Commit graph

766,468 commits

Author SHA1 Message Date
David S. Miller
88fe352934 Merge branch 'sparc64-ADI'
Khalid Aziz says:

====================
Application Data Integrity feature introduced by SPARC M7

V12 changes:
This series is same as v10 and v11 and was simply rebased on 4.16-rc2
kernel and patch 11 was added to update signal delivery code to use the
new helper functions added by Eric Biederman. Can mm maintainers please
review patches 2, 7, 8 and 9 which are arch independent, and
include/linux/mm.h and mm/ksm.c changes in patch 10 and ack these if
everything looks good?

SPARC M7 processor adds additional metadata for memory address space
that can be used to secure access to regions of memory. This additional
metadata is implemented as a 4-bit tag attached to each cacheline size
block of memory. A task can set a tag on any number of such blocks.
Access to such block is granted only if the virtual address used to
access that block of memory has the tag encoded in the uppermost 4 bits
of VA. Since sparc processor does not implement all 64 bits of VA, top 4
bits are available for ADI tags. Any mismatch between tag encoded in VA
and tag set on the memory block results in a trap. Tags are verified in
the VA presented to the MMU and tags are associated with the physical
page VA maps on to. If a memory page is swapped out and page frame gets
reused for another task, the tags are lost and hence must be saved when
swapping or migrating the page.

A userspace task enables ADI through mprotect(). This patch series adds
a page protection bit PROT_ADI and a corresponding VMA flag
VM_SPARC_ADI. VM_SPARC_ADI is used to trigger setting TTE.mcd bit in the
sparc pte that enables ADI checking on the corresponding page. MMU
validates the tag embedded in VA for every page that has TTE.mcd bit set
in its pte. After enabling ADI on a memory range, the userspace task can
set ADI version tags using stxa instruction with ASI_MCD_PRIMARY or
ASI_MCD_ST_BLKINIT_PRIMARY ASI.

Once userspace task calls mprotect() with PROT_ADI, kernel takes
following overall steps:

1. Find the VMAs covering the address range passed in to mprotect and
set VM_SPARC_ADI flag. If address range covers a subset of a VMA, the
VMA will be split.

2. When a page is allocated for a VA and the VMA covering this VA has
VM_SPARC_ADI flag set, set the TTE.mcd bit so MMU will check the
vwersion tag.

3. Userspace can now set version tags on the memory it has enabled ADI
on. Userspace accesses ADI enabled memory using a virtual address that
has the version tag embedded in the high bits. MMU validates this
version tag against the actual tag set on the memory. If tag matches,
MMU performs the VA->PA translation and access is granted. If there is a
mismatch, hypervisor sends a data access exception or precise memory
corruption detected exception depending upon whether precise exceptions
are enabled or not (controlled by MCDPERR register). Kernel sends
SIGSEGV to the task with appropriate si_code.

4. If a page is being swapped out or migrated, kernel must save any ADI
tags set on the page. Kernel maintains a page worth of tag storage
descriptors. Each descriptors pointsto a tag storage space and the
address range it covers. If the page being swapped out or migrated has
ADI enabled on it, kernel finds a tag storage descriptor that covers the
address range for the page or allocates a new descriptor if none of the
existing descriptors cover the address range. Kernel saves tags from the
page into the tag storage space descriptor points to.

5. When the page is swapped back in or reinstantiated after migration,
kernel restores the version tags on the new physical page by retrieving
the original tag from tag storage pointed to by a tag storage descriptor
for the virtual address range for new page.

User task can disable ADI by calling mprotect() again on the memory
range with PROT_ADI bit unset. Kernel clears the VM_SPARC_ADI flag in
VMAs, merges adjacent VMAs if necessary, and clears TTE.mcd bit in the
corresponding ptes.

IOMMU does not support ADI checking. Any version tags embedded in the
top bits of VA meant for IOMMU, are cleared and replaced with sign
extension of the first non-version tag bit (bit 59 for SPARC M7) for
IOMMU addresses.

This patch series adds support for this feature in 11 patches:

Patch 1/11
  Tag mismatch on access by a task results in a trap from hypervisor as
  data access exception or a precide memory corruption detected
  exception. As part of handling these exceptions, kernel sends a
  SIGSEGV to user process with special si_code to indicate which fault
  occurred. This patch adds three new si_codes to differentiate between
  various mismatch errors.

