Commit graph

766,468 commits

Author SHA1 Message Date
Philipp Rudo
15ceb8c936 s390/kexec_file: Prepare setup.h for kexec_file_load
kexec_file_load needs to prepare the new kernels before they are loaded.
For that it has to know the offsets in head.S, e.g. to register the new
command line. Unfortunately there are no macros right now defining those
offsets. Define them now.

Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16 09:10:21 +02:00
Martin Schwidefsky
760dd0eeae s390/smsgiucv: disable SMSG on module unload
The module exit function of the smsgiucv module uses the incorrect CP
command to disable SMSG messages. The correct command is "SET SMSG OFF".
Use it.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16 09:10:17 +02:00
Vasily Gorbik
dccccd332d s390/sclp: avoid potential usage of uninitialized value
sclp_early_printk could be used before .bss section is zeroed
(i.e. from als.c during the decompressor phase), therefore values used
by sclp_early_printk should be located in the .data section.

Another reason for that is to avoid potential initrd corruption, if some
code in future would use sclp_early_printk before initrd is moved from
possibly overlapping with .bss section region to a safe location.

Fixes: 0b0d1173d8 ("s390/sclp: 32 bit event mask compatibility mode")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16 09:10:17 +02:00
Fabio Estevam
f9d7af0752 ARM: dts: imx53-tx53: Remove unneeded 'codec-handle' property
The 'codec-handle' property is an optional one and there is really
no need to be used here.

As per the comment in the fsl_ssi driver:

"Backward compatible for older bindings by manually triggering the
machine driver's probe()."

,so just remove such uneeded property.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-16 15:06:57 +08:00
Fabio Estevam
a2d0f54ed9 ARM: dts: imx25-pdk: Remove unneeded 'codec-handle' property
The 'codec-handle' property is an optional one and there is really
no need to be used here.

As per the comment in the fsl_ssi driver:

"Backward compatible for older bindings by manually triggering the
machine driver's probe()."

,so just remove such uneeded property.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-16 15:06:43 +08:00
Ingo Molnar
aacd188a2d perf/core improvements and fixes:
perf annotate:
 
 - Allow showing offsets in more than just jump targets, use the new
   'O' hotkey in the TUI, config ~/.perfconfig annotate.offset_level
   for it and for --stdio2 (Arnaldo Carvalho de Melo)
 
 - Use the resolved variable names from objdump disassembled lines to
   make them more compact, just like was already done for some instructions,
   like "mov", this eventually will be done more generally, but lets now add
   some more to the existing mechanism (Arnaldo Carvalho de Melo)
 
 perf record:
 
 - Change warning for missing topology sysfs entry to debug, as not all
   architectures have those files, s390 being one of those (Thomas Richter)
 
 perf sched:
 
 - Fix -g/--call-graph documentation (Takuya Yamamoto)
 
 perf stat:
 
 - Enable 1ms interval for printing event counters values in (Alexey Budankov)
 
 perf test:
 
 - Run dwarf unwind  on arm32 (Kim Phillips)
 
 - Remove unused ptrace.h include from LLVM test, sidesteping older
   clang's lack of support for some asm constructs (Arnaldo Carvalho de Melo)
 
 perf version:
 
 - Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version --build-options'
   when HAVE_SYSCALL_TABLE_SUPPORT is true, as libaudit won't be used in that
   case, print info about syscall_table support instead (Jin Yao)
 
 Build system:
 
 - Use HAVE_..._SUPPORT used consistently (Jin Yao)
 
 - Restore READ_ONCE() C++ compatibility in tools/include (Mark Rutland)
 
 - Give hints about package names needed to build jvmti (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlrQq1MACgkQ1lAW81NS
 qkCt3A/+N3Tq41g6zxvO5kIH/mnjCdZ6D1n+7qPOkBnmEPZhsyo6QCiYld3gHxaq
 kmOecRqKzdMx/4xDArdCXizw0iNWecAEa0vCk+A8qfEeBS9ZiditU+vqrzLhzbxr
 wHR1YA3oJSUeQzGmTbXgjjc2ySmfK7EJcBdP+diESXQIRkO6DfpPsxeR6UBoyGT+
 gWM5GvTRxa4P6hlVv+uEsdWDvziPIL7Uk/ykKJA6s2BVScvXog2uJqfzroYlqJWG
 TIEobGfU7zoLVuZtuj/8E8tncQwyNSX+BgFRiZxX5gHxv4VGG1q7D4ug302Q/ctU
 Dkted9+lL7W1cFcNOgsFJAm5TkaczGKFezRvVMVv6T9LCJbJIddRxG5LjKWPb1Gk
 ok242hlFzH2a1Sas7MQKRXnhaHxjjVUTKO6Vgq24AXoWgFWVyTdNtFL8D7FBkQfZ
 eL0S10mgUSG5n3WnfKeomgt2BqwTMURXEIwRnMv+er2hkmeBl80K9BbKBc8KyAAX
 CLn2bS35S/NXyX4Cin44gBYLPdbDjg7r8WDdtstIQsmF6SvofDtTCKlVhQL9++BH
 lOH+hPkwuai1eOXnhUgCd0pUbO5PmcKfpd2Tv5hOR3Xr6ATL7HEZ8k24Tl6r1T7T
 MAfz4lv/wUoX+Gx1xpxt/6+hAau+yNs2QW5i7Szk/NCMUSx/rlw=
 =mR6l
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.17-20180413' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull tooling improvements and fixes from Arnaldo Carvalho de Melo:

perf annotate fixes and improvements:

- Allow showing offsets in more than just jump targets, use the new
  'O' hotkey in the TUI, config ~/.perfconfig annotate.offset_level
  for it and for --stdio2 (Arnaldo Carvalho de Melo)

- Use the resolved variable names from objdump disassembled lines to
  make them more compact, just like was already done for some instructions,
  like "mov", this eventually will be done more generally, but lets now add
  some more to the existing mechanism (Arnaldo Carvalho de Melo)

perf record fixes:

- Change warning for missing topology sysfs entry to debug, as not all
  architectures have those files, s390 being one of those (Thomas Richter)

perf sched fixes:

- Fix -g/--call-graph documentation (Takuya Yamamoto)

perf stat:

- Enable 1ms interval for printing event counters values in (Alexey Budankov)

perf test fixes:

- Run dwarf unwind  on arm32 (Kim Phillips)

- Remove unused ptrace.h include from LLVM test, sidesteping older
  clang's lack of support for some asm constructs (Arnaldo Carvalho de Melo)

perf version fixes:

- Do not print info about HAVE_LIBAUDIT_SUPPORT in 'perf version --build-options'
  when HAVE_SYSCALL_TABLE_SUPPORT is true, as libaudit won't be used in that
  case, print info about syscall_table support instead (Jin Yao)

Build system fixes:

- Use HAVE_..._SUPPORT used consistently (Jin Yao)

- Restore READ_ONCE() C++ compatibility in tools/include (Mark Rutland)

- Give hints about package names needed to build jvmti (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-16 08:15:22 +02:00
Tetsuo Handa
8e04944f0e mm,vmscan: Allow preallocating memory for register_shrinker().
syzbot is catching so many bugs triggered by commit 9ee332d99e
("sget(): handle failures of register_shrinker()"). That commit expected
that calling kill_sb() from deactivate_locked_super() without successful
fill_super() is safe, but the reality was different; some callers assign
attributes which are needed for kill_sb() after sget() succeeds.

For example, [1] is a report where sb->s_mode (which seems to be either
FMODE_READ | FMODE_EXCL | FMODE_WRITE or FMODE_READ | FMODE_EXCL) is not
assigned unless sget() succeeds. But it does not worth complicate sget()
so that register_shrinker() failure path can safely call
kill_block_super() via kill_sb(). Making alloc_super() fail if memory
allocation for register_shrinker() failed is much simpler. Let's avoid
calling deactivate_locked_super() from sget_userns() by preallocating
memory for the shrinker and making register_shrinker() in sget_userns()
never fail.

[1] https://syzkaller.appspot.com/bug?id=588996a25a2587be2e3a54e8646728fb9cae44e7

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+5a170e19c963a2e0df79@syzkaller.appspotmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-16 02:06:47 -04:00
Steffen Klassert
b48c05ab5d xfrm: Fix warning in xfrm6_tunnel_net_exit.
We need to make sure that all states are really deleted
before we check that the state lists are empty. Otherwise
we trigger a warning.

Fixes: baeb0dbbb5 ("xfrm6_tunnel: exit_net cleanup check added")
Reported-and-tested-by:syzbot+777bf170a89e7b326405@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-04-16 07:50:09 +02:00
David Lechner
d1f94959bb ARM: dts: da850: use gpio-ranges
This makes use of the gpio-ranges feature that connects GPIO
controllers and PINMUX controllers.

In da850.dtsi, pinctrl-single,gpio-range is added to the pinmux node
and gpio-ranges is added to the GPIO node. Unfortunately, the way the
pinctrl-single driver enumerates the pins (starting with LSB) causes
them to be in reverse order compared to the way the gpios are assigned.
As a result, we have to declare the mapping for each GPIO individually.

This also lets us remove all of the GPIO pinmuxes from
da850-lego-ev3.dts. (Other da850 boards do not currently have any
GPIO pinmuxes declared.)

Acked-by: Linus Walleij <linus.wallei@linaro.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-04-16 11:03:14 +05:30
Adam Ford
2ba019f1c4 ARM: dts: da850-evm: Enable usb_phy, usb0 and usb1
The EVM kit has two USB ports.  This patch will enable both
when booting with device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-04-16 10:32:25 +05:30
Al Viro
4a3877c4ce rpc_pipefs: fix double-dput()
if we ever hit rpc_gssd_dummy_depopulate() dentry passed to
it has refcount equal to 1.  __rpc_rmpipe() drops it and
dput() done after that hits an already freed dentry.

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:49:27 -04:00
Al Viro
659038428c orangefs_kill_sb(): deal with allocation failures
orangefs_fill_sb() might've failed to allocate ORANGEFS_SB(s); don't
oops in that case.

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:49:12 -04:00
Al Viro
c66b23c284 jffs2_kill_sb(): deal with failed allocations
jffs2_fill_super() might fail to allocate jffs2_sb_info;
jffs2_kill_sb() must survive that.

