Commit graph

360,964 commits

Author SHA1 Message Date
Tejun Heo
1d3650f713 cfq-iosched: implement hierarchy-ready cfq_group charge scaling
Currently, cfqg charges are scaled directly according to cfqg->weight.
Regardless of the number of active cfqgs or the amount of active
weights, a given weight value always scales charge the same way.  This
works fine as long as all cfqgs are treated equally regardless of
their positions in the hierarchy, which is what cfq currently
implements.  It can't work in hierarchical settings because the
interpretation of a given weight value depends on where the weight is
located in the hierarchy.

This patch reimplements cfqg charge scaling so that it can be used to
support hierarchy properly.  The scheme is fairly simple and
light-weight.

* When a cfqg is added to the service tree, v(disktime)weight is
  calculated.  It walks up the tree to root calculating the fraction
  it has in the hierarchy.  At each level, the fraction can be
  calculated as

    cfqg->weight / parent->level_weight

  By compounding these, the global fraction of vdisktime the cfqg has
  claim to - vfraction - can be determined.

* When the cfqg needs to be charged, the charge is scaled inversely
  proportionally to the vfraction.

The new scaling scheme uses the same CFQ_SERVICE_SHIFT for fixed point
representation as before; however, the smallest scaling factor is now
1 (ie. 1 << CFQ_SERVICE_SHIFT).  This is different from before where 1
was for CFQ_WEIGHT_DEFAULT and higher weight would result in smaller
scaling factor.

While this shifts the global scale of vdisktime a bit, it doesn't
change the relative relationships among cfqgs and the scheduling
result isn't different.

cfq_group_notify_queue_add uses fixed CFQ_IDLE_DELAY when appending
new cfqg to the service tree.  The specific value of CFQ_IDLE_DELAY
didn't have any relevance to vdisktime before and is unlikely to cause
any visible behavior difference now especially as the scale shift
isn't that large.

As the new scheme now makes proper distinction between cfqg->weight
and ->leaf_weight, reverse the weight aliasing for root cfqgs.  For
root, both weights are now mapped to ->leaf_weight instead of the
other way around.

Because we're still using cfqg_flat_parent(), this patch shouldn't
change the scheduling behavior in any noticeable way.

v2: Beefed up comments on vfraction as requested by Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:11 -08:00
Tejun Heo
7918ffb5b8 cfq-iosched: implement cfq_group->nr_active and ->children_weight
To prepare for blkcg hierarchy support, add cfqg->nr_active and
->children_weight.  cfqg->nr_active counts the number of active cfqgs
at the cfqg's level and ->children_weight is sum of weights of those
cfqgs.  The level covers itself (cfqg->leaf_weight) and immediate
children.

The two values are updated when a cfqg enters and leaves the group
service tree.  Unless the hierarchy is very deep, the added overhead
should be negligible.

Currently, the parent is determined using cfqg_flat_parent() which
makes the root cfqg the parent of all other cfqgs.  This is to make
the transition to hierarchy-aware scheduling gradual.  Scheduling
logic will be converted to use cfqg->children_weight without actually
changing the behavior.  When everything is ready,
blkcg_weight_parent() will be replaced with proper parent function.

This patch doesn't introduce any behavior chagne.

v2: s/cfqg->level_weight/cfqg->children_weight/ as per Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:11 -08:00
Tejun Heo
e71357e118 cfq-iosched: add leaf_weight
cfq blkcg is about to grow proper hierarchy handling, where a child
blkg's weight would nest inside the parent's.  This makes tasks in a
blkg to compete against both tasks in the sibling blkgs and the tasks
of child blkgs.

We're gonna use the existing weight as the group weight which decides
the blkg's weight against its siblings.  This patch introduces a new
weight - leaf_weight - which decides the weight of a blkg against the
child blkgs.

It's named leaf_weight because another way to look at it is that each
internal blkg nodes have a hidden child leaf node which contains all
its tasks and leaf_weight is the weight of the leaf node and handled
the same as the weight of the child blkgs.

This patch only adds leaf_weight fields and exposes it to userland.
The new weight isn't actually used anywhere yet.  Note that
cfq-iosched currently offcially supports only single level hierarchy
and root blkgs compete with the first level blkgs - ie. root weight is
basically being used as leaf_weight.  For root blkgs, the two weights
are kept in sync for backward compatibility.

v2: cfqd->root_group->leaf_weight initialization was missing from
    cfq_init_queue() causing divide by zero when
    !CONFIG_CFQ_GROUP_SCHED.  Fix it.  Reported by Fengguang.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
2013-01-09 08:05:10 -08:00
Tejun Heo
3c54786590 blkcg: make blkcg_gq's hierarchical
Currently a child blkg (blkcg_gq) can be created even if its parent
doesn't exist.  ie. Given a blkg, it's not guaranteed that its
ancestors will exist.  This makes it difficult to implement proper
hierarchy support for blkcg policies.

