commit 9911b1ed18 upstream.
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
Fixes: 5fb9b459b3 ("smb: client: count the number of posted recv_io messages in order to calculated credits")
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9da82dc73c upstream.
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cf2bbac62 upstream.
When we are about to use the last send credit that was
granted to us by the peer, we need to wait until
we are ourself able to grant at least one credit
to the peer. Otherwise it might not be possible
for the peer to grant more credits.
The following sections in MS-SMBD are related to this:
3.1.5.1 Sending Upper Layer Messages
...
If Connection.SendCredits is 1 and the CreditsGranted field of the
message is 0, stop processing.
...
3.1.5.9 Managing Credits Prior to Sending
...
If Connection.ReceiveCredits is zero, or if Connection.SendCredits is
one and the Connection.SendQueue is not empty, the sender MUST allocate
and post at least one receive of size Connection.MaxReceiveSize and MUST
increment Connection.ReceiveCredits by the number allocated and posted.
If no receives are posted, the processing MUST return a value of zero to
indicate to the caller that no Send message can be currently performed.
...
This problem was found by running this on Windows 2025
against ksmbd with required smb signing:
'frametest.exe -r 4k -t 20 -n 2000' after
'frametest.exe -w 4k -t 20 -n 2000'.
Link: https://lore.kernel.org/linux-cifs/b58fa352-2386-4145-b42e-9b4b1d484e17@samba.org/
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34abd408c8 upstream.
It turns out that our code will corrupt the stream of
reassabled data transfer messages when we trigger an
immendiate (empty) send.
In order to fix this we'll have a single 'batch' credit per
connection. And code getting that credit is free to use
as much messages until remaining_length reaches 0, then
the batch credit it given back and the next logical send can
happen.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8106978d40 upstream.
In captures I saw that Windows was granting 191 credits in a batch
when its peer posted a lot of messages. We are asking for a
credit target of 255 and 191 is 252*3/4.
So we also use that logic in order to fill the
recv buffers available to the peer.
Fixes: a7eef6144c ("smb: server: queue post_recv_credits_work in put_recvmsg() and avoid count_avail_recvmsg")
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26ad87a2cf upstream.
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
This fixes regression Namjae reported with
the 6.18 release.
Fixes: 89b021a726 ("smb: server: manage recv credits by counting posted recv_io and granted credits")
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e94268b21 upstream.
It turns out that our code will corrupt the stream of
reassabled data transfer messages when we trigger an
immendiate (empty) send.
In order to fix this we'll have a single 'batch' credit per
connection. And code getting that credit is free to use
as much messages until remaining_length reaches 0, then
the batch credit it given back and the next logical send can
happen.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e3c5052f9 upstream.
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
Fixes: 5fb9b459b3 ("smb: client: count the number of posted recv_io messages in order to calculated credits")
Fixes: 89b021a726 ("smb: server: manage recv credits by counting posted recv_io and granted credits")
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77ffbcac4e upstream.
On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is
freed via free_transport(), which does not decrement active_num_conn,
leaking this counter.
Replace free_transport() with ksmbd_tcp_disconnect().
Fixes: 0d0d4680db ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 010eb01ce2 upstream.
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset.
Reported-by: tianshuo han <hantianshuo233@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec306600d5 upstream.
is_open, has_lease and on_list are stored in the same bitfield byte in
struct cached_fid but are updated in different code paths that may run
concurrently. Bitfield assignments generate byte read–modify–write
operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can
restore stale values of the others.
A possible interleaving is:
CPU1: load old byte (has_lease=1, on_list=1)
CPU2: clear both flags (store 0)
CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits
To avoid this class of races, convert these flags to separate bool
fields.
Cc: stable@vger.kernel.org
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9121466148 upstream.
io_uring keeps a per-task io-wq around, even when the task no longer has
any io_uring instances.
If the task previously used io_uring for file I/O, this can leave an
unrelated iou-wrk-* worker thread behind after the last io_uring
instance is gone.
