Commit graph

766,468 commits

Author SHA1 Message Date
Murali Karicheri
90d4806b8d ARM: dts: Keystone: add ECC error handler support
Add emif node for keystone2 devices, which is used for ECC support.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
[t-kristo@ti.com: made emif enabled by default for all keystone2 devices]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-12 15:14:00 +01:00
Tero Kristo
4cd6847c28 ARM: dts: keystone-k2g: add watchdog support
Add a watchdog node for keystone-k2g, with the corresponding clock and
power domain handles.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-12 15:13:39 +01:00
Arnd Bergmann
189e542b93 AT91 DT for 4.17:
- use 'atmel' as at24 manufacturer
  - device addition and fixes for axentia boards
  - fix sama5d4 pinctrl compatible
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlqja7YACgkQAyWl4gNJ
 NJK7zg//f0Il8OtDnd5bId7cW3BH5GPCj4Rrtsk0nZ8agKY8SYvWXV3ULKtU3Gmm
 sIDpuS3ZdXi7SYo78DIvG+gCaiWCUFdEVGWD+nRSvtQ8aLDfvcENdyMGk3Jo4Mku
 letsZyaiT4/KDPc5sa+KN3qv+SfVLQhMOJd0PHDY4L0Vt52KLYvQ9P/hHF3MUtRT
 /Jtr71i3QjfUEXgoR39mDnOM0OySTbFbxjrCo5i0AuhbAEvEZR/7Lk5zttKZ8kro
 4F/KkFHKxaPoLICsbY1SZ8MUcIzbneusMi/opDosr8QHE7a/H+VaaGXSDx0U3xM/
 cn1HyUQoUAhA8VTCRsdl+Vh9ITLd5GzpZUOjZL3WdwNnS2LwJKDBcmGjvHgjkfiW
 9kP9P+7JwNap2zZHVCZwXpgr7HtRGimt8/h1Tjs7b4lYQGvgh3VdTtG1D6oUyl5n
 e9j9eys7TzCYMywET52bvYtuLZh3TBf0mb+pCewl/AsZ3uOSe0XeCRB8cbY0zEfx
 R1+vzhsfpeYcjZ7+7ieqgcWEP5chhfmTJ0ZqEVZreZKsWiiYL80WZSWsulEkkSGp
 dq8nW/AzaDKlpCg0W2hJAVJTNJQwOLDBCrqYhODzkVwLkvq5s1MRuYDieSGKl0D+
 H9Pf5uwryXV23dMZTHXUt25ZTqGP43lWv7xM4l5tNvSmXdoh1G8=
 =8iJ8
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

Pull "AT91 DT for 4.17" from Alexandre Belloni:

Not much this cycle, mainly changes on the Axentia boards from Peter and
a cleanup from Bartosz:

 - use 'atmel' as at24 manufacturer
 - device addition and fixes for axentia boards
 - fix sama5d4 pinctrl compatible

* tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9263ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91-sama5d2_ptc_ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9g20ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9260ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for sama5d34ek
  ARM: dts: at91: sama5d4: fix pinctrl compatible string
  ARM: dts: at91: tse850: make the sound dai cell count explicit
  ARM: dts: at91: nattis: add lvds-encoder
  ARM: dts: at91: nattis: use up-to-date mtd partitions
  ARM: dts: at91: tse850: use the correct compatible for the eeprom
  ARM: dts: at91: nattis: use the correct compatible for the eeprom
  ARM: dts: at91: sam9rl: Properly assign copyright
2018-03-12 15:05:54 +01:00
Arnd Bergmann
9f07438dd1 mvebu dt64 for 4.17 (part 1)
- convert to the SPDX-License-Identifier
 - add missing clocks (for the registers) on some of the peripherals
 - use the new nand driver
 - add more uart for Armada 7K/8K SoCs
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWqLBBgAKCRALBhiOFHI7
 1dQ0AKCOUzXMHkC5/f0hwgPYpmzKuQGZjACfQA6eVistsl3QfTN0Nph57jRW9IE=
 =KBPW
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt64-4.17-1' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu dt64 for 4.17 (part 1)" from Gregory CLEMENT:

- convert to the SPDX-License-Identifier
- add missing clocks (for the registers) on some of the peripherals
- use the new nand driver
- add more uart for Armada 7K/8K SoCs

