Commit graph

360,964 commits

Author SHA1 Message Date
Eric W. Biederman
0c55cfc416 vfs: Allow unprivileged manipulation of the mount namespace.
- Add a filesystem flag to mark filesystems that are safe to mount as
  an unprivileged user.

- Add a filesystem flag to mark filesystems that don't need MNT_NODEV
  when mounted by an unprivileged user.

- Relax the permission checks to allow unprivileged users that have
  CAP_SYS_ADMIN permissions in the user namespace referred to by the
  current mount namespace to be allowed to mount, unmount, and move
  filesystems.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:21 -08:00
Eric W. Biederman
7a472ef4be vfs: Only support slave subtrees across different user namespaces
Sharing mount subtress with mount namespaces created by unprivileged
users allows unprivileged mounts created by unprivileged users to
propagate to mount namespaces controlled by privileged users.

Prevent nasty consequences by changing shared subtrees to slave
subtress when an unprivileged users creates a new mount namespace.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:20 -08:00
Eric W. Biederman
771b137168 vfs: Add a user namespace reference from struct mnt_namespace
This will allow for support for unprivileged mounts in a new user namespace.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:19 -08:00
Eric W. Biederman
8823c079ba vfs: Add setns support for the mount namespace
setns support for the mount namespace is a little tricky as an
arbitrary decision must be made about what to set fs->root and
fs->pwd to, as there is no expectation of a relationship between
the two mount namespaces.  Therefore I arbitrarily find the root
mount point, and follow every mount on top of it to find the top
of the mount stack.  Then I set fs->root and fs->pwd to that
location.  The topmost root of the mount stack seems like a
reasonable place to be.

Bind mount support for the mount namespace inodes has the
possibility of creating circular dependencies between mount
namespaces.  Circular dependencies can result in loops that
prevent mount namespaces from every being freed.  I avoid
creating those circular dependencies by adding a sequence number
to the mount namespace and require all bind mounts be of a
younger mount namespace into an older mount namespace.

Add a helper function proc_ns_inode so it is possible to
detect when we are attempting to bind mound a namespace inode.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:18 -08:00
Eric W. Biederman
a85fb273c9 vfs: Allow chroot if you have CAP_SYS_CHROOT in your user namespace
Once you are confined to a user namespace applications can not gain
privilege and escape the user namespace so there is no longer a reason
to restrict chroot.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:17 -08:00
Eric W. Biederman
50804fe373 pidns: Support unsharing the pid namespace.
Unsharing of the pid namespace unlike unsharing of other namespaces
does not take affect immediately.  Instead it affects the children
created with fork and clone.  The first of these children becomes the init
process of the new pid namespace, the rest become oddball children
of pid 0.  From the point of view of the new pid namespace the process
that created it is pid 0, as it's pid does not map.

A couple of different semantics were considered but this one was
settled on because it is easy to implement and it is usable from
pam modules.  The core reasons for the existence of unshare.

I took a survey of the callers of pam modules and the following
appears to be a representative sample of their logic.
{
	setup stuff include pam
	child = fork();
	if (!child) {
		setuid()
                exec /bin/bash
        }
        waitpid(child);

        pam and other cleanup
}

As you can see there is a fork to create the unprivileged user
space process.  Which means that the unprivileged user space
process will appear as pid 1 in the new pid namespace.  Further
most login processes do not cope with extraneous children which
means shifting the duty of reaping extraneous child process to
the creator of those extraneous children makes the system more
comprehensible.

The practical reason for this set of pid namespace semantics is
that it is simple to implement and verify they work correctly.
Whereas an implementation that requres changing the struct
pid on a process comes with a lot more races and pain.  Not
the least of which is that glibc caches getpid().

These semantics are implemented by having two notions
of the pid namespace of a proces.  There is task_active_pid_ns
which is the pid namspace the process was created with
and the pid namespace that all pids are presented to
that process in.  The task_active_pid_ns is stored
in the struct pid of the task.

Then there is the pid namespace that will be used for children
that pid namespace is stored in task->nsproxy->pid_ns.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:16 -08:00
Eric W. Biederman
1c4042c29b pidns: Consolidate initialzation of special init task state
Instead of setting child_reaper and SIGNAL_UNKILLABLE one way
for the system init process, and another way for pid namespace
init processes test pid->nr == 1 and use the same code for both.

