Commit graph

360,964 commits

Author SHA1 Message Date
Joachim Eastwood
0ac433a719 ARM: AT91: Add usart/tc/pio/ohci DT clock lookup to AT91RM9200
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:51:09 +08:00
Joachim Eastwood
454c46df83 ARM: AT91: Add DT support to AT91RM9200 System Timer
Based on AT91 PIT DT patch from Jean-Christophe PLAGNIOL-VILLARD.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:51:08 +08:00
Joachim Eastwood
35ed3c7a3d ARM: AT91: Fix build failure on board-dt
We need CONFIG_SOC_AT91SAM9 to get the at91sam926x_timer
symbol used in board-dt.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:51:08 +08:00
Jean-Christophe PLAGNIOL-VILLARD
ee867d8eab ARM: at91: add Ronetix pm9g45 board support
CPU Module with ATMEL AT91SAM9G45
http://www.ronetix.at/pm9g45.html

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:51:07 +08:00
Jean-Christophe PLAGNIOL-VILLARD
c58c0c5acc ARM: at91: dt: at91sam9260: split rts and cts pinctrl not
as we just use the rts and not the rts & cts for rs485

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 07:50:56 +08:00
Pali Rohár
0bc98cc615 power_supply: Add bq2415x charger driver
The bq2415x charger driver is needed for example on Nokia N900 for
charging battery. Driver is part of open source project to replace
proprietary battery management.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 15:39:04 -08:00
Francois Romieu
8495c0da20 sis900: fix sis900_set_mode call parameters.
Leftover of 57d6d456cf ("sis900: stop
using net_device.{base_addr, irq} and convert to __iomem.").

It is needed for suspend / resume to work.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Jan Janssen <medhefgo@web.de>
Cc: Daniele Venzano <venza@brownhat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 18:28:15 -05:00
Pali Rohár
04930baf28 power_supply: Add new Nokia RX-51 (N900) power supply battery driver
This driver exporting battery design capacity, temperature and voltage for
battery in Nokia RX-51. This driver is needed for open source battery
management on Nokia RX-51 (N900).

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 15:11:33 -08:00
Alan Cox
a879f19fe7 max17042_battery: Fix missing verify_model_lock() return value check
The second error check is unreachable because the lock function isn't
assigned to ret.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 14:59:47 -08:00
Jean-Christophe PLAGNIOL-VILLARD
9e3129e937 ARM: at91: fix usart/uart namimg in pinctrl
USART are the full pin uart
DBGU the debug Unit
UART the two pin uart

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 06:54:31 +08:00
Jean-Christophe PLAGNIOL-VILLARD
d9b4fe837d ARM: at91sam9: add macb pinctrl support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 06:54:25 +08:00
Marcin Slusarz
3bb076af2a drm/nouveau/bios: fix DCB v1.5 parsing
memcmp->nv_strncmp conversion, in addition to name change, should have
inverted the return value.

But nv_strncmp does not act like strncmp - it does not check for string
terminator, returns true/false instead of -1/0/1 and has different
parameters order.

Let's rename it to nv_memcmp and let it act like memcmp.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-19 08:54:20 +10:00
Maarten Lankhorst
d9c390561d drm/nouveau: add missing pll_calc calls
Fixes a null pointer dereference when reclocking on my fermi.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-19 08:52:30 +10:00
Marcin Slusarz
bf7e438bca drm/nouveau: fix crash with noaccel=1
Reported-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-19 08:52:20 +10:00
Marcin Slusarz
1f150b3e7a drm/nv40: allocate ctxprog with kmalloc
Some archs defconfigs have CONFIG_FRAME_WARN set to 1024, which lead to this
warning:
drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c: warning: the frame size
of 1184 bytes is larger than 1024 bytes

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-19 08:52:07 +10:00
Kelly Doran
4113014f2d drm/nvc0/disp: fix thinko in vblank regression fix..
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-19 08:52:03 +10:00
Dan Carpenter
8511748ba1 ds2782_battery: Fix signedness bug in ds278x_read_reg16()
We need to check for negative values before doing the swab16() for the
error handling to work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 14:46:39 -08:00
Jean-Christophe PLAGNIOL-VILLARD
7ebd7a3ae0 pinctrl: at91 add deglitch, debounce, pull down and schmitt trigger mux option support
add :
 set_deglitch: enable/disable deglitch
 set_debounce: enable/disable debounce
 set_pulldown: enable/disable pulldown
 disable_schmitt_trig: disable schmitt trigger

