The NMI infrastructure cannot currently be used in loadable modules:
ERROR: modpost: "free_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined!
ERROR: modpost: "request_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined!
ERROR: modpost: "enable_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined!
Disable this for now to make allmodconfig build again. We may revisit
this and export those symbols instead in the future.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Register the NMI/IRQ corresponding to the A64FX's device definition
dedicated to diagnostic interrupts, so that when this interrupt is
sent using the BMC, it causes a panic. This can be used to obtain
a kernel dump.
Signed-off-by: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Link: https://lore.kernel.org/r/20220520074119.3574753-2-hasegawa-hitomi@fujitsu.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
-----BEGIN PGP SIGNATURE-----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=AHeW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=0Kp7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.20
This introduces a new driver that requests interconnect bandwidth based
on throughput measurements of the bwmon hardware blocks found associated
with, among other things, the CPU subsystem on many Qualcomm platforms.
It introduces support for the SCM wrapper driver to vote for
interconnect bandwidth for operations that needs bandwidth to the crypto
engine. This ensures both performance and guards against issues caused
by lacking votes for this path.
The socinfo driver gains knowledge about the SC7180P SoC.
It contains a range of fixes for spelling mistakes, refcount leaks in
various drivers and removes some redundant code from the apr remove
path.
The SCM DT bindings are updated to declare support for QCS404, SM6125
and SDX65.
The command db driver has a strncpy() converted to strscpy_pad() and
then back again with proper documentation to why this was the right API.
* tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: icc-bwmon: Add bandwidth monitoring driver
dt-bindings: interconnect: qcom,msm8998-cpu-bwmon: add BWMON device
soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
soc: qcom: llcc: Fix syntax errors in comments
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem
dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
firmware: qcom_scm: Add bw voting support to the SCM interface
dt-bindings: firmware: qcom-scm: Add interconnects property
soc: qcom: cmd-db: replace strscpy_pad() with strncpy()
dt-bindings: firmware: scm: Add compatible for SDX65
dt-bindings: arm: qcom: switch maintainer to Bjorn
soc: qcom: rpmhpd: fix typos in comment
soc: qcom: correct kerneldoc
soc: qcom: cmd-db: replace strncpy() with strscpy_pad()
firmware: qcom_scm-legacy: correct kerneldoc
dt-bindings: firmware: document Qualcomm QCS404 and SM6125 SCM
soc: qcom: apr: Drop redundant check in .remove()
firmware: qcom_scm: drop unexpected word "the"
soc: qcom: socinfo: Add an ID for sc7180P
Link: https://lore.kernel.org/r/20220712021830.1271398-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pull the following:
- Julia fixes a typo in the Broadcom STB legacy power management code
- Liang fixes a device_node reference count leak in the Broadcom STB BIU
driver code error path(s)
- Nicolas and Stefan provide updates to the BCM2835 power management
driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the
use of the V3D GPU driver on such platforms. This is a merge of an
immutable branch from Lee Jones' MFD tree
- William removes the use of CONFIG_ARCH_BCM_63XX which is removed and
replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of
the DSL/PON SoCs from Broadcom are now supported in the upstream
kernel.
-----BEGIN PGP SIGNATURE-----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=O/9g
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yTZT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom SoC drivers updatse for 5.20, please
pull the following:
- Julia fixes a typo in the Broadcom STB legacy power management code
- Liang fixes a device_node reference count leak in the Broadcom STB BIU
driver code error path(s)
- Nicolas and Stefan provide updates to the BCM2835 power management
driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the
use of the V3D GPU driver on such platforms. This is a merge of an
immutable branch from Lee Jones' MFD tree
- William removes the use of CONFIG_ARCH_BCM_63XX which is removed and
replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of
the DSL/PON SoCs from Broadcom are now supported in the upstream
kernel.
* tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux:
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
soc: bcm: bcm2835-power: Bypass power_on/off() calls
soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
soc: bcm: bcm2835-power: Resolve ASB register macros
soc: bcm: bcm2835-power: Refactor ASB control
mfd: bcm2835-pm: Add support for BCM2711
mfd: bcm2835-pm: Use 'reg-names' to get resources
soc: bcm: brcmstb: biuctrl: Add missing of_node_put()
soc: bcm: brcmstb: pm: pm-arm: fix typo in comment
Link: https://lore.kernel.org/r/20220711164451.3542127-6-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update imx8m-blk-ctrl driver to print the name of the power domain,
so that the error message becomes more useful.
