commit cdd0f118ef upstream.
vpu_get_plat_device() increases the reference count of the returned
platform device. However, when devm_kzalloc() fails, the reference
is not released, causing a reference leak.
Fix this by calling put_device() on fw_pdev->dev before returning
on the error path.
Fixes: e25a89f743 ("media: mtk-vcodec: potential dereference of null pointer")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5844227e0 upstream.
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock.
Fixes: 6467cda18c ("media: mediatek: vcodec: adding lock to protect decoder context list")
Fixes: afaaf3a0f6 ("media: mediatek: vcodec: adding lock to protect encoder context list")
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ef6e4db15 upstream.
Commit 0af46fbc33 ("media: i2c: imx219: Calculate crop rectangle
dynamically") meant that the 1920x1080 mode switched from using no
binning to using vertical binning but no horizontal binning, which
resulted in stretched pixels.
Until proper controls are available to independently select horizontal
and vertical binning, restore the original 1:1 pixel aspect ratio by
forcing binning to be uniform in both directions.
Cc: stable@vger.kernel.org
Fixes: 0af46fbc33 ("media: i2c: imx219: Calculate crop rectangle dynamically")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
[Add comment & reword commit message]
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e66a5cc606 upstream.
The delayed_work delayed_work_enable_hotplug is initialized with
INIT_DELAYED_WORK() in adv7842_probe(), but it is never scheduled
anywhere in the probe function.
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path and adjust the goto label accordingly to simplify the code
and avoid potential confusion.
Fixes: a89bcd4c6c ("[media] adv7842: add new video decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f34f24355 upstream.
The delayed_work delayed_work_enable_hotplug is initialized with
INIT_DELAYED_WORK() in adv76xx_probe(), but it is never scheduled
anywhere in the probe function.
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path and adjust the goto label accordingly to simplify the code
and avoid potential confusion.
Fixes: 54450f591c ("[media] adv7604: driver for the Analog Devices ADV7604 video decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae246b0032 upstream.
To avoid accessing the VPU register after release of the VPU core,
cancel the message work and destroy the workqueue that handles the
VPU message before release of the VPU core.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 634c2cd17b upstream.
Currently the function vpu_vb_is_codecconfig() always returns 0.
Delete it and its related code.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59ca64bf98 upstream.
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init.
Note that commit ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section
mismatch warning") incorrectly suppressed the modpost warning.
Fixes: ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section mismatch warning")
Fixes: e7332e3a55 ("V4L/DVB (12176): davinci/vpif_display: Add VPIF display driver")
Cc: stable@vger.kernel.org # 2.6.32
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ef8411137 upstream.
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init.
Note that commit ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section
mismatch warning") incorrectly suppressed the modpost warning.
Fixes: ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section mismatch warning")
Fixes: 6ffefff5a9 ("V4L/DVB (12906c): V4L : vpif capture driver for DM6467")
Cc: stable@vger.kernel.org # 2.6.32
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94de23a9aa upstream.
In vb2_dc_alloc(), get_device() is called to increment the device
reference count. However, if subsequent DMA allocation fails
(vb2_dc_alloc_coherent or vb2_dc_alloc_non_coherent returns error),
the function returns without calling put_device(), causing a device
reference leak.
Add put_device() call in the error path before kfree() to properly
release the device reference acquired earlier.
Fixes: de27891f67 ("media: videobuf2: handle non-contiguous DMA allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47825b1646 upstream.
Fix the Hantro G2 HEVC decoder so that we use DPB index 0 whenever a
ninvalid index is received from user space. This protects the hardware
from doing faulty memory access which then leads to bus errors.
To be noted that when a reference is missing, userspace such as GStreamer
passes an invalid DPB index of 255. This issue was found by seeking to a
CRA picture using GStreamer. The framework is currently missing the code
to skip over RASL pictures placed after the CRA. This situation can also
occur while doing live streaming over lossy transport.
Fixes: cb5dd5a0fa ("media: hantro: Introduce G2/HEVC decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29de195ca3 upstream.
The delayed_work delayed_work_enable_hpd is initialized with
INIT_DELAYED_WORK(), but it is never scheduled in tda1997x_probe().
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path in tda1997x_probe() to avoid potential confusion.
Fixes: 9ac0038db9 ("media: i2c: Add TDA1997x HDMI receiver driver")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17dc8ccd6d upstream.
v4l2_device_register_subdev_nodes() must called without taking
media_dev->graph_mutex to avoid potential AB-BA deadlock on further
subdevice driver initialization.
Fixes: fa91f1056f ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 445e165889 upstream.
