Commit graph

766,468 commits

Author SHA1 Message Date
Colin Ian King
dafd6c4963 libata: ensure host is free'd on error exit paths
The host structure is not being kfree'd on two error exit paths
leading to memory leaks. Add in new err_free label and kfree host.

Detected by CoverityScan, CID#1466103 ("Resource leak")

Fixes: 2623c7a5f2 ("libata: add refcounting to ata_host")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-03-27 06:56:02 -07:00
Arnd Bergmann
3262b82d0c Amlogic driver updates for v4.17
- socinfo: add more IDs for newer SoC detection
 - firmware: update init to use module_platform_driver_probe
 - soc: mix. VPU power controller fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlqwThMACgkQWTcYmtP7
 xmVekA//eggAtImxhKuH54lkypYjB9b/M4U+ZVq1JohKehy+3I3oynKHptuX22/V
 qAcC9om2kksPANdGh6V1l4xxCBQ/bBOzOoGneuM1v6TuTpPCOEqy9MVyKKhkqt9c
 ubN7DNd5N18APTtGDCwnbRv2PseWc0F0D0Bn3QerLuH9vlrQ8QISBZz8FUbOHzi7
 ibHrX+MoWlShSFn5/9htELg9YlN0eqjl2GSLDW2AeifDVZ0RqhHAIrLUxucQxuNI
 tQdWEv9KL86k5nLdvKnqf5PZfWzWp0KZPKk+wA4EoFbgWE89S/v+jvih9l/Pnhl4
 gMDUPQTv9JQKT+o85XCyRnB5+MVovO0i/KWE4qwJQsufQILVNnPdAAEpZzZzdfRf
 VpV2nMtoBFPTwhus4vgp9I0rkxXgTY3TuqOrNkVzyYySp7SW3Ic34380RJ/V2lQ8
 C3DLQErz2x8B8BKtWbNZNKXIlb5KimSgM/MU5lnSBFZvJj7fCkGT9I2HM6FLIgh7
 3OglzmNsdZhOkMI5E8Y3Q2r3UcXM2zLPQgMi9fDjL1z8TiXvO06NcRlLFLA7KI+O
 +NkgBCPuVAEuyfZQsD9HlwmbaMF4GMKY3VVAgn4R/8h/uyzmfI3nwBybmeJTvWST
 TRBkJ0Cw4LqxUPhJe51WpX2J5twn3sbuW32yMybxMsMlCbj5hv0=
 =5/NR
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers

Pull "Amlogic driver updates for v4.17" from Kevin Hilman:

- socinfo: add more IDs for newer SoC detection
- firmware: update init to use module_platform_driver_probe
- soc: mix. VPU power controller fixes

* tag 'amlogic-drivers' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  amlogic: meson-gx-socinfo: Update soc ids
  firmware: meson-sm: rework meson_sm_init to use module_platform_driver_probe
  meson-gx-socinfo: make local function meson_gx_socinfo_init static
  meson-mx-socinfo: Make local function meson_mx_socinfo_init() static
  soc: amlogic: meson-gx-pwrc-vpu: fix error on shutdown when domain is powered off
  soc: amlogic: meson-gx-pwrc-vpu: don't print error message on probe deferral
2018-03-27 15:54:23 +02:00
Arnd Bergmann
03836dd07f scpsy:
- mt2712: update power domains to reflect design changes in the SoC
 - fix initialisation of power subdomains
 - add support for mt7623a SoC
 - use defines for mt2701 bus protection mask
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlqvjTgXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00Nx+RAAh+SbaVBj6YPtcB5JtcEMNv8/
 a52WvEDXDNSOKakUphsjxNY/n0WOq/IyntFyNQqBlQBDziWubj49ZH6BZ7UBxHXK
 Xi1IXek7tD8iu0BOyMC1fKF5Y0HUvlRW/bHNXvtFMDzaTA5zN2ZrpAiKvBkXMcW2
 kgb2grv+YXphNo+v9YeYupP8pjyHYCqJ8tY7w44qMp3FigSaMMvtAVQRF36JIsk9
 c606gv3laYdS2EMQDTUMV5sEbYK7V4YwC4a32f/vPe/Rur32NrfG8WkM3abU9KQa
 3HxomsjUkdoW9ddE0JXH5xlh+XlYW02PYYmQH+fBsfj94so8vBVonrKnuIgVf98L
 V159Bt6S8g1IO/Cr80ZGwKyai9Lj7keLSwbkZFJ6qryrFqSVqXSfX2IAZkwjoiTY
 UxGoBEjDC06ExHlxv1dJK0xj6aCfqlCvfgfpsrOTVe/BBg8CTQMdFGHW31CsRPuc
 TrtAuAXzV5EI1GW+Wrv71VW+UXB6RzoZ+4R30KqSp5e7PJ0gRgf9ujBCqfVYsPka
 7rd85JfLzTOICNyA+MSFK6q2FAR7pA3FK4bOhcKVen3bZz0bmsfjXcMjPFTF57jZ
 3qm5NkX2xyW/kSd6WGRKyNRhGR5jx5EYjW7eIEmzwLt1S9SdAMv/TAggt+yfKSmg
 uasH0EPCGoVTX1rApSg=
 =BL8y
 -----END PGP SIGNATURE-----

Merge tag 'v4.16-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers

Pull "ARM: mediatek: updates for soc drivers for v4.16-next" from Matthias Brugger:

scpsy:
- mt2712: update power domains to reflect design changes in the SoC
- fix initialisation of power subdomains
- add support for mt7623a SoC
- use defines for mt2701 bus protection mask

