[ Upstream commit 2356f15cae ]
On XenServer on Windows machine a platform device with ID 2 instead of
1 is used.
This device is mainly identical to device 1 but due to some Windows
update behaviour it was decided to use a device with a different ID.
This causes compatibility issues with Linux which expects, if Xen
is detected, to find a Xen platform device (5853:0001) otherwise code
will crash due to some missing initialization (specifically grant
tables). Specifically from dmesg
RIP: 0010:gnttab_expand+0x29/0x210
Code: 90 0f 1f 44 00 00 55 31 d2 48 89 e5 41 57 41 56 41 55 41 89 fd
41 54 53 48 83 ec 10 48 8b 05 7e 9a 49 02 44 8b 35 a7 9a 49 02
<8b> 48 04 8d 44 39 ff f7 f1 45 8d 24 06 89 c3 e8 43 fe ff ff
44 39
RSP: 0000:ffffba34c01fbc88 EFLAGS: 00010086
...
The device 2 is presented by Xapi adding device specification to
Qemu command line.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250227145016.25350-1-frediano.ziglio@cloud.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc6c67ec2 ]
When using smc_pnet in SMC, it will only search the pnetid in the
base_ndev of the netdev hierarchy(both HW PNETID and User-defined
sw pnetid). This may not work for some scenarios when using SMC in
container on cloud environment.
In container, there have choices of different container network,
such as directly using host network, virtual network IPVLAN, veth,
etc. Different choices of container network have different netdev
hierarchy. Examples of netdev hierarchy show below. (eth0 and eth1
in host below is the netdev directly related to the physical device).
_______________________________
| _________________ |
| |POD | |
| | | |
| | eth0_________ | |
| |____| |__| |
| | | |
| | | |
| eth1|base_ndev| eth0_______ |
| | | | RDMA ||
| host |_________| |_______||
---------------------------------
netdev hierarchy if directly using host network
________________________________
| _________________ |
| |POD __________ | |
| | |upper_ndev| | |
| |eth0|__________| | |
| |_______|_________| |
| |lower netdev |
| __|______ |
| eth1| | eth0_______ |
| |base_ndev| | RDMA ||
| host |_________| |_______||
---------------------------------
netdev hierarchy if using IPVLAN
_______________________________
| _____________________ |
| |POD _________ | |
| | |base_ndev|| |
| |eth0(veth)|_________|| |
| |____________|________| |
| |pairs |
| _______|_ |
| | | eth0_______ |
| veth|base_ndev| | RDMA ||
| |_________| |_______||
| _________ |
| eth1|base_ndev| |
| host |_________| |
---------------------------------
netdev hierarchy if using veth
Due to some reasons, the eth1 in host is not RDMA attached netdevice,
pnetid is needed to map the eth1(in host) with RDMA device so that POD
can do SMC-R. Because the eth1(in host) is managed by CNI plugin(such
as Terway, network management plugin in container environment), and in
cloud environment the eth(in host) can dynamically be inserted by CNI
when POD create and dynamically be removed by CNI when POD destroy and
no POD related to the eth(in host) anymore. It is hard to config the
pnetid to the eth1(in host). But it is easy to config the pnetid to the
netdevice which can be seen in POD. When do SMC-R, both the container
directly using host network and the container using veth network can
successfully match the RDMA device, because the configured pnetid netdev
is a base_ndev. But the container using IPVLAN can not successfully
match the RDMA device and 0x03030000 fallback happens, because the
configured pnetid netdev is not a base_ndev. Additionally, if config
pnetid to the eth1(in host) also can not work for matching RDMA device
when using veth network and doing SMC-R in POD.
To resolve the problems list above, this patch extends to search user
-defined sw pnetid in the clc handshake ndev when no pnetid can be found
in the base_ndev, and the base_ndev take precedence over ndev for backward
compatibility. This patch also can unify the pnetid setup of different
network choices list above in container(Config user-defined sw pnetid in
the netdevice can be seen in POD).