When the last io_uring ctx is removed from the task context, mark the
io-wq exit-on-idle so workers can go away. Clear the flag on subsequent
io_uring usage.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38aa434ab9 upstream.
io-wq uses an idle timeout to shrink the pool, but keeps the last worker
around indefinitely to avoid churn.
For tasks that used io_uring for file I/O and then stop using io_uring,
this can leave an iou-wrk-* thread behind even after all io_uring
instances are gone. This is unnecessary overhead and also gets in the
way of process checkpoint/restore.
Add an exit-on-idle state that makes all io-wq workers exit as soon as
they become idle, and provide io_wq_set_exit_on_idle() to toggle it.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 841e47d56c upstream.
After commit bdce162f2e ("riscv: Use 64-bit variable for output in
__get_user_asm"), there is a warning when building for 32-bit RISC-V:
In file included from include/linux/uaccess.h:13,
from include/linux/sched/task.h:13,
from include/linux/sched/signal.h:9,
from include/linux/rcuwait.h:6,
from include/linux/mm.h:36,
from include/linux/migrate.h:5,
from mm/migrate.c:16:
mm/migrate.c: In function 'do_pages_move':
arch/riscv/include/asm/uaccess.h:115:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
115 | (x) = (__typeof__(x))__tmp; \
| ^
arch/riscv/include/asm/uaccess.h:198:17: note: in expansion of macro '__get_user_asm'
198 | __get_user_asm("lb", (x), __gu_ptr, label); \
| ^~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:218:9: note: in expansion of macro '__get_user_nocheck'
218 | __get_user_nocheck(x, ptr, __gu_failed); \
| ^~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:255:9: note: in expansion of macro '__get_user_error'
255 | __get_user_error(__gu_val, __gu_ptr, __gu_err); \
| ^~~~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:285:17: note: in expansion of macro '__get_user'
285 | __get_user((x), __p) : \
| ^~~~~~~~~~
mm/migrate.c:2358:29: note: in expansion of macro 'get_user'
2358 | if (get_user(p, pages + i))
| ^~~~~~~~
Add an intermediate cast to 'unsigned long', which is guaranteed to be the same
width as a pointer, before the cast to the type of the output variable to clear
up the warning.
Fixes: bdce162f2e ("riscv: Use 64-bit variable for output in __get_user_asm")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601210526.OT45dlOZ-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260121-riscv-fix-int-to-pointer-cast-v1-1-b83eebe57c76@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70b4db7d25 upstream.
The recent fix commit for addressing the OOB access of PCM URB data
buffer caused a regression on Behringer UMC2020HD device, resulting in
choppy sound. The fix used ep->max_urb_frames for the upper limit
check, and this is no right value to be referred.
Use the actual buffer size (ctx->buffer_size) as the upper limit
instead, which also avoids the regression on the device above.
Fixes: ef5749ef8b ("ALSA: usb-audio: Prevent excessive number of frames")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220997
Link: https://patch.msgid.link/20260121082025.718748-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1aaedafb21 upstream.
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR55xU devices.
The former quirk entry did not acomplish this and is removed.
Fixes: b48fe9af1e ("ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU")
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260123221233.28273-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0a75b40c9 ]
The COMMAND1 register bits [29:28] set the SPI mode, which controls
the clock idle level. When a transfer ends, tegra_spi_transfer_end()
writes def_command1_reg back to restore the default state, but this
register value currently lacks the mode bits. This results in the
clock always being configured as idle low, breaking devices that
need it high.
Fix this by storing the mode bits in def_command1_reg during setup,
to prevent this field from always being cleared.
Fixes: f333a331ad ("spi/tegra114: add spi driver")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20260204141212.1540382-1-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41d9a6795b ]
In tegra_slink_probe(), when platform_get_irq() fails, it directly
returns from the function with an error code, which causes a memory leak.
Replace it with a goto label to ensure proper cleanup.
Fixes: eb9913b511 ("spi: tegra: Fix missing IRQ check in tegra_slink_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260202-slink-v1-1-eac50433a6f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edf9088b6e ]
Now that all other accesses to curr_xfer are done under the lock,
protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the
spinlock. Without this protection, the following race can occur:
CPU0 (ISR thread) CPU1 (timeout path)
---------------- -------------------
if (!tqspi->curr_xfer)
// sees non-NULL
spin_lock()
tqspi->curr_xfer = NULL
spin_unlock()
handle_*_xfer()
spin_lock()
t = tqspi->curr_xfer // NULL!