Always create blkgs recursively and make a child blkg hold a reference
to its parent.  blkg->parent is added so that finding the parent is
easy.  blkcg_parent() is also added in the process.

This change can be visible to userland.  e.g. while issuing IO in a
nested cgroup didn't affect the ancestors at all, now it will
initialize all ancestor blkgs and zero stats for the request_queue
will always appear on them.  While this is userland visible, this
shouldn't cause any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:10 -08:00
Tejun Heo
93e6d5d8f5 blkcg: cosmetic updates to blkg_create()
* Rename out_* labels to err_*.

* Do ERR_PTR() conversion once in the error return path.

This patch is cosmetic and to prepare for the hierarchy support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:10 -08:00
Tejun Heo
86cde6b623 blkcg: reorganize blkg_lookup_create() and friends
Reorganize such that

* __blkg_lookup() takes bool param @update_hint to determine whether
  to update hint.

* __blkg_lookup_create() no longer performs lookup before trying to
  create.  Renamed to blkg_create().

* blkg_lookup_create() now performs lookup and then invokes
  blkg_create() if lookup fails.

* root_blkg creation in blkcg_activate_policy() updated accordingly.
  Note that blkcg_activate_policy() no longer updates lookup hint if
  root_blkg already exists.

Except for the last lookup hint bit which is immaterial, this is pure
reorganization and doesn't introduce any visible behavior change.
This is to prepare for proper hierarchy support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:10 -08:00
Tejun Heo
356d2e5810 blkcg: fix minor bug in blkg_alloc()
blkg_alloc() was mistakenly checking blkcg_policy_enabled() twice.
The latter test should have been on whether pol->pd_init_fn() exists.
This doesn't cause actual problems because both blkcg policies
implement pol->pd_init_fn().  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:10 -08:00
Vivek Goyal
b226e5c411 cfq-iosched: Print sync-noidle information in blktrace messages
Currently we attach a character "S" or "A" to the cfqq<pid>, to represent
whether queues is sync or async. Add one more character "N" to represent
whether it is sync-noidle queue or sync queue. So now three different
type of queues will look as follows.

cfq1234S   --> sync queus
cfq1234SN  --> sync noidle queue
cfq1234A   --> Async queue

Previously S/A classification was being printed only if group scheduling
was enabled. This patch also makes sure that this classification is
displayed even if group idling is disabled.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
1f23f12151 cfq-iosched: Get rid of unnecessary local variable
Use of local varibale "n" seems to be unnecessary. Remove it. This brings
it inline with function __cfq_group_st_add(), which is also doing the
similar operation of adding a group to a rb tree.

No functionality change here.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
6d816ec7c8 cfq-iosched: Rename few functions related to selecting workload
choose_service_tree() selects/sets both wl_class and wl_type.  Rename it to
choose_wl_class_and_type() to make it very clear.

cfq_choose_wl() only selects and sets wl_type. It is easy to confuse
it with choose_st(). So rename it to cfq_choose_wl_type() to make
it clear what does it do.

Just renaming. No functionality change.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
34b98d03bd cfq-iosched: Rename "service_tree" to "st" at some places
At quite a few places we use the keyword "service_tree". At some places,
especially local variables, I have abbreviated it to "st".

Also at couple of places moved binary operator "+" from beginning of line
to end of previous line, as per Tejun's feedback.

v2:
 Reverted most of the service tree name change based on Jeff Moyer's feedback.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
4d2ceea4cb cfq-iosched: More renaming to better represent wl_class and wl_type
Some more renaming. Again making the code uniform w.r.t use of
wl_class/class to represent IO class (RT, BE, IDLE) and using
wl_type/type to represent subclass (SYNC, SYNC-IDLE, ASYNC).

At places this patch shortens the string "workload" to "wl".
Renamed "saved_workload" to "saved_wl_type". Renamed
"saved_serving_class" to "saved_wl_class".

For uniformity with "saved_wl_*" variables, renamed "serving_class"
to "serving_wl_class" and renamed "serving_type" to "serving_wl_type".

