commit 07b93a5704 upstream.
[WHY]
Although unlikely drm_atomic_get_new_connector_state() or
drm_atomic_get_old_connector_state() can return NULL.
[HOW]
Check returns before dereference.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e5e8d672f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79e25cd06e upstream.
Take into account the limits from the vbios. Ported
from the SMU13 code.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4352
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 203cc7f1dd86f2c8de5c3c6182f19adac7c9c206)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 916b7f42b3 upstream.
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alistair Delva <adelva@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dff6f36878 upstream.
Add the missing write_blocked check for updating sysfs related to uncore
efficiency latency control (ELC). If write operation is blocked return
error.
Fixes: bb516dc79c ("platform/x86/intel-uncore-freq: Add support for efficiency latency control")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250727210513.2898630-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 430fa71027 upstream.
Tracing code called by the SCLP interrupt handler contains early exits
if the SCCB address associated with an interrupt is NULL. This check is
performed after physical to virtual address translation.
If the kernel identity mapping does not start at address zero, the
resulting virtual address is never zero, so that the NULL checks won't
work. Subsequently this may result in incorrect accesses to the first
page of the identity mapping.
Fix this by introducing a function that handles the NULL case before
address translation.
Fixes: ada1da31ce ("s390/sclp: sort out physical vs virtual pointers usage")
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c3e9a9f29 upstream.
When skb packets are sent out, these skb packets still depends on
the rxe resources, for example, QP, sk, when these packets are
destroyed.
If these rxe resources are released when the skb packets are destroyed,
the call traces will appear.
To avoid skb packets hang too long time in some network devices,
a timestamp is added when these skb packets are created. If these
skb packets hang too long time in network devices, these network
devices can free these skb packets to release rxe resources.
Reported-by: syzbot+8425ccfb599521edb153@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8425ccfb599521edb153
Tested-by: syzbot+8425ccfb599521edb153@syzkaller.appspotmail.com
Fixes: 1a633bdc8f ("RDMA/rxe: Let destroy qp succeed with stuck packet")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20250726013104.463570-1-yanjun.zhu@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eafae0fdd1 upstream.
The HP EliteBook x360 830 G6 and HP EliteBook 830 G6 have
Realtek HDA codec ALC215. It needs the ALC285_FIXUP_HP_GPIO_LED
quirk to enable the mute LED.
Cc: <stable@vger.kernel.org>
Signed-off-by: Evgeniy Harchenko <evgeniyharchenko.dev@gmail.com>
Link: https://patch.msgid.link/20250815095814.75845-1-evgeniyharchenko.dev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e6053fea3 upstream.
When memory_failure() is called for a already hwpoisoned pfn,
kill_accessing_process() will be called to kill current task. However, if
the vma of the accessing vaddr is VM_PFNMAP, walk_page_range() will skip
the vma in walk_page_test() and return 0.
Before commit aaf99ac2ce ("mm/hwpoison: do not send SIGBUS to processes
with recovered clean pages"), kill_accessing_process() will return EFAULT.
For x86, the current task will be killed in kill_me_maybe().
However, after this commit, kill_accessing_process() simplies return 0,
that means UCE is handled properly, but it doesn't actually. In such
case, the user task will trigger UCE infinitely.
To fix it, add .test_walk callback for hwpoison_walk_ops to scan all vmas.
Link: https://lkml.kernel.org/r/20250815073209.1984582-1-tujinjiang@huawei.com
Fixes: aaf99ac2ce ("mm/hwpoison: do not send SIGBUS to processes with recovered clean pages")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dde30854bd upstream.
The mm/debug_vm_pagetable test allocates manually page table entries for
the tests it runs, using also its manually allocated mm_struct. That in
itself is ok, but when it exits, at destroy_args() it fails to clear those
entries with the *_clear functions.
The problem is that leaves stale entries. If another process allocates an
mm_struct with a pgd at the same address, it may end up running into the
stale entry. This is happening in practice on a debug kernel with
CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra
debugging I added (it prints a warning trace if pgtables_bytes goes
negative, in addition to the warning at check_mm() function):
[ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000
[ 2.539366] kmem_cache info
[ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508
[ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e
(...)
[ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0
[ 2.552816] Modules linked in:
[ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY
[ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries
[ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90
[ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug)
[ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a
[ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0
[ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001
[ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff
[ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000
[ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb
[ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0
[ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000
[ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001
[ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760
[ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0
[ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0
[ 2.553199] Call Trace:
[ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable)
[ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0
[ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570
[ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650
[ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290
[ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0
[ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870
[ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150
[ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50
[ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0
[ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
(...)
[ 2.558892] ---[ end trace 0000000000000000 ]---
[ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1
[ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144
Here the modprobe process ended up with an allocated mm_struct from the
mm_struct slab that was used before by the debug_vm_pgtable test. That is
not a problem, since the mm_struct is initialized again etc., however, if
it ends up using the same pgd table, it bumps into the old stale entry
when clearing/freeing the page table entries, so it tries to free an entry
already gone (that one which was allocated by the debug_vm_pgtable test),
which also explains the negative pgtables_bytes since it's accounting for
not allocated entries in the current process.
As far as I looked pgd_{alloc,free} etc. does not clear entries, and
clearing of the entries is explicitly done in the free_pgtables->
free_pgd_range->free_p4d_range->free_pud_range->free_pmd_range->
free_pte_range path. However, the debug_vm_pgtable test does not call
free_pgtables, since it allocates mm_struct and entries manually for its
test and eg. not goes through page faults. So it also should clear
manually the entries before exit at destroy_args().
This problem was noticed on a reboot X number of times test being done on
a powerpc host, with a debug kernel with CONFIG_DEBUG_VM_PGTABLE enabled.
Depends on the system, but on a 100 times reboot loop the problem could
manifest once or twice, if a process ends up getting the right mm->pgd
entry with the stale entries used by mm/debug_vm_pagetable. After using
this patch, I couldn't reproduce/experience the problems anymore. I was
able to reproduce the problem as well on latest upstream kernel (6.16).
I also modified destroy_args() to use mmput() instead of mmdrop(), there
is no reason to hold mm_users reference and not release the mm_struct
entirely, and in the output above with my debugging prints I already had
patched it to use mmput, it did not fix the problem, but helped in the
debugging as well.
Link: https://lkml.kernel.org/r/20250731214051.4115182-1-herton@redhat.com
Fixes: 3c9b84f044 ("mm/debug_vm_pgtable: introduce struct pgtable_debug_args")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b64700d41b upstream.
If sb_min_blocksize returns 0, squashfs_fill_super exits without freeing
allocated memory (sb->s_fs_info).
Fix this by moving the call to sb_min_blocksize to before memory is
allocated.
Link: https://lkml.kernel.org/r/20250811223740.110392-1-phillip@squashfs.org.uk
Fixes: 734aa85390 ("Squashfs: check return result of sb_min_blocksize")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: Scott GUO <scottzhguo@tencent.com>
Closes: https://lore.kernel.org/all/20250811061921.3807353-1-scott_gzh@163.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76d2e3890f upstream.
After nfs_lock_and_join_requests() tests for whether the request is
still attached to the mapping, nothing prevents a call to
nfs_inode_remove_request() from succeeding until we actually lock the
page group.
The reason is that whoever called nfs_inode_remove_request() doesn't
necessarily have a lock on the page group head.
So in order to avoid races, let's take the page group lock earlier in
nfs_lock_and_join_requests(), and hold it across the removal of the
request in nfs_inode_remove_request().
Reported-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Joe Quanaim <jdq@meta.com>
Tested-by: Andrew Steffen <aksteffen@meta.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: bd37d6fce1 ("NFSv4: Convert nfs_lock_and_join_requests() to use nfs_page_find_head_request()")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 340be332e4 upstream.
Due to a flaw in the hardware design, the GL9763e replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9763e
PCI config. Therefore, the replay timer timeout must be masked.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e5 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-4-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99d7ab8db9 upstream.
