Commit graph

563,629 commits

Author SHA1 Message Date
James Liao
41b3e0f067 soc: mediatek: Fix random hang up issue while kernel init
In kernel late init, it turns off all unused clocks, which
needs to access subsystem registers such as VENC and VENC_LT.

Accessing MT8173 VENC registers needs two top clocks, mm_sel and
venc_sel. Accessing VENC_LT registers needs mm_sel and venclt_sel.
So we need to keep these clocks on before accessing their registers.

This patch keeps venc_sel / venclt_sel clock on when
VENC / VENC_LT's power is on, to prevent system hang up while
accessing its registeres.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-10-14 15:34:43 +02:00
James Liao
67e56c5651 arm64: dts: mt8173: Add subsystem clock controller device nodes
This patch adds device nodes providing subsystem clocks on MT8173,
includes mmsys, imgsys, vdecsys, vencsys and vencltsys.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-10-14 15:24:16 +02:00
Dan Williams
dfddb969ed iommu/vt-d: Switch from ioremap_cache to memremap
In preparation for deprecating ioremap_cache() convert its usage in
intel-iommu to memremap.  This also eliminates the mishandling of the
__iomem annotation in the implementation.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-14 15:22:06 +02:00
Jon Paul Maloy
0f8b8e28fb tipc: eliminate risk of stalled link synchronization
In commit 6e498158a8 ("tipc: move link synch and failover to link aggregation level")
we introduced a new mechanism for performing link failover and
synchronization. We have now detected a bug in this mechanism.

During link synchronization we use the arrival of any packet on
the tunnel link to trig a check for whether it has reached the
synchronization point or not. This has turned out to be too
permissive, since it may cause an arriving non-last SYNCH packet to
end the synch state, just to see the next SYNCH packet initiate a
new synch state with a new, higher synch point. This is not fatal,
but should be avoided, because it may significantly extend the
synchronization period, while at the same time we are not allowed
to send NACKs if packets are lost. In the worst case, a low-traffic
user may see its traffic stall until a LINK_PROTOCOL state message
trigs the link to leave synchronization state.

At the same time, LINK_PROTOCOL packets which happen to have a (non-
valid) sequence number lower than the tunnel link's rcv_nxt value will
be consistently dropped, and will never be able to resolve the situation
described above.

We fix this by exempting LINK_PROTOCOL packets from the sequence number
check, as they should be. We also reduce (but don't completely
eliminate) the risk of entering multiple synchronization states by only
allowing the (logically) first SYNCH packet to initiate a synchronization
state. This works independently of actual packet arrival order.

Fixes: commit 6e498158a8 ("tipc: move link synch and failover to link aggregation level")

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 06:06:40 -07:00
Ingo Molnar
e9363deeb2 perf/core improvements and fixes:
User visible:
 
 - Use the alternative with the most descriptive filename containing
   a vmlinux file for a given build-id, providing a better title line
   for tools such as 'annotate' (Arnaldo Carvalho de Melo)
 
 - Remove help messages about previous right and left arrow keybidings, that
   were repurposed for horizontal scrolling (Arnaldo Carvalho de Melo)
 
 - Inform how to reset the symbol filter in the hists browser (top & report)
   (Arnaldo Carvalho de Melo)
 
 - Add 'm' key for context menu display in the hists browser, that became
   inacessible with the repurposing of the right arrow key for horizontal
   scrolling (Namhyung Kim)
 
 - Use debug_frame for callchains if eh_frame is unusable (Rabin Vicent)
 
 Build fixes:
 
 - Fix strict-aliasing breakage with gcc 4.4 in the READ_ONCE/WRITE_ONCE code
   adopted from the kernel tree, that builds with -fno-strict-aliasing while
   tools/perf/ uses -Wstrict-aliasing=3 (Jiri Olsa)
 
 - Fix unw_word_t pointer casts in code using libunwind for callchains,
   fixing the build in at least 32-bit MIPS systems (Rabin Vicent)
 
