[ Upstream commit fef0e649f8 ]
The logicvc_drm_config_parse() function calls of_get_child_by_name() to
find the "layers" node but fails to release the reference, leading to a
device node reference leak.
Fix this by using the __free(device_node) cleanup attribute to automatic
release the reference when the variable goes out of scope.
Fixes: efeeaefe9b ("drm: Add support for the LogiCVC display controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260130-logicvc_drm-v1-1-04366463750c@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd3634312a ]
debugobjects uses __GFP_HIGH for allocations as it might be invoked
within locked regions. That worked perfectly fine until v6.18. It still
works correctly when deferred page initialization is disabled and works
by chance when no page allocation is required before deferred page
initialization has completed.
Since v6.18 allocations w/o a reclaim flag cause new_slab() to end up in
alloc_frozen_pages_nolock_noprof(), which returns early when deferred
page initialization has not yet completed. As the deferred page
initialization takes quite a while the debugobject pool is depleted and
debugobjects are disabled.
This can be worked around when PREEMPT_COUNT is enabled as that allows
debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when the context
is preemtible. When PREEMPT_COUNT is disabled the context is unknown and
the reclaim bit can't be set because the caller might hold locks which
might deadlock in the allocator.
In preemptible context the reclaim bit is harmless and not a performance
issue as that's usually invoked from slow path initialization context.
That makes debugobjects depend on PREEMPT_COUNT || !DEFERRED_STRUCT_PAGE_INIT.
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patch.msgid.link/87pl6gznti.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5023ca80f9 ]
Before the referenced fixes these functions used a lookup function that
returned a pointer. This was changed to another lookup function that
returned an error code with the pointer becoming an out parameter.
The error path when the lookup failed was not changed to reflect this
change and the code continued to return the PTR_ERR of the now
uninitialized pointer. This could cause the vmw_translate_ptr functions
to return success when they actually failed causing further uninitialized
and OOB accesses.
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Fixes: a309c7194e ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260113175357.129285-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 211ecfaaef ]
The kref_put() call uses (void *)kvfree as the release callback, which
is incorrect. kref_put() expects a function with signature
void (*release)(struct kref *), but kvfree has signature
void (*)(const void *). Calling through an incompatible function pointer
is undefined behavior.
The code only worked by accident because ref_count is the first member
of vmw_bo_dirty, making the kref pointer equal to the struct pointer.
Fix this by adding a proper release callback that uses container_of()
to retrieve the containing structure before freeing.
Fixes: c1962742ff ("drm/vmwgfx: Use kref in vmw_bo_dirty")
Signed-off-by: Brad Spengler <brad.spengler@opensrcsec.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260107171236.3573118-1-zack.rusin@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 77de62ad3d upstream.
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer.
Closes: https://lore.kernel.org/oe-kbuild-all/202602020208.m7KIjdzW-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Haocheng Yu <yuhaocheng035@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260202162057.7237-1-yuhaocheng035@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efdc66fe12 ]
When GPU memory mappings are updated, the driver returns a fence so
userspace knows when the update is finished.
The previous refactor could pick the wrong fence or rely on checks that
are not safe for GPU mappings that stay valid even when memory is
missing. In some cases this could return an invalid fence or cause fence
reference counting problems.
Fix this by (v5,v6, per Christian):
- Starting from the VM’s existing last update fence, so a valid and
meaningful fence is always returned even when no new work is required.
- Selecting the VM-level fence only for always-valid / PRT mappings using
the required combined bo_va + bo guard.
- Using the per-BO page table update fence for normal MAP and REPLACE
operations.
- For UNMAP and CLEAR, returning the fence provided by
amdgpu_vm_clear_freed(), which may remain unchanged when nothing needs
clearing.
- Keeping fence reference counting balanced.
v7: Drop the extra bo_va/bo NULL guard since
amdgpu_vm_is_bo_always_valid() handles NULL BOs correctly (including
PRT). (Christian)
This makes VM timeline fences correct and prevents crashes caused by
incorrect fence handling.
Fixes: bd8150a1b3 ("drm/amdgpu: Refactor amdgpu_gem_va_ioctl for Handling Last Fence Update and Timeline Management v4")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c198c272f ]
A recent commit fixed a resource leak on early registration failures but
for some reason left out the first error path which still leaks the
resources associated with the interface.
Fix up also the first error path so that the interface is always
released on errors.
