[ Upstream commit 247e84f66a ]
All Rockchip GMAC variants typically write to GRF regs to control e.g.
interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3576 and
RK3588 use a mix of GRF and peripheral GRF regs. These syscon regmaps is
located with help of a rockchip,grf and rockchip,php-grf phandle.
However, validating the rockchip,grf and rockchip,php-grf syscon regmap
is deferred until e.g. interface mode or speed is configured, inside the
individual SoC specific operations.
Change to validate the rockchip,grf and rockchip,php-grf syscon regmap
at probe time to simplify all SoC specific operations.
This should not introduce any backward compatibility issues as all
GMAC nodes have been added together with a rockchip,grf phandle (and
rockchip,php-grf where required) in their initial commit.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250308213720.2517944-3-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2389c6efd3 ]
Frederic pointed out that the memory operations to initialize the timer are
not guaranteed to be visible, when __lock_timer() observes timer::it_signal
valid under timer::it_lock:
T0 T1
--------- -----------
do_timer_create()
// A
new_timer->.... = ....
spin_lock(current->sighand)
// B
WRITE_ONCE(new_timer->it_signal, current->signal)
spin_unlock(current->sighand)
sys_timer_*()
t = __lock_timer()
spin_lock(&timr->it_lock)
// observes B
if (timr->it_signal == current->signal)
return timr;
if (!t)
return;
// Is not guaranteed to observe A
Protect the write of timer::it_signal, which makes the timer valid, with
timer::it_lock as well. This guarantees that T1 must observe the
initialization A completely, when it observes the valid signal pointer
under timer::it_lock. sighand::siglock must still be taken to protect the
signal::posix_timers list.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20250308155623.507944489@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f2909c6cd ]
With a large number of POSIX timers the search for a valid ID might cause a
soft lockup on PREEMPT_NONE/VOLUNTARY kernels.
Add cond_resched() to the loop to prevent that.
[ tglx: Split out from Eric's series ]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20250214135911.2037402-2-edumazet@google.com
Link: https://lore.kernel.org/all/20250308155623.635612865@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81f8f7454a ]
Currently, the IB uverbs API calls uobj_get_uobj_read(), which in turn
uses the rdma_lookup_get_uobject() helper to retrieve user objects.
In case of failure, uobj_get_uobj_read() returns NULL, overriding the
error code from rdma_lookup_get_uobject(). The IB uverbs API then
translates this NULL to -EINVAL, masking the actual error and
complicating debugging. For example, applications calling ibv_modify_qp
that fails with EBUSY when retrieving the QP uobject will see the
overridden error code EINVAL instead, masking the actual error.
Furthermore, based on rdma-core commit:
"2a22f1ced5f3 ("Merge pull request #1568 from jakemoroni/master")"
Kernel's IB uverbs return values are either ignored and passed on as is
to application or overridden with other errnos in a few cases.
Thus, to improve error reporting and debuggability, propagate the
original error from rdma_lookup_get_uobject() instead of replacing it
with EINVAL.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/64f9d3711b183984e939962c2f83383904f97dfb.1740577869.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e856f93e0f ]
When dioread_nolock is turned on (the default), it will convert unwritten
extents to written at ext4_end_io_end(), even if the data writeback fails.
It leads to the possibility that stale data may be exposed when the
physical block corresponding to the file data is read-only (i.e., writes
return -EIO, but reads are normal).
Therefore a new ext4_io_end->flags EXT4_IO_END_FAILED is added, which
indicates that some bio write-back failed in the current ext4_io_end.
When this flag is set, the unwritten to written conversion is no longer
performed. Users can read the data normally until the caches are dropped,
after that, the failed extents can only be read to all 0.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122110533.4116662-3-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26343ca0df ]
data_err=abort aborts the journal on I/O errors. However, this option is
meaningless if journal is disabled, so it is rejected in nojournal mode
to reduce unnecessary checks. Also, this option is ignored upon remount.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250122110533.4116662-4-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdbbc480f4 ]
On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add support for the resets in the clock driver to enable the Audio SW
driver to assert/deassert the audio resets as needed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-2-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a149377c03 ]
Add support for GPIO headphone detection with the hp-det-gpios
property. In order for this to properly disable the path upon
removal of headphones, the output must be labelled Headphone which
is a common sink in the driver.
Describe a headphone jack and detection GPIO in the driver, check for
a corresponding device tree node, and enable jack detection in a new
machine init function if described.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate DAPM changes into separate patch and add rationale.
