCH=y and
CONFIG_SND_SOC_ACPI_AMD_SDCA_QUIRKS=m, which causes built-in code to
reference a symbol only available in a module.
Fix this by changing SND_SOC_ACPI_AMD_SDCA_QUIRKS from tristate to bool
and compiling the quirks code directly into snd-soc-acpi-amd-match
rather than as a separate module. This ensures the quirks symbols are
always available at link time when the match tables reference them.
Fixes: 10d366a846 ("ASoC: amd: acp: Fix Kconfig dependencies for SND_SOC_ACPI_AMD_SDCA_QUIRKS")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260703123314.147977-1-syed.sabakareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On ThinkPad X1 Carbon Gen 13 (Lunar Lake, RT712-SDCA version VA) the
3.5mm headphone jack is silent after rebooting from Windows.
rt712_sdca_va_io_init() gates rt712_sdca_calibration() on the persisted
vendor SW_CONFIG1 flag, and io_init writes SW_CONFIG1=1 at the end
regardless of whether the calibration succeeded. Across a warm reboot
the codec keeps power, so SW_CONFIG1 stays unchanged, the calibration
may be skipped, and the retained state can be invalid, leaving the
headphone amp disabled.
This patch mimics the reset sequence in rt711-sdca.c, it adds an
rt712_sdca_reset() helper, and calls it from io_init so the codec is
reset before initialization. RT712_PARA_VERB_CTL,
RT712_HIDDEN_REG_SW_RESET and RT712_HDA_LEGACY_RESET_CTL are already
defined but were unused. The reset clears SW_CONFIG1 and the analog
state so rt712_sdca_calibration() runs from a clean state and
completes.
Problem reproducible: boot Windows (headphone is good) -> reboot
to Linux (silent).
The reproducibility may depend on Windows' behaviour.
Signed-off-by: Tianze Shao <shaotianze@outlook.com>
Link: https://patch.msgid.link/TYCPR01MB872223CB999D2099A5E0F58DC4F62@TYCPR01MB8722.jpnprd01.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I accidentally made an off-by-a-line mistake when mimicking other code
paths that set all channels. The mistake breaks sticky mixers with
multiple channels.
I didn't realize this mistake at that time, as my device's mixer is
single-channel.
Fix it, so that per-channel volume of sticky mixers is balanced.
Fixes: aa2f4addab ("ALSA: usb-audio: Set the value of potential sticky mixers to maximum")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260706-uac-sticky-channels-fix-v1-1-92741c538283@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models
-----BEGIN PGP SIGNATURE-----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=eXcj
-----END PGP SIGNATURE-----
Merge tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models"
* tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
Documentation: sound: tas675x: Fix temperature range and impedance documentation
ASoC: codecs: tas675x: Fix CHx temperature range register bit fields
ASoC: codecs: tas675x: use READ_ONCE for params to be used concurrently
ASoC: rsnd: adg: make rsnd_adg_clk_control() idempotent
ASoC: SOF: validate probe info element counts
ALSA: usx2y: us144mkii: fix work UAF on disconnect
ASoC: amd: yc: Add Alienware m15 R7 AMD to DMIC quirk table
ALSA: hda/realtek: Add quirk for HP Victus 16-e0xxx (88EE) to enable mute LED
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
usb_ep1_command_reply_dispatch() uses buf[0] as a command byte and then
reads command-specific fixed items from the same URB buffer. Several
paths use buf + 1, buf[1], buf[2], or buf + 3 without first proving that
urb->actual_length contains those bytes.
Add per-command length checks, use a payload length derived from the
bytes after the command byte for the control-state copy, and reject short
analog input payloads before the input helper reads fixed offsets from
the EP1 reply.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260705084601.56400-1-pengpeng@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similar to commit 67c7381522 ("ALSA: hda/realtek: fix mic boost on
Framework PTL") and previous quirks for Framework systems with
Realtek codecs.
0010 is another platform with an ALC285 which needs the same quirk.
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Link: https://patch.msgid.link/20260705-framework-audio-ssid-0x0010-v1-1-fffc8996ac18@frame.work
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Laptop 15-dw0xxx with subsystem ID 103c:85f0 needs the
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2 quirk to correctly disable and
enable the Audio Mute LED.