Fixes: 1f4c9d8a10 ("most: core: fix resource leak in most_register_interface error paths")
Fixes: 723de0f917 ("staging: most: remove device from interface structure")
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Navaneeth K <knavaneeth786@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260116162950.21578-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5cb94ba5f ]
Ben reports that when running with CONFIG_DEBUG_PREEMPT, using
__arch_counter_get_cntvct_stable() results in well deserves warnings,
as we access a per-CPU variable without preemption disabled.
Fix the issue by disabling preemption on reading the counter. We can
probably do a lot better by not disabling preemption on systems that
do not require horrible workarounds to return a valid counter value,
but this plugs the issue for the time being.
Fixes: 29cc0f3aa7 ("arm64: Force the use of CNTVCT_EL0 in __delay()")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/aZw3EGs4rbQvbAzV@e134344.arm.com
Tested-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e764dd439d ]
Chris Mason noticed that there is a copy-paste error in a recent change
to xrep_dir_teardown that nulls out pointers after freeing the
resources.
Fixes: ba408d299a ("xfs: only call xf{array,blob}_destroy if we have a valid pointer")
Link: https://lore.kernel.org/linux-xfs/20260205194211.2307232-1-clm@meta.com/
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 524696a19e ]
Commit 469c1c9eb6 ("kernel-doc: Issue warnings that were silently
discarded") started emitting warnings for cases that were previously
silently discarded. One such case is in intel_wakeref.h:
Warning: drivers/gpu/drm/i915/intel_wakeref.h:156 expecting prototype
for __intel_wakeref_put(). Prototype was for INTEL_WAKEREF_PUT_ASYNC()
instead
Arguably kernel-doc should be able to handle this, as it's valid C, but
having the flags defined between the function declarator and the body is
just asking for trouble. Move the INTEL_WAKEREF_PUT_* macros away from
there, making kernel-doc's life easier.
While at it, reduce the unnecessary abstraction levels by removing the
enum, and append _MASK to INTEL_WAKEREF_PUT_DELAY for clarity.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251215120908.3515578-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 0089ce1c05 which is
upstream commit 6cfed39c2c.
This commit is causing a suspend regression on systems such as the Asus
Zephyrus G14 (GA402RJ) with Ryzen 7 6700H: when suspending, the display
turns off but the device fails to fully power down. This is not seen
with v7.0-rc1 which indicates that there are changes missing. Therefore,
revert this change.
Link: https://lore.kernel.org/all/lA7Dz_m7_nCF8KkRyEOcSCLg799Mm9_DN2r9hx7ISjw32OoKiB1r_YjGHIFX8vgqxpOkVJ8d_yHb-VsGAvIWC942D4-zdWxAIP4_k6ZIQi8=@protonmail.com/
Fixes: 0089ce1c05 ("ACPI: processor: Update cpuidle driver check in __acpi_processor_start()")
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0585c53b21 ]
When building with clang older than 17 targeting architectures that use
asm goto for their get_user() and put_user(), such as arm64, after
commit f3d233daf0 ("ALSA: pcm: Relax __free() variable declarations"),
there are bogus errors around skipping over a variable declared with the
cleanup attribute:
sound/core/pcm_native.c:3308:6: error: cannot jump from this asm goto statement to one of its possible targets
if (put_user(result, &_xfern->result))
^
...
arch/arm64/include/asm/uaccess.h:298:2: note: expanded from macro '__put_mem_asm'
asm goto(
^
sound/core/pcm_native.c:3295:6: note: possible target of asm goto statement
if (put_user(0, &_xfern->result))
^
...
sound/core/pcm_native.c:3300:8: note: jump exits scope of variable with __attribute__((cleanup))
void *bufs __free(kfree) =
^
clang-17 fixed a bug in clang's jump scope checker [1] where all labels
in a function were checked as valid targets for all asm goto instances
in a function, regardless of whether they were actual targets in a
paricular asm goto's provided list of labels.
To workaround this, revert the change done to
snd_pcm_xfern_frames_ioctl() by commit f3d233daf0 ("ALSA: pcm: Relax
__free() variable declarations") to avoid a variable declared with
cleanup from existing between multiple uses of asm goto. There are no
other uses of cleanup in this function so there should be low risk from
moving this variable back to the top of the function.
Link: https://github.com/ClangBuiltLinux/linux/issues/1886 [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512190802.i4Jzbcsl-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260106-pcm_native-revert-var-move-free-for-old-clang-v1-1-06a03693423d@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a4b50585d ]
The buffer used for "qp%d" was only 4 bytes, which truncates names like
"qp10" to "qp1" and causes multiple queues to share the same directory.