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fc728515 ]
The devices with size >= 2^63 bytes can't be used reliably by userspace
because the type off_t is a signed 64-bit integer.
Therefore, we limit the maximum size of a device mapper device to
2^63-512 bytes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64b7871522 ]
This patch addresses an issue where authentication failures were being
erroneously reported due to negative test failures in the "ccm(aes)"
selftest.
pr_debug suppress unnecessary screaming of these tests.
Signed-off-by: Shashank Gupta <shashankg@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 226ac19c21 ]
When conf_read_simple() is called with S_DEF_AUTO, it is meant to read
previous symbol values from include/config/auto.conf to determine which
include/config/* files should be touched.
This process should not modify the current symbol status in any way.
However, conf_touch_deps() currently invalidates all symbol values and
recalculates them, which is totally unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f757f6011c ]
The script previously assumed --file was always the first argument,
which caused issues when it appeared later. This patch updates the
parsing logic to scan all arguments to find --file, sets the config
file correctly, and resets the argument list with the remaining
commands.
It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN
to make oldconfig.
Signed-off-by: Seyediman Seyedarab <imandevel@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b82b181a2 ]
Currently for bpf progs in a cgroup hierarchy, the effective prog array
is computed from bottom cgroup to upper cgroups (post-ordering). For
example, the following cgroup hierarchy
root cgroup: p1, p2
subcgroup: p3, p4
have BPF_F_ALLOW_MULTI for both cgroup levels.
The effective cgroup array ordering looks like
p3 p4 p1 p2
and at run time, progs will execute based on that order.
But in some cases, it is desirable to have root prog executes earlier than
children progs (pre-ordering). For example,
- prog p1 intends to collect original pkt dest addresses.
- prog p3 will modify original pkt dest addresses to a proxy address for
security reason.
The end result is that prog p1 gets proxy address which is not what it
wants. Putting p1 to every child cgroup is not desirable either as it
will duplicate itself in many child cgroups. And this is exactly a use case
we are encountering in Meta.
To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag
is specified at attachment time, the prog has higher priority and the
ordering with that flag will be from top to bottom (pre-ordering).
For example, in the above example,
root cgroup: p1, p2
subcgroup: p3, p4
Let us say p2 and p4 are marked with BPF_F_PREORDER. The final
effective array ordering will be
p2 p4 p3 p1
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0116a7d84b ]
Add a stub for mt6359_accdet_enable_jack_detect() to prevent linker
failures in the machine sound drivers calling it when
CONFIG_SND_SOC_MT6359_ACCDET is not enabled.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-3-7828e835ff4b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17fdf318f5 ]
The current code for the IRQ in pcm6240 makes no sense:
it looks up an IRQ with of_irq_get(), treat it as a GPIO
by issuing gpio_request(), gpio_direction_input()
and gpio_to_irq() on it.
This is just wrong, if the device tree assigns the IRQ
from a GPIO number this is just incorrect: it is clearly
stated that GPIO providers and IRQ providers are
orthogonal.
It is possible to look up an IRQ to a corresponding GPIO
line but this is taking an IRQ and pretending it's a
GPIO, which is just semantically wrong.
Drop the offending code and treat the IRQ that we get
from the device tree as any other IRQ, see for example
other codec drivers.
The DT bindings for this codec does not have any in-tree
DTS files, which may explain why things are weird.
As a bonus, this moves the driver away from the legacy
<linux/gpio.h> include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-3-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a5fc30841 ]
The return value of spi_setup() is not captured within
spi_mux_select() and it is assumed to be always success.
CID: 1638374
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Link: https://patch.msgid.link/20250316054651.13242-1-sperezglz@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe1e57d44d ]
- Rename erofs_init_managed_cache() to z_erofs_init_super();
- Move the initialization of managed_pslots into z_erofs_init_super() too;
- Move z_erofs_init_super() and packed inode preparation upwards, before
the root inode initialization.