Again, just trying to improve upon code uniformity and improve
readability. No functional change.

v2:
- Restored the usage of keyword "service" based on Jeff Moyer's feedback.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:09 -08:00
Vivek Goyal
3bf10fea3b cfq-iosched: Properly name all references to IO class
Currently CFQ has three IO classes, RT, BE and IDLE. At many a places we
are calling workloads belonging to these classes as "prio". This gets
very confusing as one starts to associate it with ioprio.

So this patch just does bunch of renaming so that reading code becomes
easier. All reference to RT, BE and IDLE workload are done using keyword
"class" and all references to subclass, SYNC, SYNC-IDLE, ASYNC are made
using keyword "type".

This makes me feel much better while I am reading the code. There is no
functionality change due to this patch.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-09 08:05:08 -08:00
John W. Linville
a9b8a894ad Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2013-01-09 11:01:37 -05:00
Andre Schramm
56bde0f328 ALSA: hdspm - Fix wordclock status on AES32
Use correct bitmask for AES32 cards to determine wordclock lock state,
add missing bitmask for sync check and make output of the corresponding
control and /proc coherent.

Signed-off-by: Andre Schramm <andre.schramm@iosono-sound.com>
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-09 16:59:24 +01:00
Andy Shevchenko
21fe3c5245 dma: dw_dmac: add dwc_chan_pause and dwc_chan_resume
We will use at least the dwc_chan_resume() later.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09 06:30:59 -08:00
Andy Shevchenko
f5c6a7df35 dw_dmac: update tx_node_active in dwc_do_single_block
The "else" keyword in the dw_dma_tasklet is removed as well. All together
simplifies the logic of the code and understanding of what is happening there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09 06:30:59 -08:00
Andy Shevchenko
21e93c1e7d dw_dmac: remove redundant check
There is no need to check the callback_required parameter, due to we check the
callback pointer to be a non-NULL.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09 06:30:59 -08:00
Andy Shevchenko
cbd65312ba dw_dmac: check for mapping errors
Otherwise we get a warning in case of CONFIG_DMA_API_DEBUG=y

[   45.775943] WARNING: at lib/dma-debug.c:933 check_unmap+0x5d6/0x6ac()
[   45.782369] dw_dmac dw_dmac.0: DMA-API: device driver failed to check map error[device address=0x00000000356efcc0] [size=28 bytes] [mapped as single]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09 06:30:59 -08:00
Andy Shevchenko
123de54341 dw_dmac: absence of pdata isn't critical when autocfg is set
The patch allows to probe the device when platform data is absent and hardware
auto configuration is enabled. In that case the default platform data is used
where the channel allocation order is set to ascending, channel priority is set
to ascending, and private property is set to true.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09 06:30:34 -08:00
Laxman Dewangan
b9bb37f548 dma: tegra: implement flags parameters for cyclic transfer
The flag parameter is added in the cyclic transfer request.
Use the flag option of:
- DMA_PREP_INTERRUPT for enabling interrupt.
- DMA_CTRL_ACK for deciding whether ack is requred or not for
  descriptor.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-09 06:13:32 -08:00
Borislav Petkov
f51bde6f0d x86, MCE: Retract most UAPI exports
Retract back most macro definitions which went into the
user-visible mce.h header. Even though those bits are mostly
hardware-defined/-architectural, their naming is not. If we export them
to userspace, any kernel unification/renaming/cleanup cannot be done
anymore since those are effectively cast in stone. Besides, if userspace
wants those definitions, they can write their own defines and go crazy.

Signed-off-by: Borislav Petkov <bp@suse.de>
2013-01-09 14:49:02 +01:00
Chris Wilson
ca320ac456 drm/i915: Use pixel size for computing linear offsets into a sprite
This fixes an original bug in the sprite code that miscomputed the
source offset into a linear YUV packed framebuffer, that was magnified
into an oops with

commit 5a35e99e81
Author: Damien Lespiau <damien.lespiau@intel.com>
Date:   Fri Oct 26 18:20:12 2012 +0100

    drm/i915: adjust sprite base address

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-09 14:20:24 +01:00
Johannes Berg
2d31986764 regulatory: fix restore_regulatory_settings
My commit 379b82f4c9
("regulatory: pass new regdomain to reset function")
broke the restore_regulatory_settings() function due
to a logic change. Consider this change:

-	reset_regdomains(true);
-	cfg80211_regdomain = cfg80211_world_regdom;
+	reset_regdomains(true, cfg80211_world_regdom);

This looks innocent enough, until you realise that the
called function (reset_regdomains) also resets the
cfg80211_world_regdom pointer, so that the old version
of the code would use the new object it pointed to and
the new version of the code uses the old object. This
lead to a double-free of this object.