* tag 'v4.16-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: update power domain data of MT2712
  dt-bindings: soc: update MT2712 power dt-bindings
  soc: mediatek: fix the mistaken pointer accessed when subdomains are added
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
  soc: mediatek: avoid hardcoded value with bus_prot_mask
  dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
  dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
2018-03-27 15:53:04 +02:00
Arnd Bergmann
498b565154 soc/tegra: Changes for v4.17-rc1
This contains more Tegra194 support as well as an implementation for the
 MBIST workaround needed to avoid some memory-related issues on Tegra210.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlqveZMTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoTM+EACS/YsxSNWQJ8LQkh71Cjf9mdMg5TAb
 Nutd+4d10qWuMxJGm9hmpBS5i48QNRAFmZ6K5F9FZ/mSFpVN9Gni+9YkdkhKRi70
 HWaCQjYM5W+oGmQKZnB+GroG0670jK1esMCd+boDgI2XAQCGS20auQb1n1ZB4f8L
 h4uIwoH+iN4PtxjdF/E0Mhzc7VzDPYRoJJZx5tm8MH8KLKP6aoCQ8ZTsZRg+eD6Q
 IbSjUJrPDq6179cQJmIYwvt4xyppLGCjtmvAD8cCoAFgEM69QMb7HzU5ju32unFl
 zdIxJHJ7b0/1Ttv1JIS+YZiwkDlHUhl0Xf2h5H+8T/XoZZWg0soKxlg5BaoNsphJ
 3jcxRbLX136QiWc8D0HrCFoibfEsD+Ef9K/+u0qTFy0XugNR9dzDrrPL9oOaUCSq
 2duJvyD7Lxqz/iAdJ34T1rWkzmzZa4qAujgWmltgqEg+fhs8GSyTw4yDM0aEesed
 42lGmWfraz7fZ+e1YqBZzxv+lDpULdTR10IIt+aKwTV7tMg/ivZtwfn6kwxVjkIY
 gd1RPrud0T24qLm+h/xxfG69XmFOW2cS1my87vuJeCvhOZmRzDAopfVZHkWMrKlU
 l4tgqFStorWXvzJkzBv3UHrGvwFdTcAP2nMVtAcNtTzIw0S6VNRK3c+1vhaS4vbN
 jWDsDc8rW9E4DQ==
 =MGgs
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.17-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "soc/tegra: Changes for v4.17-rc1" from Thierry Reding:

This contains more Tegra194 support as well as an implementation for the
MBIST workaround needed to avoid some memory-related issues on Tegra210.

* tag 'tegra-for-4.17-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Use the new reset APIs to manage reset controllers
  soc/tegra: pmc: Pass PMC to tegra_powergate_power_up()
  soc/tegra: pmc: MBIST work around for Tegra210
  soc/tegra: pmc: Add Tegra194 compatibility string
  soc/tegra: Add Tegra194 SoC configuration option
2018-03-27 15:51:58 +02:00
Baolin Wang
348f3cde84 gpio: Add Spreadtrum PMIC EIC driver support
The Spreadtrum PMIC EIC controller contains only one bank of debounce EIC,
and this bank contains 16 EICs. Each EIC can only be used as input mode,
as well as supporting the debounce and the capability to trigger interrupts
when detecting input signals.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:51:22 +02:00
Baolin Wang
25518e024e gpio: Add Spreadtrum EIC driver support
The Spreadtrum digital-chip EIC controller has 4 sub-modules: debounce EIC,
latch EIC, async EIC and sync EIC, and each sub-module can has multiple
banks and each bank contains 8 EICs.

Each EIC can only be used as input mode, and has the capability to trigger
interrupts when detecting input signals.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:51:17 +02:00
Baolin Wang
be520cbc85 dt-bindings: gpio: Add Spreadtrum EIC controller documentation
This patch adds the device tree bindings for the Spreadtrum EIC
controller. The EIC can be seen as a special type of GPIO, which
can only be used as input mode.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:51:11 +02:00
Arnd Bergmann
d0994465d0 firmware: Changes for v4.17-rc1
These changes are rather small, with just a fix for a return value check
 and some preparatory work for Tegra194 BPMP support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlqrz+cTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoeYLEACtgcGVUSA/gsqdskhIHVE9zVmFgQes
 sivqoXAsMKvuHnBpJ3QG0BLXF0FWFmXwpRtCmblWwsp+OredeXv+Kv7Zki4/hvBD
 IsuXaerTxTcI8PgD94TwiPNqSX8HrqAvQs5402QxShSkQO0eGXUcFo3I1nzKAerm
 kHX2GNBqg2qDaAGA7jUcmAs/XNV4hxdm3tPWntqgB89jyuM2Qhyg0/v/XVnYjZJr
 gc8oClIpXZMdM1dRLbHWMVYUBLeSIHdAGVp9mfx53cCALoW9aGmwceO0I7ZWU2F0
 07YHSnoRZO6Ma2+yzoDFNeaOzA3yuX2dfGYQ+kHHUXdWvO61uArs5eBrOinPNPSb
 +ohQtkxcU29NZ5YkIaS1C36sKrPDJMYFm/6aKB8bp+I+cy16g/P6I3XE5yFu/r55
 7uWmfEiu9oNvllHEEPSlsslwaFZds9l8ticQ5D+DUm6duPsInrk4hNrqXRlM9daK
 kHw5dq/+gAZJOUhhjMqhTthyqpqKHJlR6hUX9clEB8H2LMkGbcQZQGJ669nNJBL1
 FxROPfSm1cPsU6YdXePY0OGHoGN0U2jVgDgqwNdZW1I8QZSH1YDAG1I7YvCEyGdf
 4egRaOPcE7JGhaOExVxDEI8Z1Nk1HAoSLEwVKeIeJEcrzknzCmAtnJ4L9tSlwYFp
 Ea8cQ9BWAcqX0w==
 =oigm
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.17-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "firmware: Changes for v4.17-rc1" from Thierry Reding:

These changes are rather small, with just a fix for a return value check
and some preparatory work for Tegra194 BPMP support.

* tag 'tegra-for-4.17-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: adjust tested variable
  firmware: tegra: Simplify channel management
2018-03-27 15:50:57 +02:00
Arnd Bergmann
064fe81ef2 Two omap5 specific aux control module patches for v4.17
On omap5 there is an aux control module that we are not handling
 currently for clocks, so let's add support for it.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlqz2lIRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXO79xAArmNZj7HmQUCwBlXNV3gRqYo7tznId8aV
 hd2iMnBS0wcHfshfELaUxjZKh3Jc5RoEiEJceOiPOXOQhpetOW42dc7Ok7V3uG+w
 ljsdLtDUWkd5XTJ4BIeynec1p5Y/HKfhuKwruAvem/ZWu+RpfQfehIv7mHgt7+3c
 hxzaPH2uoujurnaQWxF6ROfqlf6sxiR9ZP85ta0toA/gmf4pxIfsWa8nVNRQB6kc
 TWjuDc64Ztn4quucb9pPbpRFTR67FN+D3ohbsM1y11lxhtUyrj15QmRz+yWHUGP+
 UKyCRFb0yphjVVbiJehhXN3/V+F0GQTGgoWJaLBxFp2JeU3jxnp3nIojvrW9b+4B
 G1jDOFxA6Gl8xq9aFpVcdKt+FtRYnTORL48xXQXynCapdVnzUPXFaySJLaLoEfXn
 B1henmgROT4ekjA3Efmfg8fCCTPhxO7gW6dmmjEtJwVxTwuw1xkH2zSOHR0MfbR9
 6hiGdT8CG8EoPGrxuWqsT/eLL2RSMRUWy9LBofVd5U3ZS9OhlWWzk4Sal29TRvM1
 oSj2te59lEySaZAJ0VTWhjhkAAP22MIovk32mSOb7CHOwDUMuCij4wgllujVOLQJ
 qG73rFF5HpKXnhWoZqVjsdlUB2vO+K1DdMt0KIMnTqjiAIkN3SH5Bv9/0U3SBoTs
 Lld09xB1MOQ=
 =WMHn
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.17/soc-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Two omap5 specific aux control module patches for v4.17" from Tony Lindgren:

On omap5 there is an aux control module that we are not handling
currently for clocks, so let's add support for it.