Therefore, the root directory can also be compressible.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250317054840.3483000-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad79c278e4 ]
This is only used to write a new NVM in order to upgrade the retimer
firmware. It does not make sense to expose it if upgrade is disabled.
This also makes it consistent with the router NVM upgrade.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 149dfb3161 ]
- Move tcp_count_delivered() earlier and split tcp_count_delivered_ce()
out of it
- Move tcp_in_ack_event() later
- While at it, remove the inline from tcp_in_ack_event() and let
the compiler to decide
Accurate ECN's heuristics does not know if there is going
to be ACE field based CE counter increase or not until after
rtx queue has been processed. Only then the number of ACKed
bytes/pkts is available. As CE or not affects presence of
FLAG_ECE, that information for tcp_in_ack_event is not yet
available in the old location of the call to tcp_in_ack_event().
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a662f3c03b ]
If a journal is wiped, we will set journal->j_tail to 0. However if
'write' argument is not set (as it happens for read-only device or for
ocfs2), the on-disk superblock is not updated accordingly and thus
jbd2_journal_recover() cat try to recover the wiped journal. Fix the
check in jbd2_journal_recover() to use journal->j_tail for checking
empty journal instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250206094657.20865-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f4a489b37 ]
The msg_res region translates writes into PCIe Message TLPs. Previously we
mapped this region using atu.cpu_addr, the input address programmed into
the ATU.
"cpu_addr" is a misnomer because when a bus fabric translates addresses
between the CPU and the ATU, the ATU input address is different from the
CPU address. A future patch will rename "cpu_addr" and correct the value
to be the ATU input address instead of the CPU physical address.
Map the msg_res region before writing to it using the msg_res resource
start, a CPU physical address.
Link: https://lore.kernel.org/r/20250315201548.858189-2-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 860be250fc ]
Some systems report INTx as not routed by setting pdev->irq to
IRQ_NOTCONNECTED, resulting in a -ENOTCONN error when trying to
setup eventfd signaling. Include this in the set of conditions
for which the PIN register is virtualized to zero.
Additionally consolidate vfio_pci_get_irq_count() to use this
virtualized value in reporting INTx support via ioctl and sanity
checking ioctl paths since pdev->irq is re-used when the device
is in MSI mode.
The combination of these results in both the config space of the
device and the ioctl interface behaving as if the device does not
support INTx.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250311230623.1264283-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad77cebf97 ]
The SCSI ERASE command erases from the current position onwards. Don't
clear the position variables.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-3-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8db816c6f1 ]
In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did
not correctly implement it. The st driver first tries MODE SELECT with the
page format bit set to set the block descriptor. If not successful, the
non-page format is tried.
The test only tests the sense code and this triggers also from illegal
parameter in the parameter list. The test is limited to "old" devices and
made more strict to remove false alarms.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-4-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b419c889c ]
capable() calls refer to enabled LSMs whether to permit or deny the
request. This is relevant in connection with SELinux, where a
capability check results in a policy decision and by default a denial
message on insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an
unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore
those denial messages, hiding future syscalls, where the task
performs an actual privileged operation, leading to hidden limited
functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to permit
the task the requested capability, while it does not need it,
violating the principle of least privilege.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250302160657.127253-2-cgoettsche@seltendoof.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9be2b9b60 ]
This is required to allow the IOMMU driver to correctly flush its own
TLB.