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:49:05 -04:00
Al Viro
a24cd49073 hypfs_kill_super(): deal with failed allocations
hypfs_fill_super() might fail to allocate sbi; hypfs_kill_super()
should not oops on that.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:48:04 -04:00
Al Viro
1088a6408c dput(): turn into explicit while() loop
No need to mess with gotos when the code yielded by straight while()
isn't any worse...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:36:58 -04:00
Al Viro
9c5f1d3019 dcache: move cond_resched() into the end of __dentry_kill()
cond_resched() in shrink_dentry_list() is too early

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:36:58 -04:00
Al Viro
3a8e3611e0 d_walk(): kill 'finish' callback
no users left

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:36:57 -04:00
Al Viro
ff17fa561a d_invalidate(): unhash immediately
Once that is done, we can just hunt mountpoints down one by one;
no new mountpoints can be added from now on, so we don't need
anything tricky in finish() callback, etc.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:36:57 -04:00
Zev Weiss
2276271147 fs: avoid fdput() after failed fdget() in vfs_dedupe_file_range()
It's a fairly inconsequential bug, since fdput() won't actually try to
fput() the file due to fd.flags (and thus FDPUT_FPUT) being zero in
the failure case, but most other vfs code takes steps to avoid this.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:36:26 -04:00
Linus Torvalds
60cc43fc88 Linux 4.17-rc1 v4.17-rc1 2018-04-15 18:24:20 -07:00
Linus Torvalds
e37563bb6c for-4.17-part2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlrTQ4sACgkQxWXV+ddt
 WDti3Q/+MAeqsLTjvre2RQ3ka5hNyCuVftUIBmcP3YfJbt+xZYQyaewW4Xkfi3cm
 cbJE+zehzf5ag+RJhxk3OwFTvNfLGIO9asWs3b08NGUi6VzwL0/8B/iOdZPuHSAV
 TrecQIBE2Tp+xax9cQEnxav34D4dUtXNaDweGjp1MIIUkDneQP/I0vlTu7vafBgX
 UVxP6riL/MCs7sjTHGIPs0lv8L/fgdmo+dk5SnNuIPTOcFTQXgVrtHjw9IvbKWd4
 aq+sbNWoSrhXUfllbFg/wZqDe9tWn9E2f6m/H0ThSoNdxusSVgacOjFRYh20NKLW
 WGB8Amd/ItGtJwJ1CIypa7VX2U11UAi0XT7BeiK82rUNEJ6moRqFOXG861gRLoTZ
 SpH8uWO+e+CogfXob1KCndn5lot4AM2ZTkCqfrjpM35Nul72PZdne0CxNlmiRupY
 Fdt5GB+sg8plcMaRiYr++BbbHP5tggX1MrhLGEbx2XBs2eRdn+2Lv2I1Ig/U4NUb
 Vf+xk/tFLKGOTSZlbv7SV7ekXxG/3+7gAuL7A1XMETZCwBF4L3hwyW7CgkEBb3PC
 TqX8BwMaRpyp/FgW/QL6edjXZ3a64VaHIfqRPNks3lWWcCHVbzyiVPfEjx+AEJ/0
 abx6jXTJhLUBPuPxEgb5rsSv62RoxPoYHqCErrG95XwnZ8rSCts=
 =I0y0
 -----END PGP SIGNATURE-----

Merge tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull more btrfs updates from David Sterba:
 "We have queued a few more fixes (error handling, log replay,
  softlockup) and the rest is SPDX updates that touche almost all files
  so the diffstat is long"

* tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Only check first key for committed tree blocks
  btrfs: add SPDX header to Kconfig
  btrfs: replace GPL boilerplate by SPDX -- sources
  btrfs: replace GPL boilerplate by SPDX -- headers
  Btrfs: fix loss of prealloc extents past i_size after fsync log replay
  Btrfs: clean up resources during umount after trans is aborted
  btrfs: Fix possible softlock on single core machines
  Btrfs: bail out on error during replay_dir_deletes
  Btrfs: fix NULL pointer dereference in log_dir_items
2018-04-15 18:08:35 -07:00
Linus Torvalds
09c9b0eaa0 SMB3 fixes, a few for stable, and some important cleanup work from Ronnie of the smb3 transport code
-----BEGIN PGP SIGNATURE-----
 
 iQGwBAABCAAaBQJa0mDhExxzbWZyZW5jaEBnbWFpbC5jb20ACgkQiiy9cAdyT1HA
 EQv+KxZAFONG/YGBIdoyJevnSobzZSTYgsrEmox28rIvWSFr6Xkt9K6WN4lki+Td
 nacByZBhyeKPp7CxdgjmiNunbGfBZJsWk5LwtgdE2jOLjM9CFq8Z7m2qmkXQ4IkJ
 EoH+NWpCUvEe9nj8oaTdSelR2OHH63SG5E5dK29eOB59ixcVe7qKUG29SpJks9qd
 mCdZyhYyuzh469CKGFeQ8qfWopBH+QFBs4SrpQ9d4liNtZ3W8zTsQ3ezX069AGlU
 Ef2xVTT1DtlZ4/6SiXBKlXGH3jjUg67vEGHzT3ZJwfLVNhTLEpKM/hsPiduSnjS8
 JqdVRdFLc2lQzr4HknhNR9yuE5wT5tZM4iZOjNDwT6Sef2Mt0QIBuYI6kb4mv6Qg
 aCVv7uXUMdvSrTk0mYiO1dXYozGUC+uFhJCuaiLax583o3ihp+/INDosQyqTbavZ
 amRBZpWeNysSJwwJu21RdJiM74+fasR/CDy11U94ssxplg1qE72M8DShK7kXtUIy
 g9ZW
 =Ah5z
 -----END PGP SIGNATURE-----

