Module asus-armoury must use AC tunables to check availability
of power-related firmware attributes: fix missing attributes
by using AC attributes instead of DC.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20251123150535.267339-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Ayaneo EC resets after hibernation, losing the charge control state.
Add a small PM hook to restore this state on hibernation resume.
The fan speed is also lost during hibernation, but since hibernation
failures are common with this class of devices, setting a low fan speed
when the userspace program controlling the fan will potentially not
take over could cause the device to overheat, so it is not restored.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-7-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, the oxpec driver contains Ayaneo devices. Move them to the
new ayaneo-ec driver, which is dedicated to them.
As this driver supports charge inhibition for Ayaneo, add support for it
for the AIR, AIR 1S, AB05-Medoncino, AIR Pro, and Kun, referenced from
the out-of-tree ayaneo-platform driver.
In addition, update the readmes of oxpec to reflect this change.
Link: https://github.com/ShadowBlip/ayaneo-platform
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-6-lkml@antheas.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Ayaneo 3 features hot-swappable controller modules. The ejection
and management is done through HID. However, after ejecting the modules,
the controller needs to be power cycled via the EC to re-initialize.
For this, the EC provides a variable that holds whether the left or
right modules are connected, and a power control register to turn
the controller on or off. After ejecting the modules, the controller
should be turned off. Then, after both modules are reinserted,
the controller may be powered on again to re-initialize.
This patch introduces two new sysfs attributes:
- `controller_modules`: a read-only attribute that indicates whether
the left and right modules are connected (none, left, right, both).
- `controller_power`: a read-write attribute that allows the user
to turn the controller on or off (with '1'/'0').
Therefore, after ejection is complete, userspace can power off the
controller, then wait until both modules have been reinserted
(`controller_modules` will return 'both') to turn on the controller.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-5-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Ayaneo devices support charge inhibition via the EC. This inhibition
only works while the device is powered on, and resets between restarts.
However, it is maintained across suspend/resume cycles.
The EC does not support charge threshold control. Instead, userspace
software on Windows manually toggles charge inhibition depending on
battery level.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add hwmon single fan sensor reads and control for Ayaneo devices.
The register and method of access is the same for all devices.
Reviewed-by: Armin-Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-3-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Recent Ayaneo devices feature an ACPI mapped Embedded Controller (EC)
with standard addresses across models that provides access to fan
speed, fan control, battery charge limits, and controller power
controls. Introduce a new driver stub that will handle these driver
features.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20251119174505.597218-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are two return statements in a row here. The first one is wrong
so delete that one. This changes the return value to -ENODEV.
Fixes: f99eb09809 ("platform/x86: asus-armoury: move existing tunings to asus-armoury module")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSBqRHs256Tz7EKr@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add METRICS_TABLE_ID (7) and use it when requesting the metrics
transfer table instead of the hard-coded literal. This clarifies the
meaning of the argument to amd_pmf_send_cmd() and centralizes the table
ID definition for easier maintenance.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251120105210.3945710-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add SET_CMD and GET_CMD constants and replace boolean values passed as the
get/set argument to amd_pmf_send_cmd() with the new explicit flags. This
improves readability, avoids ambiguity around true/false and 0/1 usage.
There is no functional change.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251120105210.3945710-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update smu_pmf_metrics_v2 to use NPU terminology instead of IPU. This
aligns the driver with current firmware/hardware naming and fixes the
mismatch. There is no functional change and no impact to the struct layout
and only field names are updated.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by:
Link: https://patch.msgid.link/20251120105210.3945710-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the WMI core code into a separate directory to prepare for
future additions to the WMI driver. Also update the description
of the Kconfig entry to better fit with the other subsystem
Kconfig entries.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The external function definitions do not need the "extern" keyword.
Remove it to silence the associated checkpatch warnings.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When evaluating a WMxx/WSxx ACPI control method, the data buffer
either needs to be passed as an ACPI buffer or as an ACPI string.
Use the correct type (buffer/string) when populating the associated
ACPI object.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the function responsible for converting between utf16 and
utf8 strings will ignore any characters that cannot be converted. This
however also includes multi-byte characters that do not fit into the
provided string buffer.
This can cause problems if such a multi-byte character is followed by
a single-byte character. In such a case the multi-byte character might
be ignored when the provided string buffer is too small, but the
single-byte character might fit and is thus still copied into the
resulting string.
Fix this by stop filling the provided string buffer once a character
does not fit. In order to be able to do this extend utf32_to_utf8()
to return useful errno codes instead of -1.
Fixes: 74675a5850 ("NLS: update handling of Unicode")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds the ppt_* and nv_* tuning knobs that are available via WMI methods
and adds proper min/max levels plus defaults.