Enlarge the buffer and use sizeof() to avoid truncation.
Fixes: fce8a7bb5b ("PCI-Express Non-Transparent Bridge Support")
Cc: <stable@vger.kernel.org> # v3.9+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97b281d7ed ]
impl_list_item_mod.rs calls container_of! without unsafe blocks at a
couple of places. Since container_of! is unsafe, the blocks are strictly
necessary.
The problem was so far not visible because the "unsafe-op-in-unsafe-fn"
check is a lint rather than a hard compiler error, and Rust suppresses
lints triggered inside of a macro from another crate.
Thus, the error becomes only visible once someone from within the kernel
crate tries to use linked lists:
error[E0133]: call to unsafe function `core::ptr::mut_ptr::<impl *mut T>::byte_sub`
is unsafe and requires unsafe block
--> rust/kernel/lib.rs:252:29
|
252 | let container_ptr = field_ptr.byte_sub(offset).cast::<$Container>();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^ call to unsafe function
|
::: rust/kernel/drm/jq.rs:98:1
|
98 | / impl_list_item! {
99 | | impl ListItem<0> for BasicItem { using ListLinks { self.links }; }
100 | | }
| |_- in this macro invocation
|
note: an unsafe function restricts its caller, but its body is safe by default
--> rust/kernel/list/impl_list_item_mod.rs:216:13
|
216 | unsafe fn view_value(me: *mut $crate::list::ListLinks<$num>) -> *const Self {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
::: rust/kernel/drm/jq.rs:98:1
|
98 | / impl_list_item! {
99 | | impl ListItem<0> for BasicItem { using ListLinks { self.links }; }
100 | | }
| |_- in this macro invocation
= note: requested on the command line with `-D unsafe-op-in-unsafe-fn`
= note: this error originates in the macro `$crate::container_of` which comes
from the expansion of the macro `impl_list_item`
Therefore, add unsafe blocks to container_of! calls to fix the issue.
[ As discussed, let's fix the build for those that want to use the
macro within the `kernel` crate now and we can discuss the proper
safety comments afterwards. Thus I removed the ones from the patch.
However, we cannot just avoid the comments with `CLIPPY=1`, so I
provided placeholders for now, like we did in the past. They were
also needed for an `unsafe impl`.
While I am not happy about it, it isn't worse than the current
status (the comments were meant to be there), and at least this
shows what is missing -- our pre-existing "good first issue" [1]
may motivate new contributors to complete them properly.
Finally, I moved one of the existing safety comments one line down
so that Clippy could locate it.
Link: https://github.com/Rust-for-Linux/linux/issues/351 [1]
- Miguel ]
Cc: stable@vger.kernel.org
Fixes: c77f85b347 ("rust: list: remove OFFSET constants")
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260216131613.45344-3-phasta@kernel.org
[ Fixed formatting. Reworded to fix the lint suppression
explanation. Indent build error. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9678e53179 ]
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0a0da1f90 ]
The event_hist_open() and event_hist_poll() functions currently retrieve
a trace_event_file pointer from a file struct by invoking
event_file_data(), which simply returns file->f_inode->i_private. The
functions then check if the pointer is NULL to determine whether the event
is still valid. This approach is flawed because i_private is assigned when
an eventfs inode is allocated and remains set throughout its lifetime.
Instead, the code should call event_file_file(), which checks for
EVENT_FILE_FL_FREED. Using the incorrect access function may result in the
code potentially opening a hist file for an event that is being removed or
becoming stuck while polling on this file.
Correct the access method to event_file_file() in both functions.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-2-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4ff9f646a ]
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912b0ee248 ]
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177123421541.142205.9414352170164678966.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f154777940 ]
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260213100130.2013839-1-d.dulov@aladdin.ru
Closes: https://lore.kernel.org/r/202406130130.JtTGRf7W-lkp@intel.com/
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 571dcbeb8e ]
Since commit 9c328f5474 ("net: nfc: nci: Add parameter validation for
packet data") communication with nci nfc chips is not working any more.
The mentioned commit tries to fix access of uninitialized data, but
failed to understand that in some cases the data packet is of variable
length and can therefore not be compared to the maximum packet length
given by the sizeof(struct).