For the global init this results in SIGNAL_UNKILLABLE being set
much earlier in the initialization process.

This is a small cleanup and it paves the way for allowing unshare and
enter of the pid namespace as that path like our global init also will
not set CLONE_NEWPID.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:15 -08:00
Eric W. Biederman
57e8391d32 pidns: Add setns support
- Pid namespaces are designed to be inescapable so verify that the
  passed in pid namespace is a child of the currently active
  pid namespace or the currently active pid namespace itself.

  Allowing the currently active pid namespace is important so
  the effects of an earlier setns can be cancelled.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:14 -08:00
Eric W. Biederman
225778d68d pidns: Deny strange cases when creating pid namespaces.
task_active_pid_ns(current) != current->ns_proxy->pid_ns will
soon be allowed to support unshare and setns.

The definition of creating a child pid namespace when
task_active_pid_ns(current) != current->ns_proxy->pid_ns could be that
we create a child pid namespace of current->ns_proxy->pid_ns.  However
that leads to strange cases like trying to have a single process be
init in multiple pid namespaces, which is racy and hard to think
about.

The definition of creating a child pid namespace when
task_active_pid_ns(current) != current->ns_proxy->pid_ns could be that
we create a child pid namespace of task_active_pid_ns(current).  While
that seems less racy it does not provide any utility.

Therefore define the semantics of creating a child pid namespace when
task_active_pid_ns(current) != current->ns_proxy->pid_ns to be that the
pid namespace creation fails.  That is easy to implement and easy
to think about.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:13 -08:00
Eric W. Biederman
af4b8a83ad pidns: Wait in zap_pid_ns_processes until pid_ns->nr_hashed == 1
Looking at pid_ns->nr_hashed is a bit simpler and it works for
disjoint process trees that an unshare or a join of a pid_namespace
may create.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:12 -08:00
Eric W. Biederman
5e1182deb8 pidns: Don't allow new processes in a dead pid namespace.
Set nr_hashed to -1 just before we schedule the work to cleanup proc.
Test nr_hashed just before we hash a new pid and if nr_hashed is < 0
fail.

This guaranteees that processes never enter a pid namespaces after we
have cleaned up the state to support processes in a pid namespace.

Currently sending SIGKILL to all of the process in a pid namespace as
init exists gives us this guarantee but we need something a little
stronger to support unsharing and joining a pid namespace.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:11 -08:00
Eric W. Biederman
0a01f2cc39 pidns: Make the pidns proc mount/umount logic obvious.
Track the number of pids in the proc hash table.  When the number of
pids goes to 0 schedule work to unmount the kernel mount of proc.

Move the mount of proc into alloc_pid when we allocate the pid for
init.

Remove the surprising calls of pid_ns_release proc in fork and
proc_flush_task.  Those code paths really shouldn't know about proc
namespace implementation details and people have demonstrated several
times that finding and understanding those code paths is difficult and
non-obvious.

Because of the call path detach pid is alwasy called with the
rtnl_lock held free_pid is not allowed to sleep, so the work to
unmounting proc is moved to a work queue.  This has the side benefit
of not blocking the entire world waiting for the unnecessary
rcu_barrier in deactivate_locked_super.

In the process of making the code clear and obvious this fixes a bug
reported by Gao feng <gaofeng@cn.fujitsu.com> where we would leak a
mount of proc during clone(CLONE_NEWPID|CLONE_NEWNET) if copy_pid_ns
succeeded and copy_net_ns failed.

Acked-by: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:59:10 -08:00
Eric W. Biederman
17cf22c33e pidns: Use task_active_pid_ns where appropriate
The expressions tsk->nsproxy->pid_ns and task_active_pid_ns
aka ns_of_pid(task_pid(tsk)) should have the same number of
cache line misses with the practical difference that
ns_of_pid(task_pid(tsk)) is released later in a processes life.

Furthermore by using task_active_pid_ns it becomes trivial
to write an unshare implementation for the the pid namespace.

So I have used task_active_pid_ns everywhere I can.

In fork since the pid has not yet been attached to the
process I use ns_of_pid, to achieve the same effect.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:09 -08:00
Eric W. Biederman
49f4d8b93c pidns: Capture the user namespace and filter ns_last_pid
- Capture the the user namespace that creates the pid namespace
- Use that user namespace to test if it is ok to write to
  /proc/sys/kernel/ns_last_pid.