- Update the error messages in gpcv2 driver by printing the reason why
a regulator fails to be enabled or disabled.
- A series from Michael Walle to convert the guts driver from a platform
driver to an core_initcall for getting rid of all those global static
variables.
- A couple of follow-up fixes on guts driver series.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmLJJY8UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM54iAgAjX40h6w2DOOyVZhM6VGBHmQIzfok
MiVRjPVLsEf55brvG6IwY4KnWWCOb9bcET7JxBhYsreUsLAC8255B//mLoiLZM4x
XfCFIaQ9XxnCyfzrJuXr1K0TuwlxVYAbVghcxYFpgCSpM9GwChhQstu1dgfQE3o3
p8OXlVol3bu0NN5JkbKd2t7e9P2EoCBIb9N2JIjnlxs81W63hoKEhRkhPd2CKBIN
gKEHrMf3CFFuLpSvwKKsNzwBj2y6LML413k9l7Wp5L/MEX0+Y0G/fuQ3i2fbzoDQ
OF2SQfngaeSRy8kbp1iZ+GCqfGGoBjwinZ7v2tYElH0pheR074mxIjKntQ==
=vt6q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FQvj
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.20:
- Update imx8m-blk-ctrl driver to print the name of the power domain,
so that the error message becomes more useful.
- Update the error messages in gpcv2 driver by printing the reason why
a regulator fails to be enabled or disabled.
- A series from Michael Walle to convert the guts driver from a platform
driver to an core_initcall for getting rid of all those global static
variables.
- A couple of follow-up fixes on guts driver series.
* tag 'imx-drivers-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: fsl: guts: check return value after calling of_iomap() in fsl_guts_get_soc_uid()
soc: fsl: guts: fix return value check in fsl_guts_init()
soc: imx: imx8m-blk-ctrl: Make error prints useful
soc: fsl: guts: add serial_number support
soc: fsl: guts: drop platform driver
soc: fsl: guts: use of_root instead of own reference
soc: fsl: guts: allocate soc_dev_attr on the heap
soc: fsl: guts: embed fsl_guts_get_svr() in probe()
soc: fsl: guts: remove module_exit() and fsl_guts_remove()
soc: fsl: guts: machine variable might be unset
soc: imx: gpcv2: print errno for regulator errors
Link: https://lore.kernel.org/r/20220709082951.15123-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains a fix that avoids unaligned accesses to IPC memory, which in
turn helps in suppressing speculative reads from out-of-bounds memory.
Another patch performs some minor cleanup around debugfs API usage.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmLIeCwTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoX+JEACkEPqRF06QMQSYwX/b+aOYQwPciSn7
XRWY2Kap26uIovtGYGHc4LndcB4w8kgUtTxw6eHlO5eTb364XdRZd5IER0GjQK/o
+jx9EwcWxwPKT0zk949vC/5UzfxdXVUGwg2K846wmsATn6Jh8zJHmaz9WHPS+5Y0
UEtN4POucg5ehqlQ59zY/DHpE0xPwlmtiNpHeRvdjjjOPwGDrDE2FarJuOsdl4Nq
kFn6dINEzyXNKWSH9n9pI7Uu5Gac9MFpFMSQV5yXNUUW6ArQd6k0ANFrialEgpY4
gPXZH+J1kodEyeHvj+Dmsndu3yUUL95zDc5vxnnp0FUxb4flSR/JXPeglLUbqdL6
H/HAg6XOTMGbKr3KhRk7USTPZuAnkfyWZdPbKqdVlDuUiL47j6ZWqkA/Ne7zR1V+
e2fk5xY6doLm/nAj8ZtZwx3O7e1hDOswi6WlPYMqLj7Lrd1JRYAhw0CdPudcGbLT
0YrUzhY2VHshXQYqkEnb1rj207BAOc4kWho8ae2xLi5q6jLBRhTbuV504aybZRFe
LR8a7GEQXWB42+lZAdMk5TxzzKhsPas2vrVkaJKalqrmmVwwzERH8ZxvLs1OsfjO
OaoU5XWicCaXlznfoWIOTDVEWHAzgv6IW/+p2rDzMbKmIPYPFMV6vn38tbZ9RnKX
e9U0w6y7lqNUuQ==
=I1B3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=c0Uc
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.20-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.20-rc1
Contains a fix that avoids unaligned accesses to IPC memory, which in
turn helps in suppressing speculative reads from out-of-bounds memory.