Fixes: 9c328f5474 ("net: nfc: nci: Add parameter validation for packet data")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260218083000.301354-1-michael.thalmeier@hale.at
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 096bb75e13 ]
On Intel MacBookPros with switchable graphics, when the iGPU
is enabled, the address of VRAM gets put at 0 in the dGPU's
virtual address space. This is non-standard and seems to cause
issues with the cursor if it ends up at 0. We have the framework
to reserve memory at 0 in the address space, so enable it here if
the vram start address is 0.
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4302
Cc: stable@vger.kernel.org
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a65009e7 ]
[Why]
Fix fastboot broken in driver.
This is caused by an open source backport change 7495962c.
from the comment, the intended check is to disable fastboot
for pre-DCN10. but the logic check is reversed, and causes
fastboot to be disabled on all DCN10 and after.
fastboot is for driver trying to pick up bios used hw setting
and bypass reprogramming the hw if dc_validate_boot_timing()
condition meets.
Fixes: 7495962cbc ("drm/amd/display: Disable fastboot on DCE 6 too")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29cc0f3aa7 ]
Quentin forwards a report from Hyesoo Yu, describing an interesting
problem with the use of WFxT in __delay() when a vcpu is loaded and
that KVM is *not* in VHE mode (either nVHE or hVHE).
In this case, CNTVOFF_EL2 is set to a non-zero value to reflect the
state of the guest virtual counter. At the same time, __delay() is
using get_cycles() to read the counter value, which is indirected to
reading CNTPCT_EL0.
The core of the issue is that WFxT is using the *virtual* counter,
while the kernel is using the physical counter, and that the offset
introduces a really bad discrepancy between the two.
Fix this by forcing the use of CNTVCT_EL0, making __delay() consistent
irrespective of the value of CNTVOFF_EL2.
Reported-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reported-by: Quentin Perret <qperret@google.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Fixes: 7d26b0516a ("arm64: Use WFxT for __delay() when possible")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/ktosachvft2cgqd5qkukn275ugmhy6xrhxur4zqpdxlfr3qh5h@o3zrfnsq63od
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a58b8764ae ]
`clippy` has changed behavior in [1] (Rust 1.95) where it no longer
warns about the `let_and_return` lint when a comment is placed between
the let binding and the return expression. Nightly thus fails to build,
because the expectation is no longer fulfilled.
Thus replace the expectation with an `allow`.
[ The errors were:
error: this lint expectation is unfulfilled
--> rust/pin-init/src/lib.rs:1279:10
|
1279 | #[expect(clippy::let_and_return)]
| ^^^^^^^^^^^^^^^^^^^^^^
|
= note: `-D unfulfilled-lint-expectations` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unfulfilled_lint_expectations)]`
error: this lint expectation is unfulfilled
--> rust/pin-init/src/lib.rs:1295:10
|
1295 | #[expect(clippy::let_and_return)]
| ^^^^^^^^^^^^^^^^^^^^^^
- Miguel ]
Link: https://github.com/rust-lang/rust-clippy/pull/16461 [1]
Signed-off-by: Benno Lossin <lossin@kernel.org>
Cc: stable@vger.kernel.org # Needed in 6.18.y and later.
Link: https://patch.msgid.link/20260215132232.1549861-1-lossin@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 621609f1e5 ]
These callback functions take a generic `T` that is used in the body as
the generic argument in `Registration` and `ThreadedRegistration`. Those
types require `T: 'static`, but due to a compiler bug this requirement
isn't propagated to the function. Thus add the bound. This was caught in
the upstream Rust CI [1].
[ The three errors looked similar and will start appearing with Rust
1.95.0 (expected 2026-04-16). The first one was:
error[E0310]: the parameter type `T` may not live long enough
Error: --> rust/kernel/irq/request.rs:266:43
|
266 | let registration = unsafe { &*(ptr as *const Registration<T>) };
| ^^^^^^^^^^^^^^^^^^^^^^
| |
| the parameter type `T` must be valid for the static lifetime...
| ...so that the type `T` will meet its required lifetime bounds
|
help: consider adding an explicit lifetime bound
|
264 | unsafe extern "C" fn handle_irq_callback<T: Handler + 'static>(_irq: i32, ptr: *mut c_void) -> c_uint {
| +++++++++
- Miguel ]
Link: https://github.com/rust-lang/rust/pull/149389 [1]
Signed-off-by: Benno Lossin <lossin@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 29e16fcd67 ("rust: irq: add &Device<Bound> argument to irq callbacks")
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/20260217222425.8755-1-cole@unwrap.rs/
Link: https://patch.msgid.link/20260214092740.3201946-1-lossin@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 003049b1c4 ]
The io_zcrx_put_niov_uref() function uses a non-atomic
check-then-decrement pattern (atomic_read followed by separate
atomic_dec) to manipulate user_refs. This is serialized against other
callers by rq_lock, but io_zcrx_scrub() modifies the same counter with
atomic_xchg() WITHOUT holding rq_lock.