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-4-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19478f2011 ]
There have been multiple fixes to the video caps that are missing for
SRIOV. Update the SRIOV caps with correct values.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e27b36ea6b ]
Just use the default values. There's not need to
get the value from hardware and it could cause problems
if we do that at runtime and gfxoff is active.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc3c139cf0 ]
Just use the default values. There's not need to
get the value from hardware and it could cause problems
if we do that at runtime and gfxoff is active.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76b58d5111 ]
The chipid macro/variable and regmap_read function call is not needed
because the TPS65219_REG_TI_DEV_ID register value is not a consistent value
across TPS65219 PMIC config versions. Reading from the DEV_ID register
without a consistent value to compare it to isn't useful. There isn't a
way to verify the match data ID is the same ID read from the DEV_ID device
register. 0xF0 isn't a DEV_ID value consistent across TPS65219 NVM
configurations.
For TPS65215, there is a consistent value in bits 5-0 of the DEV_ID
register. However, there are other error checks in place within probe()
that apply to both PMICs rather than keeping this isolated check for one
PMIC.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-4-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c12bfa0fee ]
Each pin can be configured as a Special Function IO (SFIO) or GPIO,
where the SFIO enables the pin to operate in alternative modes such as
I2C, SPI, etc.
The current implementation sets all the pins back to SFIO mode
even if they were initially in GPIO mode. This can cause glitches
on the pins when pinctrl_gpio_free() is called.
Avoid these undesired glitches by storing the pin's SFIO/GPIO
state on GPIO request and restoring it on GPIO free.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/20250305104939.15168-2-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2356f15cae ]
On XenServer on Windows machine a platform device with ID 2 instead of
1 is used.
This device is mainly identical to device 1 but due to some Windows
update behaviour it was decided to use a device with a different ID.
This causes compatibility issues with Linux which expects, if Xen
is detected, to find a Xen platform device (5853:0001) otherwise code
will crash due to some missing initialization (specifically grant
tables). Specifically from dmesg
RIP: 0010:gnttab_expand+0x29/0x210
Code: 90 0f 1f 44 00 00 55 31 d2 48 89 e5 41 57 41 56 41 55 41 89 fd
41 54 53 48 83 ec 10 48 8b 05 7e 9a 49 02 44 8b 35 a7 9a 49 02
<8b> 48 04 8d 44 39 ff f7 f1 45 8d 24 06 89 c3 e8 43 fe ff ff
44 39
RSP: 0000:ffffba34c01fbc88 EFLAGS: 00010086
...
The device 2 is presented by Xapi adding device specification to
Qemu command line.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250227145016.25350-1-frediano.ziglio@cloud.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc6c67ec2 ]
When using smc_pnet in SMC, it will only search the pnetid in the
base_ndev of the netdev hierarchy(both HW PNETID and User-defined
sw pnetid). This may not work for some scenarios when using SMC in
container on cloud environment.
In container, there have choices of different container network,
such as directly using host network, virtual network IPVLAN, veth,
etc. Different choices of container network have different netdev
hierarchy. Examples of netdev hierarchy show below. (eth0 and eth1
in host below is the netdev directly related to the physical device).
_______________________________
| _________________ |
| |POD | |
| | | |
| | eth0_________ | |
| |____| |__| |
| | | |
| | | |
| eth1|base_ndev| eth0_______ |
| | | | RDMA ||
| host |_________| |_______||
---------------------------------
netdev hierarchy if directly using host network
________________________________
| _________________ |
| |POD __________ | |
| | |upper_ndev| | |
| |eth0|__________| | |
| |_______|_________| |
| |lower netdev |
| __|______ |
| eth1| | eth0_______ |
| |base_ndev| | RDMA ||
| host |_________| |_______||
---------------------------------
netdev hierarchy if using IPVLAN
_______________________________
| _____________________ |
| |POD _________ | |
| | |base_ndev|| |
| |eth0(veth)|_________|| |
| |____________|________| |
| |pairs |
| _______|_ |
| | | eth0_______ |
| veth|base_ndev| | RDMA ||
| |_________| |_______||
| _________ |
| eth1|base_ndev| |
| host |_________| |
---------------------------------
netdev hierarchy if using veth
Due to some reasons, the eth1 in host is not RDMA attached netdevice,
pnetid is needed to map the eth1(in host) with RDMA device so that POD
can do SMC-R. Because the eth1(in host) is managed by CNI plugin(such
as Terway, network management plugin in container environment), and in
cloud environment the eth(in host) can dynamically be inserted by CNI
when POD create and dynamically be removed by CNI when POD destroy and
no POD related to the eth(in host) anymore. It is hard to config the
pnetid to the eth1(in host). But it is easy to config the pnetid to the
netdevice which can be seen in POD. When do SMC-R, both the container
directly using host network and the container using veth network can
successfully match the RDMA device, because the configured pnetid netdev
is a base_ndev. But the container using IPVLAN can not successfully
match the RDMA device and 0x03030000 fallback happens, because the
configured pnetid netdev is not a base_ndev. Additionally, if config
pnetid to the eth1(in host) also can not work for matching RDMA device
when using veth network and doing SMC-R in POD.