Add the missing quirk entry.
Signed-off-by: Federico Lombardo <lombardo.federico.lf@gmail.com>
Link: https://patch.msgid.link/20260702204347.187524-1-lombardo.federico.lf@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A fairly standard set of driver specific fixes and quirks that have come
in since the merge window, plus a MAINTAINERS update. The tas675x
READ_ONCE change is probably not actually fixing issues properly but we
need a whole new approach to concurrency there and it came along with
some good fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpGs+4ACgkQJNaLcl1U
h9ACNwf/Tn088OJahzUFoky3ZZo/BYIf+Fg0Dsc4rhYZxxuolL8ahW5505KXsNt/
zqAViW+Stk+CcYRnMHHUcUvU9QNo5m7rG2L6fi5vxR5TckFNktIi21HgR12vmRE2
vQB6Oxwf2wHJogrtNplA1BUTz+3f3pho3yXu/7dDN+rARHnXxS31/mGStzRP2dhO
xl74IQ0Gg+7vCOHkmH2LTKOmZMxUFOfSriejyTNqNiUbZrufeCpA6u64ply05wD+
Hawc5hg1qaTykIGvr+cvZyav2Z8lvQmiDAcCp19bp4sk3HPo15U1ZdeqdVFkBXjK
B+OfMgQZrN5b3sIA7vhj9ztDT/RSmA==
=aubo
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
A fairly standard set of driver specific fixes and quirks that have come
in since the merge window, plus a MAINTAINERS update. The tas675x
READ_ONCE change is probably not actually fixing issues properly but we
need a whole new approach to concurrency there and it came along with
some good fixes.
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
scu_supply is enabled alongside scu and scu_x2 during normal SRC
operation, but rsnd_src_suspend() and rsnd_src_resume() only disable
and re-enable scu and scu_x2. The supply clock is left enabled across
a system suspend and its prepare/enable refcount becomes unbalanced
after a suspend/resume cycle.
Disable scu_supply in rsnd_src_suspend() and re-enable it in
rsnd_src_resume() so the SRC clocks are managed consistently across
system PM transitions.
Fixes: ef19ecf042 ("ASoC: rsnd: Add system suspend/resume support")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260630175329.4145703-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sen Wang <sen@ti.com> says:
Few miscellaneous bug fixes after the initial merge of TAS675x driver, of
which includes:
- Adding READ_ONCE for all concurrent read params
- Corrected kcontrol bits for temperature range
- Corrected conversion notes in the driver documentation
Link: https://patch.msgid.link/20260630183126.2588322-1-sen@ti.com
The initial merged patch mixed up the bits for temp reg with LDG report,
now fixing to the right bits according to TRM (SLOU589A).
Fixes: 133c81f844 ("ASoC: codecs: Add TAS67524 quad-channel audio amplifier driver")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-3-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
active_playback_dais and active_capture_dais are written atomically via
set_bit()/clear_bit() and can be read concurrently from the
fault_check_work delayed work handler.
fault_check_work already uses READ_ONCE; extend the same guard to all other
reads in tas675x_hw_params() and tas675x_mute_stream().
Fixes: 133c81f844 ("ASoC: codecs: Add TAS67524 quad-channel audio amplifier driver")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-2-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_adg_clk_control() is asymmetric on the disable path: the clkin
clocks are guarded by clkin_rate[], but the "adg" clock is disabled
unconditionally. If an enable attempt fails (for example a clkin
failing to turn on during resume), the error path correctly rolls
everything back, but rsnd_resume() ignores the return value, so the
following system suspend calls rsnd_adg_clk_disable() again and
underflows the "adg" clock enable count:
adg_0_clks1 already disabled
WARNING: drivers/clk/clk.c:1188 clk_core_disable+0xa4/0xac
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
rsnd_adg_clk_control+0x9c/0x2cc
rsnd_suspend+0x20/0x74
device_suspend+0x140/0x3ec
dpm_suspend+0x168/0x270
Track the enable state explicitly and bail out of redundant
enable/disable calls, mirroring what is already done for the per-SSI
clock prepare state. A failed enable leaves the state as disabled, so
the next suspend becomes a no-op and the next resume retries cleanly.