... t->len ... // NULL dereference!
With this patch, all curr_xfer accesses are now properly synchronized.
Although all accesses to curr_xfer are done under the lock, in
tegra_qspi_isr_thread() it checks for NULL, releases the lock and
reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer().
There is a potential for an update in between, which could cause a NULL
pointer dereference.
To handle this, add a NULL check inside the handlers after acquiring
the lock. This ensures that if the timeout path has already cleared
curr_xfer, the handler will safely return without dereferencing the
NULL pointer.
Fixes: b4e002d8a7 ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-6-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d7723e816 ]
Protect the curr_xfer clearing in tegra_qspi_non_combined_seq_xfer()
with the spinlock to prevent a race with the interrupt handler that
reads this field to check if a transfer is in progress.
Fixes: b4e002d8a7 ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-5-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf4528ab28 ]
The curr_xfer field is read by the IRQ handler without holding the lock
to check if a transfer is in progress. When clearing curr_xfer in the
combined sequence transfer loop, protect it with the spinlock to prevent
a race with the interrupt handler.
Protect the curr_xfer clearing at the exit path of
tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race
with the interrupt handler that reads this field.
Without this protection, the IRQ handler could read a partially updated
curr_xfer value, leading to NULL pointer dereference or use-after-free.
Fixes: b4e002d8a7 ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-4-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5a4d7f5e3 ]
When the timeout handler processes a completed transfer and signals
completion, the transfer thread can immediately set up the next transfer
and assign curr_xfer to point to it.
If a delayed ISR from the previous transfer then runs, it checks if
(!tqspi->curr_xfer) (currently without the lock also -- to be fixed
soon) to detect stale interrupts, but this check passes because
curr_xfer now points to the new transfer. The ISR then incorrectly
processes the new transfer's context.
Protect the curr_xfer assignment with the spinlock to ensure the ISR
either sees NULL (and bails out) or sees the new value only after the
assignment is complete.
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-3-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef13ba3576 ]
Move the assignment of the transfer pointer from curr_xfer inside the
spinlock critical section in both handle_cpu_based_xfer() and
handle_dma_based_xfer().
Previously, curr_xfer was read before acquiring the lock, creating a
window where the timeout path could clear curr_xfer between reading it
and using it. By moving the read inside the lock, the handlers are
guaranteed to see a consistent value that cannot be modified by the
timeout path.
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-2-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aabd8ea0aa ]
When the ISR thread wakes up late and finds that the timeout handler
has already processed the transfer (curr_xfer is NULL), return
IRQ_HANDLED instead of IRQ_NONE.
Use a similar approach to tegra_qspi_handle_timeout() by reading
QSPI_TRANS_STATUS and checking the QSPI_RDY bit to determine if the
hardware actually completed the transfer. If QSPI_RDY is set, the
interrupt was legitimate and triggered by real hardware activity.
The fact that the timeout path handled it first doesn't make it
spurious. Returning IRQ_NONE incorrectly suggests the interrupt
wasn't for this device, which can cause issues with shared interrupt
lines and interrupt accounting.
Fixes: b4e002d8a7 ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-1-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41399c5d47 ]
Higher voltage settings were unusable due to incorrect n_voltages values
causing registration failures. For example, setting aldo4 to 3.3V failed
with -EINVAL because the required selector (123) exceeded the allowed
range (n_voltages=117).
Fix by aligning n_voltages with the hardware register widths per the P1
datasheet [1]:
- BUCK: 255 (was 254), allows selectors 0-254, selector 255 is reserved
- LDO: 128 (was 117), allows selectors 0-127, selectors 0-10 are for
suspend mode, valid operational range is 11-127
This enables the full voltage range supported by the hardware.
Fixes: 8b84d712ad ("regulator: spacemit: support SpacemiT P1 regulators")
Link: https://developer.spacemit.com/documentation [1]
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20260122-spacemit-p1-v1-1-309be27fbff9@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b126097b03 upstream.