Patch 2/11
  When a page is swapped or migrated, metadata associated with the page
  must be saved so it can be restored later. This patch adds a new
  function that saves/restores this metadata when updating pte upon a
  swap/migration.

Patch 3/11
  SPARC M7 processor adds new fields to control registers to support ADI
  feature. It also adds a new exception for precise traps on tag
  mismatch. This patch adds definitions for the new control register
  fields, new ASIs for ADI and an exception handler for the precise trap
  on tag mismatch.

Patch 4/11
  New hypervisor fault types were added by sparc M7 processor to support
  ADI feature. This patch adds code to handle these fault types for data
  access exception handler.

Patch 5/11
  When ADI is in use for a page and a tag mismatch occurs, processor
  raises "Memory corruption Detected" trap. This patch adds a handler
  for this trap.

Patch 6/11
  ADI usage is governed by ADI properties on a platform. These
  properties are provided to kernel by firmware. Thsi patch adds new
  auxiliary vectors that provide these values to userpsace.

Patch 7/11
  arch_validate_prot() is used to validate the new protection bits asked
  for by the userspace app. Validating protection bits may need the
  context of address space the bits are being applied to. One such
  example is PROT_ADI bit on sparc processor that enables ADI protection
  on an address range. ADI protection applies only to addresses covered
  by physical RAM and not other PFN mapped addresses or device
  addresses. This patch adds "address" to the parameters being passed to
  arch_validate_prot() to provide that context.

Patch 8/11
  When protection bits are changed on a page, kernel carries forward all
  protection bits except for read/write/exec. Additional code was added
  to allow kernel to clear PKEY bits on x86 but this requirement to
  clear other bits is not unique to x86. This patch extends the existing
  code to allow other architectures to clear any other protection bits
  as well on protection bit change.

Patch 9/11
  When a processor supports additional metadata on memory pages, that
  additional metadata needs to be copied to new memory pages when those
  pages are moved. This patch allows architecture specific code to
  replace the default copy_highpage() routine with arch specific
  version that copies the metadata as well besides the data on the page.

Patch 10/11
  This patch adds support for a user space task to enable ADI and enable
  tag checking for subsets of its address space. As part of enabling
  this feature, this patch adds to support manipulation of precise
  exception for memory corruption detection, adds code to save and
  restore tags on page swap and migration, and adds code to handle ADI
  tagged addresses for DMA.

Patch 11/11
  Update signal delivery code in arch/sparc/kernel/traps_64.c to use
  the new helper function force_sig_fault() added by commit
  f8ec66014f ("signal: Add send_sig_fault and force_sig_fault").

Changelog v12:

	  - Rebased to 4.16-rc2
	  - Added patch 11 to update signal delivery functions

Changelog v11:

	  - Rebased to 4.15

Changelog v10:

	  - Patch 1/10: Updated si_codes definitions for SEGV to match 4.14
	  - Patch 2/10: No changes
	  - Patch 3/10: Updated copyright
	  - Patch 4/10: No changes
	  - Patch 5/10: No changes
	  - Patch 6/10: Updated copyright
	  - Patch 7/10: No changes
	  - Patch 8/10: No changes
	  - Patch 9/10: No changes
	  - Patch 10/10: Added code to return from kernel path to set
	    PSTATE.mcde if kernel continues execution in another thread
	      (Suggested by Anthony)

Changelog v9:

	  - Patch 1/10: No changes
	  - Patch 2/10: No changes
	  - Patch 3/10: No changes
	  - Patch 4/10: No changes
	  - Patch 5/10: No changes
	  - Patch 6/10: No changes
	  - Patch 7/10: No changes
	  - Patch 8/10: No changes
	  - Patch 9/10: New patch
	  - Patch 10/10: Patch 9 from v8. Added code to copy ADI tags when
	    pages are migrated. Updated code to detect overflow and underflow
	      of addresses when allocating tag storage.

