Commit graph

766,468 commits

Author SHA1 Message Date
Chris Wilson
82813ba9b4 drm/i915: Only prune fences after wait-for-all
Currently, we only allow ourselves to prune the fences so long as
all the waits completed (i.e. all the fences we checked were signaled),
and that the reservation snapshot did not change across the wait.
However, if we only waited for a subset of the reservation object, i.e.
just waiting for the last writer to complete as opposed to all readers
as well, then we would erroneously conclude we could prune the fences as
indeed although all of our waits were successful, they did not represent
the totality of the reservation object.

v2: We only need to check the shared fences due to construction (i.e.
all of the shared fences will be later than the exclusive fence, if
any).

Fixes: e54ca97747 ("drm/i915: Remove completed fences after a wait")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307171303.29466-1-chris@chris-wilson.co.uk
(cherry picked from commit fa73055b84)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-12 11:24:44 -07:00
Mustamin B Mustaffa
e8cd7143e2 drm/i915: Enable VBT based BL control for DP
Currently, BXT_PP is hardcoded with value '0'.
It practically disabled eDP backlight on MRB (BXT) platform.

This patch will tell which BXT_PP registers (there are two set of
PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing
table) and this will enabled eDP backlight controller on MRB (BXT)
platform.

v2:
 - Remove unnecessary information in commit message.
 - Assign vbt.backlight.controller to a backlight_controller variable and
   return the variable value.
v3:
 - Rebased to latest code base.
 - updated commit title.

Signed-off-by: Mustamin B Mustaffa <mustamin.b.mustaffa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227030734.37901-1-mustamin.b.mustaffa@intel.com
(cherry picked from commit 73c0fcac97)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-12 11:23:47 -07:00
Jerome Brunet
99652a469d clk: migrate the count of orphaned clocks at init
The orphan clocks reparents should migrate any existing count from the
orphan clock to its new acestor clocks, otherwise we may have
inconsistent counts in the tree and end-up with gated critical clocks

Assuming we have two clocks, A and B.
* Clock A has CLK_IS_CRITICAL flag set.
* Clock B is an ancestor of A which can gate. Clock B gate is left
  enabled by the bootloader.

Step 1: Clock A is registered. Since it is a critical clock, it is
enabled. The clock being still an orphan, no parent are enabled.

Step 2: Clock B is registered and reparented to clock A (potentially
through several other clocks). We are now in situation where the enable
count of clock A is 1 while the enable count of its ancestors is 0, which
is not good.

Step 3: in lateinit, clk_disable_unused() is called, the enable_count of
clock B being 0, clock B is gated and and critical clock A actually gets
disabled.

This situation was found while adding fdiv_clk gates to the meson8b
platform.  These clocks parent clk81 critical clock, which is the mother
of all peripheral clocks in this system. Because of the issue described
here, the system is crashing when clk_disable_unused() is called.

The situation is solved by reverting
commit f8f8f1d044 ("clk: Don't touch hardware when reparenting during registration").
To avoid breaking again the situation described in this commit
description, enabling critical clock should be done before walking the
orphan list. This way, a parent critical clock may not be accidentally
disabled due to the CLK_OPS_PARENT_ENABLE mechanism.

Fixes: f8f8f1d044 ("clk: Don't touch hardware when reparenting during registration")
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2018-03-12 11:10:47 -07:00
Ranjani Sridharan
bde8b3887a
ASoC: topology: create TLV data for dapm widgets
This patch adds the change required to create the TLV data
for dapm widget kcontrols from topology. This also fixes the following
TLV read error shown in amixer while showing the card control contents.
"amixer: Control hw:1 element TLV read error: No such device or address"

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 11:08:18 -07:00
Sylwester Nawrocki
ca7796683f
ASoC: samsung: Drop uneeded RCLKSRC setting in the Snow driver
The RCLKSRC mux input 0 is a default configuration after reset, so
there is no need for this explicit snd_soc_dai_set_sysclk() call.
Also, this static mux clock configuration can be specified in DT.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 11:05:12 -07:00
Arnd Bergmann
954b54dea0 ixgbevf: fix unused variable warning
The new ixgbevf_set_rx_buffer_len() function causes a harmless warnings
in configurations with large page size:

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_set_rx_buffer_len':
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1758:15: error: unused variable 'max_frame' [-Werror=unused-variable]

This rephrases the code so that the compiler can see the use of that
variable, making it slightly easier to read in the process.