On SMP systems, the following race exists:
CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock)
put_niov_uref:
atomic_read(uref) - 1
// window opens
atomic_xchg(uref, 0) - 1
return_niov_freelist(niov) [PUSH #1]
// window closes
atomic_dec(uref) - wraps to -1
returns true
return_niov(niov)
return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE]
The same niov is pushed to the freelist twice, causing free_count to
exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds
write (a u32 value) past the kvmalloc'd freelist array into the adjacent
slab object.
Fix this by replacing the non-atomic read-then-dec in
io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically
tests and decrements user_refs. This makes the operation safe against
concurrent atomic_xchg from scrub without requiring scrub to acquire
rq_lock.
Fixes: 34a3e60821 ("io_uring/zcrx: implement zerocopy receive pp memory provider")
Cc: stable@vger.kernel.org
Signed-off-by: Kai Aizen <kai@snailsploit.com>
[pavel: removed a warning and a comment]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00ac9e5af ]
Dave reports that kexec may fail when the first kernel boots via the EFI
stub but without EFI runtime services, as in that case, the RSDP address
field in struct bootparams is never assigned. Kexec copies this value
into the version of struct bootparams that it provides to the incoming
kernel, which may have no other means to locate the ACPI root pointer.
So take the value from the EFI config tables if no root pointer has been
set in the first kernel's struct bootparams.
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Cc: <stable@vger.kernel.org> # v6.1
Reported-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Link: https://lore.kernel.org/linux-efi/aZQg_tRQmdKNadCg@darkstar.users.ipa.redhat.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6766f59012 ]
Currently if we export a GPIO over sysfs and unbind the parent GPIO
controller, the exported attribute will remain under /sys/class/gpio
because once we remove the parent device, we can no longer associate the
descriptor with it in gpiod_unexport() and never drop the final
reference.
Rework the teardown code: provide an unlocked variant of
gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken
before unregistering the parent device itself. This is done to prevent
any new exports happening before we unregister the device completely.
Cc: stable@vger.kernel.org
Fixes: 1cd53df733 ("gpio: sysfs: don't look up exported lines as class devices")
Link: https://patch.msgid.link/20260212133505.81516-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be054cc66f ]
Commit 38a6f08657 ("net: sched: support hash selecting tx queue")
added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size is
computed as:
mapping_mod = queue_mapping_max - queue_mapping + 1;
The range size can be 65536 when the requested range covers all possible
u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX).
That value cannot be represented in a u16 and previously wrapped to 0,
so tcf_skbedit_hash() could trigger a divide-by-zero:
queue_mapping += skb_get_hash(skb) % params->mapping_mod;
Compute mapping_mod in a wider type and reject ranges larger than U16_MAX
to prevent params->mapping_mod from becoming 0 and avoid the crash.
Fixes: 38a6f08657 ("net: sched: support hash selecting tx queue")
Cc: stable@vger.kernel.org # 6.12+
Signed-off-by: Ruitong Liu <cnitlrt@gmail.com>
Link: https://patch.msgid.link/20260213175948.1505257-1-cnitlrt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffe68c3766 ]
dma_free_coherent() in error path takes priv->rx_buf.alloc_len as
the dma handle. This would lead to improper unmapping of the buffer.
Change the dma handle to priv->rx_buf.alloc_phys.
Fixes: 6af55ff52b ("Driver for Beckhoff CX5020 EtherCAT master module.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260213164340.77272-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbbe32618e ]
When user provides a bogus pat_index value through the madvise IOCTL, the
xe_pat_index_get_coh_mode() function performs an array access without
validating bounds. This allows a malicious user to trigger an out-of-bounds
kernel read from the xe->pat.table array.
The vulnerability exists because the validation in madvise_args_are_sane()
directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without
first checking if pat_index is within [0, xe->pat.n_entries).
Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug
builds, it still performs the unsafe array access in production kernels.
v2(Matthew Auld)
- Using array_index_nospec() to mitigate spectre attacks when the value
is used
v3(Matthew Auld)
- Put the declarations at the start of the block
Fixes: ada7486c56 ("drm/xe: Implement madvise ioctl for xe")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Jia Yao <jia.yao@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260205161529.1819276-1-jia.yao@intel.com
(cherry picked from commit 944a3329b0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f94711255a ]
Stefano reports that after commit 62089b8048 ("kbuild: rpm-pkg:
Generate debuginfo package manually"), building with an rpm package
using rpm 4.20.0 fails with:
RPM build errors:
Dependency tokens must begin with alpha-numeric, '_' or '/': #�) = 0x0d000002
Dependency tokens must begin with alpha-numeric, '_' or '/': �) = 0x0d000000
Dependency tokens must begin with alpha-numeric, '_' or '/': ) = 0x7c0e000000
Unknown rich dependency op 'Hat': (Red Hat 15.2.1-7)) = 0x3130363230322000
Unknown rich dependency op 'Hat': (Red Hat 15.2.1-7)) = 0x4728203a43434800
Unknown rich dependency op 'Hat': (Red Hat 15.2.1-7)) = 0x3130363230322000
Unknown rich dependency op 'Hat': (Red Hat 15.2.1-7)) = 0x4728203a43434800
This error comes from the automatic requirements feature of rpm. The
-debuginfo subpackage has no dependencies, so disable this feature with
'AutoReq: 0' for this subpackage, avoiding the error. This matches the
official %_debug_template macro that rpm provides. While automatic
provides should be default enabled, be explicit like %_debug_template
does.
Additionally, while in the area, add the manual debug information
package to the Development/Debug group, further aligning with
%_debug_template.
Cc: stable@vger.kernel.org
Fixes: 62089b8048 ("kbuild: rpm-pkg: Generate debuginfo package manually")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Closes: https://lore.kernel.org/CAGxU2F7FFNgb781_A7a1oL63n9Oy8wsyWceKhUpeZ6mLk=focw@mail.gmail.com/
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260216-improve-manual-debuginfo-template-v1-1-e584b3f8d3be@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff9cadd1a2 ]
The ASUS Vivobook Pro 15X (M6501RR) with AMD Ryzen 9 6900HX has an
internal DMIC that is not detected without a DMI quirk entry, as the
BIOS does not set the AcpDmicConnected ACPI _DSD property.
Adding the DMI entry enables the ACP6x DMIC machine driver to probe
successfully.
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo Salvini <guspatagonico@gmail.com>
Link: https://patch.msgid.link/20260210155156.29079-1-guspatagonico@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 600b665b90 ]
Attempting SOCKET_URING_OP_SETSOCKOPT on an AF_NETLINK socket resulted
in an -EOPNOTSUPP, as AF_NETLINK doesn't have an ioctl in its struct
proto, but only in struct proto_ops.
Prior to the blamed commit, io_uring_cmd_sock() only had two cmd_op
operations, both requiring ioctl, thus the check was warranted.
Since then, 4 new cmd_op operations have been added, none of which
depend on ioctl. This patch moves the ioctl check, so it only applies
to the original operations.
AFAICT, the ioctl requirement was unintentional, and it wasn't
visible in the blamed patch within 3 lines of context.
Cc: stable@vger.kernel.org
Fixes: a5d2f99aff ("io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58433885ee ]
The function gpio_device_get_desc() can return an error pointer and is
not checked for one. Add check for error pointer.
Fixes: ddeb66d2cb ("gpio: nomadik: don't print out global GPIO numbers in debugfs callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260214044531.43539-1-ethantidmore06@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14f66f4464 ]
In several places in the code, we have a label to signify
the start of the code where a request can be replayed if
necessary. However, some of these places were missing the
necessary reinitializations of certain local variables
before replay.
This change makes sure that these variables get initialized
after the label.
Cc: stable@vger.kernel.org
Reported-by: Yuchan Nam <entropy1110@gmail.com>
Tested-by: Yuchan Nam <entropy1110@gmail.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a983aae397 ]
In an unlikely case when io_populate_area_dma() fails, which could only
happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine,
io_zcrx_map_area() will have an initialised and not freed table. It was
supposed to be cleaned up in the error path, but !is_mapped prevents
that.
Fixes: 439a98b972 ("io_uring/zcrx: deduplicate area mapping")
Cc: stable@vger.kernel.org
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b28da0d092 ]
Fix Sun FFB1 corrupted video out ([1] and [2]) by disabling overlay and
initializing window mode to a known state. The issue never appeared on
my FFB2+/vertical nor Elite3D/M6. It could also depend on the PROM
version.