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 06:35:55 +08:00
Jean-Christophe PLAGNIOL-VILLARD
32b01a366e pinctrl: at91: provide gpio names
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19 06:35:37 +08:00
Stefan Achatz
955dca354c HID: roccat: fix wrong attr size for koneplus tcu
More thorough testing revealed a typo in last koneplus cleanups.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-18 22:58:28 +01:00
Al Viro
3587b1b097 fanotify: fix FAN_Q_OVERFLOW case of fanotify_read()
If the FAN_Q_OVERFLOW bit set in event->mask, the fanotify event
metadata will not contain a valid file descriptor, but
copy_event_to_user() didn't check for that, and unconditionally does a
fd_install() on the file descriptor.

Which in turn will cause a BUG_ON() in __fd_install().

Introduced by commit 352e3b2492 ("fanotify: sanitize failure exits in
copy_event_to_user()")

Mea culpa - missed that path ;-/

Reported-by: Alex Shi <lkml.alex@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-18 09:30:00 -10:00
Linus Torvalds
8d938105e4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc VFS fixes from Al Viro:
 "Remove a bogus BUG_ON() that can trigger spuriously + alpha bits of
  do_mount() constification I'd missed during the merge window."

This pull request came in a week ago, I missed it for some reason.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill bogus BUG_ON() in do_close_on_exec()
  missing const in alpha callers of do_mount()
2012-11-18 09:13:48 -10:00
Linus Torvalds
aa7202c251 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fix from Geert Uytterhoeven:
 "This is a bug fix for asm constraints that affect sending RT signals,
  also destined for -stable."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: fix sigset_t accessor functions
2012-11-18 08:36:24 -10:00
Linus Torvalds
5ad27d6ca5 Last minute GPIO fixes for the v3.7 series:
- Disable blinking on the Orion GPIO driver
 - Two Kconfig-style fixes to avoid broken builds
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQqAG0AAoJEEEQszewGV1zOioP/iDD6lmV9SLbRXuFtIwzuXiZ
 c+2OHvfrprHxEc4DiLajxA9vFhqyh3HjNj1f9U0c17P9G4c6TCkFRxWtUEdfI0Ls
 z/0oFWQBG3E0wK9xAKup9ochz4h8I99HDCbjw8rrgaVlYDsrnd5mERzlzgV9OzB8
 4GGw9JD8USwo2qZ0ThISxzsI9PDz+FFgKYumRBOhwAfSVbHkVIxLqkMYge8vI7kf
 ck/MVrpS6sBRPX9uyzbDaoPxodQb4cYVqmUY9v2GmmK+FY3OQUisK0d0k5h2pWQP
 j7TWRwMgaeYXgsv1wG53/Ay6B48k1Wv1N4vwwJ/4skBZEWi7TwcuGQydWeUo96hb
 nDQWc0AuEXZ1HIewRxqHeTaxJHi/OBB6W5hxzc+TuOTw3Xi491DWmiuf4h6WvpRS
 s0wwMJ8xN8sekRgmhE321FmyGoviSoqIaT2VAXXOGWf+NSaKuBcq22adydgLYoFM
 j9h66aEoPESvtNlOifHs6cfwsq9jBEaQu7fG1JQITU3MjpjWgCFQB2JvdVIwqDuR
 yJNprr6/RNRIEFXZEtZQgYXb1G515RUCzjjAcUQtfY7IRInCDK8BBvv9wcdZw6+G
 3oLjF7TQpCWK/Ed+2nkeN1A5lZqVASdNx9gjnMLeS3u9IpxfjgBDQwyPELSNst3I
 CyYQdyLwOpNd26Nk/HJq
 =UBlv
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull last minute GPIO fixes from Linus Walleij:

 - Disable blinking on the Orion GPIO driver

 - Two Kconfig-style fixes to avoid broken builds

* tag 'gpio-fixes-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio-mcp23s08: Build I2C support even when CONFIG_I2C=m
  gpio: adnp: Depend on OF_GPIO instead of OF
  mvebu-gpio: Disable blinking when enabling a GPIO for output
2012-11-18 08:32:59 -10:00
Linus Torvalds
d28d3730fd xfs: bugfixes for 3.7-rc7
- fix attr tree double split corruption
 - fix broken error handling in xfs_vm_writepage
 - drop buffer io reference when a bad bio is built
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQp7sfAAoJENaLyazVq6ZOWHwP/2WTlenvM74i8HDa/nYW8KTC
 EubCZ6X1C7LPTV9tm9YUpKZ1VtI1O+OmuGcSmWdBKSMMoBVNyKvWXvrJeVKBVtXV
 sQ/jh1zCiPYzt9DfxGuarkw8Uy5qKNOYrbEAK1WwPMeOsDODYncfmTm+A/VYMeTt
 bWOjaxFd5QQOMuf0x9NO/keZc84R5l51ezYxA7HyYa5XvV/MDmLLVL0IhuSTFKyw
 oOiQMp0hby4zsJg6nqu/eINmdlgBIw+32m8aMSB2jreUQm4yvt0CY7M3Zq6sPmsM
 2tC6cFonPw31FBBu9jvv9h5wNz7McyzxtZBS0+zDV+7K0UrIyxWm1BhzZIXoXzLz
 vHwc4gnZV8nOP/g34aftHLYYRD3ZJhG8mX5AdBRzlWWqDSFvYVEq+1evHrv8kk4l
 coTapzimNnR3aJ16qdP1M0gExKO9nrGVqrRi8ndLNbxLpxC9mFG7CfJBQPMumukX
 G8pTV1wQvqONHDNlN4mxqMBHN0d9dGp5xjYQ0Q92/siIA1C5szjCwTHekKNrP6Ol
 7xd+nO7Xcgj7Uwaakv31paqOSAGhla6H5jvxPF2A54hZWQqlp88QpChLt3LFPxwh
 tEYTEf1zRoaoCS4TD3zMYTLY+9cXvUybSIf3hbgns+JMYHJtuZdzbvcaXE6Wl4Jr
 6esA5fsBFP1J2/EzpLof
 =depY
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-v3.7-rc7' of git://oss.sgi.com/xfs/xfs

Pull xfs bugfixes from Ben Myers:

 - fix attr tree double split corruption

 - fix broken error handling in xfs_vm_writepage

 - drop buffer io reference when a bad bio is built

* tag 'for-linus-v3.7-rc7' of git://oss.sgi.com/xfs/xfs:
  xfs: drop buffer io reference when a bad bio is built
  xfs: fix broken error handling in xfs_vm_writepage
  xfs: fix attr tree double split corruption
2012-11-18 08:29:34 -10:00
Linus Torvalds
5e30c089e5 If you were going to shoot me for not sending these earlier, you would be
right.  -rc6 beat me by ~2 hours it seems, and they really should have
 gone out long before that.
 
 These have been in libata-dev.git for a day or so (unfortunately
 linux-next is on vacation).  The main one is #1, with the others being
 minor bits.  #1 has multiple tested-by, and can be considered a
 regression fix IMO.
 
 1) Fix ACPI oops, https://bugzilla.kernel.org/show_bug.cgi?id=48211
 
 2) Temporary WARN_ONCE() debugging patch for further ACPI debugging.
    The code already oopses here, and so this merely gives slightly
    better info.  Related to https://bugzilla.kernel.org/show_bug.cgi?id=49151
    which has been bisected down to a patch that _exposes_ a latest bug,
    but said bisection target does not actually appear to be the root cause
    itself.
 
 3) sata_svw: fix longstanding error recovery bug, which was
    preventing kdump, by adding missing DMA-start bit check.  Core
    code was already checking DMA-start, but ancillary, less-used
    routines were not.  Fixed.
 