 - Workaround cross compile build problems related to fixdep (Jiri Olsa)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWHVxVAAoJENZQFvNTUqpA3joP+wTSN+x8rvHrGTvUsUsJ6D4W
 uvw4OdM+ZU2A781xCFmuYktbXEGFOsUcKlV1cUPZRuT/crrhxa/KgxVNBMgfJHE5
 cfpuElM0CxBqf0oD9CGaVRP59JdcjfGybuL8S2I6Gon8eeSRm+DhdlIsLrx6JGYC
 lnaG6/77JK/tGEaA9bBen4LB55SuXTt3KZCC5fG/EgUfGzXvHwSNFsFIqO1CoqV2
 RoZIBiTGCPBSMxHS9WX+Ghi7TiG9V8l1QdvGvXrPp2m1XfP3MPcus+CMyCxrFM83
 qwDhel/sE6ZpH1Oc/01Qf4zrRdEvsm4ye/xCMxGLpxDmjlBsBPp6U8Pn0EpXbJ+U
 c+/L90XyloHj2AoOzQPkXnYLCekPLbpJ46aR92wbZC3yQrZ9Db6KVewd0Q5yiULR
 E4s69AQBXijzBuK8Kl/d+3Ytvvmn8iaJA/zsgL46JuQEn9Jndu6zgRj0CG/W3XI6
 jlHtkk+SSDstRJX2DXnoJOb4kB3K11aOVecF2rpX0rZLTgGKh5Caa/ZXubIA5LGY
 ze2PkAqf0zqP9XU4/p/ZYDhCu/HMu9iyFyAQXmoC8vjFpIiGXMjmBVbdAGyx/hJU
 RN04TE0x9D5JlpgPIRien8ZylLyByK9/IJm/J395rn72EY8o0NDGi3Synh+akDpm
 sOvfHfhvLcSJQxfzOnhy
 =dLXA
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Use the alternative with the most descriptive filename containing
    a vmlinux file for a given build-id, providing a better title line
    for tools such as 'annotate'. (Arnaldo Carvalho de Melo)

  - Remove help messages about previous right and left arrow keybidings, that
    were repurposed for horizontal scrolling. (Arnaldo Carvalho de Melo)

  - Inform how to reset the symbol filter in the hists browser. (top & report)
    (Arnaldo Carvalho de Melo)

  - Add 'm' key for context menu display in the hists browser, that became
    inacessible with the repurposing of the right arrow key for horizontal
    scrolling. (Namhyung Kim)

  - Use debug_frame for callchains if eh_frame is unusable. (Rabin Vicent)

Build fixes:

  - Fix strict-aliasing breakage with gcc 4.4 in the READ_ONCE/WRITE_ONCE code
    adopted from the kernel tree, that builds with -fno-strict-aliasing while
    tools/perf/ uses -Wstrict-aliasing=3. (Jiri Olsa)

  - Fix unw_word_t pointer casts in code using libunwind for callchains,
    fixing the build in at least 32-bit MIPS systems. (Rabin Vicent)

  - Work around cross compile build problems related to fixdep. (Jiri Olsa)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-14 15:06:33 +02:00
Paolo Abeni
02a6d6136f Revert "ipv4/icmp: redirect messages can use the ingress daddr as source"
Revert the commit e2ca690b65 ("ipv4/icmp: redirect messages
can use the ingress daddr as source"), which tried to introduce a more
suitable behaviour for ICMP redirect messages generated by VRRP routers.
However RFC 5798 section 8.1.1 states:

    The IPv4 source address of an ICMP redirect should be the address
    that the end-host used when making its next-hop routing decision.

while said commit used the generating packet destination
address, which do not match the above and in most cases leads to
no redirect packets to be generated.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 06:01:07 -07:00
Thiago Macieira
d1b0dc90ab Update the buildsystem for KConfig finding Qt
The buildsystem will now only search for Qt 4 and Qt 5. Support for Qt 2
and 3 was dropped in the previous commits (Qt 3 was EOL'ed in 2010 or
so...).

For Qt 5, to be future-proof with the future direction notice appearing
in the 5.5 release, C++11 support is automatically enabled.

Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 15:00:25 +02:00
Boris Barbulovski
b4ff1de3b8 Port xconfig to Qt5 - Update copyright.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 15:00:25 +02:00
Boris Barbulovski
ee7298fbc0 Port xconfig to Qt5 - Fix goParent issue.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 15:00:25 +02:00
Boris Barbulovski
5df9da9df2 Port xconfig to Qt5 - on Back clicked, deselect old item.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 15:00:25 +02:00
Boris Barbulovski
76d53cbbae Port xconfig to Qt5 - Add(back) one click checkbox toggle.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:04 +02:00
Boris Barbulovski
e336b9f132 Port xconfig to Qt5 - Add(back) lineedit editing.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:04 +02:00
Boris Barbulovski
5c60014b4e Port xconfig to Qt5 - Remove some commented code.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:04 +02:00
Boris Barbulovski
b3c48f964c Port xconfig to Qt5 - Source format.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
f999cc06f9 Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
d960b98899 Port xconfig to Qt5 - Change ConfigItem constructor parent type.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
a5225e9bc9 Port xconfig to Qt5 - Disable ConfigList soring
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
5c6f1554ba Port xconfig to Qt5 - Remove ConfigList::updateMenuList template.
ConfigItem executes parent->takeChild(0)

while

ConfigList executes parent->takeTopLevelItem(0)

Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
dbf629331a Port xconfig to Qt5 - Add ConfigList::mode to initializer list.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
86c052827b Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
a52cb321de Port xconfig to Qt5 - Tree widget set column titles.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
e484fe3a9b Port xconfig to Qt5 - Quick workaround to bypass app crash at startup.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:03 +02:00
Boris Barbulovski
9bd36ed363 Port xconfig to Qt5 - Set ConfigView object name.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
c14fa5e123 Port xconfig to Qt5 - Use correct signal names.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
9bfda0ab03 Port xconfig to Qt5 - Remove Qt3Support from Makefile.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
d5d973c3f8 Port xconfig to Qt5 - Put back some of the old implementation(part 2).
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
59e564408f Port xconfig to Qt5 - Put back some of the old implementation.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
1019f1a586 Port xconfig to Qt5 - Introduce Qt4/5 version of ConfigList and ConfigItem
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
92119937e8 Port xconfig to Qt5 - update signals
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
68ccb7ef49 Port xconfig to Qt5 - Fix the code so it compiles with Qt5
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
76538660fb Port xconfig to Qt5 - Remove custom ListView classes.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:02 +02:00
Boris Barbulovski
780505e33f Port xconfig to Qt5 - Make single/split/full actions checkable.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
9c86235a19 Port xconfig to Qt5 - Update QAction checkable
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
92298b496d Port xconfig to Qt5 - Fix layout margin.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
29a70168e2 Port xconfig to Qt5 - Fix layout
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
34d6320b82 Port xconfig to Qt5 - Replace Q3VBox with QWidget
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
1ce67353a7 Port xconfig to Qt5 - Remove unused #include <q3dragobject.h>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
76bede8708 Port xconfig to Qt5 - Use QMenu
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
924bbb53d5 Port xconfig to Qt5 - Use QTextBrowser
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
041fbdc21f Port xconfig to Qt5 - Use QList
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:01 +02:00
Boris Barbulovski
bea00771f7 Port xconfig to Qt5 - Use QFileDialog
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:00 +02:00
Boris Barbulovski
85eaf28a26 Port xconfig to Qt5 - Use QAction
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:00 +02:00
Boris Barbulovski
b1f8a45bfe Port xconfig to Qt5 - Use QMainWindow, QToolBar
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:00 +02:00
Boris Barbulovski
8328447af8 Remove support for QT3 and older.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-10-14 14:59:00 +02:00
David S. Miller
7d1f6411b0 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-10-13

This series contains updates to i40e, i40evf, ixgbe and fm10k.

Carolyn cleans up ndo_bridge_getlink() by flagging a parameter as
__always_unused, since it is never used.  Adds a member to the nvm_info
struct to store OEM version info to be output either by OID or ethtool.