Another patch performs some minor cleanup around debugfs API usage.
* tag 'tegra-for-5.20-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix error check return value of debugfs_create_file()
firmware: tegra: bpmp: Do only aligned access to IPC memory area
Link: https://lore.kernel.org/r/20220708185608.676474-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- code style improvements
devapc:
- add support for MT8186
Smart Voltage Scaling (SVS)
- add support for MT8183 and MT8192
MMSYS:
- Add more display paths for MT8365
Mutex:
- Add common interface for MOD and SOF table
- Add support for MDP on MT8183
- Move binding to soc folder
- Add support to use CMDQ to enable the mutex, needed by MDP3
Power domains:
- Add support for MT6795
-----BEGIN PGP SIGNATURE-----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=VZvg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=KbI7
-----END PGP SIGNATURE-----
Merge tag 'v5.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
pmic wrapper:
- code style improvements
devapc:
- add support for MT8186
Smart Voltage Scaling (SVS)
- add support for MT8183 and MT8192
MMSYS:
- Add more display paths for MT8365
Mutex:
- Add common interface for MOD and SOF table
- Add support for MDP on MT8183
- Move binding to soc folder
- Add support to use CMDQ to enable the mutex, needed by MDP3
Power domains:
- Add support for MT6795
* tag 'v5.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (29 commits)
soc: mediatek: mutex: Simplify with devm_platform_get_and_ioremap_resource()
soc: mediatek: pm-domains: Add support for Helio X10 MT6795
dt-bindings: power: Add MediaTek Helio X10 MT6795 power domains
soc: mediatek: SVS: Use DEFINE_SIMPLE_DEV_PM_OPS for svs_pm_ops
soc: mediatek: mtk-pm-domains: Allow probing vreg supply on two MFGs
soc: mediatek: fix missing clk_disable_unprepare() on err in svs_resume()
soc: mediatek: mutex: Use DDP_COMPONENT_DITHER0 mod index for MT8365
soc: mediatek: mutex: add functions that operate registers by CMDQ
dt-bindings: soc: mediatek: add gce-client-reg for MUTEX
dt-bindings: soc: mediatek: move out common module from display folder
soc: mediatek: mutex: add 8183 MUTEX MOD settings for MDP
soc: mediatek: mutex: add common interface for modules setting
soc: mediatek: pm-domains: Add support always on flag
soc: mediatek: mt8365-mmsys: add DPI/HDMI display path
soc: mediatek: mutex: add MT8365 support
soc: mediatek: SVS: add mt8192 SVS GPU driver
dt-bindings: soc: mediatek: add mt8192 svs dt-bindings
soc: mediatek: SVS: add debug commands
soc: mediatek: SVS: add monitor mode
soc: mediatek: SVS: introduce MTK SVS engine
...
Link: https://lore.kernel.org/r/b733bd82-6d99-23ef-0541-98e98eb8d3bc@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
SERIAL_BCM63XX depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
SPI_BCM63XX_HSSPI depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
CLK_BCM_63XX depending and setting default on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
PHY_BRCM_SATA depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
I2C_BRCMSTB depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
AHCI_BRCM depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
If an error occurs, debugfs_create_file() will return ERR_PTR(-ERROR),
so use IS_ERR() to check it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra234 has multiple network interfaces with each their own memory
clients and stream IDs to allow for proper isolation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
While at it, also remove a redundant call to of_address_to_resource(),
as this was getting the address of the same resource index 0: we can
as well get the iostart from the 'regs' pointer.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623121701.107512-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add power domains dt-bindings for MediaTek Helio X10 (MT6795).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220503141441.125852-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add device-tree binding documentation to represent the Control Backbone
(CBB) version 2.0 used on Tegra234 SoCs.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device-tree binding documentation to represent the AXI2APB bridges
used by Control Backbone (CBB) 1.0 on Tegra194 SoCs. All errors for APB
slaves are reported as slave error because APB bas single bit to report
error. So, CBB driver needs to further check error status registers of
all the AXI2APB bridges to find error type.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device-tree binding documentation to represent the Control Backbone
(CBB) version 1.0 used on Tegra194 SoCs.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the memory client and stream ID definitions for the MGBE hardware
found on Tegra234 SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the clocks and resets used by the MGBE Ethernet hardware found on
Tegra234 SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add power domain IDs for the four MGBE power partitions found on
Tegra234.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When building this driver for an architecture that does not support
CONFIG_PM_SLEEP, such as hexagon, the following warnings occur:
drivers/soc/mediatek/mtk-svs.c:1481:12: error: unused function 'svs_suspend' [-Werror,-Wunused-function]
static int svs_suspend(struct device *dev)
^
drivers/soc/mediatek/mtk-svs.c:1515:12: error: unused function 'svs_resume' [-Werror,-Wunused-function]
static int svs_resume(struct device *dev)
^
2 errors generated.