Since reset_regdomains() sets it to &world_regdom, use
that directly.

Reported-by: Sujith Manoharan <sujith@msujith.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>
Reported-by: Bob Copeland <me@bobcopeland.com>
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-09 12:19:52 +01:00
Johannes Berg
4a484cffc5 regulatory: fix uevent
The uevent callback doesn't protect its access to
last_request, which now causes a warning since
the conversion to get_last_request(). Fix this by
allowing to use RCU protection for last_request.

Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-09 12:19:43 +01:00
Javi Merino
92039ed129 of: add missing documentation for of_platform_populate()
15c3597d (dt/platform: allow device name to be overridden) added a
lookup parameter to of_platform_populate() but did not update the
documentation.  This patch adds the missing documentation entry.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-09 11:49:52 +01:00
Wang Sheng-Hui
210b907acf btrfs: remove unnecessary cur_trans set before goto loop in join_transaction
In the big loop, cur_trans will be set fs_info->running_transaction
before it's used. And after kmem_cache_free it and goto loop, it will
be setup again. No need to setup it immediately after freed.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-09 11:48:33 +01:00
Masanari Iida
c46d5c04f3 sound: soc: Fix typo in sound/codecs
Correct spelling typo in sound/soc/codecs

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-09 11:44:56 +01:00
Masanari Iida
8a168ca707 treewide: Fix typo in various drivers
Correct spelling typo in printk within various drivers.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-09 11:43:32 +01:00
Liu Bo
2c016dc2cb btrfs: fix comment typos
Convert 'hepler' to 'helper'.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-09 11:40:52 +01:00
Wade Cline
46beb54db6 Update ibmvscsi module name in Kconfig.
The 'ibmvscsic' module is now simply 'ibmvscsi'; fix the Kconfig
description.

Signed-off-by: Wade Cline <clinew@linux.vnet.ibm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-09 11:38:57 +01:00
Tim Blechmann
b6741bc7a3 powerpc: fix typo (utilties -> utilities)
Signed-off-by: Tim Blechmann <tim@klingt.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-09 11:37:37 +01:00
Andrew Murray
59f5ca487c of: fix spelling mistake in comment
Signed-off-by: Andrew Murray <Andrew.Murray@arm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-09 11:36:38 +01:00
Takashi Iwai
6ab317419c ALSA: hda - Allow power_save_controller option override DCAPS
Change the power_save_controller option to bint from bool so that user
can override the runtime PM capability bit and force to enable or
disable the runtime PM.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-09 11:15:13 +01:00
David Henningsson
7ed4165e2d Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs"
This reverts commit 697c373e34.

The original patch was meant to remove clicking, but in fact caused even
more clicking instead.

Thanks to c4pp4 for doing most of the work with this bug.

BugLink: https://bugs.launchpad.net/bugs/886975
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-09 11:03:38 +01:00
Takashi Iwai
d7dab4dbbb ALSA: hda - Disable runtime D3 for Intel CPT & co
We've got a few bug reports that the runtime D3 results in the dead
HD-audio controller.  It seems that the problem is in a deeper level
than the sound driver itself, so as a temporal solution, disable the
feature for these controllers again.

Reported-and-tested-by: Vincent Blut <vincent.debian@free.fr>
Reported-and-tested-by: Maurizio Avogadro <mavoga@gmail.com>
Cc: <stable@vger.kernel.org> [v3.7]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-09 11:00:08 +01:00
Tony Prisk
3ccb1c1702 pwm: vt8500: Add polarity support
Add support to set polarity on PWM devices, allowing for inverted
duty cycles.

Also update the binding document to #pwm-cells = <3> to allow
passing the flags from devicetree.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-09 08:17:12 +01:00
Tony Prisk
8ab432caa4 pwm: vt8500: Register write busy test performed incorrectly
Correct operation for register writes is to perform a busy-wait
after writing the register. Currently the busy wait it performed
before, meaning subsequent register writes to bitfields may occur
before the previous field has been updated.

Also, all registers are defined as 32-bit read/write. Change
pwm_busy_wait() to use readl rather than readb.