Zhao Hongjiang <zhaohongjiang@huawei.com> noticed I was missing a put_user_ns
in when destroying a pid_ns.  I have foloded his patch into this one
so that bisects will work properly.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 05:57:31 -08:00
Arend van Spriel
f0dea9c73a mac80211: check add_chanctx callback before use in ieee80211_reconfig
During testing our mac80211 driver a fatal error occurred which was
signalled to mac80211. Upon performing the reconfiguration of the
device a WARN_ON was triggered. This warning checked the return value
of drv_add_chanctx(). However, this returns -EOPNOTSUPP when the
driver does not provide the callback. As the callback is optional
better check it is defined before calling drv_add_chanctx().

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19 14:48:19 +01:00
Adam Buchbinder
b3834be5c4 various: Fix spelling of "asynchronous" in comments.
"Asynchronous" is misspelled in some comments. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:32:13 +01:00
Adam Buchbinder
48fc7f7e78 Fix misspellings of "whether" in comments.
"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:31:35 +01:00
Adam Buchbinder
53f698cdeb eisa: Fix spelling of "asynchronous".
Some device IDs misspell "asynchronous". String change only.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:30:25 +01:00
Adam Buchbinder
d93cf0687c various: Fix spelling of "registered" in comments.
Some comments misspell "registered"; this fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:29:46 +01:00
Masanari Iida
4e79162a52 doc: fix quite a few typos within Documentation
Correct spelling typo in Documentations

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:28:24 +01:00
Masanari Iida
20879696b7 target: iscsi: fix comment typos in target/iscsi drivers
Correct spelling typo in printk and comment within target/iscsi drivers

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:17:31 +01:00
Masanari Iida
02582e9bcc treewide: fix typo of "suport" in various comments and Kconfig
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:16:09 +01:00
Takashi Iwai
989c318715 ALSA: hda - Fix recursive suspend/resume call
When the bus reset is performed during the suspend/resume (including
the power-saving too), it calls snd_hda_suspend() and
snd_hda_resume() again, and deadlocks eventually.

For avoiding the recursive call, add a new flag indicating that the PM
is being performed, and don't go to the bus reset mode when it's on.

Reported-and-tested-by: Julian Wollrath <jwollrath@web.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19 14:14:58 +01:00
Masanari Iida
d755814808 treewide: fix typo of "suppport" in various comments
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:13:52 +01:00
Paul Bolle
23e5047afc x86: remove offsets.h from .gitignore and dontdiff
Commit 77d1a49995 ("x86, boot: make
symbols from the main vmlinux available") removed all traces of
offsets.h from the tree. Remove its entries in dontdiff and x86/boot's
.gitignore file too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:10:53 +01:00
Jesper Juhl
59dbaf0415 gen_init_cpio: remove redundant empty line
Just a completely trivial patch to remove a completely redundant blank
line from usr/gen_init_cpio.c

Signed-off-by: Jesper Juhl <jj@codesealer.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:09:36 +01:00
Catalin Marinas
7a6cf9328c Merge branch 'execve' into upstream
* execve:
  arm64: get rid of fork/vfork/clone wrappers
2012-11-19 11:53:18 +00:00
Catalin Marinas
5653cde750 Merge remote-tracking branch 'viro/arch-arm64' into execve
* viro/arch-arm64:
  arm64: get rid of fork/vfork/clone wrappers
2012-11-19 11:51:36 +00:00
Russell King
2079f30e9e Merge branch 'asid-allocation' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable 2012-11-19 11:30:49 +00:00
Russell King
f27d9b7198 Merge branch 'for-rmk/prot-none' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable 2012-11-19 11:30:29 +00:00
Russell King
c71d4aa7e9 Merge branch 'hw-breakpoint' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable 2012-11-19 11:23:08 +00:00
Russell King
667832da84 Merge branch 'perf/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable 2012-11-19 11:22:35 +00:00
Matthias Brugger
4ee9a5377b OMAPFB: Delete if statement evaluating a constant.
Variable r is never set to any value different to zero.
Delete the if statement as it will never executed.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-19 13:12:41 +02:00
Eric W. Biederman
ae06c7c83f procfs: Don't cache a pid in the root inode.
Now that we have s_fs_info pointing to our pid namespace
the original reason for the proc root inode having a struct
pid is gone.