Fixes: f15c5ba5b6 ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12 11:05:11 -07:00
Tonghao Zhang
e656805c1b ixgbe: Add receive length error counter
ixgbe enabled rlec counter and the rx_error used it.
We can export the counter directly via ethtool -S ethX.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12 11:03:32 -07:00
Sylwester Nawrocki
995e73e55f
ASoC: samsung: i2s: Fix rclk_srcrate handling
As the RCLK clock may be updated through the common clk API before each
snd_soc_dai_ops::trigger call, it is not enough to update i2s->rclk_srcrate
only once after it has been initially set to 0. To avoid wrong PSR values
we always get RCLK frequency from the CLK_I2S_RCLK_SRC clock, when that
clock is available.

Fixes: e1417fdf3011 "ASoC: samsung: i2s: Ensure the RCLK rate is properly determined"
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 11:03:13 -07:00
Mark Brown
3600cd78d7
Merge branch 'topic/of' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-samsung 2018-03-12 11:02:30 -07:00
Shannon Nelson
5c4aa45863 ixgbe: remove unneeded ipsec state free callback
With commit 7f05b467a7 ("xfrm: check for xdo_dev_state_free")
we no longer need to add an empty callback function
to the driver, so now let's remove the useless code.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12 10:59:42 -07:00
Sylwester Nawrocki
946857636d
ASoC: Add snd_soc_of_put_dai_link_codecs() helper function
The code for dereferencing device nodes in the 'codecs' array is moved
to a separate function so we can avoid open coding that in drivers.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 10:57:43 -07:00
Geert Uytterhoeven
0076096b35 ARM: dts: exynos: Fix "debounce-interval" property misspelling in Midas
"debounce-inteval" was never supported.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-03-12 18:56:04 +01:00
Linus Torvalds
fc6eabbbf8 NFS client bugfixes for Linux 4.16
Hightlights include the following stable fixes:
 
 - NFS: Fix an incorrect type in struct nfs_direct_req
 - pNFS: Prevent the layout header refcount going to zero in pnfs_roc()
 - NFS: Fix unstable write completion
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaprb9AAoJEGcL54qWCgDysK0P/Rwyc7fhcs4CvxETQT0LhbbB
 P6XDAb5pBeU+ca8ZWzqlpe1uKc0z5ykuTLuxLt2QvSb9+6h+8T1gxOa5SibehnwY
 6UizLDgHMuY2V4wqm4XLHiZX7J0Evdo4rgNCp7qq2/TinBPYKQsqIz34+s9BZDti
 6LG6WiVhOtkhs6s/sRbAn+FfMbSiQn54iQIgFPeO+3zEzaaLzUZqlVHO5yjxVnxh
 6oYGkEPVzP09URUO/HJ1VTUZJnso1/axEcH9qhuJzZ+pANCpuBjSMoFzzE6oI2mD
 dfD8UJZjwqLb7AsFhgSQUrDXzaI0Xg7ccrImtCp4QLlTjja3TlOYMYbK9kDRHC1/
 kT93cSFSIeSGpqLVSdNyiz7pCh2Cps2U0JTbhwE0R1NEskWQPzSwY73jEwiA/bex
 JOZBxtjVZt8TgOKHxPO65rvQwaq3T31KrQSDLqv3JReI0epJeqng0h+pwiZluNAs
 TFjE1aP0l567A3qQnPrHrGZ4IIs8XYobZ+MBxf9x5PaRWnGoPUkhHXMP2j8JCnwa
 ofPBR4Mx5WhnsB7Z5vsYetHtmD99QbJ0+WH9ObilUFt6gUgXoXCrvexIUq+LD3DP
 HIIqfbSorAIlQxtCwEz7m85B7VEKByaCWj8OiFt5VVAreEhiazmsncsyh8R5fa88
 wJDxRe3QmNu7BEJ9NJKi
 =IQGX
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Hightlights include the following stable fixes:

   - NFS: Fix an incorrect type in struct nfs_direct_req

   - pNFS: Prevent the layout header refcount going to zero in
     pnfs_roc()

   - NFS: Fix unstable write completion"

* tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix unstable write completion
  pNFS: Prevent the layout header refcount going to zero in pnfs_roc()
  NFS: Fix an incorrect type in struct nfs_direct_req
2018-03-12 10:47:03 -07:00
Shannon Nelson
0ae418e6e2 ixgbe: fix ipsec trailer length
Fix up the Tx trailer length calculation.  We can't believe the
trailer len from the xstate information because it was calculated
before the packet was put together and padding added.  This bit
of code finds the padding value in the trailer, adds it to the
authentication length, and saves it so later we can put it into
the Tx descriptor to tell the device where to stop the checksum
calculation.