Improve readability of code with defines for registers and bitfields.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-09 08:17:04 +01:00
Linus Torvalds
974b33586b ARM: arm-soc fixes for 3.8-rc
People are back from the holiday breaks, and it shows. Here are a bunch of
 fixes for a number of platforms:
  - A couple of small fixes for Nomadik
  - A larger set of changes for kirkwood/mvebu
    - uart driver selection, dt clocks, gpio-poweroff fixups,
      a few __init annotation fixes and some error handling improvement
      in their xor dma driver.
  - i.MX had a couple of minor fixes (and a critical one for flexcan2
    clock setup)
  - MXS has a small board fix and a framebuffer bugfix
  - A set of fixes for Samsung Exynos, fixing default bootargs and some
    Exynos5440 clock issues
  - A set of OMAP changes including PM fixes and a few sparse warning
    fixups
 
 All in all a bit more positive code delta than we'd ideally want to see
 here, mostly from the OMAP PM changes, but nothing overly crazy.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ7GYhAAoJEIwa5zzehBx31HMP/jqBBdEAKBoQrVPXgCISTkGp
 WzpPbFnt17R9uxVZFjsmlcTgBOURSkbDwENVnyJ4ZkVFOAQHOSCriyQFrsgeBAEj
 WU2FK3E6/V4BHob8hSqmbCjwRUyzOM6z4+oMZQgpBS2y0sgVWFySOE3Fe7cf1IJr
 11D5/mzOqRYu8fkXar2ksK752N7O5m9sZoJ4A8cJs1DBL8/a0c6ASZGkaKql0WFn
 hel6nFznTe/qZwGqjIOaWrFhUe9pmqRlRtTDT5hlmMzC4+O12TEBaFIrJHlq8SkZ
 nxSdZcD9ERAgp58zMEMzDI0ZNkdXTV3xRtkehTvaJheCpeAGq0J63fEd/Yn4T/V3
 fUeNrUqNLl59dZEvFS1Xm/2dpYLrUDCkNWQoTAjLAfEmJ1v9vjcP22seXD9tzXtl
 XdcjEIOnAb+d3J6D3vW1EvgPiTrS0EId5Mkv/LSIAyR0OAjqJr3L/keUUG2OVH1q
 UW7V052KEW0P0jDQnmhxNkkl8fnZCQtLRH9ukVs2qIbH28QBaH3irdFv+S74P2l2
 MWBqh21dm//PBJQqg1ujf0nl7IuCqDVaUYt6VYholGaRoyMaCSVsazJwC0/kzTNz
 EYVI8kAUIWQnAxXL5uN3oiqoSASKOfwtHGOJB7CB2FgdEVNWhdUpLk0xDi5ssF8o
 Iatq6W91y3xCkLhIP+77
 =s9fE
 -----END PGP SIGNATURE-----

Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "People are back from the holiday breaks, and it shows.  Here are a
  bunch of fixes for a number of platforms:
   - A couple of small fixes for Nomadik
   - A larger set of changes for kirkwood/mvebu
     - uart driver selection, dt clocks, gpio-poweroff fixups, a few
       __init annotation fixes and some error handling improvement in
       their xor dma driver.
   - i.MX had a couple of minor fixes (and a critical one for flexcan2
     clock setup)
   - MXS has a small board fix and a framebuffer bugfix
   - A set of fixes for Samsung Exynos, fixing default bootargs and some
     Exynos5440 clock issues
   - A set of OMAP changes including PM fixes and a few sparse warning
     fixups

  All in all a bit more positive code delta than we'd ideally want to
  see here, mostly from the OMAP PM changes, but nothing overly crazy."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: clps711x: Fix bad merge of clockevents setup
  ARM: highbank: save and restore L2 cache and GIC on suspend
  ARM: highbank: add a power request clear
  ARM: highbank: fix secondary boot and hotplug
  ARM: highbank: fix typos with hignbank in power request functions
  ARM: dts: fix highbank cpu mpidr values
  ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  pinctrl: mvebu: make pdma clock on dove mandatory
  ARM: Dove: Add pinctrl clock to DT
  dma: mv_xor: fix error handling for clocks
  dma: mv_xor: fix error handling of mv_xor_channel_add()
  arm: mvebu: Add missing ; for cpu node.
  arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
  arm: mvebu: Armada XP MV78230 has two cores, not one
  clk: mvebu: Remove inappropriate __init tagging
  ARM: Kirkwood: Use fixed-regulator instead of board gpio call
  ARM: Kirkwood: Fix missing sdio clock
  ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
  ...
2013-01-08 18:53:56 -08:00
Jiri Pirko
aaeb6cdfa5 remove init of dev->perm_addr in drivers
perm_addr is initialized correctly in register_netdevice() so to init it in
drivers is no longer needed.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 18:00:48 -08:00
Jiri Pirko
948b337e62 net: init perm_addr in register_netdevice()
Benefit from the fact that dev->addr_assign_type is set to NET_ADDR_PERM
in case the device has permanent address.