When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX,
the length handler sets the state to IMX_I2C_STATE_FAILED. However,
i2c_imx_master_isr() unconditionally overwrites this with
IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns
buffers and crashes the system.
Guard the state transition to preserve error states set by the length
handler.
Fixes: 5f5c2d4579 ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260116111906.3413346-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 124bdc6ecc ]
When the support for the Sound Blaster X-Fi Surround 5.1 Pro was added,
the existing logic for the X-Fi Surround 5.1 in snd_audigy2nx_led_put()
was broken due to missing *else* before the added *if*: snd_usb_ctl_msg()
became incorrectly called twice and an error from first snd_usb_ctl_msg()
call ignored. As the added snd_usb_ctl_msg() call was totally identical
to the existing one for the "plain" X-Fi Surround 5.1, just merge those
two *if* statements while fixing the broken logic...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 7cdd8d7313 ("ALSA: usb-audio - Add support for USB X-Fi S51 Pro")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Link: https://patch.msgid.link/20260203161558.18680-1-s.shtylyov@auroraos.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10db9f6899 ]
Use the dev_*_ratelimit() macros if the cs_dsp KUnit tests are enabled
in the build, and allow the KUnit tests to disable message output.
Some of the KUnit tests cause a very large number of log messages from
cs_dsp, because the tests perform many different test cases. This could
cause some lines to be dropped from the kernel log. Dropped lines can
prevent the KUnit wrappers from parsing the ktap output in the dmesg log.
The KUnit builds of cs_dsp export three bools that the KUnit tests can
use to entirely disable log output of err, warn and info messages. Some
tests have been updated to use this, replacing the previous fudge of a
usleep() in the exit handler of each test. We don't necessarily want to
disable all log messages if they aren't expected to be excessive,
so the rate-limiting allows leaving some logging enabled.
The rate-limited macros are not used in normal builds because it is not
appropriate to rate-limit every message. That could cause important
messages to be dropped, and there wouldn't be such a high rate of
messages in normal operation.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-sound/af393f08-facb-4c44-a054-1f61254803ec@opensource.cirrus.com/T/#t
Fixes: cd8c058499 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Link: https://patch.msgid.link/20260130171256.863152-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78cfd833bc ]
cs_dsp_debugfs_wmfw_read() and cs_dsp_debugfs_bin_read() were identical
except for which struct member they printed. Move all this duplicated
code into a common function cs_dsp_debugfs_string_read().
The check for dsp->booted has been removed because this is redundant.
The two strings are set when the DSP is booted and cleared when the
DSP is powered-down.
Access to the string char * must be protected by the pwr_lock mutex. The
string is passed into cs_dsp_debugfs_string_read() as a pointer to the
char * so that the mutex lock can also be factored out into
cs_dsp_debugfs_string_read().
wmfw_file_name and bin_file_name members of struct cs_dsp have been
changed to const char *. It makes for a better API to pass a const
pointer into cs_dsp_debugfs_string_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 10db9f6899 ("firmware: cs_dsp: rate-limit log messages in KUnit builds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbf4a17ad9 ]
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c5 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f72514b3c5 ("ipv6: clear RA flags when adding a static route")
Reported-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cb809def1baaac68ab92
Tested-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260204095837.1285552-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 071be3b0b6 ]
The initial state of dma_needs_unmap may be false, but change to true
while mapping the data iterator. Enabling swiotlb is one such case that
can change the result. The nvme driver needs to save the mapped dma
vectors to be unmapped later, so allocate as needed during iteration
rather than assume it was always allocated at the beginning. This fixes
a NULL dereference from accessing an uninitialized dma_vecs when the
device dma unmapping requirements change mid-iteration.
Fixes: b8b7570a7e ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping")
Link: https://lore.kernel.org/linux-nvme/20260202125738.1194899-1-pradeep.pragallapati@oss.qualcomm.com/
Reported-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cb1b32713 ]
xe_guc_print_info is void-returning, but the function pointer it is
assigned to expects an int-returning function, leading to the following
CFI error:
[ 206.873690] CFI failure at guc_debugfs_show+0xa1/0xf0 [xe]
(target: xe_guc_print_info+0x0/0x370 [xe]; expected type: 0xbe3bc66a)
Fix this by updating xe_guc_print_info to return an integer.