Merge tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "SMB3 fixes, a few for stable, and some important cleanup work from
  Ronnie of the smb3 transport code"

* tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: change validate_buf to validate_iov
  cifs: remove rfc1002 hardcoded constants from cifs_discard_remaining_data()
  cifs: Change SMB2_open to return an iov for the error parameter
  cifs: add resp_buf_size to the mid_q_entry structure
  smb3.11: replace a 4 with server->vals->header_preamble_size
  cifs: replace a 4 with server->vals->header_preamble_size
  cifs: add pdu_size to the TCP_Server_Info structure
  SMB311: Improve checking of negotiate security contexts
  SMB3: Fix length checking of SMB3.11 negotiate request
  CIFS: add ONCE flag for cifs_dbg type
  cifs: Use ULL suffix for 64-bit constant
  SMB3: Log at least once if tree connect fails during reconnect
  cifs: smb2pdu: Fix potential NULL pointer dereference
2018-04-15 18:06:22 -07:00
Wang Sheng-Hui
c246fd333f filter.txt: update 'tools/net/' to 'tools/bpf/'
The tools are located at tootls/bpf/ instead of tools/net/.
Update the filter.txt doc.

Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-15 20:45:27 -04:00
Linus Torvalds
f0d98d8583 SCSI fixes on 20180415
This is a set of minor (and safe changes) that didn't make the initial
 pull request plus some bug fixes.  The status handling code is
 actually a running regression from the previous merge window which had
 an incomplete fix (now reverted) and most of the remaining bug fixes
 are for problems older than the current merge window.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWtMW7SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYdtAP97FhqR
 x2lDO7J6QT8hMVqwPeQS0Xh5ZPbZLedPmfx9BAD+K1HauGv8J/eMggMDPGrWa/CP
 tGrg2UorMrokLLdIbyA=
 =fOJs
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a set of minor (and safe changes) that didn't make the initial
  pull request plus some bug fixes.

  The status handling code is actually a running regression from the
  previous merge window which had an incomplete fix (now reverted) and
  most of the remaining bug fixes are for problems older than the
  current merge window"

[ Side note: this merge also takes the base kernel git repository to 6+
  million objects for the first time. Technically we hit it a couple of
  merges ago already if you count all the tag objects, but now it
  reaches 6M+ objects reachable from HEAD.

  I was joking around that that's when I should switch to 5.0, because
  3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But
  probably not, even if numerology is about as good a reason as any.

                                                              - Linus ]

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist
  scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler()
  scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl
  scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET
  scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status()
  Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()"
  scsi: aacraid: Insure command thread is not recursively stopped
  scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION
  scsi: qla2xxx: correctly shift host byte
  scsi: qla2xxx: Fix race condition between iocb timeout and initialisation
  scsi: qla2xxx: Avoid double completion of abort command
  scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure
  scsi: scsi_dh: Don't look for NULL devices handlers by name
  scsi: core: remove redundant assignment to shost->use_blk_mq
2018-04-15 17:24:12 -07:00
Linus Torvalds
ca71b3ba4c Kbuild updates for v4.17 (2nd)
- pass HOSTLDFLAGS when compiling single .c host programs
 
 - build genksyms lexer and parser files instead of using shipped
   versions
 
 - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
 
 - let the top .gitignore globally ignore artifacts generated by
   flex, bison, and asn1_compiler
 
 - let the top Makefile globally clean artifacts generated by
   flex, bison, and asn1_compiler
 
 - use safer .SECONDARY marker instead of .PRECIOUS to prevent
   intermediate files from being removed
 
 - support -fmacro-prefix-map option to make __FILE__ a relative path
 
 - fix # escaping to prepare for the future GNU Make release
 
 - clean up deb-pkg by using debian tools instead of handrolled
   source/changes generation
 
 - improve rpm-pkg portability by supporting kernel-install as a
   fallback of new-kernel-pkg
 
 - extend Kconfig listnewconfig target to provide more information
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJa0krLAAoJED2LAQed4NsGyCAP/3Vsb8A4sea7sE3LV6/aFUJp
 WcAm6PXcip1MXy7GI5yxFciwen3Z3ghQUer7fJKDcHR5c4mRSfKaqWp+TLHd6uux
 7I4pV0FNx2PapcPu5T7wNZHN96p3xZC0Z66sq9BCZ/+gNyYmZLIDcBUSIOEk0nzJ
 IsvD46zy6R6KtEnycShKVscg4JyPXJIw1UBqsPDEFHg5l16ARkghND7e5zTW62Fi
 2MqQxNXAksIKpxxoxPH/fIcNp1kFKVxYBH2CW4LQtOjC3GmrozdeV5PUc7yTezPc
 dpqOuEcIAbMH91bkvhhF+ZBi34YrxRoT4S8B3G9iCXRz+2LRZZaitqO4dAH8Kjbn
 0KjkqzNc5TosJXQ8RPTcQlRBi+JmE1bHxICvTx3XNJcqJMqIH0vs3ez/LJKOwhB4
 DbAROoxQNfVcOdouHcx2EuCSdHn24BEyzaGFhi04LACpbRLxr8IJS7hSGXRloBYp
 K3ydRvG/dCZjFRTS+xWWSi3Nzjih2mCctQlH3D4nf4M3vtCX+/k5B9IMEYFfHlvL
 KoNlK4/1vP/dAJZj0iOqd2ksCA1G6iLoHrFp3E5pdtmb4sVe2Ez3gMt+pxz3htR9
 XvjuHOzkWE9eiihs1NsFgQuyP/o3UmNKpDDW0irQ06IFEPXkA/y1mVmeTU3qtrII
 ZDiwGozIkMMEy/MLkcjE
 =tD6R
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - pass HOSTLDFLAGS when compiling single .c host programs