The min/max are defined by ASUS and typically gained by looking at what
they allow in the ASUS Armoury Crate application - ASUS does not share
the values outside of this. It could also be possible to gain the AMD
values by use of ryzenadj and testing for the minimum stable value.
The general rule of thumb for adding to the match table is that if the
model range has a single CPU used throughout, then the DMI match can
omit the last letter of the model number as this is the GPU model.
If a min or max value is not provided it is assumed that the particular
setting is not supported. for example ppt_pl2_sppt_min/max is not set.
If a <ppt_setting>_def is not set then the default is assumed to be
<ppt_setting>_max
It is assumed that at least AC settings are available so that the
firmware attributes will be created - if no DC table is available
and power is on DC, then reading the attributes is -ENODEV.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Schyboll <dragonn@op.pl>
Tested-by: Porfet Lillian <porfet828@gmail.com>
Link: https://patch.msgid.link/20251102215319.3126879-10-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With the existence of the asus-armoury module the attributes no longer
need to live under the /sys/devices/platform/asus-nb-wmi/ path.
Deprecate all those that were implemented in asus-bioscfg with the goal
of removing them fully in the next LTS cycle.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20251102215319.3126879-8-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add screen_auto_brightness toggle supported on some laptops.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251102215319.3126879-7-denis.benato@linux.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implement the APU memory size control under the asus-armoury module using
the fw_attributes class.
This allows the APU allocated memory size to be adjusted depending on
the users priority. A reboot is required after change.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-5-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add panel_hd_mode to toggle the panel mode between single and high
definition modes.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251102215319.3126879-4-denis.benato@linux.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The fw_attributes_class provides a much cleaner interface to all of the
attributes introduced to asus-wmi. This patch moves all of these extra
attributes over to fw_attributes_class, and shifts the bulk of these
definitions to a new kernel module to reduce the clutter of asus-wmi
with the intention of deprecating the asus-wmi attributes in future.
The work applies only to WMI methods which don't have a clearly defined
place within the sysfs and as a result ended up lumped together in
/sys/devices/platform/asus-nb-wmi/ with no standard API.
Where possible the fw attrs now implement defaults, min, max, scalar,
choices, etc. As en example dgpu_disable becomes:
/sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/
├── current_value
├── display_name
├── possible_values
└── type
as do other attributes.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Export symbols for reading/writing WMI symbols using a namespace.
Existing functions:
- asus_wmi_evaluate_method
- asus_wmi_set_devstate
New function:
- asus_wmi_get_devstate_dsts
The new function is intended for use with DSTS WMI method only and
avoids requiring the asus_wmi driver data to select the WMI method.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20251102215319.3126879-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Drop profile matching micro-optimizations to improve readability and
long-term maintainability.
Additionally, is_awcc_thermal_profile_id is implicitly ignoring the
AWCC_PROFILE_SPECIAL_GMODE ID. State this explicitly with code and a
comment.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251103-aw-gmode-v1-1-eba7b7be0a9c@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The GBMD/SBMC interface on recent devices supports Rapid Charge mode
(charge_types: Fast) in addition to Conservation Mode (charge_types:
Long_Life).
Query the GBMD interface on probe to determine if a device supports
Rapid Charge. If so, expose these two modes while carefully maintaining
their mutually exclusive state, which aligns with the behavior of
manufacturer utilities on Windows.
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Ike Panhc <ikepanhc@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-By: Jelle van der Waa <jelle@vdwaa.nl>
Link: https://patch.msgid.link/20251105182832.104946-5-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some recent devices supports more charge_types. To properly support
these device without breaking the existing ones, we need to define
multiple power_supply_ext for different GBMD/SBMC interface revisions.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20251105182832.104946-4-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The upcoming changes for Rapid Charge support require two consecutive
SBMC calls to switch charge_types. Hence, a mutex is required.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Ike Panhc <ikepanhc@gmail.com>
Link: https://patch.msgid.link/20251105182832.104946-3-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enable Wildcat Lake platforms to achieve PMC information from
Intel PMC SSRAM Telemetry driver and substate requirements data
from telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251105215020.1984036-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete a redundant variable reassignment.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/90a2385c-9d19-46f2-8d31-618d5c10aa91@web.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete a redundant variable reassignment.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/b25c9842-7ebc-43f0-a411-8098359f81a6@web.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A user reported that the config of the PH16-72 also works on
the PHN16-72. Add support for this new device as well.
Suggested-by: Fa-Iz Faadhillah Ibrahim <faiz.faadhillah@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251016180008.465593-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Both machines support the necessary WMI methods, so enable fan control
for them.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251016180008.465593-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for controlling the fan speed using the
SetGamingFanSpeed() and GetGamingFanSpeed() WMI methods.