Changelog v8:

	  - Patch 1/9: No changes
	  - Patch 2/9: Fixed and erroneous "}"
	  - Patch 3/9: Minor print formatting change
	  - Patch 4/9: No changes
	  - Patch 5/9: No changes
	  - Patch 6/9: Added AT_ADI_UEONADI back
	  - Patch 7/9: Added addr parameter to powerpc arch_validate_prot()
	  - Patch 8/9: No changes
	  - Patch 9/9:
	    - Documentation updates
	      - Added an IPI on mprotect(...PROT_ADI...) call and
	      	  restore of TSTATE.MCDE on context switch
		  	  - Removed restriction on enabling ADI on read-only
			      memory
				- Changed kzalloc() for tag storage to use GFP_NOWAIT
				  - Added code to handle overflow and underflow when
				      allocating tag storage
				      		 - Replaced sun_m7_patch_1insn_range() with
						     sun4v_patch_1insn_range()
							- Added membar after restoring ADI tags in
							    copy_user_highpage()

Changelog v7:

	  - Patch 1/9: No changes
	  - Patch 2/9: Updated parameters to arch specific swap in/out
	    handlers
	    - Patch 3/9: No changes
	    - Patch 4/9: new patch split off from patch 4/4 in v6
	    - Patch 5/9: new patch split off from patch 4/4 in v6
	    - Patch 6/9: new patch split off from patch 4/4 in v6
	    - Patch 7/9: new patch
	    - Patch 8/9: new patch
	    - Patch 9/9:
	      - Enhanced arch_validate_prot() to enable ADI only on
	      	  writable addresses backed by physical RAM
		  	   - Added support for saving/restoring ADI tags for each
			       ADI block size address range on a page on swap in/out
			       	   - copy ADI tags on COW
				     - Updated values for auxiliary vectors to not conflict
				         with values on other architectures to avoid conflict
					        in glibc
						   - Disable same page merging on ADI enabled pages
						     - Enable ADI only on writable addresses backed by
						         physical RAM
							 	  - Split parts of patch off into separate patches

Changelog v6:
	  - Patch 1/4: No changes
	  - Patch 2/4: No changes
	  - Patch 3/4: Added missing nop in the delay slot in
	    sun4v_mcd_detect_precise
	    - Patch 4/4: Eliminated instructions to read and write PSTATE
	      as well as MCDPER and PMCDPER on every access to userspace
	        addresses by setting PSTATE and PMCDPER correctly upon entry
		  into kernel

Changelog v5:
	  - Patch 1/4: No changes
	  - Patch 2/4: Replaced set_swp_pte_at() with new architecture
	    functions arch_do_swap_page() and arch_unmap_one() that
	      suppoprt architecture specific actions to be taken on page
	        swap and migration
		- Patch 3/4: Fixed indentation issues in assembly code
		- Patch 4/4:
		  - Fixed indentation issues and instrcuctions in assembly
		      code
			- Removed CONFIG_SPARC64 from mdesc.c
			  - Changed to maintain state of MCDPER register in thread
			      info flags as opposed to in mm context. MCDPER is a
			      	     per-thread state and belongs in thread info flag as
				     		  opposed to mm context which is shared across threads.
						  	    Added comments to clarify this is a lazily maintained
							    	    state and must be updated on context switch and
								    	    copy_process()
									    		   - Updated code to use the new arch_do_swap_page() and
											       arch_unmap_one() functions

Testing:

- All functionality was tested with 8K normal pages as well as hugepages
  using malloc, mmap and shm.
- Multiple long duration stress tests were run using hugepages over 2+
  months. Normal pages were tested with shorter duration stress tests.
- Tested swapping with malloc and shm by reducing max memory and
  allocating three times the available system memory by active processes
  using ADI on allocated memory. Ran through multiple hours long runs of
  this test.
- Tested page migration with malloc and shm by migrating data pages of
  active ADI test process using migratepages, back and forth between two
  nodes every few seconds over an hour long run. Verified page migration
  through /proc/<pid>/numa_maps.
- Tested COW support using test that forks children that read from
  ADI enabled pages shared with parent and other children and write to
  them as well forcing COW.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:59 -07:00
Khalid Aziz
b9fa03656b sparc64: Update signal delivery to use new helper functions
Commit f8ec66014f ("signal: Add send_sig_fault and force_sig_fault")
added new helper functions to streamline signal delivery. This patch
updates signal delivery for new/updated handlers for ADI related
exceptions to use the helper function.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:48 -07:00
Khalid Aziz
74a0496748 sparc64: Add support for ADI (Application Data Integrity)
ADI is a new feature supported on SPARC M7 and newer processors to allow
hardware to catch rogue accesses to memory. ADI is supported for data
fetches only and not instruction fetches. An app can enable ADI on its
data pages, set version tags on them and use versioned addresses to
access the data pages. Upper bits of the address contain the version
tag. On M7 processors, upper four bits (bits 63-60) contain the version
tag. If a rogue app attempts to access ADI enabled data pages, its
access is blocked and processor generates an exception. Please see
Documentation/sparc/adi.txt for further details.