* tag 'mvebu-dt64-4.17-1' of git://git.infradead.org/linux-mvebu:
  ARM64: dts: marvell: armada-cp110: Add apb_pclk clock for the uart nodes
  arm64: dts: marvell: use reworked NAND controller driver on Armada 8K
  arm64: dts: marvell: use reworked NAND controller driver on Armada 7K
  ARM64: dts: marvell: armada-cp110: Add registers clock for sata node
  arm64: dts: marvell: armada-8080-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-8040-mcbin: use SPDX-License-Identifier
  arm64: dts: marvell: armada-8040-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-7040-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-3720-espressobin: use SPDX-License-Identifier
  arm64: dts: marvell: armada-3720-db: use SPDX-License-Identifier
  arm64: dts: marvell: use SPDX-License-Identifier for Armada SoCs
  arm64: dts: marvell: mcbin: fix board name typo
  arm64: dts: marvell: mcbin: enable uart headers
  arm64: dts: marvell: add CP110 uart peripherals
  ARM64: dts: marvell: armada-cp110: Add registers clock for I2C nodes
  ARM64: dts: marvell: armada-cp110: Add registers clock for SPI nodes
2018-03-12 15:00:48 +01:00
Arnd Bergmann
a3138e20a2 mvebu dt for 4.17 (part 1)
Most of them are small fixes or cleanup.
 
 Only the change on the clearfog will have a noticeable effect allowing
 to use the i2c at an higher frequency.
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWqK/8QAKCRALBhiOFHI7
 1RRAAKCHV/9lXDrSQJlnmrQg0QkY8wZeggCeO7falJ3+WpWl03xKxcaqUQVNFIc=
 =jSYw
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu dt for 4.17 (part 1)" from Gregory CLEMENT:

Most of them are small fixes or cleanup.

Only the change on the clearfog will have a noticeable effect allowing
to use the i2c at an higher frequency.

* tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada388-clearfog: increase speed of i2c0 to 400kHz
  arm: dts: kirkwood: fix error in #sound-dai-cells size
  ARM: dts: kirkwood: Fix "debounce-interval" property misspelling
  ARM: dts: armada: netgear-rn*: fix rtc node name
2018-03-12 14:59:23 +01:00
Arnd Bergmann
dce8efa057 ARM64: DT: Hisilicon SoC DT updates for 4.17
- Add XGE CPLD control support for hip07 SoC
 - Disable the SMMU on hip06 and hip07 SoCs becuase of
   the hardware limitation
 - Enable HS200 mode for the MMC controller on hi6220 hikey board
 - Remove "cooling-{min|max}-level" this kind unused properties
   for hi6220 SoC
 - Add watchdog node for hi6220 SoC
 - Remove "CPU_NAP" idle state on hikey960 board since it is
   not stable and useless with the updated firmware
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaoqayAAoJEAvIV27ZiWZcCqkP/0vCtll6jMLSNvFFFjdgspXP
 RqzjVCHs0mCdLiMenFFP+uNaeK8h3ctIf/JeO57/zE7lTBvcDklmoQAkVhY3Ctsr
 pq/Nv/neDZjZu0OnWspVXMEo8BSBK/NVxzntKh+PHmfP26McEpOejGz7r4E4tbib
 TNxZFfWqj7Luz7LZJ/uhKfT5HOPz/mVVIf9ean2chyFd7+mKakNCWAj+UYf8a50P
 o/PGbL+UEqgUPy8lmFKAoB5fCI85uDMcL4Pl0DgeOmA7EC68QQ+4mDsdUt0PK3W2
 DcaoGEfbXlsxOsByq0xkuCQxLDcfUFhBAYCKP4UoKyWtmMwTGA5o2H5QQ54iEpoH
 SoBwbLq6LdPyDV5O7SfcPTS6Ii4daKF7R55EqOzqhu544PpEd3hyv4wy45Tcfiky
 VEU0g5Wl/C5ow4scYlllRK9K6DSAvJ71pDb3OEadZYp9ILe2WxHePHLS8l1rZRqo
 i1UdFxyJAUupKEXIMVtBEuirjkDkS55K6LgBBSQQxst6yyEI+NPzB32WQ0UGK+de
 hA5b8qMojB2kzHshSBSXvoIquQAfPYlLU4BbupP0jTCZR6N7Ss+0WDsJ0x8Rt3KY
 quXR8UmiavN9uU8bBA9UYrlPzHeu/EA2A19pU+NOAElQzZCU9tG7rrr5TaS6ZeC3
 6Vh0sPpWM2ettFbbSwq1
 =HIMw
 -----END PGP SIGNATURE-----