* tag 'omap-for-v4.17/soc-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP5: control: add support for control module wkup pad config
  ARM: omap2+: control: add support for auxiliary control module instances
2018-03-27 15:48:52 +02:00
Arnd Bergmann
9302849426 Samsung mach/soc changes for v4.17, part two
1. Fix coupled CPU idle freeze on Exynos4210.
 2. Simplify hot-path in coupled CPU idle.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJat5EqEBxrcnprQGtlcm5lbC5vcmcACgkQwTdm5oaLg9eQiA//
 ZHUtLhZ4rzqbYd364RShI5rcDEGJjXvQt7L4S7n9YFHXoEzYvPpMNHNPFsRhHZoI
 +gup+qYYt7WGy90MrTGEQdGV2H9ouiXx2erA2Gm08Eq6BMQxPaElCN6SKf9+GGBL
 Cs+f32ZieeY4SrQ3DiLwQTuOM2lJJBo5Dj6ZfbT8kxcznNGlGLA9iy+c/OvrU5Th
 LOk58bgJXrjbSaStmfBn+3OPm9cgg0XVEU6BHOxdeTAwxPha6l1p+r7Grs2ZHfC3
 VfIbZjZpBPcFPT5GIRbNN5CLxtc0sltuj31qqZSv/4WTVWCO3j3nqDnRHF70NRDS
 7QZ4AryCi4ptBVWAPk9FybY5ianULHabOBHVVIe8RbX/OL8Y9x5fAPjrZEktoJB3
 SqNQ1qy9vnK9QMhn9ogd21gIbvXPenwzcGOJ3WytVXlwmwlT8HhqoqDU1IthC6AB
 D5aUAtNSOnfA3YaJkn3QmvMbX8CTTdxRvW/AzoARnfQ/RO0J/DO0eIFkmeA2+Ubz
 UnXIgrbRY05bpQrl6OVzsn8D5Su4KxHziLzkGsclOoFjtzDJDwngJU/DclU6VT16
 ryYHGPNkF6/NEb5UQcKUEjNtNcbSD9L2xT0InhqeHaI2ujvknXmN0IPWd2Y668X4
 gaawOgK6jhw+ijeIBPDpflJK66OFzP0D2BVIWN3k1H4=
 =D4DR
 -----END PGP SIGNATURE-----

Merge tag 'samsung-soc-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung mach/soc changes for v4.17, part two" from Krzysztof Kozłowski:

1. Fix coupled CPU idle freeze on Exynos4210.
2. Simplify hot-path in coupled CPU idle.

* tag 'samsung-soc-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ARM: EXYNOS: Fix coupled CPU idle freeze on Exynos4210
2018-03-27 15:47:58 +02:00
Arnd Bergmann
59162c9366 Renesas ARM Based SoC Updates for v4.17
01d675f159 ARM: shmobile: rcar-gen2: Add watchdog support
 58adf1ba0d ARM: shmobile: Add watchdog support
 
 * SoC
   - Identify R-Car V3H (r8a77980) and M3N (r8a77965)
 
   - Enable R-Car Gen2 regulator quirk for Stout board with H3 (r8a7790) SoC
 
     Marek Vaust says "Regulator setup is suboptimal on H2 Stout too. The
     Stout newly has two DA9210 regulators, so the quirk is extended to
     handle another DA9210 at i2c address 0x70."
 
   - Add watchdog support
 
     This is the SoC portion of the following solution. It is not yet
     enabled in DT as it is not functional without clock dependencies
     in place.
 
     Fabrizio Castro says "this series has been around for some time as RFC,
     and it has collected useful comments from the community along the way.
     The solution proposed by this patch set works for most R-Car Gen2 and
     RZ/G1 devices, but not all of them. We now know that for some R-Car
     Gen2 early revisions there is no proper software fix. Anyway, no
     product has been built around early revisions, but development boards
     mounting early revisions (basically prototypes) are still out there.
     As a result, this series isn't enabling the internal watchdog on R-Car
     Gen2 boards, developers may enable it in board specific device trees if
     needed.  This series has been tested by me on the iwg20d, iwg22d,
     Lager, Alt, and Koelsch boards.
 
    The problem
    ===========
    To deal with SMP on R-Car Gen2 and RZ/G1, we install a reset vector to
    ICRAM1 and we program the [S]BAR registers so that when we turn ON the
    non-boot CPUs they are redirected to the reset vector installed by Linux
    in ICRAM1, and eventually they continue the execution to RAM, where the
    SMP bring-up code will take care of the rest.  The content of the [S]BAR
    registers survives a watchdog triggered reset, and as such after the
    watchdog fires the boot core will try and execute the SMP bring-up code
    instead of jumping to the bootrom code.
 
    The fix
    =======
    The main strategy for the solution is to let the reset vector decide if
    it needs to jump to shmobile_boot_fn or to the bootrom code.  In a
    watchdog triggered reset scenario, since the [S]BAR registers keep their
    values, the boot CPU will jump into the newly designed reset vector, the
    assembly routine will eventually test WOVF (a bit in register RWTCSRA
    that indicates if the watchdog counter has overflown, the value of this
    bit gets retained in this scenario), and jump to the bootrom code which
    will in turn load up the bootloader, etc.  When bringing up SMP or using
    CPU hotplug, the reset vector will jump to shmobile_boot_fn instead."
 
 * R-Car Rst
   - Add support for R-Car V3H (r8a77980) and V3H (r8a77980)
 
 * R-Car SYSC
   - Mark rcar_sysc_matches[] __initconst
 
    Geert Uytterhoeven says "This frees another 1764 bytes
    (arm32/shmobile_defconfig) or 1000 bytes (arm64/renesas_defconfig) of
    memory after kernel init."
 
   - Fix power area parents
 
     Sergei Shtylyov says "According to the figure 9.2(b) of the R-Car
     Series, 3rd Generation User’s Manual: Hardware Rev. 0.80 the A2IRn and
     A2SCn power areas in R8A77970 have the A3IR area as a parent, thus the
     SYSC driver has those parents wrong.."
 