Fixes: e15826bb3c ("drm/xe/guc: Refactor GuC debugfs initialization")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: George D Sworo <george.d.sworo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129182547.32899-2-daniele.ceraolospurio@intel.com
(cherry picked from commit dd8ea2f2ab)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f41c5d1510 ]
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones.
Fixes: 628bd3e49c ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Andrew Fasano <andrew.fasano@nist.gov>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 831a2b2791 ]
This is a printf-style function, which gcc -Werror=suggest-attribute=format
correctly points out:
drivers/hwmon/occ/common.c: In function 'occ_init_attribute':
drivers/hwmon/occ/common.c:761:9: error: function 'occ_init_attribute' might be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
Add the attribute to avoid this warning and ensure any incorrect
format strings are detected here.
Fixes: 744c2fe950 ("hwmon: (occ) Rework attribute registration for stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260203163440.2674340-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ee9b3e091 ]
The topology query helper advanced the user pointer by the size
of the pointer, not the size of the structure. This can misalign
the output blob and corrupt the following mask. Fix the increment
to use sizeof(*topo).
There is no issue currently, as sizeof(*topo) happens to be equal
to sizeof(topo) on 64-bit systems (both evaluate to 8 bytes).
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260130043907.465128-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit c2a6859138)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e0c8f4d16 ]
The mgag200_bmc_stop_scanout() function is called by the .atomic_disable()
handler for the MGA G200 VGA BMC encoder. This function performs a few
register writes to inform the BMC of an upcoming mode change, and then
polls to wait until the BMC actually stops.
The polling is implemented using a busy loop with udelay() and an iteration
timeout of 300, resulting in the function blocking for 300 milliseconds.
The function gets called ultimately by the output_poll_execute work thread
for the DRM output change polling thread of the mgag200 driver:
kworker/0:0-mm_ 3528 [000] 4555.315364:
ffffffffaa0e25b3 delay_halt.part.0+0x33
ffffffffc03f6188 mgag200_bmc_stop_scanout+0x178
ffffffffc087ae7a disable_outputs+0x12a
ffffffffc087c12a drm_atomic_helper_commit_tail+0x1a
ffffffffc03fa7b6 mgag200_mode_config_helper_atomic_commit_tail+0x26
ffffffffc087c9c1 commit_tail+0x91
ffffffffc087d51b drm_atomic_helper_commit+0x11b
ffffffffc0509694 drm_atomic_commit+0xa4
ffffffffc05105e8 drm_client_modeset_commit_atomic+0x1e8
ffffffffc0510ce6 drm_client_modeset_commit_locked+0x56
ffffffffc0510e24 drm_client_modeset_commit+0x24
ffffffffc088a743 __drm_fb_helper_restore_fbdev_mode_unlocked+0x93
ffffffffc088a683 drm_fb_helper_hotplug_event+0xe3
ffffffffc050f8aa drm_client_dev_hotplug+0x9a
ffffffffc088555a output_poll_execute+0x29a
ffffffffa9b35924 process_one_work+0x194
ffffffffa9b364ee worker_thread+0x2fe
ffffffffa9b3ecad kthread+0xdd
ffffffffa9a08549 ret_from_fork+0x29
On a server running ptp4l with the mgag200 driver loaded, we found that
ptp4l would sometimes get blocked from execution because of this busy
waiting loop.
Every so often, approximately once every 20 minutes -- though with large
variance -- the output_poll_execute() thread would detect some sort of
change that required performing a hotplug event which results in attempting
to stop the BMC scanout, resulting in a 300msec delay on one CPU.
On this system, ptp4l was pinned to a single CPU. When the
output_poll_execute() thread ran on that CPU, it blocked ptp4l from
executing for its 300 millisecond duration.