The function calls of_parse_phandle() which returns
a device node with an incremented reference count. When the bonded device
is not available, the function
returns NULL without releasing the reference, causing a reference leak.
Add of_node_put(np) to release the device node reference.
The of_node_put function handles NULL pointers.
Found through static analysis by reviewing the doc of of_parse_phandle()
and cross-checking its usage patterns across the codebase.
Fixes: 7625ee981a ("[media] media: platform: rcar_drif: Add DRIF support")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f6f3aa215 upstream.
Make sure to drop the references taken when looking up the subsys
devices during probe on probe failure (e.g. probe deferral) and on
driver unbind.
Similarly, drop the SCP device reference after retrieving its platform
data during probe to avoid leaking it.
Note that holding a reference to a device does not prevent its driver
data from going away.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Cc: stable@vger.kernel.org # 6.1
Cc: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2bceb2e20 upstream.
It's possible for max1 to remain -1 if msp_read() always fail. This
variable is further used as index for accessing arrays.
Fix that by checking max1 prior to array accesses.
It seems that restart is the preferable action in case of out-of-bounds
value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8a4b275f9c ("V4L/DVB (3427): audmode and rxsubchans fixes (VIDIOC_G/S_TUNER)")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aec75e355c upstream.
Improve the condition used to determine when input internal buffers need
to be reconfigured during streamon on the capture port. Previously, the
check relied on the INPUT_PAUSE sub-state, which was also being set
during seek operations. This led to input buffers being queued multiple
times to the firmware, causing session errors due to duplicate buffer
submissions.
This change introduces a more accurate check using the FIRST_IPSC and
DRC sub-states to ensure that input buffer reconfiguration is triggered
only during resolution change scenarios, such as streamoff/on on the
capture port. This avoids duplicate buffer queuing during seek
operations.
Fixes: c1f8b2cc72 ("media: iris: handle streamoff/on from client in dynamic resolution change")
Cc: stable@vger.kernel.org
Reported-by: Val Packett <val@packett.cool>
Closes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4700
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c43bcd2b2a upstream.
In cec_devnode_init(), the debugfs directory created with
debugfs_create_dir() is not removed if bus_register() fails.
This leaves a stale "cec" entry in debugfs and prevents
proper module reloading.
Fix this by removing the debugfs directory in the error path.
Fixes: a56960e8b4 ("[media] cec: add HDMI CEC framework (core)")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0155e868cb upstream.
The variables were never clamped because the return value of clamp_val()
was not used. Fix this by assigning the clamped values, and use clamp()
instead of clamp_val().
Cc: stable@vger.kernel.org
Fixes: 3f16ff608a ("[ARM] pxafb: cleanup of the timing checking code")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3f44742bb upstream.
While debuggigng why X would not start on mips64 Sgi/O2 I found the
phys adress being off. Turns out the gbefb passed the internal
dma_addr as phys. May be broken pre git history. Fix by converting
dma_to_phys.
Signed-off-by: René Rebe <rene@exactco.de>
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13ea55ea20 upstream.
Segment info indexing also used sizeof(struct) instead of the
4K metadata stride, so info_index could point between slots and
subsequent writes would advance incorrectly. Derive info_index
from the pointer returned by the segment meta search using
PCACHE_SEG_INFO_SIZE and advance to the next slot for future
updates.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Zheng Gu <cengku@gmail.com>
Cc: stable@vger.kernel.org # 6.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee76331783 upstream.
The on-media cache_info index used sizeof(struct) instead of the
4K metadata stride, so gc_percent updates from dmsetup message
were written between slots and lost after reboot. Use
PCACHE_CACHE_INFO_SIZE in get_cache_info_addr() and align
info_index with the slot returned by pcache_meta_find_latest().
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Zheng Gu <cengku@gmail.com>
Cc: stable@vger.kernel.org # 6.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0ac06ae53 upstream.
There may be devices with physical block size larger than 4k.
If dm-bufio sends I/O that is not aligned on physical block size,
performance is degraded.
The 4k minimum alignment limit is there because some SSDs report logical
and physical block size 512 despite having 4k internally - so dm-bufio
shouldn't send I/Os not aligned on 4k boundary, because they perform
badly (the SSD does read-modify-write for them).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fa3e7d114 upstream.
When performing a read-modify-write(RMW) operation, any modification
to a buffered block must cause the entire buffer to be marked dirty.
Marking only a subrange as dirty is incorrect because the underlying
device block size(ubs) defines the minimum read/write granularity. A
lower device can perform I/O only on regions which are fully aligned
and sized to ubs.