This happens because SIMPLE_DEV_PM_OPS uses SET_SYSTEM_SLEEP_PM_OPS,
which evaluates to nothing when CONFIG_PM_SLEEP is not set, leaving the
functions unused in the eyes of the compiler.
This problem was rectified in commit 1a3c7bb088 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones") with new macros. Use
DEFINE_SIMPLE_DEV_PM_OPS to fix the warning while not changing
svs_pm_ops when CONFIG_PM_SLEEP is set.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220622175649.1856337-1-nathan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MediaTek SoCs have multiple MFG power-domains, exclusively used for
the GPU which, in turn, requires external power supplies: make sure
to have the MTK_SCPD_DOMAIN_SUPPLY cap on the two topmost MFGs to
allow voting for regulators on/off upon usage of these power domains.
This also ensures that the SRAM is actually powered and that we're
not relying on the bootloader leaving this supply on when performing
the first (and latter) poweron sequence for these domains' sram.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623123850.110225-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The K3 AM62x family of SoC has one PRUSS-M instance and it has two
Programmable Real-Time Units (PRU0 and PRU1). This does not support
Industrial Communications Subsystem features like Ethernet.
The existing pruss platform driver has been updated to support this
through a new AM62x specific compatible.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220602120613.2175-4-kishon@ti.com
Update the PRUSS bindings for the PRUSSM instance present in
AM625 SoC.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602120613.2175-3-kishon@ti.com
Re-arrange "compatible" string in alphabetic order to decrease the
chance of conflicts.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602120613.2175-2-kishon@ti.com
Bandwidth monitoring (BWMON) sits between various subsytems like CPU,
GPU, Last Level caches and memory subsystem. The BWMON can be
configured to monitor the data throuhput between memory and other
subsytems. The throughput is measured within specified sampling window
and is used to vote for corresponding interconnect bandwidth.
Current implementation brings support for BWMON v4, used for example on
SDM845 to measure bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.
The driver was tested on SDM845.
Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-3-krzysztof.kozlowski@linaro.org
Add bindings for the Qualcomm Bandwidth Monitor device providing
performance data on interconnects. The bindings describe only BWMON CPU
(version 4), e.g. the instance which appeared for the first on Qualcomm
MSM8998 SoC and is also used on SDM845. This BWMON device sits between
CPU and Last Level Cache Controller.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-2-krzysztof.kozlowski@linaro.org
The main additions this time around are:
1. The capability to trace full SCMI message headers and payloads.
The recent unearthing of chain of old firmware issues motivated
this effort so that it is easier to trace them and debug quicker
than it took this time around in absence of such tracing.
2. SCMI System power control driver to handle platform's requests for a
graceful shutdown. Though the system power control protocol has been
around since the begining of SCMI, it lacked the timeout information
that was added in SCMI v3.1 that enables kernel to take appropriate
action within the timeout and doesn't have to rely on any other
user inputs(which was blocking factor for addition of this driver
earlier)
3. Support for SCMI Power Capping protocol that was introduced in SCMI v3.1
This protocol is intended for controlling and monitoring the power
consumption of power capping domains. The firmware also provides the
hierarchy of powercap domains by providing parent domain information.
It also contains a bug fix in the old SCPI driver addressing possible
user-after-free issues.
-----BEGIN PGP SIGNATURE-----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=qIgZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=eE2h
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm SCMI updates for v5.20
The main additions this time around are:
1. The capability to trace full SCMI message headers and payloads.
The recent unearthing of chain of old firmware issues motivated
this effort so that it is easier to trace them and debug quicker
than it took this time around in absence of such tracing.