This also fixes the problem that many drivers do not set perm_addr at
all.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 18:00:47 -08:00
Cong Wang
c9be4a5c49 net: prevent setting ttl=0 via IP_TTL
A regression is introduced by the following commit:

	commit 4d52cfbef6
	Author: Eric Dumazet <eric.dumazet@gmail.com>
	Date:   Tue Jun 2 00:42:16 2009 -0700

	    net: ipv4/ip_sockglue.c cleanups

	    Pure cleanups

but it is not a pure cleanup...

	-               if (val != -1 && (val < 1 || val>255))
	+               if (val != -1 && (val < 0 || val > 255))

Since there is no reason provided to allow ttl=0, change it back.

Reported-by: nitin padalia <padalia.nitin@gmail.com>
Cc: nitin padalia <padalia.nitin@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 17:57:10 -08:00
Cong Wang
7265a6bbdd netconsole: add IPv6 example in doc
Update the netconsole document as well.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 17:56:10 -08:00
Cong Wang
b3d936f3ea netpoll: add IPv6 support
Currently, netpoll only supports IPv4. This patch adds IPv6
support to netpoll so that we can run netconsole over IPv6 network.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 17:56:10 -08:00
Cong Wang
acb3e04119 ipv6: move csum_ipv6_magic() and udp6_csum_init() into static library
As suggested by David, udp6_csum_init() is too big to be inlined,
move it to ipv6 static library, net/ipv6/ip6_checksum.c.

And the generic csum_ipv6_magic() too.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 17:56:10 -08:00
Cong Wang
b7394d2429 netpoll: prepare for ipv6
This patch adjusts some struct and functions, to prepare
for supporting IPv6.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 17:56:09 -08:00
Fabio Estevam
0c7768a098 net: fec: Remove 'inline' declarations
Fix the following warning when building with W=1 option:

drivers/net/ethernet/freescale/fec.c:810:1: warning: '__inline__' is not at beginning of declaration [-Wold-style-declaration]

The inline declaration is pointless in this function, so just remove it.

While at it, also remove the other 'inline' declarations.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 17:54:07 -08:00
Eric Dumazet
fda55eca5a net: introduce skb_transport_header_was_set()
We have skb_mac_header_was_set() helper to tell if mac_header
was set on a skb. We would like the same for transport_header.

__netif_receive_skb() doesn't reset the transport header if already
set by GRO layer.

Note that network stacks usually reset the transport header anyway,
after pulling the network header, so this change only allows
a followup patch to have more precise qdisc pkt_len computation
for GSO packets at ingress side.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 17:51:54 -08:00
David S. Miller
0edb7ede7d Merge branch 'delete-8390-EISA' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Paul Gortmaker says:

====================
I'd like to propose that we get rid of these old 8390 EISA drivers.
Of the five deleted here, I wrote four -- and while that doesn't give
me any authority for deletion above anyone else, it does at least
allow me to comment on the absolute absence of anyone reaching
out to the driver author for assistance in the last dozen years.

Eventually we'll probably get rid of EISA bus support, since in
x86, the hardware is close to 20 years old and already too resource
constrained to be useful today.  However there might still be
a few DEC Alpha enthusiasts with old EISA machines kept alive,
and so I expect we'll have to wait a bit longer to get unanimous
agreement to proceed with the full EISA removal (although I'd
love to be proven wrong on that).

Most of the DEC Alpha machines shipped in a PCI configuration, and
even the few that were EISA had DEC tulip based ethernet and no
reason to be needing the inferior 8390 technology.  So the interest
here for any possible DEC enthusiasts with EISA boxes about these
old 8390 drivers should be nil.

These really were rare cards -- in fact the smc-ultra32 is the only
one that I'd ever seen in person.  Even back in the mid 90's when
the drivers were written, I would guess that the user base was less
than 10 people across all of them.

The following patch was created with --irreversible-delete for
ease of review (it skips showing the content of files that are
deleted); however the complete patch can be pulled as per below.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08 17:49:28 -08:00
Tomas Winkler
627ca75733 mei: move work initialization to mei_device_init
Let mei_device_init initialize all the software constructs.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08 16:40:48 -08:00