This resulted in PTP service disruptions such as failure to send a SYNC
message on time, failure to handle ANNOUNCE messages on time, and clock
check warnings from the application. All of this despite the application
being configured with FIFO_RT and a higher priority than the background
workqueue tasks. (However, note that the kernel did not use
CONFIG_PREEMPT...)
It is unclear if the event is due to a faulty VGA connection, another bug,
or actual events causing a change in the connection. At least on the system
under test it is not a one-time event and consistently causes disruption to
the time sensitive applications.
The function has some helpful comments explaining what steps it is
attempting to take. In particular, step 3a and 3b are explained as such:
3a - The third step is to verify if there is an active scan. We are
waiting on a 0 on remhsyncsts (<XSPAREREG<0>.
3b - This step occurs only if the remove is actually scanning. We are
waiting for the end of the frame which is a 1 on remvsyncsts
(<XSPAREREG<1>).
The actual steps 3a and 3b are implemented as while loops with a
non-sleeping udelay(). The first step iterates while the tmp value at
position 0 is *not* set. That is, it keeps iterating as long as the bit is
zero. If the bit is already 0 (because there is no active scan), it will
iterate the entire 300 attempts which wastes 300 milliseconds in total.
This is opposite of what the description claims.
The step 3b logic only executes if we do not iterate over the entire 300
attempts in the first loop. If it does trigger, it is trying to check and
wait for a 1 on the remvsyncsts. However, again the condition is actually
inverted and it will loop as long as the bit is 1, stopping once it hits
zero (rather than the explained attempt to wait until we see a 1).
Worse, both loops are implemented using non-sleeping waits which spin
instead of allowing the scheduler to run other processes. If the kernel is
not configured to allow arbitrary preemption, it will waste valuable CPU
time doing nothing.
There does not appear to be any documentation for the BMC register
interface, beyond what is in the comments here. It seems more probable that
the comment here is correct and the implementation accidentally got
inverted from the intended logic.
Reading through other DRM driver implementations, it does not appear that
the .atomic_enable or .atomic_disable handlers need to delay instead of
sleep. For example, the ast_astdp_encoder_helper_atomic_disable() function
calls ast_dp_set_phy_sleep() which uses msleep(). The "atomic" in the name
is referring to the atomic modesetting support, which is the support to
enable atomic configuration from userspace, and not to the "atomic context"
of the kernel. There is no reason to use udelay() here if a sleep would be
sufficient.
Replace the while loops with a read_poll_timeout() based implementation
that will sleep between iterations, and which stops polling once the
condition is met (instead of looping as long as the condition is met). This
aligns with the commented behavior and avoids blocking on the CPU while
doing nothing.
Note the RREG_DAC is implemented using a statement expression to allow
working properly with the read_poll_timeout family of functions. The other
RREG_<TYPE> macros ought to be cleaned up to have better semantics, and
several places in the mgag200 driver could make use of RREG_DAC or similar
RREG_* macros should likely be cleaned up for better semantics as well, but
that task has been left as a future cleanup for a non-bugfix.
Fixes: 414c453106 ("mgag200: initial g200se driver (v2)")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260202-jk-mgag200-fix-bad-udelay-v2-1-ce1e9665987d@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c2c3c38be ]
The udp GRO complete stage assumes that all the packets inserted the RX
have the `encapsulation` flag zeroed. Such assumption is not true, as a
few H/W NICs can set such flag when H/W offloading the checksum for
an UDP encapsulated traffic, the tun driver can inject GSO packets with
UDP encapsulation and the problematic layout can also be created via
a veth based setup.
Due to the above, in the problematic scenarios, udp4_gro_complete() uses
the wrong network offset (inner instead of outer) to compute the outer
UDP header pseudo checksum, leading to csum validation errors later on
in packet processing.
Address the issue always clearing the encapsulation flag at GRO completion
time. Such flag will be set again as needed for encapsulated packets by
udp_gro_complete().