The existing memstick core patch: commit 62c59a8786 ("memstick: Skip
allocating card when removing host") sets host->removing in
memstick_remove_host(),but still exists a critical time window where
memstick_check can run after host->eject is set but before removing is set.
In the rtsx_usb_ms driver, the problematic sequence is:
rtsx_usb_ms_drv_remove: memstick_check:
host->eject = true
cancel_work_sync(handle_req) if(!host->removing)
... memstick_alloc_card()
memstick_set_rw_addr()
memstick_new_req()
rtsx_usb_ms_request()
if(!host->eject)
skip schedule_work
wait_for_completion()
memstick_remove_host: [blocks indefinitely]
host->removing = true
flush_workqueue()
[block]
1. rtsx_usb_ms_drv_remove sets host->eject = true
2. cancel_work_sync(&host->handle_req) runs
3. memstick_check work may be executed here <-- danger window
4. memstick_remove_host sets removing = 1
During this window (step 3), memstick_check calls memstick_alloc_card,
which may indefinitely waiting for mrq_complete completion that will
never occur because rtsx_usb_ms_request sees eject=true and skips
scheduling work, memstick_set_rw_addr waits forever for completion.
This causes a deadlock when memstick_remove_host tries to flush_workqueue,
waiting for memstick_check to complete, while memstick_check is blocked
waiting for mrq_complete completion.
Fix this by setting removing=true at the start of rtsx_usb_ms_drv_remove,
before any work cancellation. This ensures memstick_check will see the
removing flag immediately and exit early, avoiding the deadlock.
Fixes: 62c59a8786 ("memstick: Skip allocating card when removing host")
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250804013604.1311218-1-lijiayi@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dec8b38be4 upstream.
In preparation to fix replay timer timeout, add
sdhci_gli_mask_replay_timer_timeout() function
to simplify some of the code, allowing it to be re-used.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e5 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 685ca577b4 upstream.
The arm_smmu_attach_commit() updates master->ats_enabled before calling
arm_smmu_remove_master_domain() that is supposed to clean up everything
in the old domain, including the old domain's nr_ats_masters. So, it is
supposed to use the old ats_enabled state of the device, not an updated
state.
This isn't a problem if switching between two domains where:
- old ats_enabled = false; new ats_enabled = false
- old ats_enabled = true; new ats_enabled = true
but can fail cases where:
- old ats_enabled = false; new ats_enabled = true
(old domain should keep the counter but incorrectly decreased it)
- old ats_enabled = true; new ats_enabled = false
(old domain needed to decrease the counter but incorrectly missed it)
Update master->ats_enabled after arm_smmu_remove_master_domain() to fix
this.
Fixes: 7497f4211f ("iommu/arm-smmu-v3: Make changing domains be hitless for ATS")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250801030127.2006979-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 808471ddb0 upstream.
It's apparently possible to get an iov advanced all the way up to the end
of the current page we're looking at, e.g.
(gdb) p *iter
$24 = {iter_type = 4 '\004', nofault = false, data_source = false, iov_offset = 4096, {__ubuf_iovec = {
iov_base = 0xffff88800f5bc000, iov_len = 655}, {{__iov = 0xffff88800f5bc000, kvec = 0xffff88800f5bc000,
bvec = 0xffff88800f5bc000, folioq = 0xffff88800f5bc000, xarray = 0xffff88800f5bc000,
ubuf = 0xffff88800f5bc000}, count = 655}}, {nr_segs = 2, folioq_slot = 2 '\002', xarray_start = 2}}
Where iov_offset is 4k with 4k-sized folios
This should have been fine because we're only in the 2nd slot and there's
another one after this, but iterate_folioq should not try to map a folio
that skips the whole size, and more importantly part here does not end up
zero (because 'PAGE_SIZE - skip % PAGE_SIZE' ends up PAGE_SIZE and not
zero..), so skip forward to the "advance to next folio" code
Link: https://lkml.kernel.org/r/20250813-iot_iter_folio-v3-0-a0ffad2b665a@codewreck.org
Link: https://lkml.kernel.org/r/20250813-iot_iter_folio-v3-1-a0ffad2b665a@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Fixes: db0aa2e956 ("mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios")
Reported-by: Maximilian Bosch <maximilian@mbosch.me>
Reported-by: Ryan Lahfa <ryan@lahfa.xyz>
Reported-by: Christian Theune <ct@flyingcircus.io>
Reported-by: Arnout Engelen <arnout@bzzt.net>
Link: https://lkml.kernel.org/r/D4LHHUNLG79Y.12PI0X6BEHRHW@mbosch.me/
Acked-by: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> [6.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 508c1314b3 upstream.