 - build genksyms lexer and parser files instead of using shipped
   versions

 - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency

 - let the top .gitignore globally ignore artifacts generated by flex,
   bison, and asn1_compiler

 - let the top Makefile globally clean artifacts generated by flex,
   bison, and asn1_compiler

 - use safer .SECONDARY marker instead of .PRECIOUS to prevent
   intermediate files from being removed

 - support -fmacro-prefix-map option to make __FILE__ a relative path

 - fix # escaping to prepare for the future GNU Make release

 - clean up deb-pkg by using debian tools instead of handrolled
   source/changes generation

 - improve rpm-pkg portability by supporting kernel-install as a
   fallback of new-kernel-pkg

 - extend Kconfig listnewconfig target to provide more information

* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: extend output of 'listnewconfig'
  kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
  Kbuild: fix # escaping in .cmd files for future Make
  kbuild: deb-pkg: split generating packaging and build
  kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
  kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
  kbuild: rename *-asn1.[ch] to *.asn1.[ch]
  kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
  .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
  kbuild: add %.dtb.S and %.dtb to 'targets' automatically
  kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
  genksyms: generate lexer and parser during build instead of shipping
  kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
  .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
  kbuild: use HOSTLDFLAGS for single .c executables
2018-04-15 17:21:30 -07:00
Linus Torvalds
9fb71c2f23 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
 "A set of fixes and updates for x86:

   - Address a swiotlb regression which was caused by the recent DMA
     rework and made driver fail because dma_direct_supported() returned
     false

   - Fix a signedness bug in the APIC ID validation which caused invalid
     APIC IDs to be detected as valid thereby bloating the CPU possible
     space.

   - Fix inconsisten config dependcy/select magic for the MFD_CS5535
     driver.

   - Fix a corruption of the physical address space bits when encryption
     has reduced the address space and late cpuinfo updates overwrite
     the reduced bit information with the original value.

   - Dominiks syscall rework which consolidates the architecture
     specific syscall functions so all syscalls can be wrapped with the
     same macros. This allows to switch x86/64 to struct pt_regs based
     syscalls. Extend the clearing of user space controlled registers in
     the entry patch to the lower registers"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Fix signedness bug in APIC ID validity checks
  x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
  x86/olpc: Fix inconsistent MFD_CS5535 configuration
  swiotlb: Use dma_direct_supported() for swiotlb_ops
  syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
  syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
  syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
  syscalls/core, syscalls/x86: Clean up syscall stub naming convention
  syscalls/x86: Extend register clearing on syscall entry to lower registers
  syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
  syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
  syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
  syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
  syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
  x86/syscalls: Don't pointlessly reload the system call number
  x86/mm: Fix documentation of module mapping range with 4-level paging
  x86/cpuid: Switch to 'static const' specifier
2018-04-15 16:12:35 -07:00
Linus Torvalds
6b0a02e86c Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti updates from Thomas Gleixner:
 "Another series of PTI related changes:

   - Remove the manual stack switch for user entries from the idtentry
     code. This debloats entry by 5k+ bytes of text.

   - Use the proper types for the asm/bootparam.h defines to prevent
     user space compile errors.

   - Use PAGE_GLOBAL for !PCID systems to gain back performance

   - Prevent setting of huge PUD/PMD entries when the entries are not
     leaf entries otherwise the entries to which the PUD/PMD points to
     and are populated get lost"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pgtable: Don't set huge PUD/PMD on non-leaf entries
  x86/pti: Leave kernel text global for !PCID
  x86/pti: Never implicitly clear _PAGE_GLOBAL for kernel image
  x86/pti: Enable global pages for shared areas
  x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init
  x86/mm: Comment _PAGE_GLOBAL mystery
  x86/mm: Remove extra filtering in pageattr code
  x86/mm: Do not auto-massage page protections
  x86/espfix: Document use of _PAGE_GLOBAL
  x86/mm: Introduce "default" kernel PTE mask
  x86/mm: Undo double _PAGE_PSE clearing
  x86/mm: Factor out pageattr _PAGE_GLOBAL setting
  x86/entry/64: Drop idtentry's manual stack switch for user entries
  x86/uapi: Fix asm/bootparam.h userspace compilation errors
2018-04-15 13:35:29 -07:00
Linus Torvalds
71b8ebbf3d Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
 "A few scheduler fixes:

   - Prevent a bogus warning vs. runqueue clock update flags in
     do_sched_rt_period_timer()

   - Simplify the helper functions which handle requests for skipping
     the runqueue clock updat.

   - Do not unlock the tunables mutex in the error path of the cpu
     frequency scheduler utils. Its not held.