This patch extends mprotect to enable ADI (TSTATE.mcde), enable/disable
MCD (Memory Corruption Detection) on selected memory ranges, enable
TTE.mcd in PTEs, return ADI parameters to userspace and save/restore ADI
version tags on page swap out/in or migration. ADI is not enabled by
default for any task. A task must explicitly enable ADI on a memory
range and set version tag for ADI to be effective for the task.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:48 -07:00
Khalid Aziz
a4602b62d9 mm: Allow arch code to override copy_highpage()
Some architectures can support metadata for memory pages and when a
page is copied, its metadata must also be copied. Sparc processors
from M7 onwards support metadata for memory pages. This metadata
provides tag based protection for access to memory pages. To maintain
this protection, the tag data must be copied to the new page when a
page is migrated across NUMA nodes. This patch allows arch specific
code to override default copy_highpage() and copy metadata along
with page data upon migration.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:48 -07:00
Khalid Aziz
2c2d57b5e7 mm: Clear arch specific VM flags on protection change
When protection bits are changed on a VMA, some of the architecture
specific flags should be cleared as well. An examples of this are the
PKEY flags on x86. This patch expands the current code that clears
PKEY flags for x86, to support similar functionality for other
architectures as well.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:47 -07:00
Khalid Aziz
9035cf9a97 mm: Add address parameter to arch_validate_prot()
A protection flag may not be valid across entire address space and
hence arch_validate_prot() might need the address a protection bit is
being set on to ensure it is a valid protection flag. For example, sparc
processors support memory corruption detection (as part of ADI feature)
flag on memory addresses mapped on to physical RAM but not on PFN mapped
pages or addresses mapped on to devices. This patch adds address to the
parameters being passed to arch_validate_prot() so protection bits can
be validated in the relevant context.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:47 -07:00
Khalid Aziz
c6202ca764 sparc64: Add auxiliary vectors to report platform ADI properties
ADI feature on M7 and newer processors has three important properties
relevant to userspace apps using ADI capabilities - (1) Size of block of
memory an ADI version tag applies to, (2) Number of uppermost bits in
virtual address used to encode ADI tag, and (3) The value M7 processor
will force the ADI tags to if it detects uncorrectable error in an ADI
tagged cacheline. Kernel can retrieve these properties for a platform
through machine description provided by the firmware. This patch adds
code to retrieve these properties and report them to userspace through
auxiliary vectors.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:46 -07:00
Khalid Aziz
94addb3530 sparc64: Add handler for "Memory Corruption Detected" trap
M7 and newer processors add a "Memory corruption Detected" trap with
the addition of ADI feature. This trap is vectored into kernel by HV
through resumable error trap with error attribute for the resumable
error set to 0x00000800.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:46 -07:00
Khalid Aziz
52df948d1b sparc64: Add HV fault type handlers for ADI related faults
ADI (Application Data Integrity) feature on M7 and newer processors
adds new fault types for hypervisor - Invalid ASI and MCD disabled.
This patch expands data access exception handler to handle these
faults.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:46 -07:00
Khalid Aziz
750375003d sparc64: Add support for ADI register fields, ASIs and traps
SPARC M7 processor adds new control register fields, ASIs and a new
trap to support the ADI (Application Data Integrity) feature. This
patch adds definitions for these register fields, ASIs and a handler
for the new precise memory corruption detected trap.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:45 -07:00
Khalid Aziz
ca827d55eb mm, swap: Add infrastructure for saving page metadata on swap
If a processor supports special metadata for a page, for example ADI
version tags on SPARC M7, this metadata must be saved when the page is
swapped out. The same metadata must be restored when the page is swapped
back in. This patch adds two new architecture specific functions -
arch_do_swap_page() to be called when a page is swapped in, and
arch_unmap_one() to be called when a page is being unmapped for swap
out. These architecture hooks allow page metadata to be saved if the
architecture supports it.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:45 -07:00
Khalid Aziz
d84bb709aa signals, sparc: Add signal codes for ADI violations
SPARC M7 processor introduces a new feature - Application Data
Integrity (ADI). ADI allows MMU to  catch rogue accesses to memory.
When a rogue access occurs, MMU blocks the access and raises an
exception. In response to the exception, kernel sends the offending
task a SIGSEGV with si_code that indicates the nature of exception.
This patch adds three new signal codes specific to ADI feature:

1. ADI is not enabled for the address and task attempted to access
   memory using ADI
2. Task attempted to access memory using wrong ADI tag and caused
   a deferred exception.
3. Task attempted to access memory using wrong ADI tag and caused
   a precise exception.

