Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-1-krzysztof.kozlowski@linaro.org
Use the correct compatible so that the driver can probe properly.
Fixes: a6dd1206e4 ("arm64: dts: qcom: sm8450: add display hardware devices")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123200552.553181-1-konrad.dybcio@linaro.org
IPQ8074 has efuses like other Qualcomm SoC-s that are required for
determining various HW quirks which will be required later for CPR etc,
so lets add the QFPROM node for start.
Individidual fuses will be added as they are required.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123101631.475712-2-robimarko@gmail.com
The USB-DP PHY resets have been switched.
Fixes: 7f7e5c1b03 ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123101607.2413-1-johan+linaro@kernel.org
The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather
than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch
msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1.
Fixes: 2b8c9c77c2 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1")
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-7-dmitry.baryshkov@linaro.org
The sound card does not expose DAIs and does not use custom qcom
properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and
'qcom,msm-mbhc-hphl-swh':
sc7280-idp.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119122205.73372-2-krzysztof.kozlowski@linaro.org
The sound card does not expose DAIs and does not use custom qcom
properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and
'qcom,msm-mbhc-hphl-swh':
sc7280-herobrine-crd.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119122205.73372-1-krzysztof.kozlowski@linaro.org
SM6115's SMMU uses 36bit VAs, which is a good indicator that we
should increase (dma-)ranges - and by extension #address- and
#size-cells to prevent things from getting lost in translation
(both literally and figuratively). Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119101644.10711-2-konrad.dybcio@linaro.org
Add a mdss_ prefix to mdss nodes to keep them all near each other
when referencing them by label in device DTs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119101644.10711-1-konrad.dybcio@linaro.org
This commit adds support for the ufi-001C and uf896 WiFi/LTE dongle made by
Tong Heng Wei Chuang based on MSM8916.
uf896 is another variant for the usb stick. The board design
differs by using different gpios for the keys and leds.
Note: The original firmware does not support 64-bit OS. It is necessary
to flash 64-bit TZ firmware to boot arm64.
Currently supported:
- All CPU cores
- Buttons
- LEDs
- Modem
- SDHC
- USB Device Mode
- UART
Co-developed-by: Jaime Breva <jbreva@nayarsystems.com>
Signed-off-by: Jaime Breva <jbreva@nayarsystems.com>
Co-developed-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the ADSP GPR (Generic Packet Router) and LPASS LPI (Low Power Audio
SubSystem Low Power Island) pin controller nodes used as part of audio
subsystem on SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Shortened stream mask, per Konrad's request]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206150744.513967-1-krzysztof.kozlowski@linaro.org
Some of the qualcomm qcard based herobrine devices can come with
a Pro variant of the chipset on the qcard. Such Pro qcards have
the smps9 from pm8350c ganged up with smps7 and smps8, so add a
.dtsi for pro skus that deletes the smps9 node and include it from
the new dts for the CRD Pro
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216112918.1243-2-quic_rjendra@quicinc.com
Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
to boot to shell with console on these SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112210722.6234-2-quic_molvera@quicinc.com
Somehow DSI1 was not hooked up to MDP resulting in it not working.
Fix it.
Fixes: d4a4410583 ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-8-konrad.dybcio@linaro.org
Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
be organized near each other while retaining the alphabetical order
in device DTs when referencing by label.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-7-konrad.dybcio@linaro.org
As downstream indicates, DSI PLL is actually 0x27c and not 0x260-
wide. Fix that to reserve the correct registers.
Fixes: d4a4410583 ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-6-konrad.dybcio@linaro.org
This was omitted but is necessary for DSI1 to function. Fix it.
Fixes: d4a4410583 ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-4-konrad.dybcio@linaro.org
Panels/DRM bridges definitely don't need 64bits of address space and
are usually not 32-bit wide. Set address-cells to 1 and size-cells to
0.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-2-konrad.dybcio@linaro.org
Current PCIe QMP PHY output name were changed in ("arm64: dts: qcom: Fix
IPQ8074 PCIe PHY nodes") however it did not account for the fact that GCC
driver is relying on the old names to match them as they are being used as
the parent for the gcc_pcie0_pipe_clk and gcc_pcie1_pipe_clk.
This broke parenting as GCC could not find the parent clock, so fix it by
changing to the names that driver is expecting.
Fixes: 942bcd33ed ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-9-robimarko@gmail.com
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Finish the PCIe fixup by using the correct compatible, adding missing ATU
register space, declaring max-link-speed, use correct ranges, add missing
clocks and resets.
Fixes: 33057e1672 ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-8-robimarko@gmail.com
Add the generic 'max-link-speed' property to describe the Gen2 PCIe link
generation limit.
This allows the generic DWC code to configure the link speed correctly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-4-robimarko@gmail.com
Current ranges property set in Gen2 PCIe node is incorrect, replace it
with the downstream 5.4 QCA kernel value.
Fixes: 33057e1672 ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-3-robimarko@gmail.com
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Now that we have Gen3 QMP PHY support, we can start fixing the PCIe support
by fixing the Gen3 QMP PHY node first.
Change the compatible to the Gen3 QMP PHY, correct the register space start
and size, add the missing misc PCS register space.
Fixes: 33057e1672 ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-2-robimarko@gmail.com
Serdes register space sizes are incorrect, update them to match the
actual sizes from downstream QCA 5.4 kernel.
Fixes: 942bcd33ed ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-1-robimarko@gmail.com
Geni I2C Controller node does not allow a "label" property and Linux
driver does not parse it:
sdm845-db845c.dtb: i2c@a8c000: Unevaluated properties are not allowed ('label' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113145231.79280-1-krzysztof.kozlowski@linaro.org
In some cases the driver might need using GPLL0 to drive CPU clocks.
Bring it in through the sys_apcs_aux clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113120544.59320-15-dmitry.baryshkov@linaro.org
Add device tree bindings for global clock controller on QDU1000 and
QRU1000 SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112204446.30236-2-quic_molvera@quicinc.com
The devicetree should specify both MSI implementations and the OS/driver
should choose the one based on the platform requirements. Currently, Linux
DWC driver will choose GIC-ITS over the internal MSI controller.
Fixes: a11bbf6adef4 ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111123004.21048-2-manivannan.sadhasivam@linaro.org
Neither qcom,sm8250-lpass-tx-macro bindings nor the driver use
"clock-frequency" and address/size cells properties.
sm8250-mtp.dtb: txmacro@3220000: Unevaluated properties are not allowed ('clock-frequency', '#address-cells', '#size-cells' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109112221.102473-4-krzysztof.kozlowski@linaro.org
Neither qcom,sm8250-lpass-wsa-macro bindings nor the driver use
"clock-frequency" property.
sm8250-hdk.dtb: codec@3240000: Unevaluated properties are not allowed ('clock-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109112221.102473-3-krzysztof.kozlowski@linaro.org