   - Add support for R-Car V3H (r8a77980) and V3H (r8a77980)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlqr2U0ACgkQ189kaWo3
 T76GQQ//TglmA64QnoynoYa7VR5VBvMoT4Hfd2LhUQaJ5dlqtnaIeipPIc/k5rlH
 qsw5Jp7OlkNWAwchlIqkto+vfNhuxHItqvZoBnmrI2otEUvbaJ+9A2xAuhmYBxxH
 awKoSTY4A+n8GFcCIOvYMzvRKVFUSIDSWYvYQSJtu6OyXZYI244qwcytgDyuHdRE
 mS1nqdQkAcuxEdTLSwjct0puZTWMR41+NOM0B7qvVLDi2bnONUSS0ktLoEBiYO5D
 Q7fpDOg6OZjIjVPYYb7hPSVw+jo+imyqgYdQ9CJu/r9j6Q7pn22NZ8MKWcTFsfYY
 ZUhcJp1vHhTGMRupkgTi+oWSA7TFw1oxb1ZFCP1C5hL+mfryybVe5pBEwetOHg8A
 DGb6OejvC1/amVArTco7JJ1Ul6Q2IU5UcvuOtmfT7UPNw05O/dIYjjV/BVfBHcGC
 cDgVLq8Y6PGHjU2Jx1botuPdMSVsgZrQzbc8h7p02z9Klr9Drzh9+5oox5oxUlqb
 A+60+OBHizY4g2/TCKvtPMWtEBt1Wjhayx/fF1EwD7/K16Wb2UFKizKbeZPTXHpH
 KlltgVucDvqr/otJFBgS+Kg/7+ITq6hHrB3KCk4bjk+6qSXiZ93p58c4l7+A+JTB
 S9q02YQC+cvy0StMrCpuc2R9n9EK0tmXFvv5hF8Ls938caGl6rI=
 =S1q0
 -----END PGP SIGNATURE-----

Merge tag 'renesas-soc-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC Updates for v4.17" from Simon Horman:

01d675f159 ARM: shmobile: rcar-gen2: Add watchdog support
58adf1ba0d ARM: shmobile: Add watchdog support

* SoC
  - Identify R-Car V3H (r8a77980) and M3N (r8a77965)

  - Enable R-Car Gen2 regulator quirk for Stout board with H3 (r8a7790) SoC

    Marek Vaust says "Regulator setup is suboptimal on H2 Stout too. The
    Stout newly has two DA9210 regulators, so the quirk is extended to
    handle another DA9210 at i2c address 0x70."

  - Add watchdog support

    This is the SoC portion of the following solution. It is not yet
    enabled in DT as it is not functional without clock dependencies
    in place.

    Fabrizio Castro says "this series has been around for some time as RFC,
    and it has collected useful comments from the community along the way.
    The solution proposed by this patch set works for most R-Car Gen2 and
    RZ/G1 devices, but not all of them. We now know that for some R-Car
    Gen2 early revisions there is no proper software fix. Anyway, no
    product has been built around early revisions, but development boards
    mounting early revisions (basically prototypes) are still out there.
    As a result, this series isn't enabling the internal watchdog on R-Car
    Gen2 boards, developers may enable it in board specific device trees if
    needed.  This series has been tested by me on the iwg20d, iwg22d,
    Lager, Alt, and Koelsch boards.

   The problem
   ===========
   To deal with SMP on R-Car Gen2 and RZ/G1, we install a reset vector to
   ICRAM1 and we program the [S]BAR registers so that when we turn ON the
   non-boot CPUs they are redirected to the reset vector installed by Linux
   in ICRAM1, and eventually they continue the execution to RAM, where the
   SMP bring-up code will take care of the rest.  The content of the [S]BAR
   registers survives a watchdog triggered reset, and as such after the
   watchdog fires the boot core will try and execute the SMP bring-up code
   instead of jumping to the bootrom code.

   The fix
   =======
   The main strategy for the solution is to let the reset vector decide if
   it needs to jump to shmobile_boot_fn or to the bootrom code.  In a
   watchdog triggered reset scenario, since the [S]BAR registers keep their
   values, the boot CPU will jump into the newly designed reset vector, the
   assembly routine will eventually test WOVF (a bit in register RWTCSRA
   that indicates if the watchdog counter has overflown, the value of this
   bit gets retained in this scenario), and jump to the bootrom code which
   will in turn load up the bootloader, etc.  When bringing up SMP or using
   CPU hotplug, the reset vector will jump to shmobile_boot_fn instead."

* R-Car Rst
  - Add support for R-Car V3H (r8a77980) and V3H (r8a77980)

* R-Car SYSC
  - Mark rcar_sysc_matches[] __initconst

   Geert Uytterhoeven says "This frees another 1764 bytes
   (arm32/shmobile_defconfig) or 1000 bytes (arm64/renesas_defconfig) of
   memory after kernel init."

  - Fix power area parents

    Sergei Shtylyov says "According to the figure 9.2(b) of the R-Car
    Series, 3rd Generation User’s Manual: Hardware Rev. 0.80 the A2IRn and
    A2SCn power areas in R8A77970 have the A3IR area as a parent, thus the
    SYSC driver has those parents wrong.."

  - Add support for R-Car V3H (r8a77980) and V3H (r8a77980)

* tag 'renesas-soc-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: rcar-gen2: Add watchdog support
  ARM: shmobile: Add watchdog support
  ARM: shmobile: rcar-gen2: Fix error check in regulator quirk
  soc: renesas: rcar-rst: Add support for R-Car M3-N
  ARM: shmobile: stout: enable R-Car Gen2 regulator quirk
  soc: renesas: rcar-sysc: Add R-Car M3-N support
  soc: renesas: Identify R-Car M3-N
  soc: renesas: rcar-sysc: add R8A77980 support
  dt-bindings: power: add R8A77980 SYSC power domain definitions
  soc: renesas: r8a77970-sysc: fix power area parents
  soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2
  soc: renesas: rcar-rst: add R8A77980 support
  soc: renesas: identify R-Car V3H
  soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
2018-03-27 15:45:03 +02:00
Gregory CLEMENT
eb59e09203 arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
Follow the recent trend for the license description

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:43:12 +02:00
Gregory CLEMENT
b3820aa10c arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:43:10 +02:00
Wei Yongjun
f79b55d9b9 gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe()
platform_get_resource() may return NULL, add proper
check to avoid potential NULL dereferencing.