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 07:38:45 -07:00
Sven Eckelmann
fc04fdb2c8 batman-adv: Fix skbuff rcsum on packet reroute
batadv_check_unicast_ttvn may redirect a packet to itself or another
originator. This involves rewriting the ttvn and the destination address in
the batadv unicast header. These field were not yet pulled (with skb rcsum
update) and thus any change to them also requires a change in the receive
checksum.

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Fixes: a73105b8d4 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-18 13:20:32 +01:00
Sven Eckelmann
48881ed56b batman-adv: Add missing include for EPOLL* constants
Fixes: a9a08845e9 ("vfs: do bulk POLL* -> EPOLL* replacement")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-18 09:58:23 +01:00
Himanshu Jha
211d71af69 Staging: iio: accel: adis16201: Adjust argument to match open parentheses
In adis16201_read_raw() adjust an argument to match an open parentheses
using tabs and spaces.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-18 08:35:09 +00:00
Himanshu Jha
58f368f509 Staging: iio: accel: adis16201: Prefer reverse christmas tree ordering
Prefer reverse christmas tree ordering of declarations to improve
readability.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-18 08:33:46 +00:00
Himanshu Jha
e7f3bfb7eb Staging: iio: accel: adis16201: Use sign_extend32 function
Use sign_extned32() for 32 bit sign extending rather than hard coding.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-18 08:33:00 +00:00
Himanshu Jha
57f9386405 Staging: iio: accel: adis16201: Add comments about units in read_raw()
Clarify the conversion and formation of resultant data in the
adis16201_read_raw() with sufficient comments and remove the unnecessary
comments.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-18 08:31:40 +00:00
Himanshu Jha
0d0f97d896 Staging: iio: accel: adis16201: Group register definitions
Group register definitions with its register field bits to improve
readability and easy identification. A small comment is also added to
denote the purpose/functionality of the grouped register definitions.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-18 08:29:26 +00:00
Himanshu Jha
a58efed313 Staging: iio: accel: adis16201: Add _REG suffix to registers
Add a _REG suffix to distinguish between registers and the register bit
fileds.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-18 08:24:11 +00:00
Himanshu Jha
395f42cb38 Staging: iio: accel: adis16201: Remove unnecessary comments
Remove few unnecessary comments since the macro definitions clearly
justify their purpose.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-18 08:21:51 +00:00
Himanshu Jha
241b91aee5 Staging: iio: accel: adis16201: Rename few macro definitions
Rename the macro definitions with suitable names specifying their
purpose.

* ADIS16201_STARTUP_DELAY_MS: Remove the comment specifying the delay in
  microseconds and rename it with addtition of _MS suffix.

* ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH: Rename the macro to make it
  similar to other misc control registers which denotes the data ready
  polarity.

* ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT: Rename to denote it is a
  failure bit.

* ADIS16201_GLOB_CMD_FACTORY_RESET: Remove ambiguous _CAL suffix and add
  _RESET suffix instead to denote factory reset command.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-18 08:09:00 +00:00
Arvind Yadav
be5acd246d rpmsg: smd: use put_device() if device_register fail
if device_register() returned an error! Always use put_device()
to give up the reference initialized. unregister device for
other return error.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-17 21:46:19 -07:00
Arvind Yadav
a9011726c4 rpmsg: glink: use put_device() if device_register fail
if device_register() returned an error! Always use put_device()
to give up the reference initialized. And unregister device for
other return error.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-17 21:45:57 -07:00
Andrew Lunn
76f38f1f3c net: dsa: mv88e6xxx: Fix IRQ when loading module
Handle polled interrupts correctly when loading the module.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 294d711ee8 ("net: dsa: mv88e6xxx: Poll when no interrupt defined")
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:24:48 -04:00
Arnd Bergmann
202fbf4865 of: unittest: move misplaced function declaration
The overlay_data_apply() declaration is outside of the #ifdef that contains
both the user and the definition, causing a compile-time warning in
some configurations:

drivers/of/unittest.c:48:19: error: 'overlay_data_apply' declared 'static' but never defined [-Werror=unused-function]
 static int __init overlay_data_apply(const char *overlay_name, int *overlay_id);

This moves the declaration into the #ifdef section.