/SUNW,ffb@1e,0: FFB at 000001fc00000000, type 11, DAC pnum[236c] rev[10] manuf_rev[4]
X (II) /dev/fb0: Detected FFB1, Z-buffer, Single-buffered.
X (II) /dev/fb0: BT9068 (PAC1) ramdac detected (with normal cursor control)
X (II) /dev/fb0: Detected Creator/Creator3D
[1] https://www.instagram.com/p/DUTcSmSjSem/
[2] https://chaos.social/@ReneRebe/116023241660154102
Signed-off-by: René Rebe <rene@exactco.de>
Cc: stable@kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eacf9840ae ]
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup.
Fixes: cc3f414cf2 ("video: add of helper for display timings/videomode")
Cc: stable@vger.kernel.org
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b3b99243 ]
fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not
freed if the error path is reached.
Fixes: e7b995371f ("video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 011a050280 ]
If fbcon_open() fails when called from con2fb_acquire_newinfo() then
info->fbcon_par pointer remains NULL which is later dereferenced.
Add check for return value of the function con2fb_acquire_newinfo() to
avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d1baa4ffa6 ("fbcon: set_con2fb_map fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68eeb0871e ]
The fbdev sysfs attributes are registered after sending the uevent for
the device creation, leaving a race window where e.g. udev rules may
not be able to access the sysfs attributes because the registration is
not done yet.
Fix this by switching to device_create_with_groups(). This also results in
a nice cleanup. After switching to device_create_with_groups() all that
is left of fb_init_device() is setting the drvdata and that can be passed
to device_create[_with_groups]() too. After which fb_init_device() can
be completely removed.
Dropping fb_init_device() + fb_cleanup_device() in turn allows removing
fb_info.class_flag as they were the only user of this field.
Fixes: 5fc830d6ac ("fbdev: Register sysfs groups through device_add_group")
Cc: stable@vger.kernel.org
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f043a93fff ]
In some physical memory layout designs, the address space of CFMW (CXL
Fixed Memory Window) resides between multiple segments of system memory
belonging to the same NUMA node. In numa_cleanup_meminfo, these multiple
segments of system memory are merged into a larger numa_memblk. When
identifying which NUMA node the CFMW belongs to, it may be incorrectly
assigned to the NUMA node of the merged system memory.
When a CXL RAM region is created in userspace, the memory capacity of
the newly created region is not added to the CFMW-dedicated NUMA node.
Instead, it is accumulated into an existing NUMA node (e.g., NUMA0
containing RAM). This makes it impossible to clearly distinguish
between the two types of memory, which may affect memory-tiering
applications.
Example memory layout:
Physical address space:
0x00000000 - 0x1FFFFFFF System RAM (node0)
0x20000000 - 0x2FFFFFFF CXL CFMW (node2)
0x40000000 - 0x5FFFFFFF System RAM (node0)
0x60000000 - 0x7FFFFFFF System RAM (node1)
After numa_cleanup_meminfo, the two node0 segments are merged into one:
0x00000000 - 0x5FFFFFFF System RAM (node0) // CFMW is inside the range
0x60000000 - 0x7FFFFFFF System RAM (node1)
So the CFMW (0x20000000-0x2FFFFFFF) will be incorrectly assigned to node0.
To address this scenario, accurately identifying the correct NUMA node
can be achieved by checking whether the region belongs to both
numa_meminfo and numa_reserved_meminfo.
While this issue is only observed in a QEMU configuration, and no known
end users are impacted by this problem, it is likely that some firmware
implementation is leaving memory map holes in a CXL Fixed Memory Window.
CXL hotplug depends on mapping free window capacity, and it seems to be
only a coincidence to have not hit this problem yet.
Fixes: 779dd20cfb ("cxl/region: Add region creation support")
Signed-off-by: Cui Chao <cuichao1753@phytium.com.cn>
Cc: stable@vger.kernel.org
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260213060347.2389818-2-cuichao1753@phytium.com.cn
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6db8b56eed ]
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00).
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Cc: stable@vger.kernel.org
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260211040412.86195-1-qjx1298677004@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afdfb71c01 ]
Commit 62089b8048 ("kbuild: rpm-pkg: Generate debuginfo package
manually") added uses of OBJCOPY and READELF, variables from Kbuild.
These variables are defined and work properly when using the binrpm-pkg
target because rpmbuild is run within Kbuild. However, these variables
are not defined when building from a source RPM package generated with
the srcrpm-pkg target, breaking the build when generating the debug info
subpackage.