Merge tag 'hisi-arm64-dt-for-4.17' of git://github.com/hisilicon/linux-hisi into next/dt

Pull "ARM64: DT: Hisilicon SoC DT updates for 4.17" from Wei Xu:

- Add XGE CPLD control support for hip07 SoC
- Disable the SMMU on hip06 and hip07 SoCs becuase of
  the hardware limitation
- Enable HS200 mode for the MMC controller on hi6220 hikey board
- Remove "cooling-{min|max}-level" this kind unused properties
  for hi6220 SoC
- Add watchdog node for hi6220 SoC
- Remove "CPU_NAP" idle state on hikey960 board since it is
  not stable and useless with the updated firmware

* tag 'hisi-arm64-dt-for-4.17' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Hi3660: Remove 'CPU_NAP' idle state
  arm64: dts: hi6220: enable watchdog
  ARM64: dts: hi6220: Remove "cooling-{min|max}-level" for CPU nodes
  arm64: dts: hikey: Enable HS200 mode on eMMC
  arm64: dts: hisi: Disable hisilicon smmu node on hip06/hip07
  arm64: dts: hisi: add hns-dsaf cpld control for the hip07 SoC
2018-03-12 14:57:49 +01:00
Arnd Bergmann
4bb4aceae9 arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17
- Use SPDX license identifier
 - Add Xilinx ZynqMP boards
   zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA,
   zcu111-revA, zc1751 dc1/dc2/dc3/dc4
 - Add Xilinx Zynq boards
   cc108, zc770 dc1/dc2/dc3/dc4
 - Add Digilent Zybo Z7
 - Minor fixes in current DTSes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlqg4+cACgkQykllyylKDCFqOACfbtI4S2j96N3AsHy3sWFUP7li
 XlUAn2bSg/d/x8gSSt5bO2SlGqWkOQxw
 =iZic
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx into next/dt

Pull "arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17" from Michal Simek:

- Use SPDX license identifier
- Add Xilinx ZynqMP boards
  zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA,
  zcu111-revA, zc1751 dc1/dc2/dc3/dc4
- Add Xilinx Zynq boards
  cc108, zc770 dc1/dc2/dc3/dc4
- Add Digilent Zybo Z7
- Minor fixes in current DTSes

* tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx: (22 commits)
  arm: dts: zynq: Add Digilent Zybo Z7 board
  arm: zynq: Add support for Xilinx zc770 xm013 dc4 board
  arm: zynq: Add support for Xilinx zc770 xm012 dc3 board
  arm: zynq: Add support for Xilinx zc770 xm011 dc2 board
  arm: zynq: Add support for Xilinx zc770 xm010 dc1 board
  arm: zynq: Add Xilinx cc108 board
  arm: zynq: Add missing address node name in microzed board
  arm: dts: zynq: Use SPDX-License-Identifier
  arm: zynq: Use i2c-mux instead of i2cswitch for pca9548
  arm64: zynqmp: Add support for Xilinx zc1751
  arm64: zynqmp: Add support for Xilinx zc12XX boards
  arm64: zynqmp: Add support for Xilinx zcu111-revA
  arm64: zynqmp: Add support for Xilinx zcu106-revA
  arm64: zynqmp: Add support for Xilinx zcu104-revA
  arm64: zynqmp: Add support for Xilinx zcu102
  arm64: zynqmp: Add support for Xilinx zcu100-revC
  dt-bindings: xilinx: Add description for ZynqMP
  arm64: zynqmp: Add 8-bit bus width property for ep108
  arm64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts
  arm64: zynqmp: Add SPDX license identifier
  ...
2018-03-12 14:53:21 +01:00
Sebastian Reichel
75dd56c0cd Merge branch 'fixes' into for-next
Merge for-stable fixes branch into for-next development branch.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-12 14:35:10 +01:00
Gustavo A. R. Silva
fc5a7f0339 power: supply: da9150-fg: remove VLA usage
In preparation to enabling -Wvla, remove VLA usage and replace it
with fixed-length arrays.

DA9150_QIF_LONG_SIZE (4 bytes) is the biggest size of an attribute which can
be accessed [1].

Fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621

[1] https://marc.info/?l=kernel-hardening&m=152059600524753&w=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-12 14:34:52 +01:00
Sebastian Reichel
3c6b4f46b4 ARM: dts: omap3-n900: Add link between battery and charger
This adds information, that the battery is charged by the charger.
The Linux kernel uses this information to refresh battery information
when the power-supply changes.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-12 14:34:51 +01:00
Sebastian Reichel
90ad4cc203 power: supply: bq2415x: add DT referencing support
Add support for using bq2415x together with power_supply_am_i_supplied().

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-12 14:34:51 +01:00
Sebastian Reichel
f72c14ad8c power: supply: bq27xxx: support missing supplier device
power_supply_am_i_supplied() can return negative error
codes. In this case we should assume, that no charger
is connected and the battery should be marked as
DISCHARGING instead of NOT_CHARGING.

Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-12 14:30:09 +01:00
Pierre Bourdon
66ec32fc7c max17042: propagate of_node to power supply device
max17042_get_status uses the core power_supply_am_i_supplied. That
function relies on DT properties to figure out the power supply
topology, and will error out without DT.

Fixes max17042 battery status being reported as "unknown".

Signed-off-by: Pierre Bourdon <delroth@google.com>
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-12 14:29:52 +01:00
Takashi Iwai
40088dc4e1 ALSA: hda - Revert power_save option default value
With the commit 1ba8f9d308 ("ALSA: hda: Add a power_save
blacklist"), we changed the default value of power_save option to -1
for processing the power-save blacklist.
Unfortunately, this seems breaking user-space applications that
actually read the power_save parameter value via sysfs and judge /
adjust the power-saving status.  They see the value -1 as if the
power-save is turned off, although the actual value is taken from
CONFIG_SND_HDA_POWER_SAVE_DEFAULT and it can be a positive.

So, overall, passing -1 there was no good idea.  Let's partially
revert it -- at least for power_save option default value is restored
again to CONFIG_SND_HDA_POWER_SAVE_DEFAULT.  Meanwhile, in this patch,
we keep the blacklist behavior and make is adjustable via the new
option, pm_blacklist.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073
Fixes: 1ba8f9d308 ("ALSA: hda: Add a power_save blacklist")
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-12 14:16:08 +01:00
Marcel Ziswiler
c35b518f9b clk: tegra: Fix pll_u rate configuration
Turns out latest upstream U-Boot does not configure/enable pll_u which
leaves it at some default rate of 500 kHz:

root@apalis-t30:~# cat /sys/kernel/debug/clk/clk_summary | grep pll_u
       pll_u                  3        3        0      500000          0

Of course this won't quite work leading to the following messages:

[    6.559593] usb 2-1: new full-speed USB device number 2 using tegra-
ehci
[   11.759173] usb 2-1: device descriptor read/64, error -110
[   27.119453] usb 2-1: device descriptor read/64, error -110
[   27.389217] usb 2-1: new full-speed USB device number 3 using tegra-
ehci
[   32.559454] usb 2-1: device descriptor read/64, error -110
[   47.929777] usb 2-1: device descriptor read/64, error -110
[   48.049658] usb usb2-port1: attempt power cycle
[   48.759475] usb 2-1: new full-speed USB device number 4 using tegra-
ehci
[   59.349457] usb 2-1: device not accepting address 4, error -110
[   59.509449] usb 2-1: new full-speed USB device number 5 using tegra-
ehci
[   70.069457] usb 2-1: device not accepting address 5, error -110
[   70.079721] usb usb2-port1: unable to enumerate USB device