Fixes: 47899d53f8 ("ASoC: rsnd: adg: Add per-SSI ADG and SSIF supply clock management")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260610164704.2211321-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Probe information replies contain a firmware-provided element count. IPC3
uses that count to copy an array, then returns the unchecked count to its
caller. A short reply can therefore make the caller walk beyond the copied
array.
IPC4 similarly uses the count both to allocate the destination array and
to walk the reply. On 32-bit systems the allocation size can wrap, while on
all systems an excessive count reads beyond the reply payload.
Validate each count against the actual reply size before copying or
allocating the array, and use kcalloc() for the IPC4 allocation.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260628000329.18606-1-alhouseenyousef@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
tascam_disconnect() cancels capture_work and midi_in_work before
usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs
self-resubmit, and their completion handlers reschedule the work.
A URB that completes in the small window between cancel_work_sync() and
usb_kill_anchored_urbs() therefore re-arms the work after its only
cancel. Nothing cancels it again before snd_card_free() frees the
card-private tascam structure, so the work handler then runs on freed
memory.
Kill the anchored URBs before cancelling the work; once the work is
cancelled no remaining URB can complete to re-arm it.
Fixes: c1bb0c13e4 ("ALSA: usb-audio: us144mkii: Implement audio capture and decoding")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260701095231.1020811-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Alienware m15 R7 AMD exposes an ACP6x DMIC path, but its DMI
product name is not present in the Yellow Carp ACP quirk table. As a
result, the ACP machine driver does not enable the DMIC card on this
system.
Add the DMI product name for this machine. With this quirk applied, the
kernel reports:
acp_yc_mach acp_yc_mach.0: Enabling ACP DMIC support via DMI
and ALSA exposes the ACP DMIC capture device:
card 3: acp6x
device 0: DMIC capture dmic-hifi-0
Tested on an Alienware m15 R7 AMD with product SKU 0B59.
Link: https://jethachan.net/dev/2026/03/21/fixing-internal-microphone-alienware-linux.html
Assisted-by: OpenAI-Codex:gpt-5.5
Signed-off-by: Jetha Chan <jethachan@gmail.com>
Link: https://patch.msgid.link/20260630003328.15675-1-jethachan@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mute LED on the HP Victus 16-e0xxx (board ID 88EE, ALC245 codec)
does not function by default. Add the ALC245_FIXUP_HP_MUTE_LED_COEFBIT
quirk to enable it. Tested on my HP Victus 16-e0xxx with kernel 7.1.2.
Signed-off-by: Shubham Nayak <shubhamnayak392reborn@gmail.com>
Link: https://patch.msgid.link/20260629-hp-victus-16-mute-led-v1-1-ab0f4a8a533b@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
According to both the static definition in downstream...
yupik-audio-overlay.dtsi: qcom,bolero-version = <4>;
#define BOLERO_VERSION_2_0 0x0004)
and the runtime detection:
CDC_VA_TOP_CSR_CORE_ID_0=0x1
CDC_VA_TOP_CSR_CORE_ID_1=0xf
SC7280 has LPASS Codec Version 2.0 and not, as declared with
sm8250_va_data LPASS_CODEC_VERSION_1_0.
Create new va_macro_data with .version not set to use the runtime
detection and correctly get .version = LPASS_CODEC_VERSION_2_0.
Fixes: 77212f300b ("ASoC: codecs: lpass-va-macro: set the default codec version for sm8250")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260526-sc7280-va-macro-2-0-v1-1-2c1b572fa388@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In capture_urb_complete(), usb_anchor_urb() is called on every
completion callback, but the URB is already anchored from the
initial submission in tascam_trigger_start(). Each redundant call
corrupts the anchor's doubly-linked list and inflates the URB
refcount. When usb_kill_anchored_urbs() traverses the list during
stream stop / suspend / disconnect, the corrupted list leads to
use-after-free.
Remove the redundant usb_anchor_urb() from the resubmit path.
Cc: stable@vger.kernel.org
Fixes: c1bb0c13e4 ("ALSA: usb-audio: us144mkii: Implement audio capture and decoding")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260627042949.61767-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments caiaq
/ Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight
-----BEGIN PGP SIGNATURE-----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=hJ5w
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