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20250113142424.30487-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c81e32ae ]
Newer FW can set the CAPS_CHANGE flag during ifup if some capabilities
or configurations have changed. For example, the CoS queue
configurations may have changed. Support this new flag by treating it
almost like FW reset. The driver will essentially rediscover all
features and capabilities, reconfigure all backing store context memory,
reset everything to default, and reserve all resources.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: shantiprasad shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-5-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fcfcbe457 ]
This patch addresses an issue where, despite the AP supporting 40MHz
bandwidth, the connection was limited to 20MHz. Without this fix,
even if the access point supports 40MHz, the bandwidth after
connection remains at 20MHz. This issue is not a regression.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250314094238.2097341-1-jeff.chen_1@nxp.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e82cf3051e ]
When uml_reserved is updated, min_low_pfn must also be updated
accordingly. Otherwise, min_low_pfn will not accurately reflect
the lowest available PFN.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250221041855.1156109-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cef721e0d5 ]
Doing this allows using registers as retrieved from an mcontext to be
pushed to a process using PTRACE_SETREGS.
It is not entirely clear to me why CSGSFS was masked. Doing so creates
issues when using the mcontext as process state in seccomp and simply
copying the register appears to work perfectly fine for ptrace.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://patch.msgid.link/20250224181827.647129-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03d2b62208 ]
This patch bypasses multi-link errors in TCP mode, allowing dlm
to operate on the first tcp link.
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9291ea091b ]
An mm has pgstes only after s390_enable_sie() has been called, while
mm_alloc_pgste() may be always true (e.g. via sysctl setting).
Limit the calls to gmap_unlink() in pte_free_tlb() to those cases
where there might be something to unlink.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0430bf9bc1 ]
The controller driver nacked the master request but didn't emit a
STOP to end the transaction. The driver shall refuse the unsupported
requests and return the controller state to IDLE by emitting a STOP.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250318053606.3087121-4-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00e5c2238 ]
Move to probe so we can check the PCI device type and
only apply the drm_firmware_drivers_only() check for
PCI DISPLAY classes. Also add a module parameter to
override the nomodeset kernel parameter as a workaround
for platforms that have this hardcoded on their kernel
command lines.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c2f4ae64b ]
[WHY]
We should never apply a minimum dispclk value while in
prepare_bandwidth or while displays are active. This is
always an optimizaiton for when all displays are disabled.
[HOW]
Defer dispclk optimization until safe_to_lower = true
and display_count reaches 0.
Since 0 has a special value in this logic (ie. no dispclk
required) we also need adjust the logic that clamps it for
the actual request to PMFW.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Eric Yang <eric.yang@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1a0202c6b ]
This patch improve the returned error code of blkcg_policy_register().
1. Move the validation check for cpd/pd_alloc_fn and cpd/pd_free_fn
function pairs to the start of blkcg_policy_register(). This ensures
we immediately return -EINVAL if the function pairs are not correctly
provided, rather than returning -ENOSPC after locking and unlocking
mutexes unnecessarily.
Those locks should not contention any problems, as error of policy
registration is a super cold path.
2. Return -ENOMEM when cpd_alloc_fn() failed.
Co-authored-by: Wen Tao <wentao@uniontech.com>
Signed-off-by: Wen Tao <wentao@uniontech.com>
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/3E333A73B6B6DFC0+20250317022924.150907-1-chenlinxuan@uniontech.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a77749b3e2 ]
When attempting to build a too long path we are currently returning
-ENOMEM, which is very odd and misleading. So update fs_path_ensure_buf()
to return -ENAMETOOLONG instead. Also, while at it, move the WARN_ON()
into the if statement's expression, as it makes it clear what is being
tested and also has the effect of adding 'unlikely' to the statement,
which allows the compiler to generate better code as this condition is
never expected to happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1283b8c125 ]
At btrfs_reclaim_bgs_work(), we are grabbing a block group's zone unusable
bytes while not under the protection of the block group's spinlock, so
this can trigger race reports from KCSAN (or similar tools) since that
field is typically updated while holding the lock, such as at
__btrfs_add_free_space_zoned() for example.
Fix this by grabbing the zone unusable bytes while we are still in the
critical section holding the block group's spinlock, which is right above
where we are currently grabbing it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cda76788f8 ]
At close_ctree() after we have ran delayed iputs either explicitly through
calling btrfs_run_delayed_iputs() or later during the call to
btrfs_commit_super() or btrfs_error_commit_super(), we assert that the
delayed iputs list is empty.