   - Enforce proper alignement for 'struct util_est' in sched_avg to
     prevent a misalignment fault on IA64"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Force proper alignment of 'struct util_est'
  sched/core: Simplify helpers for rq clock update skip requests
  sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
  sched/cpufreq/schedutil: Fix error path mutex unlock
2018-04-15 12:43:30 -07:00
Linus Torvalds
174e719439 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Thomas Gleixner:
 "A rather large set of perf updates:

  Kernel:

   - Fix various initialization issues

   - Prevent creating [ku]probes for not CAP_SYS_ADMIN users

  Tooling:

   - Show only failing syscalls with 'perf trace --failure' (Arnaldo
     Carvalho de Melo)

            e.g: See what 'openat' syscalls are failing:

        # perf trace --failure -e openat
         762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory
         <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? >
         790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory
        ^C#

   - Show information about the event (freq, nr_samples, total
     period/nr_events) in the annotate --tui and --stdio2 'perf
     annotate' output, similar to the first line in the 'perf report
     --tui', but just for the samples for a the annotated symbol
     (Arnaldo Carvalho de Melo)

   - Introduce 'perf version --build-options' to show what features were
     linked, aliased as well as a shorter 'perf -vv' (Jin Yao)

   - Add a "dso_size" sort order (Kim Phillips)

   - Remove redundant ')' in the tracepoint output in 'perf trace'
     (Changbin Du)

   - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo
     Carvalho de Melo)

   - Show group details on the title line in the annotate browser and
     'perf annotate --stdio2' output, so that the per-event columns can
     have headers (Arnaldo Carvalho de Melo)

   - Fixup vertical line separating metrics from instructions and
     cleaning unused lines at the bottom, both in the annotate TUI
     browser (Arnaldo Carvalho de Melo)

   - Remove duplicated 'samples' in lost samples warning in
     'perf report' (Arnaldo Carvalho de Melo)

   - Synchronize i915_drm.h, silencing the perf build process,
     automagically adding support for the new DRM_I915_QUERY ioctl
     (Arnaldo Carvalho de Melo)

   - Make auxtrace_queues__add_buffer() allocate struct buffer, from a
     patchkit already applied (Adrian Hunter)

   - Fix the --stdio2/TUI annotate output to include group details, be
     it for a recorded '{a,b,f}' explicit event group or when forcing
     group display using 'perf report --group' for a set of events not
     recorded as a group (Arnaldo Carvalho de Melo)

   - Fix display artifacts in the ui browser (base class for the
     annotate and main report/top TUI browser) related to the extra
     title lines work (Arnaldo Carvalho de Melo)

   - perf auxtrace refactorings, leftovers from a previously partially
     processed patchset (Adrian Hunter)

   - Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de
     Melo)

   - Synchronize i915_drm.h, silencing a perf build warning and in the
     process automagically adding support for a new ioctl command
     (Arnaldo Carvalho de Melo)

   - Fix a strncpy issue in uprobe tracing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open()
  tracing/uprobe_event: Fix strncpy corner case
  perf/core: Fix perf_uprobe_init()
  perf/core: Fix perf_kprobe_init()
  perf/core: Fix use-after-free in uprobe_perf_close()
  perf tests clang: Fix function name for clang IR test
  perf clang: Add support for recent clang versions
  perf tools: Fix perf builds with clang support
  perf tools: No need to include namespaces.h in util.h
  perf hists browser: Remove leftover from row returned from refresh
  perf hists browser: Show extra_title_lines in the 'D' debug hotkey
  perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering
  tools headers uapi: Synchronize i915_drm.h
  perf report: Remove duplicated 'samples' in lost samples warning
  perf ui browser: Fixup cleaning unused lines at the bottom
  perf annotate browser: Fixup vertical line separating metrics from instructions
  perf annotate: Show group details on the title line
  perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer
  perf/x86/intel: Move regs->flags EXACT bit init
  perf trace: Remove redundant ')'
  ...
2018-04-15 12:36:31 -07:00
Linus Torvalds
19ca90de49 Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 EFI bootup fixlet from Thomas Gleixner:
 "A single fix for an early boot warning caused by invoking
  this_cpu_has() before SMP initialization"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush()
2018-04-15 12:32:06 -07:00
Linus Torvalds
68d54d3ff3 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq affinity fixes from Thomas Gleixner:

  - Fix error path handling in the affinity spreading code

  - Make affinity spreading smarter to avoid issues on systems which
    claim to have hotpluggable CPUs while in fact they can't hotplug
    anything.

    So instead of trying to spread the vectors (and thereby the
    associated device queues) to all possibe CPUs, spread them on all
    present CPUs first. If there are left over vectors after that first
    step they are spread among the possible, but not present CPUs which
    keeps the code backwards compatible for virtual decives and NVME
    which allocate a queue per possible CPU, but makes the spreading
    smarter for devices which have less queues than possible or present
    CPUs.

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Spread irq vectors among present CPUs as far as possible
  genirq/affinity: Allow irq spreading from a given starting point
  genirq/affinity: Move actual irq vector spreading into a helper function
  genirq/affinity: Rename *node_to_possible_cpumask as *node_to_cpumask
  genirq/affinity: Don't return with empty affinity masks on error
2018-04-15 12:29:46 -07:00
Linus Torvalds
9dceab89d8 OpenRISC updates for v4.17
Just one small thing here, it came in a while back but I didnt have
 anything in my 4.16 queue, still its the only thing for 4.17 so sending
 it alone.
 