The io_futex_data is allocated upfront and assigned to the io_kiocb
async_data field, but the request isn't marked with REQ_F_ASYNC_DATA
at that point. Those two should always go together, as the flag tells
io_uring whether the field is valid or not.
Additionally, on failure cleanup, the futex handler frees the data but
does not clear ->async_data. Clear the data and the flag in the error
path as well.
Thanks to Trend Micro Zero Day Initiative and particularly ReDress for
reporting this.
Cc: stable@vger.kernel.org
Fixes: 194bb58c60 ("io_uring: add support for futex wake and wait")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0c6eab5e4 upstream.
A BPF scheduler may want to use the built-in idle cpumasks in ops.init()
before the scheduler is fully initialized, either directly or through a
BPF timer for example.
However, this would result in an error, since the idle state has not
been properly initialized yet.
This can be easily verified by modifying scx_simple to call
scx_bpf_get_idle_cpumask() in ops.init():
$ sudo scx_simple
DEBUG DUMP
===========================================================================
scx_simple[121] triggered exit kind 1024:
runtime error (built-in idle tracking is disabled)
...
Fix this by properly initializing the idle state before ops.init() is
called. With this change applied:
$ sudo scx_simple
local=2 global=0
local=19 global=11
local=23 global=11
...
Fixes: d73249f887 ("sched_ext: idle: Make idle static keys private")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Backport to 6.12:
- Original commit doesn't apply cleanly to 6.12 since d73249f887 is
not present.
- This backport applies the same logical fix to prevent BPF scheduler
failures while accessing idle cpumasks from ops.init(). ]
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2be9ea9a7 upstream.
ata_gen_ata_sense() is always called for a failed qc missing sense data
so that a sense key, code and code qualifier can be generated using
ata_to_sense_error() from the qc status and error fields of its result
task file. However, if the qc does not have its result task file filled,
ata_gen_ata_sense() returns early without setting a sense key.
Improve this by defaulting to returning ABORTED COMMAND without any
additional sense code, since we do not know the reason for the failure.
The same fix is also applied in ata_gen_passthru_sense() with the
additional check that the qc failed (qc->err_mask is set).
Fixes: 816be86c79 ("ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41b70df5b3 upstream.
Ring provided buffers are potentially only valid within the single
execution context in which they were acquired. io_uring deals with this
and invalidates them on retry. But on the networking side, if
MSG_WAITALL is set, or if the socket is of the streaming type and too
little was processed, then it will hang on to the buffer rather than
recycle or commit it. This is problematic for two reasons:
1) If someone unregisters the provided buffer ring before a later retry,
then the req->buf_list will no longer be valid.
2) If multiple sockers are using the same buffer group, then multiple
receives can consume the same memory. This can cause data corruption
in the application, as either receive could land in the same
userspace buffer.
Fix this by disallowing partial retries from pinning a provided buffer
across multiple executions, if ring provided buffers are used.
Cc: stable@vger.kernel.org
Reported-by: pt x <superman.xpt@gmail.com>
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a3de58b12c ]
If all the subrequests in an unbuffered write stream fail, the subrequest
collector doesn't update the stream->transferred value and it retains its
initial LONG_MAX value. Unfortunately, if all active streams fail, then we
take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set
in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be
quickly assessed by taking the smallest value of all stream->transferred -
but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in
stream->transferred is valid and checking that when we integrate the
values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with
cache=none. It splices data to the target file. Once (if) it has used up
all the available scratch space, the writes start failing with ENOSPC.