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = platform_get_resource(pdev, t, n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
[albeu@free.fr: Fixed patch to apply on current tree]
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:42:29 +02:00
Gregory CLEMENT
e7822263a7 arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
Follow the recent trend for the license description

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:42:21 +02:00
Arnd Bergmann
8650b9feb0 Allwinner core changes for 4.17
Here is our bunch of changes for mach-sunxi for this release cycle. This is
 basically only about bringing the SMP support to the A80, which has a bug
 in hardware and cannot use PSCI like the other SoCs we have.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAlqzx8kACgkQ0rTAlCFN
 r3S+0xAAiLjIUPT/N56xBh9F8j3KP9HU6tVw47F92MAU0x/mcfiQl5UgDkLU1NkI
 NxbL4SqirjFAdW2xv7/Lj8XEAqftFOOtBb1383WC3Hvzm/BSGtnC6nKqMdzW2k1Q
 AJhKox3OUhASCpu6hup7/cFhgg3S+h1dC689TNv2BJTSk9RIV2wUctnTt4HDh6Yj
 VNanttnPHOCwUUfQl8CtU+PU/crKK9usPCCE9pm3522wqbTz3QzhDvOT0bBeLlXx
 DkcU3+UITyg/OXBXoj1GUe3Y2I/aFz8DRfGL5HKIQFLmkFjmzzOnbgcDkoYgIwoN
 WVxNMPaNGUiytGDe8Cr650rX15txWpori4XjhGlrAc/73csY8InuNgFh0OMbGsau
 Req4Hj30ZuK7/pNOEqIrWOgmqugDX1/cOeBBqYBQugBylUBjLjnIshVlKSrE9hry
 vjFLS9jOKKdPRZI/y2vVq/GAPkUnTaBNbS6z9JASMDXb8Sj7yySAEww7YZ8u2uay
 oQuOW6bCHuEmpxvVAhbnt1VI9mte7TygrJjIdhM20oW/A1nChckbrVcV14OuJUtw
 AduuoCtzigYCcGNZN+2FU/AMPPsfiJXXfw8Va0rcK4SC5VNnD5bQ0CCG4zObHKHT
 MGWILWGp3WkD+BIosLXlPBxzNxHuuz0s7qzlGBhpsfLzS7zwd6U=
 =kUb5
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-core-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc

Pull "Allwinner core changes for 4.17" from Maxime Ripard:

Here is our bunch of changes for mach-sunxi for this release cycle. This is
basically only about bringing the SMP support to the A80, which has a bug
in hardware and cannot use PSCI like the other SoCs we have.

* tag 'sunxi-core-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: sunxi: mc-smp: Split out SoC-specific device node lookup sequence
  ARM: sunxi: mc-smp: Use DT enable-method for sun9i A80 SMP
  ARM: sunxi: mc-smp: Fix "lookback" typo
  ARM: sun9i: smp: Support cpu0 hotplug
  dt-bindings: ARM: sunxi: Document A80 SoC secure SRAM usage by SMP hotplug
  ARM: sun9i: smp: Support CPU/cluster power down and hotplugging for cpu1~7
  ARM: sun9i: Support SMP bring-up on A80
2018-03-27 15:42:18 +02:00
Stefan Agner
63fdfbf5a7 ARM: multi_v7_defconfig: add NXP FlexCAN IP support
Enable FlexCAN support as module by default. FlexCAN can be found
on various NXP designs such as the i.MX and Vybrid SoC family.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:38:31 +02:00
Stefan Agner
76b5bce4bb ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
Enable the i.MX thermal driver required for i.MX SoC family.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:38:11 +02:00
Stefan Agner
efec24d8b1 ARM: multi_v7_defconfig: add RN5T618 PMIC family support
This allows to successfully boot Colibri iMX7 which is using
the Ricoh RN5T567 PMIC.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:36:24 +02:00
Stefan Agner
18c9f12255 ARM: multi_v7_defconfig: add NXP graphics drivers
Enable drivers to support NXP graphics IPs such as:
- Etnaviv (e.g. i.MX6)
- DCU (e.g. Vybrid LS1021A)
- mxsfb (e.g. i.MX6UL/ULL/7)

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:36:11 +02:00
Stefan Agner
1f9b3e6650 ARM: multi_v7_defconfig: add GPMI NAND controller support
Add GPMI NAND controller support as required by some NXP i.MX6/7
based boards.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:35:58 +02:00
Stefan Agner
0027736351 ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs.
Since OTP values might be required by drivers required during
boot, make sure the driver is built-in (e.g. i.MX thermal
driver).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:35:43 +02:00
Linus Walleij
89b0b4e2d3 Merge branch 'gpio-reserved-ranges' into devel 2018-03-27 15:34:40 +02:00
Stephen Boyd
691bf5d5a7 pinctrl: qcom: Don't allow protected pins to be requested
Some qcom platforms make some GPIOs or pins unavailable for use
by non-secure operating systems, and thus reading or writing the
registers for those pins will cause access control issues and
reset the device. With a DT/ACPI property to describe the set of
pins that are available for use, parse the available pins and set
the irq valid bits for gpiolib to know what to consider 'valid'.
This should avoid any issues with gpiolib. Furthermore, implement
the pinmux_ops::request function so that pinmux can also make
sure to not use pins that are unavailable.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:34:25 +02:00
Stefan Agner
e6a49623a2 ARM: multi_v7_defconfig: configure I2C driver built-in
PMIC often require the I2C bus, and the PMIC regulators might be
necessary to power on eMMC/SD-card or other supplies required
for successful boot. Make sure I2C driver for i.MX devices is
built-in.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:34:22 +02:00
Stephen Boyd
726cb3ba49 gpiolib: Support 'gpio-reserved-ranges' property
Some qcom platforms make some GPIOs or pins unavailable for use by
non-secure operating systems, and thus reading or writing the registers
for those pins will cause access control issues. Add support for a DT
property to describe the set of GPIOs that are available for use so that
higher level OSes are able to know what pins to avoid reading/writing.
Non-DT platforms can add support by directly updating the
chip->valid_mask.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:34:20 +02:00
Stephen Boyd
ace56935ff gpiolib: Change bitmap allocation to kmalloc_array
We don't need to clear out these bits when we set them immediately
after. Use kmalloc_array() to skip clearing the bits.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:34:13 +02:00
Stephen Boyd
e4371f6e07 gpiolib: Extract mask allocation into subroutine
We're going to use similar code to allocate and set all the bits in a
mask for valid gpios to use. Extract the code from the irqchip version
so it can be reused.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:34:07 +02:00
Stephen Boyd
b9c725ed73 dt-bindings: gpio: Add a gpio-reserved-ranges property
Some qcom platforms make some GPIOs or pins unavailable for use
by non-secure operating systems, and thus reading or writing the
registers for those pins will cause access control issues.
Introduce a DT property to describe the set of GPIOs that are
available for use so that higher level OSes are able to know what
pins to avoid reading/writing.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:33:40 +02:00
Kunihiko Hayashi
d28db34a56 arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
Enable the thermal monitor driver and the AVE ethernet driver
implemented on UniPhier SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:31:19 +02:00
Chris Wilson
ae2f5c0093 drm/i915/execlists: Avoid kicking the submission too early for rescheduling
If the request is still waiting on external fences, it has not yet been
submitted to the HW queue and so we can forgo kicking the submission
tasklet when re-evaluating its priority.