Fixes: 5925947047 ("ixgbe: process the Tx ipsec offload")
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12 10:44:59 -07:00
Shannon Nelson
68c1fb2d30 ixgbe: check for 128-bit authentication
Make sure the Security Association is using
a 128-bit authentication, since that's the only
size that the hardware offload supports.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12 10:36:04 -07:00
Peter Ujfalusi
dead99e857
ASoC: soc-io: Fix snd_soc_component_update_bits_legacy
After the codec to component conversion codecs with custom read/write
function will no longer able to use update_bits as their io callbacks are
registered at component->driver level and not in component level.

To not complicate the code further, lets just use the
snd_soc_component_read/snd_soc_component_write function and let them sort
out the correct io function to call.

Fixes: d0ff8ba57d ("ASoC: add Component level .read/.write")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 09:58:02 -07:00
Mark Brown
2889312616
Merge remote-tracking branches 'regmap/topic/debugfs' and 'regmap/topic/mmio-clk' into regmap-next 2018-03-12 09:50:42 -07:00
Mark Brown
493ea0c8a6
Merge remote-tracking branch 'regmap/topic/bulk' into regmap-next 2018-03-12 09:50:40 -07:00
Mark Brown
f981c6cc14
Merge remote-tracking branches 'regmap/fix/i2c' and 'regmap/fix/volatile' into regmap-linus 2018-03-12 09:50:35 -07:00
Mark Brown
aa584bada6
Merge remote-tracking branch 'regmap/fix/core' into regmap-linus 2018-03-12 09:50:32 -07:00
Mark Brown
d2f2bb8487
Merge remote-tracking branch 'regmap/fix/cache' into regmap-linus 2018-03-12 09:50:31 -07:00
David S. Miller
b747594829 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree, they are:

1) Fixed hashtable representation doesn't support timeout flag, skip it
   otherwise rules to add elements from the packet fail bogusly fail with
   EOPNOTSUPP.

2) Fix bogus error with 32-bits ebtables userspace and 64-bits kernel,
   patch from Florian Westphal.

3) Sanitize proc names in several x_tables extensions, also from Florian.

4) Add sanitization to ebt_among wormhash logic, from Florian.

5) Missing release of hook array in flowtable.
====================
2018-03-12 12:49:30 -04:00
Sylwester Nawrocki
b50c32bd28
ASoC: max98090: Add #sound-dai-cells property documentation
MAX98090 CODEC supports 1 input DAI, adding the #sound-dai-cells property
helps to reference the DAI in DT in a standard way.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 09:38:07 -07:00
Peter Ujfalusi
c9d066650c
ASoC: twl6040: Add back missing write callback
We need to have the write callback to use the code.

Fixes: 7480389fb0 ("ASoC: twl6040: replace codec to component")

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 09:37:11 -07:00
Bard Liao
ce571b80e2
ASoC: rt5659: Separate adc 1/2 clock control
The control bits of ADC 1 and 2 clock are different. We have to
separate it.

Signed-off-by: Zhong An <zhongan@pinecone.net>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 09:35:32 -07:00
Mark Brown
50b123087c
Merge branch 'fix/rt5659' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rt5659 2018-03-12 09:35:26 -07:00
Takashi Iwai
db45dc9540 ASoC: Fixes for v4.16
This is a fairly standard collection of fixes, there's no changes to the
 core here just a bunch of small device specific changes for single
 drivers plus an update to the MAINTAINERS file for the sgl5000.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlqmqZITHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0EVkB/9MrEZMqClZqWnolQJEFh6oGVRx78Lu
 kZmFoO2l4lYcZuRwbVn/nYYTsJzCUIOptvQT8Sx0jM6xoBpWHftP9zUQ6TTakezt
 vd/idrooS0Btbe/viiDt1ujkrrBlp8netS2IWWY66eJFQ8BrRwOkYWK+45YZFjAm
 GIZ5b6+cLrZqnrcHVLYTg9nAzYOMcfRn7ma9NNhtYlqKkKLhZgHgQh6QJuJKyrGe
 aZIjDbpbPQs594NH8rogbLOAJxfY5ib38Ah9OU3mHzzvK05kCARo9dU6dNs0boW8
 6GABdIAujX3za/qeApfpqhwnrM5N8QBD28BkPGvH60sxxTeO8Vwm91Uf
 =jIwC
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v4.16-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.16

This is a fairly standard collection of fixes, there's no changes to the
core here just a bunch of small device specific changes for single
drivers plus an update to the MAINTAINERS file for the sgl5000.
2018-03-12 17:30:38 +01:00
Bard Liao
3795e0c7d5
ASoC: rt5659: fix wrong control register for ADC2 power
The control register for ADC L2 and R2 is RT5659_PWR_DIG_1
not RT5659_PWR_DIG_2.