 4) sata_highbank: fix minor __init/__devinit warning
 
 5) Fix minor warning, if CONFIG_PM is set, but CONFIG_PM_SLEEP is not set
 
 6) pata_arasan: proper functioning requires clock setting
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUKcUVSWzCDIBeCsvAQIbhQ/+OUl+AcgvrF4+90Gv1TfuSSWlzEHjOQ/N
 CQdx5da2OQhOE3rGEyaqBRt5L+bM20QLimH67QvQirhx4+cm2DtE2VcUS2ZpMh5P
 BHnk2nuZb77m0XKbRc2u1DxxLq4HIYljKmJXnaCYp6d+o8E2ETdGIt9Zj9yxVscC
 v63M28L0ab31gisAIXAbNXx+/iS3mtfIl5G8u0b0XNVixO0f/uRc/rl1feB3UvJF
 GGRPZGExrCwy9RXMvqi+nRVu5HAHQ4iLp6aoMknR/URGvymmGE0h0tpiy05UfP64
 7O2hb9LJMVwSKuSkFVlRcKHKPrDisQs+bFT7a208AqVyAI3kv1ZHKDdcSRlGXnVd
 uy6jHL/+LKONefC3xjYoyctxZTCLIJCXg6lydwLG3R7HlrId3HVfnrukAvNo+nCR
 D47gV8llj9LIrQg8nyZvOwQR8CVXD8oUV2mPU/P6Br8otZ5dlfrCb5jqhzYfel+Z
 XPbBT/OIfO1JPVRGuyKlR3SCujT1x9VqETD0yj/XkxkDiKqOWbfMzu2beRQtYYsT
 ZDKd+niVxOjoLbDEIOEgRkoAdVgQ8EkH0+c12gmTho18UIvXj2NeZMyNw9/UX5p2
 VqT25aCG5vcffI+sSz1LTjWc6OAHNTW7dEkFlsAxyTIHe347yQwrATZ/iqhBj5Ci
 rpv517rYfl0=
 =V0y8
 -----END PGP SIGNATURE-----

Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata fixes from Jeff Garzik:
 "If you were going to shoot me for not sending these earlier, you would
  be right.  -rc6 beat me by ~2 hours it seems, and they really should
  have gone out long before that.

  These have been in libata-dev.git for a day or so (unfortunately
  linux-next is on vacation).  The main one is #1, with the others being
  minor bits.  #1 has multiple tested-by, and can be considered a
  regression fix IMO.

   1) Fix ACPI oops:

        https://bugzilla.kernel.org/show_bug.cgi?id=48211

   2) Temporary WARN_ONCE() debugging patch for further ACPI debugging.

      The code already oopses here, and so this merely gives slightly
      better info.  Related to

        https://bugzilla.kernel.org/show_bug.cgi?id=49151

      which has been bisected down to a patch that _exposes_ a latest
      bug, but said bisection target does not actually appear to be the
      root cause itself.

   3) sata_svw: fix longstanding error recovery bug, which was
      preventing kdump, by adding missing DMA-start bit check.  Core
      code was already checking DMA-start, but ancillary, less-used
      routines were not.  Fixed.

   4) sata_highbank: fix minor __init/__devinit warning

   5) Fix minor warning, if CONFIG_PM is set, but CONFIG_PM_SLEEP is not
      set

   6) pata_arasan: proper functioning requires clock setting"

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] PM callbacks should be conditionally compiled on CONFIG_PM_SLEEP
  sata_svw: check DMA start bit before reset
  libata debugging: Warn when unable to find timing descriptor based on xfer_mode
  sata_highbank: mark ahci_highbank_probe as __devinit
  pata_arasan: Initialize cf clock to 166MHz
  libata-acpi: Fix NULL ptr derference in ata_acpi_dev_handle
2012-11-18 08:26:35 -10:00
Clemens Ladisch
e99ddfde6a ALSA: ua101, usx2y: fix broken MIDI output
Commit 88a8516a21 (ALSA: usbaudio: implement USB autosuspend) added
autosuspend code to all files making up the snd-usb-audio driver.
However, midi.c is part of snd-usb-lib and is also used by other
drivers, not all of which support autosuspend.  Thus, calls to
usb_autopm_get_interface() could fail, and this unexpected error would
result in the MIDI output being completely unusable.

Make it work by ignoring the error that is expected with drivers that do
not support autosuspend.

Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com>
Reported-by: Devin Venable <venable.devin@gmail.com>
Reported-by: Dr Nick Bailey <nicholas.bailey@glasgow.ac.uk>
Reported-by: Jannis Achstetter <jannis_achstetter@web.de>
Reported-by: Rui Nuno Capela <rncbc@rncbc.org>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: 2.6.39+ <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2012-11-18 17:15:24 +01:00
Masanari Iida
064a7694b5 mtd: Fix typo mtd/tests
Correct spelling typo in printk within drivers/mtd/tests.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-18 16:03:37 +02:00
Huang Shijie
0730016465 mtd: de-select the chip when it is not used
When we scan several nand chips with nand_scan(), such as
     .......................
      nand_scan(*, 2);
     .......................