2. SCMI System power control driver to handle platform's requests for a
graceful shutdown. Though the system power control protocol has been
around since the begining of SCMI, it lacked the timeout information
that was added in SCMI v3.1 that enables kernel to take appropriate
action within the timeout and doesn't have to rely on any other
user inputs(which was blocking factor for addition of this driver
earlier)
3. Support for SCMI Power Capping protocol that was introduced in SCMI v3.1
This protocol is intended for controlling and monitoring the power
consumption of power capping domains. The firmware also provides the
hierarchy of powercap domains by providing parent domain information.
It also contains a bug fix in the old SCPI driver addressing possible
user-after-free issues.
* tag 'scmi-updates-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use fast channel tracing
include: trace: Add SCMI fast channel tracing
firmware: arm_scmi: Add SCMI v3.1 powercap fast channels support
firmware: arm_scmi: Generalize the fast channel support
firmware: arm_scmi: Add SCMI v3.1 powercap protocol basic support
dt-bindings: firmware: arm,scmi: Add support for powercap protocol
firmware: arm_scmi: Add SCMI System Power Control driver
firmware: arm_scmi: Add devm_protocol_acquire helper
firmware: arm_scmi: Add SCMI v3.1 System Power extensions
firmware: arm_scmi: Support only one single system power device
firmware: arm_scmi: Use new SCMI full message tracing
include: trace: Add SCMI full message tracing
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks
Link: https://lore.kernel.org/r/20220706115045.2272678-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver exists as a workaround for old devicetrees which are missing
interconnects properties, so it is only useful for those specific
platforms, which all happen to be ARM or ARM64.
This solves the issue that the driver fails to build on RISC-V, where
PHYS_OFFSET is not defined.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702032520.22129-1-samuel@sholland.org
The driver uses generic genpd OF APIs and with a very minimal config
where nothing else selects them, this driver will not probe, as
of_genpd_add_provider_onecell will return -EOPNOTSUPP.
Make sure to select these in Kconfig to prevent that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701073700.17124-1-konrad.dybcio@somainline.org
of_iomap() may return NULL, so we need check the return value.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In case of error, of_iomap() returns NULL pointer not ERR_PTR().
The IS_ERR() test in the return value check should be replaced
with NULL test and return -ENOMEM as error value.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
All the currently defined SCMI events are meant to trace only regular SCMI
transfers based on SCMI messages exchanges; SCMI transactions based on
fast channels, where used, are completely invisible from the tracing point
of view.
Add support to trace fast channel transactions; while doing that avoid
exposing full shared memory location addresses.
Link: https://lore.kernel.org/r/20220704102241.2988447-6-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add SCMIv3.1 powercap protocol fast channel support using common helpers
provided by the SCMI core with scmi_proto_helpers_ops operations.
Link: https://lore.kernel.org/r/20220704102241.2988447-5-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Generalize existing fast channel support used in the perf protocol and
make it available to possibly any protocol refactoring the common code
into a couple of new scmi_proto_helpers_ops routines.
Make perf protocol use this new infrastructure.
No functional change.
Link: https://lore.kernel.org/r/20220704102241.2988447-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add support for SCMI v3.1 powercap protocol, with the exception of powercap
fast channels, exposing all the new related powercap protocol operations as
usual in include/linux/scmi_protocol.h.
Link: https://lore.kernel.org/r/20220704102241.2988447-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add an SCMI System Power control driver to handle platform's requests
carried by SYSTEM_POWER_STATE_NOTIFIER notifications: such platform
requested system-wide power state transitions are handled accordingly,
gracefully or forcefully, depending on the notifications' message flags.
Graceful requests are relayed to userspace using the same Kernel API used
to handle ACPI Shutdown bus events.
Link: https://lore.kernel.org/r/20220704101933.2981635-5-cristian.marussi@arm.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a method to get hold of a protocol, causing it to be initialized and
its resource accounting updated, without getting access to its operations
and handle.
Some protocols, like SCMI SystemPower, do not expose any protocol ops to
the kernel OSPM agent but still need to be at least initialized. This
helper avoids the need to invoke a full devm_get_protocol() only to get
the protocol initialized while throwing away unused the protocol ops and
handle.
Link: https://lore.kernel.org/r/20220704101933.2981635-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