Signed-off-by: Zhong An <zhongan@pinecone.net>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 09:26:20 -07:00
Bard Liao
9849ef555c
ASoC: rt5659: fix wrong bit define for ADC L2 power.
RT5659_PWR_ADC_L2_BIT should be 2.

Signed-off-by: Zhong An <zhongan@pinecone.net>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-12 09:26:19 -07:00
Nikolay Borisov
ce3077ee80 direct-io: Remove unused DIO_SKIP_DIO_COUNT logic
This flag was added by fe0f07d08e ("direct-io: only inc/deci
inode->i_dio_count for file systems") as means to optimise the atomic
modificaiton of the variable for blockdevices. However with the advent
of 542ff7bf18 ("block: new direct I/O implementation") it became
unused. So let's remove it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-12 10:21:24 -06:00
Nikolay Borisov
c8f4c36f81 direct-io: Remove unused DIO_ASYNC_EXTEND flag
This flag was added by 6039257378 ("direct-io: add flag to allow aio
writes beyond i_size") to support XFS. However, with the rework of
XFS' DIO's path to use iomap in acdda3aae1 ("xfs: use iomap_dio_rw")
it became redundant. So let's remove it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-12 10:21:22 -06:00
Mark Brown
a3e39ed1f4
Merge remote-tracking branches 'asoc/fix/amd', 'asoc/fix/hdmi-codec', 'asoc/fix/rt5651', 'asoc/fix/samsung', 'asoc/fix/sgtl5000', 'asoc/fix/sunxi' and 'asoc/fix/wm-adsp' into asoc-linus 2018-03-12 09:14:07 -07:00
Gustavo A. R. Silva
2c81ee0a28 video: fbdev: via: remove VLA usage
In preparation to enabling -Wvla, remove VLA usage.

Also, fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:55 +01:00
Gustavo A. R. Silva
df7a84a8ba video: fbdev: vermilion: use 64-bit arithmetic instead of 32-bit
Cast _pitch_ to u64 in order to give the compiler complete information
about the proper arithmetic to use. Notice that this variable is
being used in a context that expects an expression of type u64
(64 bits, unsigned).

The expression pitch * var->yres_virtual is currently being evaluated
using 32-bit arithmetic and the result of the operation is being stored
into variable mem, which is a variable of type u64. Based on that,
chances are there is a potential integer overflow as a result of the
operation.

Addresses-Coverity-ID: 200655 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:54 +01:00
Vladimir Zapolskiy
a2a348014a video: of: display_timing: Remove of_display_timings_exist() function
Since introduction of of_display_timings_exist() function in commit
cc3f414cf2 ("video: add of helper for display timings/videomode") it
didn't attract any users, and the function has no potential, because
of_get_display_timings() covers its functionality and does more.

Drop the unused exported function from the kernel.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:54 +01:00
Mathieu Malaterre
9cbaf4d969 video: offb: Deallocate the color map
The function offb_destroy did not deallocate the color map leaving some
memory around after destruction. Call the color map deallocate function to
remove the memory leak.

Handle another case where color map should have been deallocated during an
error code path.

Fix memory leaks reported by kmemleak:

# dmesg
...
[ 1884.719941] kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xde3d9000 (size 512):
  comm "swapper", pid 1, jiffies 4294892827 (age 1906.784s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 aa aa aa aa aa aa aa aa  ................
    55 55 55 55 55 55 55 55 ff ff ff ff ff ff ff ff  UUUUUUUU........
  backtrace:
    [<f1433400>] fb_alloc_cmap_gfp+0x54/0x15c
    [<cb6b409b>] offb_init_nodriver+0x8e8/0xa3c
    [<b5a1c019>] offb_init+0xd0/0x164
    [<322f82a3>] do_one_initcall+0x4c/0x178
    [<b592db9f>] kernel_init_freeable+0x138/0x1cc
    [<2a17fa0e>] kernel_init+0x24/0x118
    [<4079749a>] ret_from_kernel_thread+0x5c/0x64
unreferenced object 0xde3d9200 (size 512):
  comm "swapper", pid 1, jiffies 4294892827 (age 1906.784s)
  hex dump (first 32 bytes):
    00 00 00 00 aa aa aa aa 00 00 00 00 55 55 aa aa  ............UU..
    55 55 55 55 ff ff ff ff 55 55 55 55 ff ff ff ff  UUUU....UUUU....
  backtrace:
    [<4bf3594d>] fb_alloc_cmap_gfp+0x6c/0x15c
    [<cb6b409b>] offb_init_nodriver+0x8e8/0xa3c
    [<b5a1c019>] offb_init+0xd0/0x164
    [<322f82a3>] do_one_initcall+0x4c/0x178
    [<b592db9f>] kernel_init_freeable+0x138/0x1cc
    [<2a17fa0e>] kernel_init+0x24/0x118
    [<4079749a>] ret_from_kernel_thread+0x5c/0x64
unreferenced object 0xde3d9600 (size 512):
  comm "swapper", pid 1, jiffies 4294892827 (age 1906.784s)
  hex dump (first 32 bytes):
    00 00 aa aa 00 00 aa aa 00 00 aa aa 00 00 aa aa  ................
    55 55 ff ff 55 55 ff ff 55 55 ff ff 55 55 ff ff  UU..UU..UU..UU..
  backtrace:
    [<23a3ea03>] fb_alloc_cmap_gfp+0x84/0x15c
    [<cb6b409b>] offb_init_nodriver+0x8e8/0xa3c
    [<b5a1c019>] offb_init+0xd0/0x164
    [<322f82a3>] do_one_initcall+0x4c/0x178
    [<b592db9f>] kernel_init_freeable+0x138/0x1cc
    [<2a17fa0e>] kernel_init+0x24/0x118
    [<4079749a>] ret_from_kernel_thread+0x5c/0x64

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:54 +01:00
Mathieu Malaterre
069ee21a82 fbdev: Fix loading of module radeonfb on PowerMac
When the linux kernel is build with (typical kernel ship with Debian
installer):

CONFIG_FB=y
CONFIG_FB_OF=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_FB_RADEON=m

The offb driver takes precedence over module radeonfb. It is then
impossible to load the module, error reported is:

[   96.551486] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
[   96.551526] radeonfb 0000:00:10.0: BAR 0: can't reserve [mem 0x98000000-0x9fffffff pref]
[   96.551531] radeonfb (0000:00:10.0): cannot request region 0.
[   96.551545] radeonfb: probe of 0000:00:10.0 failed with error -16

This patch reproduce the behavior of the module radeon, so as to make it
possible to load radeonfb when offb is first loaded, see
commit a56f7428d7 ("drm/radeon: Add early unregister of firmware fb's").

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Link: https://bugs.debian.org/826629#57
Link: https://bugzilla.kernel.org/show_bug.cgi?id=119741
Suggested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:54 +01:00
Ulf Magnusson
e3419c6aef video: fbdev: kconfig: Add help text to FB_I810_I2C
The FB_I810_I2C symbol previously had a blank help text, which was
removed in e9829ac4e5 ("video: fbdev: kconfig: Remove blank help
text").

Give it a proper help text, derived from commit 74f6ae84b2 ("[PATCH]
i810fb: Add > i2c/DDC support").

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Hans de Goede <j.w.r.degoede@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:53 +01:00
Ulf Magnusson
f06a51a08f video: console: kconfig: Remove AVR32 dep. from VGA_CONSOLE
The AVR32 symbol was removed in commit 26202873bb ("avr32: remove
support for AVR32 architecture").

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: LEROY Christophe <christophe.leroy@c-s.fr>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:53 +01:00
Ladislav Michl
c58cb8ae73 video: udlfb: Use already defined BPP constant
Replace const variable with already defined constant.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:53 +01:00
Ladislav Michl
115e77597e video: udlfb: Fix unaligned access
Driver generates lots of alignment trap exceptions on ARM.
Fix that by replacing typecasting of odd addresses with
byte shifting and remove uneccessary typecasting.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:53 +01:00
Ludovic Desroches
a81265222e video: fbdev: atmel_lcdfb: convert to use GPIO descriptors
Use GPIO descriptors instead of relying on the old method.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:52 +01:00
Arnd Bergmann
5908986ef3 video: fbdev: sis: avoid mismatched prototypes
Building with LTO enabled reveals some functions whose prototypes
in the header are different from the definition:

drivers/video/fbdev/sis/sis_main.h:765:0: error: type of 'SiS_SetCH70xxANDOR' does not match original declaration [-Werror=lto-type-mismatch]
 extern void  SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,

drivers/video/fbdev/sis/init301.c:8937:0: note: type mismatch in parameter 4
 SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,

drivers/video/fbdev/sis/init301.c:8937:0: note: type 'short unsigned int' should match type 'unsigned char'
drivers/video/fbdev/sis/init301.c:8937:0: note: 'SiS_SetCH70xxANDOR' was previously declared here

The root cause appears to be the way that header files are used in this
driver, where they contain both static variable and declarations for
symbols in other files.

To clean that up, I'm changing all mixed headers to only contain
declarations the way we normally do in C, or contain only static
variables, and move the rest to a more appropriate place.  Once that
is done, the headers can be included in the other files as well, and
guarantee that the prototypes match.

There are a few headers that now only contain static variables, and
I'm leaving those alone here as the patch is already too big. These
could be trivially moved into the respective .c files.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>,
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:52 +01:00
Corentin Labbe
1aa9b8ada0 video: remove unused kconfig SH_LCD_MIPI_DSI
SH_LCD_MIPI_DSI is unused since commit 18b6562c24 ("fbdev: sh_mipi_dsi:
remove driver") so no need to keep it.

Fixes: 18b6562c24 ("fbdev: sh_mipi_dsi: remove driver")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-03-12 17:06:52 +01:00
Al Viro
c19457f0ae d_delete(): get rid of trylock loop
just grab ->i_lock first; we have a positive dentry, nothing's going
to happen to inode

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-12 11:59:14 -04:00
John Ogness
c1d0c1a2b5 fs/dcache: Move dentry_kill() below lock_parent()
A subsequent patch will modify dentry_kill() to call lock_parent().
Move the dentry_kill() implementation "as is" below lock_parent()
first. This will help simplify the review of the subsequent patch
with dentry_kill() changes.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-12 11:59:13 -04:00
John Ogness
06080d100d fs/dcache: Remove stale comment from dentry_kill()
Commit 0d98439ea3 ("vfs: use lockred "dead" flag to mark unrecoverably
dead dentries") removed the `ref' parameter in dentry_kill() but its
documentation remained. Remove it.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-12 11:59:13 -04:00
Al Viro
0632a9ac7b take write_seqcount_invalidate() into __d_drop()
... and reorder it with making d_unhashed() true.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-12 11:59:12 -04:00
Greg Kroah-Hartman
95713fb8aa Revert "usb: core: Add "quirks" parameter for usbcore"
This reverts commit b27560e4d9 as it
breaks the build for some arches :(

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1d1d53f85ddd..70a7398c20e2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4368,6 +4368,61 @@

 	usbcore.nousb	[USB] Disable the USB subsystem

+	usbcore.quirks=
+			[USB] A list of quirks entries to supplement or
+			override the built-in usb core quirk list.  List
+			entries are separated by commas.  Each entry has
+			the form VID:PID:Flags where VID and PID are Vendor
+			and Product ID values (4-digit hex numbers) and
+			Flags is a set of characters, each corresponding
+			to a common usb core quirk flag as follows:
+				a = USB_QUIRK_STRING_FETCH_255 (string
+					descriptors must not be fetched using
+					a 255-byte read);
+				b = USB_QUIRK_RESET_RESUME (device can't resume
+					correctly so reset it instead);
+				c = USB_QUIRK_NO_SET_INTF (device can't handle
+					Set-Interface requests);
+				d = USB_QUIRK_CONFIG_INTF_STRINGS (device can't
+					handle its Configuration or Interface
+					strings);
+				e = USB_QUIRK_RESET (device can't be reset
+					(e.g morph devices), don't use reset);
+				f = USB_QUIRK_HONOR_BNUMINTERFACES (device has
+					more interface descriptions than the
+					bNumInterfaces count, and can't handle
+					talking to these interfaces);
+				g = USB_QUIRK_DELAY_INIT (device needs a pause
+					during initialization, after we read
+					the device descriptor);
+				h = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL (For
+					high speed and super speed interrupt
+					endpoints, the USB 2.0 and USB 3.0 spec
+					require the interval in microframes (1
+					microframe = 125 microseconds) to be
+					calculated as interval = 2 ^
+					(bInterval-1).
+					Devices with this quirk report their
+					bInterval as the result of this
+					calculation instead of the exponent
+					variable used in the calculation);
+				i = USB_QUIRK_DEVICE_QUALIFIER (device can't
+					handle device_qualifier descriptor
+					requests);
+				j = USB_QUIRK_IGNORE_REMOTE_WAKEUP (device
+					generates spurious wakeup, ignore
+					remote wakeup capability);
+				k = USB_QUIRK_NO_LPM (device can't handle Link
+					Power Management);
+				l = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL
+					(Device reports its bInterval as linear
+					frames instead of the USB 2.0
+					calculation);
+				m = USB_QUIRK_DISCONNECT_SUSPEND (Device needs
+					to be disconnected before suspend to
+					prevent spurious wakeup)
+			Example: quirks=0781:5580:bk,0a5c:5834:gij
+
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f4a548471f0f..42faaeead81b 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -11,6 +11,143 @@
 #include <linux/usb/hcd.h>
 #include "usb.h"