In nand_scan_ident(), the maxchips will become 2, so the current code
will select chip 1 to read the device ID. But the chip 0 is still
selected in this case.

To make the logic clear, we'd better de-select the chip when it is not used.

This patch de-select the nand chip if it is not used any more.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-18 16:02:31 +02:00
Emmanuel Grumbach
e1b69fdf33 iwlwifi: don't WARN when a non empty queue is disabled
This can happen when we shut down suddenly an interface.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-18 11:51:09 +01:00
Sachin Kamat
ded4c55d10 mtd: s3c2410: Fix potential NULL pointer dereference error
'set' is tested for NULL. But subsequently accessed without the check.
Thus making it conditional to avoid NULL pointer dereferencing.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-18 12:44:38 +02:00
Alexey Khoroshilov
2cbba75a56 jffs2: hold erase_completion_lock on exit
Users of jffs2_do_reserve_space() expect they still held
erase_completion_lock after call to it. But there is a path
where jffs2_do_reserve_space() leaves erase_completion_lock unlocked.
The patch fixes it.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-18 11:59:01 +02:00
Andreas Schwab
34fa78b59c m68k: fix sigset_t accessor functions
The sigaddset/sigdelset/sigismember functions that are implemented with
bitfield insn cannot allow the sigset argument to be placed in a data
register since the sigset is wider than 32 bits.  Remove the "d"
constraint from the asm statements.

The effect of the bug is that sending RT signals does not work, the signal
number is truncated modulo 32.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2012-11-18 10:32:16 +01:00
Dan Carpenter
379170a42c sound: oss/sb_audio: cap value in sb201_audio_set_speed()
We set "s" before we have capped "speed" so it could be the wrong value.
This could lead to a divide by zero bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-18 10:24:49 +01:00
Ingo Molnar
ec05a2311c Merge branch 'sched/urgent' into sched/core
Merge in fixes before we queue up dependent bits, to avoid conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-11-18 09:34:44 +01:00
Vlad Yasevich
75fe83c322 ipv6: Preserve ipv6 functionality needed by NET
Some pieces of network use core pieces of IPv6 stack.  Keep
them available while letting new GSO offload pieces depend
on CONFIG_INET.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 02:34:00 -05:00
Sony Chacko
6d973cb163 qlcnic: fix sparse warnings
qlcnic_hw.c:1337:17: warning: cast removes address space of expression
qlcnic_hw.c:1337:17: warning: incorrect type in argument 2 (different address spaces)
qlcnic_hw.c:1337:17:    expected void volatile [noderef] <asn:2>*addr
qlcnic_hw.c:1337:17:    got void *<noident>
qlcnic_hw.c:1337:17: warning: cast removes address space of expression
qlcnic_hw.c:1337:17: warning: incorrect type in argument 1 (different address spaces)
qlcnic_hw.c:1337:17:    expected void const volatile [noderef] <asn:2>*addr
qlcnic_hw.c:1337:17:    got void *<noident>

The above warnings are originating from the macros QLCNIC_RD_DUMP_REG and
QLCNIC_WR_DUMP_REG.
The warnings are fixed and macros are replaced with equivalent functions
in the only file from where it is called.

The following warnings are fixed by making the functions static.

qlcnic_hw.c:543:5: warning: symbol 'qlcnic_set_fw_loopback' was not declared. Should it be static?
qlcnic_init.c:1853:6: warning: symbol 'qlcnic_process_rcv_diag' was not declared. Should it be static?