This causes ->write_iter() to fail. However, it was returning
wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought
the amount transferred was non-zero) and iter_file_splice_write() would
then try to clean up that amount of pipe bufferage - leading to an oops
when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520
do_splice+0x197/0x4e0
or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282)
iter_file_splice_write (fs/splice.c:755)
Also put a warning check into splice to announce if ->write_iter() returned
that it had written more than it was asked to.
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Reported-by: Xiaoli Feng <fengxiaoli0714@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220445
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/915443.1755207950@warthog.procyon.org.uk
cc: Paulo Alcantara <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: netfs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ Dropped read_collect.c hunk ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 920e8ee2bf ]
The helper function fs_path_len() is trivial and doesn't need to change
its path argument, so make it inline and constify the argument.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 005b0a0c24 ]
Currently holes are sent as writes full of zeroes, which results in
unnecessarily using disk space at the receiving end and increasing the
stream size.
In some cases we avoid sending writes of zeroes, like during a full
send operation where we just skip writes for holes.
But for some cases we fill previous holes with writes of zeroes too, like
in this scenario:
1) We have a file with a hole in the range [2M, 3M), we snapshot the
subvolume and do a full send. The range [2M, 3M) stays as a hole at
the receiver since we skip sending write commands full of zeroes;
2) We punch a hole for the range [3M, 4M) in our file, so that now it
has a 2M hole in the range [2M, 4M), and snapshot the subvolume.
Now if we do an incremental send, we will send write commands full
of zeroes for the range [2M, 4M), removing the hole for [2M, 3M) at
the receiver.
We could improve cases such as this last one by doing additional
comparisons of file extent items (or their absence) between the parent
and send snapshots, but that's a lot of code to add plus additional CPU
and IO costs.
Since the send stream v2 already has a fallocate command and btrfs-progs
implements a callback to execute fallocate since the send stream v2
support was added to it, update the kernel to use fallocate for punching
holes for V2+ streams.
Test coverage is provided by btrfs/284 which is a version of btrfs/007
that exercises send stream v2 instead of v1, using fsstress with random
operations and fssum to verify file contents.
Link: https://github.com/kdave/btrfs-progs/issues/1001
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 374d45af64 ]
Whenever we issue a command we allocate a path and then compute it. For
the current inode this is not necessary since we have one preallocated
and computed in the send context structure, so we can use it instead
and avoid allocating and freeing a path.
For example if we have 100 extents to send (100 write commands) for a
file, we are allocating and freeing paths 100 times.
So improve on this by avoiding path allocation and freeing whenever a
command is for the current inode by using the current inode's path
stored in the send context structure.
A test was run before applying this patch and the previous one in the
series:
"btrfs: send: keep the current inode's path cached"
The test script is the following:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
mkfs.btrfs -f $DEV > /dev/null
mount $DEV $MNT
DIR="$MNT/one/two/three/four"
FILE="$DIR/foobar"
mkdir -p $DIR
# Create some empty files to get a deeper btree and therefore make
# path computations slower.
for ((i = 1; i <= 30000; i++)); do
echo -n > "$DIR/filler_$i"
done
for ((i = 0; i < 10000; i += 2)); do
offset=$(( i * 4096 ))
xfs_io -f -c "pwrite -S 0xab $offset 4K" $FILE > /dev/null
done
btrfs subvolume snapshot -r $MNT $MNT/snap
start=$(date +%s%N)
btrfs send -f /dev/null $MNT/snap
end=$(date +%s%N)
echo -e "\nsend took $(( (end - start) / 1000000 )) milliseconds"
umount $MNT
Result before applying the 2 patches: 1121 milliseconds
Result after applying the 2 patches: 815 milliseconds (-31.6%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc746acb7a ]
Whenever we need to send a command for the current inode, like sending
writes, xattr updates, truncates, utimes, etc, we compute the inode's
path each time, which implies doing some memory allocations and traversing
the inode hierarchy to extract the name of the inode and each ancestor
directory, and that implies doing lookups in the subvolume tree amongst
other operations.