Fixes: 39a751a4cb ("of: change overlay apply input data from unflattened to FDT")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-17 19:15:26 -05:00
David S. Miller
3661daa66f Merge branch 'selftests-pmtu-Add-further-vti-vti6-MTU-and-PMTU-tests'
Stefano Brivio says:

====================
selftests: pmtu: Add further vti/vti6 MTU and PMTU tests

Patches 5/10 to 10/10 add tests to verify default MTU assignment
for vti4 and vti6 interfaces, to check that MTU values set on new
link and link changes are properly taken and validated, and to
verify PMTU exceptions on vti4 interfaces.

Patch 1/10 reverses function return codes as suggested by David
Ahern.

Patch 2/10 fixes the helper to fetch exceptions MTU to run in the
passed namespace.

Patches 3/10 and 4/10 are preparation work to make it easier to
introduce those tests.

v2: Reverse return codes, and make output prettier in 4/9 by
    using padded printf, test descriptions and buffered error
    strings. Remove accidental output to /dev/kmsg from 10/10
    (was 9/9).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
1fad59ea1c selftests: pmtu: Add pmtu_vti6_link_change_mtu test
This test checks that MTU configured from userspace is used on
link creation and changes, and that when it's not passed from
userspace, it's calculated properly from the MTU of the lower
layer.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
8b6022fc78 selftests: pmtu: Add pmtu_vti6_link_add_mtu test
Same as pmtu_vti4_link_add_mtu test, but for IPv6.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
719e121574 selftests: pmtu: Add pmtu_vti4_link_add_mtu test
This test checks that MTU given on vti link creation is actually
configured, and that tunnel is not created with an invalid MTU
value.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
5e84430bb8 selftests: pmtu: Add test_pmtu_vti4_exception test
This test checks that PMTU exceptions are created only when
needed on IPv4 routes with vti and xfrm, and their PMTU value is
checked as well.

We can't adopt the same approach as test_pmtu_vti6_exception()
here, because on IPv4 administrative MTU changes won't be
reflected directly on PMTU.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
35b49424b8 selftests: pmtu: Add pmtu_vti6_default_mtu test
Same as pmtu_vti4_default_mtu, but on IPv6 with vti6.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
a41c789bdc selftests: pmtu: Add pmtu_vti4_default_mtu test
This test checks that the MTU assigned by default to a vti (IPv4)
interface created on top of veth is simply veth's MTU minus the
length of the encapsulated IPv4 header.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
36455bd1e9 selftests: pmtu: Introduce support for multiple tests
Introduce list of tests and their descriptions, and loop on it
in main body.

Tests will now just take care of calling setup with a list of
"units" they need, and return 0 on success, 1 on failure, 2 if
the test had to be skipped.

Main script body will take care of displaying results and
cleaning up after every test. Introduce guard variable so that
we don't clean up twice in case of interrupts or unexpected
failures.

The pmtu_vti6_exception test can now run its third step even if
the previous one failed, as we can return values from it.

Also introduce support to display test descriptions, and display
aligned OK/FAIL/SKIP test outcomes. Buffer error strings so that
in case of failure we can display them right under the outcome
for each test.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
f2c929feec selftests: pmtu: Factor out MTU parsing helper
...so that it can be used for any iproute command output.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:14 -04:00
Stefano Brivio
822d2f86c4 selftests: pmtu: Use namespace command prefix to fetch route mtu
In 7af137b72131 ("selftests: net: Introduce first PMTU test") I
accidentally assumed route_get_* helpers would run from a single
namespace. Make them a bit more generic, by passing the
namespace command prefix as a parameter instead.

Fixes: 7af137b72131 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:13 -04:00
Stefano Brivio
380e29a6b7 selftests: pmtu: Reverse return codes of functions
David suggests it's more intuitive to return non-zero on
failures, and zero on success.

No need to introduce tail 'return 0' in functions, they will
return the exit code of the last command anyway.

Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:15:13 -04:00
David S. Miller
fe2d55d295 Merge branch 'ibmvnic-Update-TX-pool-and-TX-routines'
Thomas Falcon says:

====================
ibmvnic: Update TX pool and TX routines

This patch restructures the TX pool data structure and provides a
separate TX pool array for TSO transmissions. This is already used
in some way due to our unique DMA situation, namely that we cannot
use single DMA mappings for packet data. Previously, both buffer
arrays used the same pool entry. This restructuring allows for
some additional cleanup in the driver code, especially in some
places in the device transmit routine.

In addition, it allows us to more easily track the consumer
and producer indexes of a particular pool. This has been
further improved by better tracking of in-use buffers to
prevent possible data corruption in case an invalid buffer
entry is used.

v5: Fix bisectability mistake in the first patch. Removed
    TSO-specific data in a later patch when it is no longer used.

v4: Fix error in 7th patch that causes an oops by using
    the older fixed value for number of buffers instead
    of the respective field in the tx pool data structure

v3: Forgot to update TX pool cleaning function to handle new data
    structures. Included 7th patch for that.

v2: Fix typo in 3/6 commit subject line
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:40 -04:00
Thomas Falcon
76c15c911b ibmvnic: Remove unused TSO resources in TX pool structure
Finally, remove the TSO-specific fields in the TX pool
strcutures. These are no longer needed with the introduction
of separate buffer pools for TSO transmissions.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:39 -04:00
Thomas Falcon
e9e1e97884 ibmvnic: Update TX pool cleaning routine
Update routine that cleans up any outstanding transmits that
have not received completions when the device needs to close.
Introduces a helper function that cleans one TX pool to make
code more readable.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:39 -04:00
Thomas Falcon
86b61a5f2e ibmvnic: Improve TX buffer accounting
Improve TX pool buffer accounting to prevent the producer
index from overruning the consumer. First, set the next free
index to an invalid value if it is in use. If next buffer
to be consumed is in use, drop the packet.

Finally, if the transmit fails for some other reason, roll
back the consumer index and set the free map entry to its original
value. This should also be done if the DMA map fails.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:39 -04:00
Thomas Falcon
06b3e35788 ibmvnic: Update TX and TX completion routines
Update TX and TX completion routines to account for TX pool
restructuring. TX routine first chooses the pool depending
on whether a packet is GSO or not, then uses it accordingly.

For the completion routine to know which pool it needs to use,
set the most significant bit of the correlator index to one
if the packet uses the TSO pool. On completion, unset the bit
and use the correlator index to release the buffer pool entry.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:39 -04:00
Thomas Falcon
3205306c6b ibmvnic: Update TX pool initialization routine
Introduce function that initializes one TX pool. Use that to
create each pool entry in both the standard TX pool and TSO
pool arrays.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:39 -04:00
Thomas Falcon
fb79421c3c ibmvnic: Update release TX pool routine
Introduce function that frees one TX pool.  Use that to release
each pool in both the standard TX pool and TSO pool arrays.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:39 -04:00
Thomas Falcon
e26dc25bc0 ibmvnic: Update and clean up reset TX pool routine
Update TX pool reset routine to accommodate new TSO pool array. Introduce
a function that resets one TX pool, and use that function to initialize
each pool in both pool arrays.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:39 -04:00
Thomas Falcon
4bd95a51b6 ibmvnic: Generalize TX pool structure
Remove some unused fields in the structure and include values
describing the individual buffer size and number of buffers in
a TX pool. This allows us to use these fields for TX pool buffer
accounting as opposed to using hard coded values. Include a new
pool array for TSO transmissions.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:12:39 -04:00
Al Viro
d47d08c8ca sctp: use proc_remove_subtree()
use proc_remove_subtree() for subtree removal, both on setup failure
halfway through and on teardown.  No need to make simple things
complex...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:11:22 -04:00
David S. Miller
90e2c7a124 Merge branch 'hv_netvsc-minor-enhancements'
Stephen Hemminger says:

====================
hv_netvsc: minor enhancements

A couple of small things for net-next
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:10:27 -04:00
Stephen Hemminger
ec9663812f hv_netvsc: add trace points
This adds tracepoints to the driver which has proved useful in
debugging startup and shutdown race conditions.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:10:27 -04:00
Stephen Hemminger
0e96460e62 hv_netvsc: pass netvsc_device to rndis halt
The caller has a valid pointer, pass it to rndis_filter_halt_device
and avoid any possible RCU races here.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 20:10:27 -04:00