Define a default value for these variables so that these commands
respect the value from Kbuild but continue to work when built from a
source RPM package.
Cc: stable@vger.kernel.org
Fixes: 62089b8048 ("kbuild: rpm-pkg: Generate debuginfo package manually")
Reported-by: Lukas Herbolt <lukas@herbolt.com>
Closes: https://lore.kernel.org/20260212135855.147906-2-lukas@herbolt.com/
Tested-by: Lukas Herbolt <lukas@herbolt.com>
Link: https://patch.msgid.link/20260213-fix-debuginfo-srcrpm-pkg-v1-1-45cd0c0501b9@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffe9ac1ad5 ]
Commit 62089b8048 ("kbuild: rpm-pkg: Generate debuginfo package
manually") effectively reverted commit a7c699d090 ("kbuild: rpm-pkg:
build a debuginfo RPM") but the approach it took is not safe for older
RPM releases. Restore commit a7c699d090 ("kbuild: rpm-pkg: build a
debuginfo RPM") for the !CONFIG_MODULE_SIG case to allow more
environments and configurations to take advantage of the separate debug
information package process.
Cc: stable@vger.kernel.org
Fixes: 62089b8048 ("kbuild: rpm-pkg: Generate debuginfo package manually")
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Steve French <stfrench@microsoft.com>
Tested-by: Juergen Gross <jgross@suse.com>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260210-kbuild-fix-debuginfo-rpm-v1-2-0730b92b14bc@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d6b8b0e28 ]
Commit 62089b8048 ("kbuild: rpm-pkg: Generate debuginfo package
manually") moved away from the built-in RPM machinery for generating
-debuginfo packages to a more manual way to be compatible with module
signing, as the built-in machinery strips the modules after the
installation process, breaking the signatures.
Unfortunately, prior to rpm 4.20.0, there is a bug where a custom %files
directive is ignored for a -debuginfo subpackage [1], meaning builds
using older versions of RPM (such as on RHEL9 or RHEL10) fail with:
Checking for unpackaged file(s): /usr/lib/rpm/check-files .../rpmbuild/BUILDROOT/kernel-6.19.0_dirty-1.x86_64
error: Installed (but unpackaged) file(s) found:
/debuginfo.list
/usr/lib/debug/.build-id/09/748c214974bfba1522d434a7e0a02e2fd7f29b.debug
/usr/lib/debug/.build-id/0b/b96dd9c7d3689d82e56d2e73b46f53103cc6c7.debug
/usr/lib/debug/.build-id/0e/979a2f34967c7437fd30aabb41de1f0c8b6a66.debug
...
To workaround this, restrict the manual debug info package creation
process to when it is necessary (CONFIG_MODULE_SIG=y) and possible (when
using RPM >= 4.20.0). A follow up change will restore the RPM debuginfo
creation process using a separate internal flag to allow the package to
be built in more situations, as RPM 4.20.0 is a fairly recent version
and the built-in -debuginfo generation works fine when module signing is
disabled.
Cc: stable@vger.kernel.org
Fixes: 62089b8048 ("kbuild: rpm-pkg: Generate debuginfo package manually")
Link: 49f906998f [1]
Reported-by: Steve French <smfrench@gmail.com>
Closes: https://lore.kernel.org/CAH2r5mugbrHTwnaQwQiYEUVwbtqmvFYf0WZiLrrJWpgT8iwftw@mail.gmail.com/
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Steve French <stfrench@microsoft.com>
Tested-by: Juergen Gross <jgross@suse.com>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260210-kbuild-fix-debuginfo-rpm-v1-1-0730b92b14bc@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be55899b71 ]
Most samples cannot be build on some environments because they depend
on CC_CAN_LINK, which is set according to the result of
scripts/cc-can-link.sh called by cc_can_link_user.
Because cc-can-link.sh must now build without warning, it may fail
because it is calling printf() with an empty string:
+ cat
+ gcc -m32 -Werror -Wl,--fatal-warnings -x c - -o /dev/null
<stdin>: In function ‘main’:
<stdin>:4:9: error: zero-length gnu_printf format string [-Werror=format-zero-length]
cc1: all warnings being treated as errors
Fix this warning and the samples build by actually printing something.
Cc: stable@vger.kernel.org
Fixes: d81d9d389b ("kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260212133544.1331437-1-mic@digikod.net
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