Fix this by actually allowing the rate also being set from within
the Linux kernel.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-12 13:59:06 +01:00
Dmitry Osipenko
c485ad63ab clk: tegra: Specify VDE clock rate
Currently VDE clock rate is determined by clock config left from
bootloader, let's not rely on it and explicitly specify the clock
rate in the CCF driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-12 13:59:06 +01:00
Dmitry Osipenko
ea141d5819 clk: tegra20: Correct PLL_C_OUT1 setup
PLL_C_OUT_1 can't produce 216 MHz defined in the init_table. Let's
set it to 240 MHz and explicitly specify HCLK rate for consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-12 13:59:05 +01:00
Dmitry Osipenko
2dcabf053c clk: tegra: Mark HCLK, SCLK and EMC as critical
Machine dies if HCLK, SCLK or EMC is disabled. Hence mark these clocks
as critical.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: <stable@vger.kernel.org> # v4.16
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-12 13:58:58 +01:00
Greg Kroah-Hartman
914a020d4a phy: for 4.16-rc
*) Fix a Kbuild failure in qcom-ufs
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJapk/uAAoJEA5ceFyATYLZ2PkP/2h6ukU68gdgzmnADvx8Nvwb
 TXYJG7w5NcCVAf2QrGr9B9QQnWqUIdx+Gq6Md5QV0Wmhqgog6yzAf1Rt2J5AwA4i
 9aR/nWRbAMyB/O+H43Rdmbcv2ME9nPeGvcSKnvNh1TAtMOheeaJex0RQSFMv0wiH
 KpD/NpnN0JD/Dk1/qKHJWUV0R6N0Zjv5EcCshEHyHwrwptZwEXPMj7s0LS+g7YeL
 GihZKSOqrjN9mkvQdXMhN7XVhF73WWtBDUpM/YJuA6xJED7KjBGi7LL2JD5V4uD3
 qYZowz3WKRhDT9dqpWtgOroODcfCW7KkKaYWzfENHBrBscS8TfG37scCo3itB/nx
 Z875MlzVXxxH+0YGV921IOjOjA99u9H1VHRHH9+cJWxQr8MlXHC/TiDUQD5eLWyu
 FGQXLw6bhKOyoHf7pbPrTrZIXcwFZ6UVR+7XMN4h0IMADC/ZXritnYjdFEfKayM9
 ja52G1d5iNp5f8djODtCNgVANMFvkoBw+QXceRSx3BiBn2S9kT9iQZDNgODYsayR
 yHvLwG6D4Bgi5tjLXkN9c8F110MAjHx9zd2oodA6gE0enJke36h1xl5sgkD6ExsN
 Q0dnUhyp+3jlRwQwCWVAk04VO/2S3EEI6Gveq+hYR/zQUuocwxREUUm7Iqhx3F/u
 9O+4pviVjpOzt2wwRR79
 =0H1k
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-4.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus

phy: for 4.16-rc

 *) Fix a Kbuild failure in qcom-ufs

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-12 13:13:42 +01:00
Corey Minyard
4876234acc ipmi: Remove ACPI SPMI probing from the system interface driver
The IPMI spec states:

  The purpose of the SPMI Table is to provide a mechanism that can
  be used by the OSPM (an ACPI term for “OS Operating System-directed
  configuration and Power Management” essentially meaning an ACPI-aware
  OS or OS loader) very early in the boot process, e.g., before the
  ability to execute ACPI control methods in the OS is available.

When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI.  It could cause some confusion
during the probing process.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-03-12 07:03:06 -05:00
ShuFan Lee
7d287a5d5f staging: typec: modify parameter of tcpci_irq
The parameter, dev_id, of tcpci_irq should be tcpci_chip.
Remove definition of TCPC_CC_STATUS_DRPRST in tcpci.h.

Fixes: 8f9439022648("staging: typec: handle vendor defined part and modify drp toggling flow")
Signed-off-by: ShuFan Lee <shufan_lee@richtek.com>
Reviewed-by: Li Jun <jun.li@nxp.com>
Tested-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-12 13:02:48 +01:00
Corey Minyard
4866b1dce0 ipmi: Remove ACPI SPMI probing from the SSIF (I2C) driver
The IPMI spec states:

  The purpose of the SPMI Table is to provide a mechanism that can
  be used by the OSPM (an ACPI term for “OS Operating System-directed
  configuration and Power Management” essentially meaning an ACPI-aware
  OS or OS loader) very early in the boot process, e.g., before the
  ability to execute ACPI control methods in the OS is available.

When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI.  It could cause some confusion
during the probing process.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Jiandi An <anjiandi@codeaurora.org>
2018-03-12 07:02:47 -05:00
Andy Shevchenko
0242874263 x86/platform/intel-mid: Add special handling for ACPI HW reduced platforms
When switching to ACPI HW reduced platforms we still want to initialize timers.
Override x86_init.acpi.reduced_hw_init to achieve that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:32:57 +01:00
Andy Shevchenko
81b53e5ff2 ACPI, x86/boot: Introduce the ->reduced_hw_early_init() ACPI callback
Some ACPI hardware reduced platforms need to initialize certain devices
defined by the ACPI hardware specification even though in principle
those devices should not be present in an ACPI hardware reduced platform.