This feature is only enabled if the machine has ACER_CAP_PWM enabled
and depend on ACER_CAP_HWMON for detecting the number of available
fans.
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251016180008.465593-3-W_Armin@gmx.de
[ij: if nested inside else block -> else if]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After studying the linuwu_sense driver
(https://github.com/0x7375646F/Linuwu-Sense) i was able to understand
the meaning of the SetGamingFanBehavior() WMI method:
- the first 16-bit are a bitmap of all fans affected by a fan behavior
change request.
- the next 8 bits contain four fan mode fields (2-bit), each being
associated with a bit inside the fan bitmap.
There are three fan modes: auto, turbo and custom.
Use this newfound knowledge to fix the turbo fan handling by setting
the correct bits before calling SetGamingFanBehavior(). Also check
the result of the WMI method call and return an error should the ACPI
firmware signal failure.
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251016180008.465593-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove has_die_c6 variable from the pmc_dev struct. This variable
is unnecessary as the availability of die C6 could be inferred by
the punit_ep variable.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251014214548.629023-7-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Relocate the lpm_req_guid field from pmc_info to pmc_reg_map. The
previous implementation stored lpm_req_guid in pmc_info and relied
on pmc_core_find_guid() to retrieve the correct GUID, which was
unnecessary. Since lpm_req_guid is specific to PMC, pmc_reg_map is
a more appropriate location for this information.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251014214548.629023-6-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename all PMC index variables to pmc_idx in core.c. This improves
code readability and consistency.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251014214548.629023-5-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Arrow Lake U/H platforms may have multiple GUIDs pointing to the
same telemetry region. Add the second possible GUID to the GUID
list to support the Arrow Lake U/H platforms with this GUID.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251014214548.629023-4-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enable support for multiple DMU GUIDs to accommodate Arrow
Lake H/U platforms. Arrow Lake U/H may have several GUIDs
pointing to a single telemetry region providing die C6 value
Add support to search for available GUIDs.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251014214548.629023-3-xi.pardee@linux.intel.com
[ij: add include & reverse logic in a loop]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update ARL_PMT_DMU_GUID value. Arrow Lake PMT DMU GUID has been updated
after it was add to the driver. This updates ensures that the die C6
value is available in the debug filesystem.
Bugzilla Link: https://bugzilla.kernel.org/show_bug.cgi?id=220421
Fixes: 83f168a1a4 ("platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver")
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251014214548.629023-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The amd_num_nodes() function returns the number of data fabrics present.
On older EPYC processors, there was one data fabric per socket.
However, newer EPYC processors have more than one data fabric per
socket, leading to a situation where the number of sockets is not equal
to the number of data fabrics. Therefore, it is appropriate to use
topology_max_packages() to know the number of sockets in the system.
Also remove node.h header inclusion and socket number comparison against
data fabric nodes.
plat.c is supported only for legacy platforms where socket number and
data fabric numbers are same. So it can remain unchanged.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Link: https://patch.msgid.link/20250916043736.3279947-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Various LG notebooks have a special field called "HDAP" inside
the ACPI operation region handled by the lg-laptop driver:
Field (XIN1, AnyAcc, Lock, Preserve)
{
DMSG, 8,
HDAP, 8,
Offset (0x10),
P80B, 8,
P81B, 8,
P82B, 8,
P83B, 8,
P84B, 8,
P85B, 8,
P86B, 8,
P87B, 8,
Offset (0x3E8),
PMSG, 1600
}
This field is set to 1/0 when the HD audio device is enabled/disabled
using the _PS0/_PS3 ACPI control methods. Add support for this field
to avoid printing warning messages when AML bytecode writes data
into it.
Reported-by: Peter Chubb <peter@chubb.wattle.id.au>
Tested-by: Peter Chubb <peter@chubb.wattle.id.au>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251008064112.5981-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The coccicheck tool reports the following warning for this driver:
./hfi.c:509:3-8: No need to set .owner here. The core will do it.
The manual assignment of .owner = THIS_MODULE; in the platform_driver
struct is redundant. The platform_driver_register() function, which is
called to register the driver, is a macro that automatically sets the
driver's owner to THIS_MODULE.
The driver core handles this assignment internally, making the explicit
initialization in the struct definition unnecessary. Remove the
unnecessary line.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20251011063837.2318535-3-visitorckw@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The cpus field within the struct amd_hfi_cpuinfo was allocated and set
in the amd_hfi_online() CPU hotplug callback, and subsequently freed in
the amd_hfi_offline() callback.
However, after being initialized, this cpumask was never read or used
for any purpose within the driver. It represents dead code that serves
no functional role.
This change has no impact on the driver's functionality as the removed
code was entirely superfluous.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251011063837.2318535-2-visitorckw@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