We have (another) race where this assertion might fail because we have
queued an async write into the fs_info->workers workqueue. Here's how it
happens:
1) We are submitting a data bio for an inode that is not the data
relocation inode, so we call btrfs_wq_submit_bio();
2) btrfs_wq_submit_bio() submits a work for the fs_info->workers queue
that will run run_one_async_done();
3) We enter close_ctree(), flush several work queues except
fs_info->workers, explicitly run delayed iputs with a call to
btrfs_run_delayed_iputs() and then again shortly after by calling
btrfs_commit_super() or btrfs_error_commit_super(), which also run
delayed iputs;
4) run_one_async_done() is executed in the work queue, and because there
was an IO error (bio->bi_status is not 0) it calls btrfs_bio_end_io(),
which drops the final reference on the associated ordered extent by
calling btrfs_put_ordered_extent() - and that adds a delayed iput for
the inode;
5) At close_ctree() we find that after stopping the cleaner and
transaction kthreads the delayed iputs list is not empty, failing the
following assertion:
ASSERT(list_empty(&fs_info->delayed_iputs));
Fix this by flushing the fs_info->workers workqueue before running delayed
iputs at close_ctree().
David reported this when running generic/648, which exercises IO error
paths by using the DM error table.
Reported-by: David Sterba <dsterba@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df94a342ef ]
[BUG]
Even after all the error fixes related the
"ASSERT(list_empty(&fs_info->delayed_iputs));" in close_ctree(), I can
still hit it reliably with my experimental 2K block size.
[CAUSE]
In my case, all the error is triggered after the fs is already in error
status.
I find the following call trace to be the cause of race:
Main thread | endio_write_workers
---------------------------------------------+---------------------------
close_ctree() |
|- btrfs_error_commit_super() |
| |- btrfs_cleanup_transaction() |
| | |- btrfs_destroy_all_ordered_extents() |
| | |- btrfs_wait_ordered_roots() |
| |- btrfs_run_delayed_iputs() |
| | btrfs_finish_ordered_io()
| | |- btrfs_put_ordered_extent()
| | |- btrfs_add_delayed_iput()
|- ASSERT(list_empty(delayed_iputs)) |
!!! Triggered !!!
The root cause is that, btrfs_wait_ordered_roots() only wait for
ordered extents to finish their IOs, not to wait for them to finish and
removed.
[FIX]
Since btrfs_error_commit_super() will flush and wait for all ordered
extents, it should be executed early, before we start flushing the
workqueues.
And since btrfs_error_commit_super() now runs early, there is no need to
run btrfs_run_delayed_iputs() inside it, so just remove the
btrfs_run_delayed_iputs() call from btrfs_error_commit_super().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef3cbf17d ]
The inline function btrfs_is_testing() is hardcoded to return 0 if
CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set. Currently we're relying on
the compiler optimizing out the call to alloc_test_extent_buffer() in
btrfs_find_create_tree_block(), as it's not been defined (it's behind an
#ifdef).
Add a stub version of alloc_test_extent_buffer() to avoid linker errors
on non-standard optimization levels. This problem was seen on GCC 14
with -O0 and is helps to see symbols that would be otherwise optimized
out.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 895c6721d3 ]
Currently, the async discard machinery owns a ref to the block_group
when the block_group is queued on a discard list. However, to handle
races with discard cancellation and the discard workfn, we have a
specific logic to detect that the block_group is *currently* running in
the workfn, to protect the workfn's usage amidst cancellation.
As far as I can tell, this doesn't have any overt bugs (though
finish_discard_pass() and remove_from_discard_list() racing can have a
surprising outcome for the caller of remove_from_discard_list() in that
it is again added at the end).