To allow that to happen, make it possible to override the generic
x86_init callbacks and provide a custom legacy_pic value, add a new
->reduced_hw_early_init() callback to struct x86_init_acpi and make
acpi_reduced_hw_init() use it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:32:57 +01:00
Andy Shevchenko
50beba07a0 ACPI, x86/boot: Split out acpi_generic_reduce_hw_init() and export
This is a preparation patch to allow override the hardware reduced
initialization on ACPI enabled platforms.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:32:57 +01:00
Dmitry Vyukov
ac605bee0b locking/atomic, asm-generic, x86: Add comments for atomic instrumentation
The comments are factored out from the code changes to make them
easier to read. Add them separately to explain some non-obvious
aspects.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/cc595efc644bb905407012d82d3eb8bac3368e7a.1517246437.git.dvyukov@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:15:35 +01:00
Dmitry Vyukov
a35353bb9e locking/atomic, asm-generic: Add KASAN instrumentation to atomic operations
KASAN uses compiler instrumentation to intercept all memory accesses. But it does
not see memory accesses done in assembly code. One notable user of assembly code
is atomic operations. Frequently, for example, an atomic reference decrement is
the last access to an object and a good candidate for a racy use-after-free.

Add manual KASAN checks to atomic operations.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>,
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>,
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/2fa6e7f0210fd20fe404e5b67e6e9213af2b69a1.1517246437.git.dvyukov@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:15:35 +01:00
Dmitry Vyukov
8bf705d130 locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h
Add arch_ prefix to all atomic operations and include
<asm-generic/atomic-instrumented.h>. This will allow
to add KASAN instrumentation to all atomic ops.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/54f0eb64260b84199e538652e079a89b5423ad41.1517246437.git.dvyukov@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:15:35 +01:00
Dmitry Vyukov
b06ed71a62 locking/atomic, asm-generic: Add asm-generic/atomic-instrumented.h
The new header allows to wrap per-arch atomic operations
and add common functionality to all of them.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/31040b4e126bce801d2cc85a9c444b4332a88aa8.1517246437.git.dvyukov@google.com
Link: http://lkml.kernel.org/r/4ffbfa72c29134ac87b1f69da1506a5720590b5d.1497690003.git.dvyukov@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:15:27 +01:00
Ingo Molnar
9884afa2fd Linux 4.16-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlqlyPEeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNa0H/RIa/StQuYu/SBwa
 JRqQFmkIsx+gG+FyamJrqGzRfyjounES8PbfyaN3cCrzYgeRwMp1U/bZW6/l5tkb
 OjTtrCJ6CJaa21fC/7aqn3rhejHciKyk83EinMu5WjDpsQcaF2xKr3SaPa62Ja24
 fhawKq3CnUa+OUuAbicVX8yn4viUB6x8FjSN/IWfp3Cs4IBR7SGxxD7A4MET9FbQ
 5OOu0al8ly9QeCggTtJyk+cApeLfexEBTbUur9gm7GcH9jhUtJSyZCZsDJx6M2yb
 CwdgF4fyk58c1fuHvTFb0AdUns55ba3nicybRHHMVbDpZIG9v4/M1yJETHHf5cD7
 t3rFjrY=
 =+Ldf
 -----END PGP SIGNATURE-----

Merge tag 'v4.16-rc5' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:14:57 +01:00
Kirill A. Shutemov
24c517856a x86/pconfig: Provide defines and helper to run MKTME_KEY_PROG leaf
MKTME_KEY_PROG allows to manipulate MKTME keys in the CPU.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-6-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:10:54 +01:00
Kirill A. Shutemov
be7825c19b x86/pconfig: Detect PCONFIG targets
Intel PCONFIG targets are enumerated via new CPUID leaf 0x1b. This patch
detects all supported targets of PCONFIG and implements helper to check
if the target is supported.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:10:54 +01:00
Kirill A. Shutemov
cb06d8e3d0 x86/tme: Detect if TME and MKTME is activated by BIOS
IA32_TME_ACTIVATE MSR (0x982) can be used to check if BIOS has enabled
TME and MKTME. It includes which encryption policy/algorithm is selected
for TME or available for MKTME. For MKTME, the MSR also enumerates how
many KeyIDs are available.