+struct quirk_entry {
+	u16 vid;
+	u16 pid;
+	u32 flags;
+};
+
+static DEFINE_MUTEX(quirk_mutex);
+
+static struct quirk_entry *quirk_list;
+static unsigned int quirk_count;
+
+static char quirks_param[128];
+
+static int quirks_param_set(const char *val, const struct kernel_param *kp)
+{
+	char *p, *field;
+	u16 vid, pid;
+	u32 flags;
+	size_t i;
+
+	mutex_lock(&quirk_mutex);
+
+	if (!val || !*val) {
+		quirk_count = 0;
+		kfree(quirk_list);
+		quirk_list = NULL;
+		goto unlock;
+	}
+
+	for (quirk_count = 1, i = 0; val[i]; i++)
+		if (val[i] == ',')
+			quirk_count++;
+
+	if (quirk_list) {
+		kfree(quirk_list);
+		quirk_list = NULL;
+	}
+
+	quirk_list = kcalloc(quirk_count, sizeof(struct quirk_entry),
+			     GFP_KERNEL);
+	if (!quirk_list) {
+		mutex_unlock(&quirk_mutex);
+		return -ENOMEM;
+	}
+
+	for (i = 0, p = (char *)val; p && *p;) {
+		/* Each entry consists of VID:PID:flags */
+		field = strsep(&p, ":");
+		if (!field)
+			break;
+
+		if (kstrtou16(field, 16, &vid))
+			break;
+
+		field = strsep(&p, ":");
+		if (!field)
+			break;
+
+		if (kstrtou16(field, 16, &pid))
+			break;
+
+		field = strsep(&p, ",");
+		if (!field || !*field)
+			break;
+
+		/* Collect the flags */
+		for (flags = 0; *field; field++) {
+			switch (*field) {
+			case 'a':
+				flags |= USB_QUIRK_STRING_FETCH_255;
+				break;
+			case 'b':
+				flags |= USB_QUIRK_RESET_RESUME;
+				break;
+			case 'c':
+				flags |= USB_QUIRK_NO_SET_INTF;
+				break;
+			case 'd':
+				flags |= USB_QUIRK_CONFIG_INTF_STRINGS;
+				break;
+			case 'e':
+				flags |= USB_QUIRK_RESET;
+				break;
+			case 'f':
+				flags |= USB_QUIRK_HONOR_BNUMINTERFACES;
+				break;
+			case 'g':
+				flags |= USB_QUIRK_DELAY_INIT;
+				break;
+			case 'h':
+				flags |= USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL;
+				break;
+			case 'i':
+				flags |= USB_QUIRK_DEVICE_QUALIFIER;
+				break;
+			case 'j':
+				flags |= USB_QUIRK_IGNORE_REMOTE_WAKEUP;
+				break;
+			case 'k':
+				flags |= USB_QUIRK_NO_LPM;
+				break;
+			case 'l':
+				flags |= USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL;
+				break;
+			case 'm':
+				flags |= USB_QUIRK_DISCONNECT_SUSPEND;
+				break;
+			/* Ignore unrecognized flag characters */
+			}
+		}
+
+		quirk_list[i++] = (struct quirk_entry)
+			{ .vid = vid, .pid = pid, .flags = flags };
+	}
+
+	if (i < quirk_count)
+		quirk_count = i;
+
+unlock:
+	mutex_unlock(&quirk_mutex);
+
+	return param_set_copystring(val, kp);
+}
+
+static const struct kernel_param_ops quirks_param_ops = {
+	.set = quirks_param_set,
+	.get = param_get_string,
+};
+
+static struct kparam_string quirks_param_string = {
+	.maxlen = sizeof(quirks_param),
+	.string = quirks_param,
+};
+
+module_param_cb(quirks, &quirks_param_ops, &quirks_param_string, 0644);
+MODULE_PARM_DESC(quirks, "Add/modify USB quirks by specifying quirks=vendorID:productID:quirks");
+
 /* Lists of quirky USB devices, split in device quirks and interface quirks.
  * Device quirks are applied at the very beginning of the enumeration process,
  * right after reading the device descriptor. They can thus only match on device
@@ -320,8 +457,8 @@ static int usb_amd_resume_quirk(struct usb_device *udev)
 	return 0;
 }