This change ensures that write-back operations always occur in full
ubs-sized chunks, matching the intended emulation semantics of the
EBS target.
As for user space visible impact, submitting sub-ubs and misaligned
I/O for devices which are tuned to ubs sizes only, will reject such
requests, therefore it can lead to losing data. Example:
1) Create a 8K nvme device in qemu by adding
-device nvme,drive=drv0,serial=foo,logical_block_size=8192,physical_block_size=8192
2) Setup dm-ebs to emulate 512B to 8K mapping
urezki@pc638:~/bin$ cat dmsetup.sh
lower=/dev/nvme0n1
len=$(blockdev --getsz "$lower")
echo "0 $len ebs $lower 0 1 16" | dmsetup create nvme-8k
urezki@pc638:~/bin$
offset 0, ebs=1 and ubs=16(in sectors).
3) Create an ext4 filesystem(default 4K block size)
urezki@pc638:~/bin$ sudo mkfs.ext4 -F /dev/dm-0
mke2fs 1.47.0 (5-Feb-2023)
Discarding device blocks: done
Creating filesystem with 2072576 4k blocks and 518144 inodes
Filesystem UUID: bd0b6ca6-0506-4e31-86da-8d22c9d50b63
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: mkfs.ext4: Input/output error while writing out and closing file system
urezki@pc638:~/bin$ dmesg
<snip>
[ 1618.875449] buffer_io_error: 1028 callbacks suppressed
[ 1618.875456] Buffer I/O error on dev dm-0, logical block 0, lost async page write
[ 1618.875527] Buffer I/O error on dev dm-0, logical block 1, lost async page write
[ 1618.875602] Buffer I/O error on dev dm-0, logical block 2, lost async page write
[ 1618.875620] Buffer I/O error on dev dm-0, logical block 3, lost async page write
[ 1618.875639] Buffer I/O error on dev dm-0, logical block 4, lost async page write
[ 1618.894316] Buffer I/O error on dev dm-0, logical block 5, lost async page write
[ 1618.894358] Buffer I/O error on dev dm-0, logical block 6, lost async page write
[ 1618.894380] Buffer I/O error on dev dm-0, logical block 7, lost async page write
[ 1618.894405] Buffer I/O error on dev dm-0, logical block 8, lost async page write
[ 1618.894427] Buffer I/O error on dev dm-0, logical block 9, lost async page write
<snip>
Many I/O errors because the lower 8K device rejects sub-ubs/misaligned
requests.
with a patch:
urezki@pc638:~/bin$ sudo mkfs.ext4 -F /dev/dm-0
mke2fs 1.47.0 (5-Feb-2023)
Discarding device blocks: done
Creating filesystem with 2072576 4k blocks and 518144 inodes
Filesystem UUID: 9b54f44f-ef55-4bd4-9e40-c8b775a616ac
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
urezki@pc638:~/bin$ sudo mount /dev/dm-0 /mnt/
urezki@pc638:~/bin$ ls -al /mnt/
total 24
drwxr-xr-x 3 root root 4096 Oct 17 15:13 .
drwxr-xr-x 19 root root 4096 Jul 10 19:42 ..
drwx------ 2 root root 16384 Oct 17 15:13 lost+found
urezki@pc638:~/bin$
After this change: mkfs completes; mount succeeds.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85f96cbbbc upstream.
Add mutex lock to stratix10_svc_allocate_memory and
stratix10_svc_free_memory for thread safety. This prevents race
conditions and ensures proper synchronization during memory operations.
This is required for parallel communication with the Stratix10 service
channel.
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8163419e3e upstream.
It's possible for cp_read() and hdmi_read() to return -EIO. Those
values are further used as indexes for accessing arrays.
Fix that by checking return values where it's needed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a89bcd4c6c ("[media] adv7842: add new video decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc6bcf9ac4 upstream.
Patch series "powerpc/pseries/cmm: two smaller fixes".
Two smaller fixes identified while doing a bigger rework.
This patch (of 2):
We always have to initialize the balloon_dev_info, even when compaction is
not configured in: otherwise the containing list and the lock are left
uninitialized.
Likely not many such configs exist in practice, but let's CC stable to
be sure.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-1-david@redhat.com
Link: https://lkml.kernel.org/r/20251021100606.148294-2-david@redhat.com
Fixes: fe030c9b85 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0da2ba35c0 upstream.
Let's properly adjust BALLOON_MIGRATE like the other drivers.
Note that the INFLATE/DEFLATE events are triggered from the core when
enqueueing/dequeueing pages.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-3-david@redhat.com
Fixes: fe030c9b85 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cb053ea2e upstream.