Fixes: 5ef31ea5d0 ("net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/562638dbebb3b15424220e26a180274b387e2a88.1770032084.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f613e8b4af ]
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1d10f8a1f4 ("net-procfs: show net devices bound packet types")
Fixes: c353e8983e ("net: introduce per netns packet chains")
Reported-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Reported-by: Dong Chenchen <dongchenchen2@huawei.com>
Closes: https://lore.kernel.org/netdev/CANn89iKRRKPnWjJmb-_3a=sq+9h6DvTQM4DBZHT5ZRGPMzQaiA@mail.gmail.com/T/#m7b80b9fc9b9267f90e0b7aad557595f686f9c50d
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Link: https://patch.msgid.link/20260202205217.2881198-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78211543d2 ]
The devm_gpiod_get_optional() function may return an ERR_PTR in case of
genuine GPIO acquisition errors, not just NULL which indicates the
legitimate absence of an optional GPIO.
Add an IS_ERR() check after the call in adin1110_check_spi(). On error,
return the error code to ensure proper failure handling rather than
proceeding with invalid pointers.
Fixes: 36934cac7a ("net: ethernet: adi: adin1110: add reset GPIO")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260202040228.4129097-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f959d37c1 ]
Some shimmer/colorful points appears when using the steamOS color
pipeline for HDR on gaming with DCN32. These points look like black
values being wrongly mapped to red/blue/green values. It was caused
because the number of hw points in regular LUTs and in a shaper LUT was
treated as the same.
DCN3+ regular LUTs have 257 bases and implicit deltas (i.e. HW
calculates them), but shaper LUT is a special case: it has 256 bases and
256 deltas, as in DCN1-2 regular LUTs, and outputs 14-bit values.
Fix that by setting by decreasing in 1 the number of HW points computed
in the LUT segmentation so that shaper LUT (i.e. fixpoint == true) keeps
the same DCN10 CM logic and regular LUTs go with `hw_points + 1`.
CC: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Fixes: 4d5fd3d08e ("drm/amd/display: PQ tail accuracy")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5006505b19)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ff641011a ]
mlo_scan_start_wk is not canceled on disconnection. In fact, it is not
canceled anywhere except in the restart cleanup, where we don't really
have to.
This can cause an init-after-queue issue: if, for example, the work was
queued and then drv_change_interface got executed.
This can also cause use-after-free: if the work is executed after the
vif is freed.
Fixes: 9748ad82a9 ("wifi: iwlwifi: defer MLO scan after link activation")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260129212650.a36482a60719.I5bf64a108ca39dacb5ca0dcd8b7258a3ce8db74c@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c28d765ec5 ]
It is not recommended to access the 32‑bit registers of this hardware IP
using lower‑width accessors (i.e. 16‑bit), and the only exception to
this rule was introduced in the initial ENETC v1 driver for the PMAR1
register, which holds the lower 16 bits of the primary MAC address of
an SI. Meanwhile, this exception has been replicated in the v4 driver
code as well.
Since LS1028 (the only SoC with ENETC v1) is not affected by this issue,
the current patch converts the 16‑bit reads from PMAR1 starting with
ENETC v4.
Fixes: 99100d0d99 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-5-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21d0fc95b5 ]
For ENETC v4, which is integrated into more complex SoCs (compared to v1),
16‑bit register writes are blocked in the SoC interconnect on some chips.
To be fair, it is not recommended to access 32‑bit registers of this IP
using lower‑width accessors (i.e. 16‑bit), and the only exception to
this rule was introduced by me in the initial ENETC v1 driver for the
PMAR1 register, which holds the lower 16 bits of the primary MAC address
of an SI. Meanwhile, this exception has been replicated for v4 as well.
Since LS1028 (the only SoC with ENETC v1) is not affected by this issue,
the current patch fixes the 16‑bit writes to PMAR1 starting with ENETC
v4.
Fixes: 99100d0d99 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-4-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ae13b2e64 ]
For ENETC v4 these settings are controlled by the global ENETC
command cache attribute registers (EnCAR), from the IERB register
block.
The hardcoded CDBR cacheability settings were inherited from LS1028A,
and should be removed from the ENETC v4 driver as they conflict
with the global IERB settings.
Fixes: e3f4a0a8dd ("net: enetc: add command BD ring support for i.MX95 ENETC")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-3-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