This should have no impact other than reducing the number of tasklet
wakeups under signal heavy workloads (e.g. switching between engines).

v2: Use prebaked container_of()

References: f6322eddaf ("drm/i915/preemption: Allow preemption between submission ports")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326115044.2505-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
2018-03-27 14:31:06 +01:00
Arnd Bergmann
99600b165f ARM64: stratix10: defconfig updates for 4.17
-enables STMMAC_ETH controller that is present on Stratix10
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJatR8yAAoJEBmUBAuBoyj0VKwQAKqhi0tzhJe2dnlu7ic5kNLv
 lfZ90As+XbPxhyyyCCNldd0d7fZltRrHRC5iYV43+ZIe3T/FCQ3bM6uCKMdiUP8i
 OtfchVf3SOO3x2AaVrRpetNiS6poV/1hugH3/4B/n9MFKMb8ZeLszRp3oUFcX9UZ
 ZdhzyNPPAuTV/j4IaXR3d7++cbVM+ep0vUMuR8T7sW3wjCqnhV1GieYN00w05Y6A
 cbS20o6yju3IXBSlzo6nyMlUuAcGYPCmth6F7gVLjWXfaiRYGcLMrqspaErcCJCC
 L32W0Fz9YqF6jI2zkghO1vhYiqR8qQPS38TU4OpkMMOP4utUYYOa7tvNTB+Yx2D5
 h6st3wbidr40RtnP/3ZVpd5bSvBQOkGg0643Hx8x14Z0TUzeUjdUqmmWlq3Y7Zet
 /aiwoPz7PtCRMvL5gwdR3JwPGNGaIPRmodhN7RjWre5CMOy7H8ICEKEReN4T++/9
 zDDPpgV3r5RbrcVY4B0yXBbPX02JgOEy/6H+hLBoF9JWJrvzq3tCeyzchGfWaEdo
 eyL3uzjIU4spd4YTsO38IK7KQPe8FVf+ymxZTxTRXAwRFyO/o4u+sGQ/g4sasSQQ
 zOKw832Bu2tqmGMQY3Tjej0Dv+Qze5Ub4ydhHwBNbTzMS/F+RPa3vlXMNYY+TDHh
 vV/21qw9lXEq9+KYro6i
 =53dx
 -----END PGP SIGNATURE-----

Merge tag 'stratix10_defconfig_for_v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/soc

Pull "ARM64: stratix10: defconfig updates for 4.17" from Dinh Nguyen:

-enables STMMAC_ETH controller that is present on Stratix10

* tag 'stratix10_defconfig_for_v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: defconfig: enable stmmac ethernet to defconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:29:06 +02:00
Arnd Bergmann
34dacef1c3 Second set of defconfig changes for omap variants for v4.17
This series enables more devices working on droid4 to make it easier
 for people and distros to use out of the box.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlqz3MERHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNBZhAA5E4KkoNvZSlKv2oLoUQ0CuOA/F9WIKJ3
 bRcCNuLZSRSrrI7V739B69cR7e2HbSz4u4REYMdNwWI79IJBdlStqoy4UX2PMV0N
 jshHWR7GqOBWn3JLhCWXKmeo3ezq9LQiiIR7YfawD1evy+2CzgvjuEmJOk+FTGEF
 +K6A+fI/J5aTt/UcSXBgmhgjWjEoJp0NeDK1aSKB1GLid7owj5xjHqqbbkL2yin4
 Sn3Vs5diQbgAoypTxOlpObMSjv293gmlS/EmB2CPKdav0M178UxMd6O9zfbQV4Bc
 2iqxcIGUt558V9xAyGhv46Z6u4BlfzxaUVf4QksBM++Up9vwFYMkArUm0PUW30Wg
 x0VZkdqZ5Tc1IFjZ9cgrfOGLeyWvqqd5LX5enpUJVlUbjJv+pWzU9/mhGZxnCaxv
 Q8IUGgYRKwSsz2s95thACPmVa3vY9hOxcJe2KrlMzB8tDekerMFVL70W0WO2gnuH
 xYptRrwpioRbAny74vIssWnl4UaaJAKkrVRMeSbLyZ+J88JReHMuWyHPEfIVrIGw
 D4jWWWGHKd4gQ/h/dCmj2TU0Q2IHb8sUyx08GCngpsQT+jRHGW2ldDcsle9PYvwy
 aiXcQwWy+9J7hJvk1q/gWMJtS04EanvfIP7OsPMNzrxOhSD25zKZFh4voYQVU2TQ
 q6hx/TW16MI=
 =sOYq
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.17/defconfig-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Second set of defconfig changes for omap variants for v4.17" from Tony Lindgren:

This series enables more devices working on droid4 to make it easier
for people and distros to use out of the box.

* tag 'omap-for-v4.17/defconfig-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules
  ARM: omap2plus_defconfig: Add UINPUT
  ARM: omap2plus_defconfig: Enable MDM6600 USB PHY
  ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARD
  ARM: omap2plus_defconfig: Enable PWM_VIBRA
2018-03-27 15:27:23 +02:00
Arnd Bergmann
b899e52261 Qualcomm ARM64 Based defconfig Updates for v4.17
* Enable cpufreq governors, QCOM TSENS, and QCOM APCS driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJasG8nAAoJEFKiBbHx2RXVLN4P/0iQyD8opqOynFRBPwgbLrVp
 VFF/TwALktbr0/0RneQG82ZWWFRgcx0ymAyJWpxZmTubLjwFAYvyEUL37cIN2DSM
 Oy8j7gvP7NB8F9lrjEaFgLMh8umsooPB9qpi2i/EgO9kzQayEo+ZmRu0bOAVzcA8
 Jua/GHFWdHOHPnPPdKkLLxhz7+KG07I6xVcnEitHOobg9cMEM9n6h0f1/jpm9seK
 /9d0MtU6LkcSyosbv9rH1Z305P1mJqmFXXq/LBr1B0y5O3ccNE3jU5m0Rn4WS4ML
 TIt478tZfUwifwTrfWKAHsuxmuuOLjEXREk+jk9NZXLKNl98nn57fdJOsl5ExrcW
 WpU17VUe3NihEa6XYPJYDLfUPfsD/E61fsvNX2gqcWJzPEnQnP0dBHzAOQqpu5Gd
 muvyFdDB8iaJ2j8RKPh/qxJftB0lVfIdnAsfuCugc0hC1Lw3LWhACtGtJRLb14JO
 Y7hi44GpuA00MX+QewoOPKat03j1TUQ5tKr36F3GymsLnzkDtwZ5x3GNsIT/zP2F
 ttGAYv8DHVttpdctspsw+9gcZRPdmmGG2nxcWLuxG+1ak0Wwb9ySHRQKRm41O7QV
 vXzRpQaBQWvIqMF0JGsB6/9tyULPvxkIIizJQTHm8MwcKXI+z2HR5wqS+e1oO7Zr
 Dk+oS9TZ6Tj42pNDiO0H
 =VRMu
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-defconfig-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM64 Based defconfig Updates for v4.17" from Andy Gross:

* Enable cpufreq governors, QCOM TSENS, and QCOM APCS driver

* tag 'qcom-arm64-defconfig-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: defconfig: enable more cpufreq governors
  arm64: defconfig: enable thermal sensor on QCOM platforms
  arm64: defconfig: Enable the APCS IPC driver on Qualcomm platforms

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:26:32 +02:00
Arnd Bergmann
fa00c449b7 This augments the RealView and Versatile defconfig to use the PL111
DRM driver rather than the old fbdev driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJasF+5AAoJEEEQszewGV1zJgkQAJTBwdiHz27RVKEONPkPcnFd
 v95Molxg55Zyj38jJiLx4TVbNuIdshafh8GD584Au4Pc7mkqLoYnqPKJXRMAshPG
 k77UJgJkbUYhY1/WrxIi9WmuPr7UEaKz1xCl37cKU9tu7tNMm5K89xAsj9Kk9/D+
 PgAMza/G4h13UiEN/HWa4uwzjuy+HQWPji2kNJm8k3Vt/fd7eFfUK8POBJPLXP9z
 FCg5CncgRfbpExM1wt305yBX5RxNJsL86wV/BiOGPeaJ1zvx6jOQsCjp527SehMi
 w6icPRAb4pRibDmtMXudLxh/YiZd3RsrIktC8HHdg48cdEf8x8/30POM5sy5sIqs
 uQABdCIRQQI2tLF2ljIt5LKFmVykC/JTYWF0t+0faV6GICL2NuXiiRY8jINgK+rD
 dRoNtqz+0LH0p0Kkb3diyP8kt0p8O9iso0SlliKkrfvGW8Kcy8rok/qB0CbQnE2u
 nNycoarV48P+IH7Q1AMEca6SI5/rs3j0v0v1/oc6UoPmx6VGcNwUbfI/ylpo0ckC
 MMEborBmQBKnm9BosTRgweDuLMuz94nZti82KgoNvoqPyukcmoYFYqqfuak6aaVi
 EAE3MFNl+pte1rUx/YBO4ks9LgoxMOezY1VNZYE7hM6OqOB8U1RlHB2vjQN7mFpK
 KupmpNphbEi010ls2v8C
 =Yh10
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-versatile-drm-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

Pull "defconfig changes for Versatile DRM" from Linus Walleij:

This augments the RealView and Versatile defconfig to use the PL111
DRM driver rather than the old fbdev driver.

* tag 'armsoc-versatile-drm-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: defconfig: Configure Versatile boards to use PL111 DRM
  ARM: defconfig: Update Versatile defconfig
  ARM: defconfig: Switch RealView boards to use P111 DRM
  ARM: defconfig: Update RealView defconfig
2018-03-27 15:24:47 +02:00
Arnd Bergmann
8d361e4018 Amlogic defconfig fixes for v4.17
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlqwTPQACgkQWTcYmtP7
 xmURCA/7BU3RsiPbXxYsx2k7LzQaCvOpyNRU/cCNLv8BfWMZUNKRilr+dzCF5ImA
 OEeZv/Lp1fqn7ATfR5Qgq2bqnIVmBx54axKXKUgR30BzUKVIuSuhVvqnDZBCvX5C
 7JAzHnJojYek+BnZa11PCjsZsMurctprDzS/qsQ6E4TaeZ2jT+iDtzw26GZn0/RH
 e1NMrEwmQ1jN5QGxpdnHO5NKEI87wBTnz3HGLDpGzdFjHN5Q/cT3VPj9E/r6J7kC
 z4ER6WDfc1ZvR5wbE6pJk/ny17AY1eVSLnnrp1evPI1Hk6f1a/EIpx6NLy+5w22G
 Kvj+49f/c77L+FT+8lMzNjl2/xrUNk0z1kPVYGt/thXonGZfPz1M0vYBjQvy5/or
 puixIL7GiLpsQerk86/pT3crS3z1aRIytQBgkHFPyoFq07c2K7vi3Uc6Pj4zkoCo
 YI4mTt6Kg37WzEbGlhbriS3nc8QGOSDSwzHO66AidF9xOgsACZditza13yILvw6O
 mbWled0HwQqgBWxbfbSRrPDL6SPeaBVJXJH3CjLkgk4NshD94IFAR5ZqRuFI1kmB
 RXmhdB+kw1/4fOH6Ym9CLfTiLk94IFH9ikncKK+iJuFOaSTDpM56fyb2LF2HwKTl
 rESyM1RHfFWlYy0WjUlUa8ZKAmC3GEGis92LXFy0IY9p72TGNZc=
 =9d12
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/soc

Pull "Amlogic defconfig fixes for v4.17" from Kevin Hilman

* tag 'amlogic-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: defconfig: enable MESON EFUSE
2018-03-27 15:22:43 +02:00
Gregory CLEMENT
0fdd2cd674 arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:20:45 +02:00
Gregory CLEMENT
696241a4ae arm: dts: armada-385-db-ap: use SPDX-License-Identifier
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:20:44 +02:00
Gregory CLEMENT
681ca8a8d1 arm: dts: armada-388-rd: use SPDX-License-Identifier
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:20:43 +02:00
Gregory CLEMENT
34456c7acd arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:20:43 +02:00
Gregory CLEMENT
45d33aa5d7 arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:20:42 +02:00
Gregory CLEMENT
c04ceb9aee arm: dts: armada-370-db: use SPDX-License-Identifier
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:20:41 +02:00
Gregory CLEMENT
ca36855ef0 arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-03-27 15:20:34 +02:00
Dan Carpenter
5607dddbfc ALSA: pcm: potential uninitialized return values
Smatch complains that "tmp" can be uninitialized if we do a zero size
write.

Fixes: 02a5d6925c ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-27 15:20:19 +02:00
Bartosz Golaszewski
6cb9215bae gpio: mockup: fix a potential crash when creating debugfs entries
If we failed to create the top debugfs directory, we must not try to
create the child nodes. We currently only check if gpio_mockup_dbg_dir
is not NULL, but it can also contain an errno if debugfs is disabled
in build options. Use IS_ERR_OR_NULL() instead.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:18:20 +02:00
H. Nikolaus Schaller
3a711e0dd4 gpio: pca953x: add compatibility for pcal6524 and pcal9555a
The Pyra-Handheld originally used the tca6424 but recently we have
replaced it by the pin and package compatible pcal6524. So let's
add this to the bindings and the driver.