Most of the time, by far, the current inode's path doesn't change while
we are processing it (like if we need to issue 100 write commands, the
path remains the same and it's pointless to compute it 100 times).
To avoid this keep the current inode's path cached in the send context
and invalidate it or update it whenever it's needed (after unlinks or
renames).
A performance test, and its results, is mentioned in the next patch in
the series (subject: "btrfs: send: avoid path allocation for the current
inode when issuing commands").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ec666c84de ]
Extract the logic to rename the current inode at process_recorded_refs()
into a helper function and use it, therefore removing duplicated logic
and making it easier for an upcoming patch by avoiding yet more duplicated
logic.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9453fe3297 ]
We have several local variables at process_recorded_refs() that are used
as booleans, with some of them having a 'bool' type while two of them
having an 'int' type. Change this to make them all use the 'bool' type
which is more clear and to make everything more consistent.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17f6a74d0b ]
We always send xattrs for the current inode only and both callers of
send_set_xattr() pass a path for the current inode. So move the path
allocation and computation to send_set_xattr(), reducing duplicated
code. This also facilitates an upcoming patch.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d2845519b0 ]
Fix up xfs_inumbers to now pass in the XFS_IBULK* flags into the flags
argument to xfs_inobt_walk, which expects the XFS_IWALK* flags.
Currently passing the wrong flags works for non-debug builds because
the only XFS_IWALK* flag has the same encoding as the corresponding
XFS_IBULK* flag, but in debug builds it can trigger an assert that no
incorrect flag is passed. Instead just extra the relevant flag.
Fixes: 5b35d922c5 ("xfs: Decouple XFS_IBULK flags from XFS_IWALK flags")
Cc: <stable@vger.kernel.org> # v5.19
Reported-by: cen zhang <zzzccc427@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62be7afcc1 ]
btrfs_zone_finish() can fail for several reason. If it is -EAGAIN, we need
to try it again later. So, put the block group to the retry list properly.
Failing to do so will keep the removable block group intact until remount
and can causes unnecessary ENOSPC.
Fixes: 74e91b12b1 ("btrfs: zoned: zone finish unused block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0497dfba98 ]
Similar to mark_bg_unused() and mark_bg_to_reclaim(), we have a few
places that use bg_list with refcounting, mostly for retrying failures
to reclaim/delete unused.
These have custom logic for handling locking and refcounting the bg_list
properly, but they actually all want to do the same thing, so pull that
logic out into a helper. Unfortunately, mark_bg_unused() does still need
the NEW flag to avoid prematurely marking stuff unused (even if refcount
is fine, we don't want to mess with bg creation), so it cannot use the
new helper.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 62be7afcc1 ("btrfs: zoned: requeue to unused block group list if zone finish failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7cbce3cb4c ]
All other users of the bg_list list_head increment the refcount when
adding to a list and decrement it when deleting from the list. Just for
the sake of uniformity and to try to avoid refcounting bugs, do it for
this list as well.
This does not fix any known ref-counting bug, as the reference belongs
to a single task (trans_handle is not shared and this represents
trans_handle->new_bgs linkage) and will not lose its original refcount
while that thread is running. And BLOCK_GROUP_FLAG_NEW protects against
ref-counting errors "moving" the block group to the unused list without
taking a ref.
With that said, I still believe it is simpler to just hold the extra ref
count for this list user as well.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 62be7afcc1 ("btrfs: zoned: requeue to unused block group list if zone finish failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33e8f24b52 ]
If we find an unexpected generation for the extent buffer we are cloning
at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the
transaction, meaning we allow to persist metadata with an unexpected
generation. Instead of warning only, abort the transaction and return
-EUCLEAN.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f06c942aa ]
Only one of the callers of __add_block_group_free_space() aborts the
transaction if the call fails, while the others don't do it and it's
either never done up the call chain or much higher in the call chain.