Caching a pid in the root inode has led to some complicated
code.  Now that we don't need the struct pid, just remove it.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 03:09:35 -08:00
Eric W. Biederman
e656d8a6f7 procfs: Use the proc generic infrastructure for proc/self.
I had visions at one point of splitting proc into two filesystems.  If
that had happened proc/self being the the part of proc that actually deals
with pids would have been a nice cleanup.  As it is proc/self requires
a lot of unnecessary infrastructure for a single file.

The only user visible change is that a mounted /proc for a pid namespace
that is dead now shows a broken proc symlink, instead of being completely
invisible.  I don't think anyone will notice or care.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 03:09:34 -08:00
Eric W. Biederman
dd34ad35c3 userns: On mips modify check_same_owner to use uid_eq
The kbuild test robot <fengguang.wu@intel.com> report the following error
when building mips with user namespace support enabled.

All error/warnings:
arch/mips/kernel/mips-mt-fpaff.c: In function 'check_same_owner':
arch/mips/kernel/mips-mt-fpaff.c:53:22: error: invalid operands to binary == (have 'kuid_t' and 'kuid_t')
arch/mips/kernel/mips-mt-fpaff.c:54:15: error: invalid operands to binary == (have 'kuid_t' and 'kuid_t')

Replace "a == b" with uid_eq(a, b) removes this error and allows the
code to work with user namespaces enabled.

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-19 03:05:15 -08:00
Abhilash Kesavan
963f2076e3 i2c: s3c2410: Fix code to free gpios
Store the requested gpios so that they can be freed on error/removal.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-19 11:55:39 +01:00
Abhilash Kesavan
658122fe5e i2c: s3c2410: Add fix for i2c suspend/resume
The I2C driver makes a gpio_request during initialization. This request
happens again on resume and fails due to the earlier successful request.
Re-factor the code to only initialize the gpios during probe.

Errors on resume without this:
[   16.020000] s3c-i2c s3c2440-i2c.0: gpio [42] request failed
[   16.020000] s3c-i2c s3c2440-i2c.1: gpio [44] request failed
[   16.020000] s3c-i2c s3c2440-i2c.2: gpio [6] request failed

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-19 11:54:55 +01:00
Abhilash Kesavan
3b2f3ceb3c i2c: s3c2410: Fix code to free gpios
Store the requested gpios so that they can be freed on error/removal.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-19 11:54:54 +01:00
Steven Rostedt
6c8d8b3c69 x86_32: Return actual stack when requesting sp from regs
As x86_32 traps do not save sp when taken in kernel mode, we need to
accommodate the sp when requesting to get the register.

This affects kprobes.

Before:

 # echo 'p:ftrace sys_read+4 s=%sp' > /debug/tracing/kprobe_events
 # echo 1 > /debug/tracing/events/kprobes/enable
 # cat trace
            sshd-1345  [000] d...   489.117168: ftrace: (sys_read+0x4/0x70) s=b7e96768
            sshd-1345  [000] d...   489.117191: ftrace: (sys_read+0x4/0x70) s=b7e96768
             cat-1447  [000] d...   489.117392: ftrace: (sys_read+0x4/0x70) s=5a7
             cat-1447  [001] d...   489.118023: ftrace: (sys_read+0x4/0x70) s=b77ad05f
            less-1448  [000] d...   489.118079: ftrace: (sys_read+0x4/0x70) s=b7762e06
            less-1448  [000] d...   489.118117: ftrace: (sys_read+0x4/0x70) s=b7764970

After:
            sshd-1352  [000] d...   362.348016: ftrace: (sys_read+0x4/0x70) s=f3febfa8
            sshd-1352  [000] d...   362.348048: ftrace: (sys_read+0x4/0x70) s=f3febfa8
            bash-1355  [001] d...   362.348081: ftrace: (sys_read+0x4/0x70) s=f5075fa8
            sshd-1352  [000] d...   362.348082: ftrace: (sys_read+0x4/0x70) s=f3febfa8
            sshd-1352  [000] d...   362.690950: ftrace: (sys_read+0x4/0x70) s=f3febfa8
            bash-1355  [001] d...   362.691033: ftrace: (sys_read+0x4/0x70) s=f5075fa8

Link: http://lkml.kernel.org/r/1342208654.30075.22.camel@gandalf.stny.rr.com

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-19 05:31:37 -05:00
Masanari Iida
744627e91c treewide: fix printk typo in multiple drivers
Correct spelling typo in multiple drivers.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 11:08:17 +01:00
Benjamin Tissoires
4a200c3b9a HID: i2c-hid: introduce HID over i2c specification implementation
Microsoft published the protocol specification of HID over i2c:
http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx

This patch introduces an implementation of this protocol.