And while we are at it, the pcal9555a does not have a compatible entry
either but is already supported by the device id table.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:18:20 +02:00
Phil Edworthy
e6bf37736f gpio: dwapb: Add support for a bus clock
Enable an optional bus clock provided by DT.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:18:19 +02:00
Laura Abbott
13b5319e92 gpio: Remove VLA from xra1403 driver
The new challenge is to remove VLAs from the kernel
(see https://lkml.org/lkml/2018/3/7/621)

This patch replaces a VLA with an appropriate call to kmalloc_array.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:18:19 +02:00
Laura Abbott
48da181dac gpio: Remove VLA from MAX3191X driver
The new challenge is to remove VLAs from the kernel
(see https://lkml.org/lkml/2018/3/7/621)

This patch replaces several a VLA with an appropriate call to
kmalloc_array.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-and-tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27 15:18:06 +02:00
Arnd Bergmann
8045f29754 Defconfig updates for omap variants for v4.17 merge window
We need to enable MMC_SDHCI option in both omap2plus_defconfig and
 multi_v7_defconfig so systems are able to mount root when the dts files
 get updated for sdhci.
 
 Then let's update omap2plus_defconfig so we can patch it easier. And as
 Arnd noticed earlier, just running make savedefconfig will accidentally
 drop few Kconfig options. This is happening because some options are no
 longer available as loadable modules like LIRC. Or new dependencies have
 been added such as SND_OSSEMUL for selecting SOUND_OSS_CORE.
 
 So we first move the unchanged options around to their make savedefconfig
 suggested place, then update the options to prevent make savedefconfig
 dropping some options accidentally, and then finally drop the unused
 options.
 
 And after that we enable options DRM_OMAP and 8250_OMAP. These both have
 been around for years now. And we do have 8250_OMAP warn about console
 being redirected with SERIAL_8250_OMAP_TTYO_FIXUP option that is enabled
 by default. Some users may need to update their inittab to use ttyS*
 instead of ttyO* though. If this turns out to be a problem, we may want
 to introduce a separate compatible for 8250-omap. But I think we're good
 to go with the SERIAL_8250_OMAP_TTYO_FIXUP warning now. Let's not update
 multi_v7_defconfig yet though and first see how 8250_OMAP change plays
 out.
 
 We also enable few new options for PM on am335x and am437x, and CEC in
 omap2plus_defconfig. Naturally similar options can be later on added to
 multi_v7_defconfig, but in this series we only enable OTG, MUSB and the
 related PHYs in multi_v7_defconfig to make it more usable for distros.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlqr41kRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNxjQ/+MgYwuKg0LqS08IAWjhvX/IMusflvEeDg
 GT7hnBSV/8O9yqSwwqKYAKimxIZQxrYfEd6Bhv7RZqRfP91VruM+WRAi1ka1aglB
 uVRmoIlGV8hcvys84y0S3xyNUlX5GKit3EYtYjP/qZfJceonZyf89U2GD6tGIrb4
 uSsGhnqGjJ9cektWHG8SHrBfoxSGDmjWjdzcar6B4/oybwnvdCcjqlbu1+qfmvRC
 GICglk9ud2EeisCzSk7bvQIjVHsgziL9czoeyb37I0IeKfG+7RS5mUjdCM35KF5f
 OYgWkE1aqimhWG7ktZgI3VQQ89yNT3d1erhO8ZEsHTCS47vHJ4oYi6JXY+20Fp+0
 UQKhKNWmv7GHkH60Sgd85dK3p7NuuBEzTcNJjMbJLzyPYWnphk64W6wylwiwTSW0
 JWue4rax4t9akfaFfctF7k9F5Cskxj++t7aIg2xJutzEnuXR8L/p+u3dmEKEq9Jl
 0dfhrwM+ceznXNACgVsZK4QUnHQCp/WPIWZc7YEWrCjfgNU/Q4j3n4DyPhZ2gEXS
 h8l1ESLjUDoPy5GoX6Mfx06G2ImSOLdvFArWmVfi/uhPsaozi3cmrBEvCIRFRDg7
 8vWB1r+aK928mL6zUmmpCv5YoZl7f7Fxnu4vBDbGn3FDKLWUaVXesdU9GmTc0jq3
 KT55Il7PVxo=
 =JiEi
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.17/defconfig-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Defconfig updates for omap variants for v4.17 merge window"
from Tony Lindgren:

We need to enable MMC_SDHCI option in both omap2plus_defconfig and
multi_v7_defconfig so systems are able to mount root when the dts files
get updated for sdhci.

Then let's update omap2plus_defconfig so we can patch it easier. And as
Arnd noticed earlier, just running make savedefconfig will accidentally
drop few Kconfig options. This is happening because some options are no
longer available as loadable modules like LIRC. Or new dependencies have
been added such as SND_OSSEMUL for selecting SOUND_OSS_CORE.

So we first move the unchanged options around to their make savedefconfig
suggested place, then update the options to prevent make savedefconfig
dropping some options accidentally, and then finally drop the unused
options.

And after that we enable options DRM_OMAP and 8250_OMAP. These both have
been around for years now. And we do have 8250_OMAP warn about console
being redirected with SERIAL_8250_OMAP_TTYO_FIXUP option that is enabled
by default. Some users may need to update their inittab to use ttyS*
instead of ttyO* though. If this turns out to be a problem, we may want
to introduce a separate compatible for 8250-omap. But I think we're good
to go with the SERIAL_8250_OMAP_TTYO_FIXUP warning now. Let's not update
multi_v7_defconfig yet though and first see how 8250_OMAP change plays
out.

We also enable few new options for PM on am335x and am437x, and CEC in
omap2plus_defconfig. Naturally similar options can be later on added to
multi_v7_defconfig, but in this series we only enable OTG, MUSB and the
related PHYs in multi_v7_defconfig to make it more usable for distros.

* tag 'omap-for-v4.17/defconfig-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module
  ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants
  ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules
  ARM: omap2plus_defconfig: Enable 8250_OMAP
  ARM: omap2plus_defconfig: Switch to use omapdrm by default
  ARM: omap2plus_defconfig: Enable CEC
  ARM: omap2plus_defconfig: Enable am335x and am437x PM options
  ARM: omap2plus_defconfig: Drop unneeded options
  ARM: omap2plus_defconfig: Add SND_OSSEMUL
  ARM: omap2plus_defconfig: Update LIRC options
  ARM: omap2plus_defconfig: Select MFD_TI_LMU
  ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth
  ARM: omap2plus_defconfig: Update for moved options
  ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
  ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 15:17:53 +02:00