 Small cleanup:
  - remove unused __ARCH_HAVE_MMU define
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJayP1LAAoJEMOzHC1eZifkoCcQAK5PZ5awA3+DVAPNWN3I9hMF
 0tk3f+R+GrF+wBQ8IwXOok4QaXmJrDwgxHnNRrhBFqHROz1OjEDYNnOk4Two3rs6
 +yTw7TC9GMyowxWcyf+VHzo4/54XIk/Cwg8thEN5W2JSYC/kn1f0HIqfF6AYfCcw
 fLqhDbuM09cslvdhfgsdRQ/ZPDcQjrr9XDP8CUZIeHqCxbPwPWikOUmey4itZKTi
 VQO60SAjNjqSYWcIEcH8EfCvvpEndREvzOH8w7um282USKfiQv3/Qkur3ihTT+0e
 /7JF2LZFLBVPU3dqZVlZDfukamfU+aRsXMh4foEhM6l6uddiKYnu0wjh25trJ6P2
 AlM8BsGL3kjWi7mqR7nxuOgRsLqNcTGPcJaU5X/TGTObDLADATDf7xrxcGxPFMY/
 Z3xkBmKHxv7tqSEo5pfUqvNV7mzT3uep5t4Ql9wq6v0dj+feB6sNx1n/mjSLefOf
 6g9mTarcVR6QajJZYggVNdY1XGOLh88MKpbV/oYIYqMNC34Q/2JTVvKKqsBmyi3r
 Rjk14gZ/fQeKT28XzUgRabDwevCSBzHknDBCQRoQJOjwC/q6Pm7xlOx8XCgEavBn
 OgqXEzq4aWrsAOL2Ffi24+dMvnJe6IOGkU0xDQD1elc1FxJedsMPJUgS9FEnPkGN
 TC3WReB0EdSJ8QI8/oy7
 =edKX
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC fixlet from Stafford Horne:
 "Just one small thing here, it came in a while back but I didnt have
  anything in my 4.16 queue, still its the only thing for 4.17 so
  sending it alone.

  Small cleanup: remove unused __ARCH_HAVE_MMU define"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: remove unused __ARCH_HAVE_MMU define
2018-04-15 12:27:58 -07:00
Eugen Hristev
f0c8d1f6dc iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
When iterating through the channels, the index in the array is not the
scan index. Added an xlate function to translate to the proper index.
The result of the bug is that the channel array is indexed with a wrong index,
thus instead of the proper channel, we access invalid memory, which may
lead to invalid results and/or corruption.
This will be used also for devicetree channel xlate.

Fixes: 5e1a1da0f ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Fixes: 073c66201 ("iio: adc: at91-sama5d2_adc: add support for DMA")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 20:21:33 +01:00
Christophe JAILLET
da2d54494c iio: sca3000: Handle errors returned by 'sca3000_configure_ring()' in 'sca3000_probe()'
'sca3000_configure_ring()' can fail, so test its return value and
propagate it if needed.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 20:18:25 +01:00
Christophe JAILLET
4a5b45383c iio: sca3000: Fix an error handling path in 'sca3000_probe()'
Use 'devm_iio_kfifo_allocate()' instead of 'iio_kfifo_allocate()' in order
to simplify code and avoid a memory leak in an error path in
'sca3000_probe()'. A call to 'sca3000_unconfigure_ring()' was missing.

Sent via the next merge window as unimportant bug and there are
other patches dependent on it.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 20:15:55 +01:00
Linus Torvalds
b1cb4f93b5 powerpc fixes for 4.17 #2
- Fix crashes when loading modules built with a different CONFIG_RELOCATABLE
    value by adding CONFIG_RELOCATABLE to vermagic.
 
  - Fix busy loops in the OPAL NVRAM driver if we get certain error conditions
    from firmware.
 
  - Remove tlbie trace points from KVM code that's called in real mode, because
    it causes crashes.
 
  - Fix checkstops caused by invalid tlbiel on Power9 Radix.
 
  - Ensure the set of CPU features we "know" are always enabled is actually the
    minimal set when we build with support for firmware supplied CPU features.
 
 Thanks to:
   Aneesh Kumar K.V, Anshuman Khandual, Nicholas Piggin.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJa0oWBExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYAV
 EA//UQB7n33HlroMBL3841VswUrIgY36gSi9+QZPjxHiTYGVStI+u0FHq5hm8OMm
 1FkronD0sfbN7t8LJ9FS6vCoAlW15vMBj95pWJXAL7NuQneO7cM5JvRbowVKbNbq
 GESn4EkUj9bAXl7aTzX2yA7jruzMJIwE/2bgl1J6YkpByHx5x/fgzKTuoCRggQqY
 Xd656ZZyWR/uIuWhAjCPFdrPnekVvo7/Gy5Yo5kcR6LbX4MO0JFNOHpiT3wPGGv/
 LJedJtdpH1biMk7SrqLfWD7mpMsVJeMelpkftEbe8zUXf17wBd1rl4JkybLTDwZD
 HznZ0nbnh0j5Q/KRHwOh0sLDSisJF6pQHH/Bnc4Xqrsn4OERwEk40/Ym/O0kDsjH
 n2F3X5a5QLWoBWRsdV3BMyEzc0bgnb++tXeBWOV4jJBEOhoqxwimCU+3fmLiy95A
 urJYf8Sljwve9I5kJyXKpruopgeoJ1aumRwopE8YCG9lfBgzvU/90u6+uKqAdkOv
 kpZxS5FDT2lNIwbCP9WjEelAOGrtA6JQNWU0iPGwsVAvAxX/p1RwwbQeWVlWs3Ek
 UdVF8eGezClpLPa/FQFdDyXfGE6WIf1vK9YnG7k3rUwwkSqoYxKgVQ3o1Vetp0Lg
 fzPsDdDi2V2I3KDYNav8s6kohAIIS/a9XYk4BGvT/htRnUg=
 =0e7c
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix crashes when loading modules built with a different
   CONFIG_RELOCATABLE value by adding CONFIG_RELOCATABLE to vermagic.