This implementation does not includes the ACPI part of the specification.
This will come when ACPI 5.0 devices enumeration will be available.

Once the ACPI part is done, OEM will not have to declare HID over I2C
devices in their platform specific driver.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 11:04:38 +01:00
Aaro Koskinen
0857ba3c24 i2c: i2c-cbus-gpio: introduce driver
Add i2c driver to enable access to devices behind CBUS on Nokia Internet
Tablets.

The patch also adds CBUS I2C configuration for N8x0 which is one of the
users of this driver.

Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-19 09:57:16 +01:00
Takashi Iwai
0ced14fbda Merge branch 'usb-midi-fix-3.7' of git://git.alsa-project.org/alsa-kprivate into for-linus
Merge a regression fix for USB MIDI on non-standard usb-audio drivers
by Clemens.
2012-11-19 09:55:06 +01:00
Tushar Behera
c415187b68 OMAPFB: Fix possible null pointer dereferencing
Commit 952cbaaa9b (OMAPFB: Change
dssdev->manager references) added checks for OMAPFB_WAITFORVSYNC ioctl
to verify that the display, output and overlay manager exist. However,
the code erroneously uses && for each part, which means that
OMAPFB_WAITFORVSYNC may crash the kernel if no display, output or
manager is associated with the framebuffer.

This patch fixes the issue by using ||.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-19 10:41:50 +02:00
Laxman Dewangan
5928f53896 regulator: max8973: add regulator driver support
The MAXIM MAX8973 high-efficiency, three phase, DC-DC step-down
switching regulator delievers up to 9A of output current. Each
phase operates at a 2MHz fixed frequency with a 120 deg shift
from the adjacent phase, allowing the use of small magnetic
component.

Add regulator driver for this device.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-19 17:03:11 +09:00
Mark Brown
80da549e52 Linux 3.7-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQpuujAAoJEHm+PkMAQRiG57gIAJAETX7smg5arajbgo+qO2Y8
 l9sEwacwYSiLT9niiYFK17NeaBkJDN3iU6gkbHGkfyvjFcqIC89aCtVdfdfBiSja
 j460qu4cJ/K0/LEo5JR+GCu9YDdITlsCrfhjCXGBysUYI+nT13A9xW8wuNgxKBBu
 qNcbMaWCz4q4qoqGjyu1DJZV85z/7bpotMf2k+ZpZrCZZRVzlu+ZfeFijn7FGnzO
 qS3v4T5/ARHvM8FnBMfbiFjR4ANpRgTvcZOIar+GZlmMNH48YShieZ2SM5w0sj7j
 UPU5+oV96HRabDeFIo61qSvXJluU7V8FfpyJxNx0cuTgtuUDR++OiJ2VM1XQUbg=
 =mpVh
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc6' into asoc-wm2200

Linux 3.7-rc6
2012-11-19 17:02:14 +09:00
Qing Xu
eba3b670a9 max8925_power: Add support for device-tree initialization
This patch adds support for initializing platform data from the
device-tree description.

Signed-off-by: Qing Xu <qingx@marvell.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 23:54:07 -08:00
Lad, Prabhakar
e37212aa5d ARM: davinci: dm644x: fix out range signal for ED
Fix the video clock setting when custom timings are used with
pclock <= 27MHz. Existing video clock selection uses PLL2 mode
which results in a 54MHz clock whereas using the MXI mode results
in a 27MHz clock (which is the one actually desired).

This bug affects the Enhanced Definition (ED) support on DM644x.
Without this patch, out-range signals errors are were observed on
the TV when viewing ED. An out-of-range signal is often caused when
the field rate is above the rate that the television will handle.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
[nsekhar@ti.com: reword commit message based on on-list discussion]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-11-19 13:07:39 +05:30
Thomas Abraham
868b2f2374 ARM: EXYNOS: Remove i2c0 resource information and setting of device names
All EXYNOS5 based platforms support only device tree based boot and so the
unused non-dt code that sets i2c0 resource information and device names for
sdhci and i2c platform devices are removed.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-19 16:24:46 +09:00