We would need to exclude KeyID bits from physical address bits.
detect_tme() would adjust cpuinfo_x86::x86_phys_bits accordingly.

We have to do this even if we are not going to use KeyID bits
ourself. VM guests still have to know that these bits are not usable
for physical address.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:10:54 +01:00
Ingo Molnar
3c76db70eb Merge branch 'x86/pti' into x86/mm, to pick up dependencies
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:10:03 +01:00
Kirill A. Shutemov
7958b2246f x86/cpufeatures: Add Intel PCONFIG cpufeature
CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:09:53 +01:00
Kirill A. Shutemov
1da961d72a x86/cpufeatures: Add Intel Total Memory Encryption cpufeature
CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory
Encryption.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:09:53 +01:00
Sean Wang
0629a01920 arm: dts: mt7623: fix USB initialization fails on bananapi-r2
Fix that USB initialization fails as below runtime log is present during
booting on bananapi-r2 board by adding missing regulators the USB device
requires. Current regulators USB device uses are being updated with the
correct ones to reflect real configurations which are all from fixed
regulators rather than MT6323 one's output.

xhci-mtk 1a1c0000.usb: 1a1c0000.usb supply vbus not found, using dummy regulator
xhci-mtk 1a240000.usb: 1a240000.usb supply vbus not found, using dummy regulator

Cc: stable@vger.kernel.org
Fixes: f4ff257cd1 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
[mb: update kernel log in commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-12 11:52:26 +01:00
Kirill A. Shutemov
194a9749c7 x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G
This patch addresses a shortcoming in current boot process on machines
that supports 5-level paging.

If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling
paging. It works fine if kernel itself is loaded below 4G.

But if the bootloader put the kernel above 4G (not sure if anybody does
this), we would lose control as soon as paging is disabled, because the
code becomes unreachable to the CPU.

This patch implements a trampoline in lower memory to handle this
situation.

We only need the memory for a very short time, until the main kernel
image sets up own page tables.

We go through the trampoline even if we don't have to: if we're already
in 5-level paging mode or if we don't need to switch to it. This way the
trampoline gets tested on every boot.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 11:49:25 +01:00
Kirill A. Shutemov
0a1756bd28 x86/boot/compressed/64: Use page table in trampoline memory
If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling
paging. It works fine if kernel itself is loaded below 4G.

But if the bootloader put the kernel above 4G (i.e. in kexec() case),
we would lose control as soon as paging is disabled, because the code
becomes unreachable to the CPU.

To handle the situation, we need a trampoline in lower memory that would
take care of switching on 5-level paging.

Apart from the trampoline code itself we also need a place to store
top-level page table in lower memory as we don't have a way to load
64-bit values into CR3 in 32-bit mode. We only really need 8 bytes there
as we only use the very first entry of the page table. But we allocate a
whole page anyway.

This patch switches 32-bit code to use page table in trampoline memory.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 11:49:25 +01:00
Kirill A. Shutemov
f7ff53e470 x86/boot/compressed/64: Use stack from trampoline memory
As the first step on using trampoline memory, let's make 32-bit code use
stack there.

Separate stack is required to return back from trampoline and we cannot
user stack from 64-bit mode as it may be above 4G.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 11:49:24 +01:00
Kirill A. Shutemov
7beebaccd5 x86/boot/compressed/64: Make sure we have a 32-bit code segment
When kernel starts in 64-bit mode we inherit the GDT from the bootloader.
It may cause a problem if the GDT doesn't have a 32-bit code segment
where we expect it to be.

Load our own GDT with known segments.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 11:49:24 +01:00
Sylwester Nawrocki
948e068454 clk: samsung: exynos5420: Add more entries to EPLL rate table
Adding these EPLL output frequency entries allows to support all required
audio sample rates on the CODEC and the HDMI interface on Peach-Pit
Chromebook.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2018-03-12 11:23:27 +01:00
Sylwester Nawrocki
06255a9279 clk: samsung: exynos5420: Add CLK_SET_RATE_PARENT flag to mout_mau_epll_clk
This allows changing the EPLL output frequency through the audio subsystem
clock tree leaf clocks. This change is needed to support audio on the HDMI
interface on Peach-Pi(t) Chromebook.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2018-03-12 11:20:30 +01:00
Jeffy Chen
03151b8989 ARM: rockchip: Set name of pmu regmap_config in smp code
We are now allowing to register debugfs without a valid device, and not
having a valid name will end up using "dummy*" to create debugfs dir.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-12 11:09:36 +01:00
Shunqian Zheng
3f7f3b0fb4 arm64: dts: rockchip: assign clock rate for ACLK_VIO on rk3399
The ACLK_VIO is a parent clock used by a several children,
its suggested clock rate is 400MHz. Right now it gets 400MHz
because it sources from CPLL(800M) and divides by 2 after reset.
It's good not to rely on default values like this, so let's
explicitly set it.
NOTE: it's expected that at least one board may override cru node and
set the CPLL to 1.6 GHz. On that board it will be very important to be
explicit about aclk-vio being 400 MHz.

Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-12 11:08:30 +01:00
Sai Praneeth
03781e4089 x86/efi: Use efi_switch_mm() rather than manually twiddling with %cr3
Use helper function efi_switch_mm() to switch to/from efi_mm when
invoking any UEFI runtime services.

Likewise, we need to switch back to previous mm (mm context stolen
by efi_mm) after the above calls return successfully. We can use
efi_switch_mm() helper function only with x86_64 kernel and
"efi=old_map" disabled because, x86_32 and efi=old_map do not use
efi_pgd, rather they use swapper_pg_dir.

Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
[ardb: add #include of sched/task.h for task_lock/_unlock]
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Lee, Chun-Yi <jlee@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 11:05:05 +01:00
Sai Praneeth
3ede3417f8 x86/efi: Replace efi_pgd with efi_mm.pgd
Since the previous patch added support for efi_mm, let's handle efi_pgd
through efi_mm and remove global variable efi_pgd.

Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Lee, Chun-Yi <jlee@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 11:05:05 +01:00
Andrea Parri
fbfcd01991 locking/xchg/alpha: Remove superfluous memory barriers from the _local() variants
The following two commits:

  79d442461d ("locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB")
  472e8c55cf ("locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs")

... ended up adding unnecessary barriers to the _local() variants on Alpha,
which the previous code took care to avoid.

Fix them by adding the smp_mb() into the cmpxchg() macro rather than into the
____cmpxchg() variants.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-alpha@vger.kernel.org
Fixes: 472e8c55cf ("locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs")
Fixes: 79d442461d ("locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB")
Link: http://lkml.kernel.org/r/1519704058-13430-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 10:59:03 +01:00
Peter Zijlstra
9e49e2447c sched/core: Remove TASK_ALL
It's unused:

  $ git grep "\<TASK_ALL\>" | wc -l
  1

... and it is also dangerous, kill the bugger.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180227160510.10829-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 10:51:47 +01:00
Chen-Yu Tsai
d7119224bf phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUS
The AXP223 PMIC, like the AXP221, does not generate VBUS change
interrupts when N_VBUSEN is used to drive VBUS for the OTG port
on the board.

This was not noticed until recently, as most A23/A33 boards use
a GPIO pin that does not support interrupts for OTG ID detection.
This forces the driver to use polling. However the A33-OlinuXino
uses a pin that does support interrupts, so the driver uses them.
However the VBUS interrupt never fires, and the driver never gets
to update the VBUS status. This results in musb timing out waiting
for VBUS to rise.

This was worked around for the AXP221 by resorting to polling
changes in commit 91d96f06a7 ("phy-sun4i-usb: Add workaround for
missing Vbus det interrupts on A31"). This patch adds the A23 and
A33 to the list of SoCs that need the workaround.

Fixes: fc1f45ed30 ("phy-sun4i-usb: Add support for the usb-phys on the
		      sun8i-a33 SoC")
Fixes: 123dfdbcfa ("phy-sun4i-usb: Add support for the usb-phys on the
		      sun8i-a23 SoC")
Cc: <stable@vger.kernel.org> # 4.3.x: 68dbc2ce77 phy-sun4i-usb:
		Use of_match_node to get model specific config data
Cc: <stable@vger.kernel.org> # 4.3.x: 5cf700ac9d phy: phy-sun4i-usb:
		Fix optional gpios failing probe
Cc: <stable@vger.kernel.org> # 4.3.x: 04e59a0211 phy-sun4i-usb:
		Fix irq free conditions to match request conditions
Cc: <stable@vger.kernel.org> # 4.3.x: 91d96f06a7 phy-sun4i-usb:
		Add workaround for missing Vbus det interrupts on A31
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-12 15:12:21 +05:30