 - Fix busy loops in the OPAL NVRAM driver if we get certain error
   conditions from firmware.

 - Remove tlbie trace points from KVM code that's called in real mode,
   because it causes crashes.

 - Fix checkstops caused by invalid tlbiel on Power9 Radix.

 - Ensure the set of CPU features we "know" are always enabled is
   actually the minimal set when we build with support for firmware
   supplied CPU features.

Thanks to: Aneesh Kumar K.V, Anshuman Khandual, Nicholas Piggin.

* tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU features
  powerpc/mm/radix: Fix checkstops caused by invalid tlbiel
  KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode
  powerpc/8xx: Fix build with hugetlbfs enabled
  powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops
  powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops
  powerpc/fscr: Enable interrupts earlier before calling get_user()
  powerpc/64s: Fix section mismatch warnings from setup_rfi_flush()
  powerpc/modules: Fix crashes by adding CONFIG_RELOCATABLE to vermagic
2018-04-15 11:57:12 -07:00
Stefan Popa
4177381b44 iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support
The AD5694/AD5694R/AD5695R/AD5696/AD5696R are a family of 4 channel DACs
with 12-bit, 14-bit and 16-bit precision respectively. The devices have
either no built-in reference, or built-in 2.5V reference.

The AD5671R/AD5675R are similar, except that they have 8 instead of 4
channels.

These devices are similar to AD5672R/AD5676/AD5676R and
AD5684/AD5684R/AD5684/AD5685R/AD5686/AD5686R, except that they use i2c
instead of spi.

Datasheets:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5671R_5675R.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5696R_5695R_5694R.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 19:39:48 +01:00
Stefan Popa
0357e488b8 iio:dac:ad5686: Refactor the driver
In this patch restructures the existing ad5686 driver by adding a module
for SPI and a header file, while the baseline module deals with the
chip-logic.

This is a necessary step, as this driver should support in the future
similar devices which differ only in the type of interface used (I2C
instead of SPI).

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 19:36:32 +01:00
Stefan Popa
98baf78e6d iio:dac:ad5686: Add AD5672R/76/76R/84R/86R support
The AD5684R/AD5686R are a family of 4 channel DACs with 12-bit, 14-bit and
16-bit precision respectively. The devices come either with a built-in
reference or no built-in reference.

The AD5672R/AD5676/AD5676R are similar, except that they have 8 channels
instead of 4.

Datasheets:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5672R_5676R.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5686R_5685R_5684R.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 19:32:20 +01:00
Stefan Popa
fe642e2dfc iio:dac:ad5686: Add support for AD5685R
This driver acctually supports the AD5685R device and NOT the AD5685, which
does not exist.  Maintain old id entry in case we have devicetrees
out there which are using the wrong name.

More information can be found in the datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5686_5684.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 19:19:58 +01:00
Stefan Popa
f4a27306d4 iio:dac:ad5686: Add support for various number of channels
This patch adds a new num_channels attribute as part of the
ad5686_chip_info struct which replaces the AD5686_DAC_CHANNELS define. This
is a necessary step, since this driver should support similar devices which
differ only in the number of channels.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 19:15:54 +01:00
Stefan Popa
16a3c17575 iio:dac:ad5686: Change license description
Add GPLv2+ SPDX identifier and remove license notice to keep the whole
purpose of using an SPDx id.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 19:13:04 +01:00
Stefan Popa
25ffba7a2a iio:dac:ad5686: Style fixes no functional changes
This patch fixes some indentation issues and does not modify the
functionality of the driver.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 19:10:59 +01:00
Douglas Fischer
685cc61b07 iio: imu: Add mpu9255 support to mpu6050 driver
Added support for the mpu9255 IMU to the mpu6050 driver. The
register map is the same as the other chips; the only driver
difference is the compatible string and the WHOAMI register
value.

Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 19:07:38 +01:00
Matt Ranostay
02112260ac iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
usleep_range() uses hrtimers and provides no advantage over msleep()
for larger delays.

Cc: Nicholas Mc Guire <hofrat@osadl.org>
Link: http://lkml.org/lkml/2017/1/11/377
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 18:37:26 +01:00
Peter Rosin
c18af98bc8 iio: potentiometer: mcp4531: switch to using .probe_new
Use the new probe style for i2c drivers.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 18:12:51 +01:00
Peter Rosin
0f6f400e69 iio: potentiometer: mcp4018: switch to using .probe_new
Use the new probe style for i2c drivers.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 18:09:47 +01:00
Jean-Baptiste Maneyrol
4efa1a0050 iio: imu: inv_mpu6050: do not flush fifo when iio buffer is full
There is no need to flush fifo and loose all data when the iio
buffer is full. Just drop the data by ignoring the error as
commonly done in other drivers.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Reviewed-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 18:06:25 +01:00
Hernán Gonzalez
afcd0b22e3 staging: iio: ad7746: Reorder variable declarations
Reorder some variable declarations in an inverse-pyramid scheme.

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 16:09:52 +01:00
Hernán Gonzalez
7adedec254 staging: iio: ad7746: Reorder includes alphabetically
Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 16:08:37 +01:00