But it is needlessly complicated to rely on locking and the nullity of
discard_ctl->block_group. Simplify this significantly by just taking a
refcount while we are in the workfn and unconditionally drop it in both
the remove and workfn paths, regardless of if they race.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be7113d2e2 ]
If the clock i2c->clk was not enabled in i2c_pxa_probe(), it should not be
disabled in any path.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250212172803.1422136-1-mordan@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4f35233a6 ]
When the I2C QUP controller is used together with a DMA engine it needs
to vote for the interconnect path to the DRAM. Otherwise it may be
unable to access the memory quickly enough.
The requested peak bandwidth is dependent on the I2C core clock.
To avoid sending votes too often the bandwidth is always requested when
a DMA transfer starts, but dropped only on runtime suspend. Runtime
suspend should only happen if no transfer is active. After resumption we
can defer the next vote until the first DMA transfer actually happens.
The implementation is largely identical to the one introduced for
spi-qup in commit ecdaa94730 ("spi: qup: Vote for interconnect
bandwidth to DRAM") since both drivers represent the same hardware
block.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20231128-i2c-qup-dvfs-v1-3-59a0e3039111@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 631ca8909f ]
At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of
contiguous free memory available at this point, the kernel will crash
and burn because memblock_phys_alloc_range() returns 0 on failure,
which leads memblock_phys_free() to throw the first 4 MiB of physical
memory to the wolves.
At a minimum it should fail gracefully with a meaningful diagnostic,
but in fact everything seems to work fine without the weird reserve
allocation.
Signed-off-by: Philip Redkin <me@rarity.fan>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/94b3e98f-96a7-3560-1f76-349eb95ccf7f@rarity.fan
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e6b0a2e41 ]
The Family model check to read the processor flag MSR is misleading and
potentially incorrect. It doesn't consider Family while comparing the
model number. The original check did have a Family number but it got
lost/moved during refactoring.
intel_collect_cpu_info() is called through multiple paths such as early
initialization, CPU hotplug as well as IFS image load. Some of these
flows would be error prone due to the ambiguous check.
Correct the processor flag scan check to use a Family number and update
it to a VFM based one to make it more readable.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-4-sohil.mehta@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a2ad75274 ]
Some old crusty CPUs need an extra delay that slows down booting. See
the comment above 'init_udelay' for details. Newer CPUs don't need the
delay.
Right now, for Intel, Family 6 and only Family 6 skips the delay. That
leaves out both the Family 15 (Pentium 4s) and brand new Family 18/19
models.
The omission of Family 15 (Pentium 4s) seems like an oversight and 18/19
do not need the delay.
Skip the delay on all Intel processors Family 6 and beyond.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250219184133.816753-11-sohil.mehta@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91d5451d97 ]
The __ref_stack_chk_guard symbol doesn't exist on UP:
<stdin>:4:15: error: ‘__ref_stack_chk_guard’ undeclared here (not in a function)
Fix the #ifdef around the entry.S export.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250123190747.745588-8-brgerst@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a141be323 ]
__ASSEMBLY__ is only defined by the Makefile of the kernel, so
this is not really useful for UAPI headers (unless the userspace
Makefile defines it, too). Let's switch to __ASSEMBLER__ which
gets set automatically by the compiler when compiling assembly
code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Brian Gerst <brgerst@gmail.com>
Link: https://lore.kernel.org/r/20250310104256.123527-1-thuth@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d5630b0c9 ]
The mt7925 sometimes fails to enter low power mode during suspend.
This is caused by the chip firmware sending an additional ACK event
to the host after processing the suspend command. Due to timing issues,
this event may not reach the host, causing the chip to get stuck.
To resolve this, the ACK flag in the suspend command is removed,
as it is not needed in the MT7925 architecture. This prevents the
firmware from sending the additional ACK event, ensuring the device
can reliably enter low power mode during suspend.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Link: https://patch.msgid.link/d056938144a3a0336c3a4e3cec6f271899f32bf7.1736775666.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