MAX77705 charger is most likely always a single device on the board,
however nothing stops board designers to have two of them, thus same
device driver could probe twice. Or user could manually try to probing
second time.
Device driver is not ready for that case, because it allocates
statically 'struct regmap_irq_chip' as non-const and stores during
probe in 'irq_drv_data' member a pointer to per-probe state
container ('struct max77705_charger_data'). devm_regmap_add_irq_chip()
does not make a copy of 'struct regmap_irq_chip' but stores the pointer.
Second probe - either successful or failure - would overwrite the
'irq_drv_data' from previous device probe, so interrupts would be
executed in a wrong context.
Fixes: a6a494c8e3 ("power: supply: max77705: Add charger driver for Maxim 77705")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023102905.71535-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eff0306b10 upstream.
First of all, the driver was parsing the 'dbi' register region as 'elbi'.
This was due to DT mistakenly passing 'dbi' as 'elbi'. Since the DT is
now fixed to supply 'dbi' region, this driver can rely on the DWC core
driver to parse and map it.
However, to support the old DTs, if the 'elbi' region is found in DT, parse
and map the region as both 'dw_pcie::elbi_base' as 'dw_pcie::dbi_base'.
This will allow the driver to work with both broken and fixed DTs.
Also, skip parsing the 'elbi' region in DWC core if 'pci->elbi_base' was
already populated.
Fixes: 9c0ef6d34f ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Fixes: c96992a24b ("PCI: dwc: Add support for ELBI resource mapping")
Reported-by: Linnaea Lavia <linnaea-von-lavia@live.com>
Closes: https://lore.kernel.org/linux-pci/DM4PR05MB102707B8CDF84D776C39F22F2C7F0A@DM4PR05MB10270.namprd05.prod.outlook.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on Bananapi-M2S
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org # 6.2
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-3-c50dcc56ed6a@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9583f9d229 upstream.
caab002d50 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in
PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb).
But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S
directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are
Linux-created values that only coincidentally matched the PCIe spec.
b478e162f2 ("PCI/ASPM: Consolidate link state defines") later changed
them so they no longer matched the PCIe spec, so the bits ended up in the
wrong place in PCI_EXP_LNKCAP.
Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an
'aspm-no-l0s' property. Rely on brcmstb hardware to advertise L0s and/or
L1 support otherwise.
Fixes: caab002d50 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/linux-pci/20250925194424.GA2197200@bhelgaas
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded subject and description, added closes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251003170436.1446030-1-james.quinlan@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fb1d3ce3e upstream.
When the kernel leaves to userspace via syscall_restore_rfi(), the
W bit is not set in the new PSW. This doesn't cause any problems
because there's no 64 bit userspace for parisc. Simple static binaries
are usually loaded at addresses way below the 32 bit limit so the W bit
doesn't matter.
Fix this by setting the W bit when TIF_32BIT is not set.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1aa4524c0c upstream.
In wide mode, the IASQ contain the upper part of the GVA
during interruption. This needs to be reversed before
the space is used - otherwise it contains parts of IAOQ.
See Page 2-13 "Processing Resources / Interruption Instruction
Address Queues" in the Parisc 2.0 Architecture Manual page 2-13
for an explanation.
The IAOQ/IASQ space_adjust was skipped for other interruptions
than itlb misses. However, the code in handle_interruption()
checks whether iasq[0] contains a valid space. Due to the not
masked out bits this match failed and the process was killed.
Also add space_adjust for IAOQ1/IASQ1 so ptregs contains sane values.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 511b3b644e upstream.
For DMA initialization to work across all EPC drivers, the DMA
initialization has to be done in the .init() callback.
This is because not all EPC drivers will have a refclock (which is often
needed to access registers of a DMA controller embedded in a PCIe
controller) at the time the .bind() callback is called.
However, all EPC drivers are guaranteed to have a refclock by the time
the .init() callback is called.
Thus, move the DMA initialization to the .init() callback.
This change was already done for other EPF drivers in
commit 60bd3e039a ("PCI: endpoint: pci-epf-{mhi/test}: Move DMA
initialization to EPC init callback").
Cc: stable@vger.kernel.org
Fixes: 0faa0fe6f9 ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3e8e176ca upstream.
Mike noted that when NFSD responds to an NFS_FILE_SYNC WRITE, it
does not also persist file time stamps. To wit, Section 18.32.3
of RFC 8881 mandates:
> The client specifies with the stable parameter the method of how
> the data is to be processed by the server. If stable is
> FILE_SYNC4, the server MUST commit the data written plus all file
> system metadata to stable storage before returning results. This
> corresponds to the NFSv2 protocol semantics. Any other behavior
> constitutes a protocol violation. If stable is DATA_SYNC4, then
> the server MUST commit all of the data to stable storage and
> enough of the metadata to retrieve the data before returning.