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 02:32:16 -05:00
Sony Chacko
5ad6ff9d85 qlcnic: fix compiler warnings
Fix the following warnings:

qlcnic_main.c: In function 'qlcnic_update_cmd_producer':
qlcnic_main.c:119:51: warning: unused parameter 'adapter' [-Wunused-parameter]
qlcnic_main.c:119: warning: unused parameter adapter
qlcnic_init.c: In function qlcnic_process_lro
qlcnic_init.c:1586: warning: unused parameter sds_ring
qlcnic_init.c: In function qlcnic_process_rcv_diag
qlcnic_init.c:1854: warning: unused parameter sds_ring
qlcnic_init.c: In function qlcnic_fetch_mac
qlcnic_init.c:1938: warning: unused parameter adapter

warning: 'pci_using_dac' may be used uninitialized in this function [-Wmaybe-uninitialized]
qlcnic_main.c:1569:10: note: 'pci_using_dac' was declared here

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 02:32:16 -05:00
Kim, Milo
08d816b8cb lp8788-charger: Fix ADC channel names
The name of ADC channel is configurable in the platform side. This name is
referenced in the IIO consumer driver. To get the IIO channel, specific
name in the platform data is used as an parameter of the
iio_channel_get(). Thus, lp8788_adc_id platform data are replaced with
specific names.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-17 20:44:44 -08:00
Kim, Milo
340968de48 lp8788-charger: Fix wrong ADC conversion
To get the battery voltage and temperature, IIO ADC functions are used.
LP8788 ADC driver provides RAW and SCALE channel information. This patch
fixes wrong ADC result.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Reviewed-by Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-17 20:42:12 -08:00
Kim, Milo
968a47836c lp8788-charger: Use consumer device name on setting IIO channels
To get the ADC value for the battery voltage and temperature, LP8788 ADC
driver is used. LP8788 charger driver is the consumer of LP8788 ADC
driver. Thus, specific ADC driver name is required on getting the channel
using iio_channel_get().

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-17 20:40:59 -08:00
Ramakrishna Pallala
952aeeb3ee power_supply: Register power supply for thermal cooling device
This patch registers the power supply as a cooling device if the power
supply has support for charge throttling.

Now with this change low level drivers need not register with thermal
framework as it is automatically done by power supply framework.

Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-17 20:32:33 -08:00
Ramakrishna Pallala
ea2ce92e44 power_supply: Add support for CHARGE_CONTROL_* attributes
Add support for power supply attributes CHARGE_CONTROL_LIMIT
and CHARGE_CONTROL_LIMIT_MAX.

These new attributes will enable the user space to implement
custom charging algorithms based on platform state.

Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-17 20:21:43 -08:00
Daniel Borkmann
5082dfb716 PPC: net: bpf_jit_comp: add VLAN instructions for BPF JIT
This patch is a follow-up for patch "net: filter: add vlan tag access"
to support the new VLAN_TAG/VLAN_TAG_PRESENT accessors in BPF JIT.

Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Cc: Matt Evans <matt@ozlabs.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17 22:12:47 -05:00
Daniel Borkmann
02871903a1 PPC: net: bpf_jit_comp: add XOR instruction for BPF JIT
This patch is a follow-up for patch "filter: add XOR instruction for use
with X/K" that implements BPF PowerPC JIT parts for the BPF XOR operation.

Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Cc: Matt Evans <matt@ozlabs.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17 22:12:47 -05:00
Ben Hutchings
18d359ceb0 pch_gbe, ptp_pch: Fix the dependency direction between these drivers
In commit a24006ed12 ('ptp: Enable clock
drivers along with associated net/PHY drivers') I wrongly made
PTP_1588_CLOCK_PCH depend on PCH_GBE.  The dependency is really the
other way around.  Therefore make PCH_GBE select PTP_1588_CLOCK_PCH
and remove the 'default y' from the latter.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17 22:11:45 -05:00
Rami Rosen
e8e55d9514 vxlan: remove unused variable.
This patch removes addrexceeded member from vxlan_dev struct as it is unused.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17 22:02:19 -05:00
Akinobu Mita
fc184f0892 sctp: use bitmap_weight
Use bitmap_weight to count the total number of bits set in bitmap.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Cc: linux-sctp@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17 22:01:18 -05:00
David S. Miller
67f4efdce7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor line offset auto-merges.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17 22:00:43 -05:00
Maxime Bizon
b042e47491 pstore/ram: Fix undefined usage of rounddown_pow_of_two(0)
record_size / console_size / ftrace_size can be 0 (this is how you disable
the feature), but rounddown_pow_of_two(0) is undefined. As suggested by
Kees Cook, use !is_power_of_2() as a condition to call
rounddown_pow_of_two and avoid its undefined behavior on the value 0. This
issue has been present since commit 1894a253 (ramoops: Move to
fs/pstore/ram.c).

Cc: stable@vger.kernel.org
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-17 17:40:57 -08:00