Neerav cleans up a remaining bit shift to use BIT() macro.

Mitch fixes the i40evf driver to properly handle calls to its
ndo_set_mac_address() method.  It did not properly check to see if the
override would be allowed by the PF driver, and it never removed the old
address from its filter list.  Cleaned up the use of
i40e_enable_vf_mappings() in i40e_alloc_vfs(), since it is just redundant
since we already call it by i40e_reset_vf().  Fixed a possible panic
in some circumstances where the firmware may fail to allocate a VSI for
a VF by checking the return value from i40e_alloc_vf_res() and don't
try to configure the device further if it failed.

Greg fixes the parsing of CEE App TLVs so the caller does not have to
consider whether the App came from a CEE or IEEE DCBx negotiation.

Shannon moves the device ids into a standalone file due to the desire
to write user-land drivers (and other requests) without needing the rest
of the include files.

Catherine adds the ability to save the module information from
get_phy_capabilities() to be used to determine which speeds the module
supports.  Also cleaned up the PHY structure by removing unused members
and add the ability to store the PHY capabilities reported by the
firmware.

Emil modifies ixgbe to ensure that flow control packets initiated by the
VF are dropped and reported as spoofed.

Jacob cleans up the fm10k driver to avoid buffer overflow by using
sprintf(), so convert to using snprintf().  Also fixed the use of an
enum as a boolean, so check for the actual value of NETREG_UNINITIALIZED
in case it ever changes from the current value of zero.

v2: Dropped patch 11 of the original series, which added functions that
    were never used.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14 05:53:48 -07:00
Will Deacon
eb93ce2cb7 arm64: compat: wire up new syscalls
Commit 208473c1f3 ("ARM: wire up new syscalls") hooked up the new
userfaultfd and membarrier syscalls for ARM, so do the same for our
compat syscall table in arm64.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-14 13:51:41 +01:00
Tirumalesh Chalamarla
668b4ada1c iommu/arm-smmu: ThunderX mis-extends 64bit registers
The SMMU architecture defines two different behaviors when 64-bit
registers are written with 32-bit writes.  The first behavior causes
zero extension into the upper 32-bits.  The second behavior splits a
64-bit register into "normal" 32-bit register pairs.

On some buggy implementations, registers incorrectly zero extended
when they should instead behave as normal 32-bit register pairs.

Signed-off-by: Tirumalesh Chalamarla <tchalamarla@caviumnetworks.com>
[will: removed redundant macro parameters]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-14 13:43:51 +01:00
Fabio Estevam
077124c98d iommu/arm-smmu: Remove unneeded '0x' annotation
'%pad' automatically prints with '0x', so remove the explicit '0x'
annotation.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-14 13:43:50 +01:00
Will Deacon
941a802d93 iommu/arm-smmu: Use drvdata instead of maintaining smmu_devices list
Rather than keep a private list of struct arm_smmu_device and searching
this whenever we need to look up the correct SMMU instance, instead use
the drvdata field in the struct device to take care of the mapping for
us.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-14 13:43:50 +01:00
Suman Anna
3ca9299e7d iommu/omap: Add support for configuring dsp iommus on DRA7xx
The DSP MMUs on DRA7xx SoC requires configuring an additional
MMU_CONFIG register present in the DSP_SYSTEM sub module. This
setting dictates whether the DSP Core's MDMA and EDMA traffic
is routed through the respective MMU or not. Add the support
to the OMAP iommu driver so that the traffic is not bypassed
when enabling the MMUs.

The MMU_CONFIG register has two different bits for enabling
each of these two MMUs present in the DSP processor sub-system
on DRA7xx. An id field is added to the OMAP iommu object to
identify and enable each IOMMU. The id information and the
DSP_SYSTEM.MMU_CONFIG register programming is achieved through
the processing of the optional "ti,syscon-mmuconfig" property.
A proper value is assigned to the id field only when this
property is present.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-14 14:35:47 +02:00