Commit 3f3503adb3 ("NFSD: Use vfs_iocb_iter_write()") replaced:
- flags |= RWF_SYNC;
with:
+ kiocb.ki_flags |= IOCB_DSYNC;
which appears to be correct given:
if (flags & RWF_SYNC)
kiocb_flags |= IOCB_DSYNC;
in kiocb_set_rw_flags(). However the author of that commit did not
appreciate that the previous line in kiocb_set_rw_flags() results
in IOCB_SYNC also being set:
kiocb_flags |= (__force int) (flags & RWF_SUPPORTED);
RWF_SUPPORTED contains RWF_SYNC, and RWF_SYNC is the same bit as
IOCB_SYNC. Reviewers at the time did not catch the omission.
Reported-by: Mike Snitzer <snitzer@kernel.org>
Closes: https://lore.kernel.org/linux-nfs/20251018005431.3403-1-cel@kernel.org/T/#t
Fixes: 3f3503adb3 ("NFSD: Use vfs_iocb_iter_write()")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 604cf6a401 upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1df1fdbc7e upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f21d2c7d37 upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71c239348d upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a607e676c8 upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aee8c4d9d4 upstream.
This chip must be described as none of the block protection information
are discoverable. This chip supports 4 bits plus the top/bottom
addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64ef5f454e upstream.
Commit 5c2f7727d4 ("mtd: mtdpart: check for subpartitions parsing
result") introduced some kind of regression with parser on subpartitions
where if a parser emits an error then the entire parsing process from the
upper parser fails and partitions are deleted.
Not checking for error in subpartitions was originally intended as
special parser can emit error also in the case of the partition not
correctly init (for example a wiped partition) or special case where the
partition should be skipped due to some ENV variables externally
provided (from bootloader for example)
One example case is the TRX partition where, in the context of a wiped
partition, returns a -ENOENT as the trx_magic is not found in the
expected TRX header (as the partition is wiped)
To better handle this and still keep some kind of error tracking (for
example to catch -ENOMEM errors or -EINVAL errors), permit parser on
subpartition to emit -ENOENT error, print a debug log and skip them
accordingly.
This results in giving better tracking of the status of the parser
(instead of returning just 0, dropping any kind of signal that there is
something wrong with the parser) and to some degree restore the original
logic of the subpartitions parse.
(worth to notice that some special partition might have all the special
header present for the parser and declare 0 partition in it, this is why
it would be wrong to simply return 0 in the case of a special partition
that is NOT init for the scanning parser)
Cc: stable@vger.kernel.org
Fixes: 5c2f7727d4 ("mtd: mtdpart: check for subpartitions parsing result")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec9d588391 upstream.
During upstreaming the order of clocks was adjusted to match the
upstream sort order, but mistakently freq-table-hz wasn't re-ordered
with the new order.
Fix that by moving the entry for the ICE clk to the last place.
Fixes: 5a814af5fc ("arm64: dts: qcom: sm6350: Add UFS nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251023-sm6350-ufs-things-v3-1-b68b74e29d35@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22f0ae971c upstream.
In order to set the AMCR register, which configures the
memory-region split between ospi1 and ospi2, we need to
identify the ospi instance.
By using memory-region-names, it allows to identify the
ospi instance this memory-region belongs to.
Fixes: cad2492de9 ("arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20251031-upstream_fix_dts_omm-v4-1-e4a059a50074@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19c286b755 upstream.
In some seek stress tests, we are getting IRQ from the G2 decoder where
the dec_bus_int and the dec_e bits are high, meaning the decoder is
still running despite the error.
Fix this by reworking the IRQ handler to only finish the job once we
have reached completion and move the software reset to when our software
watchdog triggers.
This way, we let the hardware continue on errors when it did not self
reset and in worse case scenario the hardware timeout will
automatically stop it. The actual error will be fixed in a follow up
patch.
Fixes: 3385c514ec ("media: hantro: Convert imx8m_vpu_g2_irq to helper")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1240abf4b7 upstream.
The driver calls reset_control_get_optional_exclusive() but never calls
reset_control_put() in error paths or in the remove function. This causes
a resource leak when probe fails after successfully acquiring the reset
control, or when the driver is unloaded.
Switch to devm_reset_control_get_optional_exclusive() to automatically
manage the reset control resource.
Fixes: a4b80242d0 ("media: st-rc: explicitly request exclusive reset control")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