-static u32 __usb_detect_quirks(struct usb_device *udev,
-			       const struct usb_device_id *id)
+static u32 usb_detect_static_quirks(struct usb_device *udev,
+				    const struct usb_device_id *id)
 {
 	u32 quirks = 0;

@@ -339,21 +476,43 @@ static u32 __usb_detect_quirks(struct usb_device *udev,
 	return quirks;
 }

+static u32 usb_detect_dynamic_quirks(struct usb_device *udev)
+{
+	u16 vid = le16_to_cpu(udev->descriptor.idVendor);
+	u16 pid = le16_to_cpu(udev->descriptor.idProduct);
+	int i, flags = 0;
+
+	mutex_lock(&quirk_mutex);
+
+	for (i = 0; i < quirk_count; i++) {
+		if (vid == quirk_list[i].vid && pid == quirk_list[i].pid) {
+			flags = quirk_list[i].flags;
+			break;
+		}
+	}
+
+	mutex_unlock(&quirk_mutex);
+
+	return flags;
+}
+
 /*
  * Detect any quirks the device has, and do any housekeeping for it if needed.
  */
 void usb_detect_quirks(struct usb_device *udev)
 {
-	udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
+	udev->quirks = usb_detect_static_quirks(udev, usb_quirk_list);

 	/*
 	 * Pixart-based mice would trigger remote wakeup issue on AMD
 	 * Yangtze chipset, so set them as RESET_RESUME flag.
 	 */
 	if (usb_amd_resume_quirk(udev))
-		udev->quirks |= __usb_detect_quirks(udev,
+		udev->quirks |= usb_detect_static_quirks(udev,
 				usb_amd_resume_quirk_list);

+	udev->quirks ^= usb_detect_dynamic_quirks(udev);
+
 	if (udev->quirks)
 		dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
 			udev->quirks);
@@ -372,7 +531,7 @@ void usb_detect_interface_quirks(struct usb_device *udev)
 {
 	u32 quirks;

-	quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
+	quirks = usb_detect_static_quirks(udev, usb_interface_quirk_list);
 	if (quirks == 0)
 		return;

@@ -380,3 +539,11 @@ void usb_detect_interface_quirks(struct usb_device *udev)
 		quirks);
 	udev->quirks |= quirks;
 }
+
+void usb_release_quirk_list(void)
+{
+	mutex_lock(&quirk_mutex);
+	kfree(quirk_list);
+	quirk_list = NULL;
+	mutex_unlock(&quirk_mutex);
+}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 2f5fbc56a9dd..0adb6345ff2e 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1259,6 +1259,7 @@ static void __exit usb_exit(void)
 	if (usb_disabled())
 		return;

+	usb_release_quirk_list();
 	usb_deregister_device_driver(&usb_generic_driver);
 	usb_major_cleanup();
 	usb_deregister(&usbfs_driver);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 149cc7480971..546a2219454b 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -36,6 +36,7 @@ extern void usb_deauthorize_interface(struct usb_interface *);
 extern void usb_authorize_interface(struct usb_interface *);
 extern void usb_detect_quirks(struct usb_device *udev);
 extern void usb_detect_interface_quirks(struct usb_device *udev);
+extern void usb_release_quirk_list(void);
 extern int usb_remove_device(struct usb_device *udev);

 extern int usb_get_device_descriptor(struct usb_device *dev,
2018-03-12 16:30:40 +01:00
Frank Rowand
54587be496 of: unittest: local return value variable related cleanups
Several more style issues became apparent while creating
"of: unittest: remove unneeded local return value variables".
Correct those issues.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-12 10:27:49 -05:00