So make sure we abort the transaction at __add_block_group_free_space()
if it fails, which brings a couple benefits:
1) If some call chain never aborts the transaction, we avoid having some
metadata inconsistency because BLOCK_GROUP_FLAG_NEEDS_FREE_SPACE is
cleared when we enter __add_block_group_free_space() and therefore
__add_block_group_free_space() is never called again to add the block
group items to the free space tree, since the function is only called
when that flag is set in a block group;
2) If the call chain already aborts the transaction, then we get a better
trace that points to the exact step from __add_block_group_free_space()
which failed, which is better for analysis.
So abort the transaction at __add_block_group_free_space() if any of its
steps fails.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b63c8c1ede ]
Transaction aborts should be done next to the place the error happens,
which was not done in add_block_group_free_space().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 1f06c942aa ("btrfs: always abort transaction on failure to add block group to free space tree")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e124966775 ]
There's a race between a task disabling quotas and another running the
rescan ioctl that can result in a use-after-free of qgroup records from
the fs_info->qgroup_tree rbtree.
This happens as follows:
1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();
2) Task B enters btrfs_quota_disable() and calls
btrfs_qgroup_wait_for_completion(), which does nothing because at that
point fs_info->qgroup_rescan_running is false (it wasn't set yet by
task A);
3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups
from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;
4) Task A enters qgroup_rescan_zero_tracking() which starts iterating
the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock,
but task B is freeing qgroup records from that tree without holding
the lock, resulting in a use-after-free.
Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().
Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas
were already disabled.
Reported-by: cen zhang <zzzccc427@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAFRLqsV+cMDETFuzqdKSHk_FDm6tneea45krsHqPD6B3FetLpQ@mail.gmail.com/
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e61f6ab08 ]
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
Fixes: c034a43e72 ("staging: typec: Fairchild FUSB302 Type-c chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0e27a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 13b3af26a4 ]
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-3-c8405df47c19@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1e61f6ab08 ("usb: typec: fusb302: cache PD RX state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ee9cebd0a upstream.
In order to support future versions of the SVSM_CORE_PVALIDATE call, all
reserved fields within a PVALIDATE entry must be set to zero as an SVSM should
be ensuring all reserved fields are zero in order to support future usage of
reserved areas based on the protocol version.
Fixes: fcd042e864 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/7cde412f8b057ea13a646fb166b1ca023f6a5031.1755098819.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 452690be7d upstream.
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68fc0f4b0d upstream.
A flush of the MPTCP endpoints should not affect the MPTCP limits. In
other words, 'ip mptcp endpoint flush' should not change 'ip mptcp
limits'.
But it was the case: the MPTCP_PM_ATTR_RCV_ADD_ADDRS (add_addr_accepted)
limit was reset by accident. Removing the reset of this counter during a
flush fixes this issue.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reported-by: Thomas Dreibholz <dreibh@simula.no>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/579
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-2-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccab044697 upstream.
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350 ("mptcp: avoid processing packet if a subflow reset")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8151320c74 upstream.
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a458b29021 upstream.
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250818202724.15713-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddf7233fca upstream.
When enabling a sched_ext scheduler, we may trigger invalid task state
transitions, resulting in warnings like the following (which can be
easily reproduced by running the hotplug selftest in a loop):
sched_ext: Invalid task state transition 0 -> 3 for fish[770]
WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0
...
RIP: 0010:scx_set_task_state+0x7c/0xc0
...
Call Trace:
<TASK>
scx_enable_task+0x11f/0x2e0
switching_to_scx+0x24/0x110
scx_enable.isra.0+0xd14/0x13d0
bpf_struct_ops_link_create+0x136/0x1a0
__sys_bpf+0x1edd/0x2c30
__x64_sys_bpf+0x21/0x30
do_syscall_64+0xbb/0x370
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This happens because we skip initialization for tasks that are already
dead (with their usage counter set to zero), but we don't exclude them
during the scheduling class transition phase.
Fix this by also skipping dead tasks during class swiching, preventing
invalid task state transitions.
Fixes: a8532fac7b ("sched_ext: TASK_DEAD tasks must be switched into SCX on ops_enable")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