To resolve the problems list above, this patch extends to search user
-defined sw pnetid in the clc handshake ndev when no pnetid can be found
in the base_ndev, and the base_ndev take precedence over ndev for backward
compatibility. This patch also can unify the pnetid setup of different
network choices list above in container(Config user-defined sw pnetid in
the netdevice can be seen in POD).
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fc728515 ]
The devices with size >= 2^63 bytes can't be used reliably by userspace
because the type off_t is a signed 64-bit integer.
Therefore, we limit the maximum size of a device mapper device to
2^63-512 bytes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64b7871522 ]
This patch addresses an issue where authentication failures were being
erroneously reported due to negative test failures in the "ccm(aes)"
selftest.
pr_debug suppress unnecessary screaming of these tests.
Signed-off-by: Shashank Gupta <shashankg@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 226ac19c21 ]
When conf_read_simple() is called with S_DEF_AUTO, it is meant to read
previous symbol values from include/config/auto.conf to determine which
include/config/* files should be touched.
This process should not modify the current symbol status in any way.
However, conf_touch_deps() currently invalidates all symbol values and
recalculates them, which is totally unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f757f6011c ]
The script previously assumed --file was always the first argument,
which caused issues when it appeared later. This patch updates the
parsing logic to scan all arguments to find --file, sets the config
file correctly, and resets the argument list with the remaining
commands.
It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN
to make oldconfig.
Signed-off-by: Seyediman Seyedarab <imandevel@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b82b181a2 ]
Currently for bpf progs in a cgroup hierarchy, the effective prog array
is computed from bottom cgroup to upper cgroups (post-ordering). For
example, the following cgroup hierarchy
root cgroup: p1, p2
subcgroup: p3, p4
have BPF_F_ALLOW_MULTI for both cgroup levels.
The effective cgroup array ordering looks like
p3 p4 p1 p2
and at run time, progs will execute based on that order.
But in some cases, it is desirable to have root prog executes earlier than
children progs (pre-ordering). For example,
- prog p1 intends to collect original pkt dest addresses.
- prog p3 will modify original pkt dest addresses to a proxy address for
security reason.
The end result is that prog p1 gets proxy address which is not what it
wants. Putting p1 to every child cgroup is not desirable either as it
will duplicate itself in many child cgroups. And this is exactly a use case
we are encountering in Meta.
To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag
is specified at attachment time, the prog has higher priority and the
ordering with that flag will be from top to bottom (pre-ordering).
For example, in the above example,
root cgroup: p1, p2
subcgroup: p3, p4
Let us say p2 and p4 are marked with BPF_F_PREORDER. The final
effective array ordering will be
p2 p4 p3 p1
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0116a7d84b ]
Add a stub for mt6359_accdet_enable_jack_detect() to prevent linker
failures in the machine sound drivers calling it when
CONFIG_SND_SOC_MT6359_ACCDET is not enabled.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-3-7828e835ff4b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17fdf318f5 ]
The current code for the IRQ in pcm6240 makes no sense:
it looks up an IRQ with of_irq_get(), treat it as a GPIO
by issuing gpio_request(), gpio_direction_input()
and gpio_to_irq() on it.
This is just wrong, if the device tree assigns the IRQ
from a GPIO number this is just incorrect: it is clearly
stated that GPIO providers and IRQ providers are
orthogonal.
It is possible to look up an IRQ to a corresponding GPIO
line but this is taking an IRQ and pretending it's a
GPIO, which is just semantically wrong.
Drop the offending code and treat the IRQ that we get
from the device tree as any other IRQ, see for example
other codec drivers.
The DT bindings for this codec does not have any in-tree
DTS files, which may explain why things are weird.
As a bonus, this moves the driver away from the legacy
<linux/gpio.h> include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250312-pcm-codecs-v1-3-41ffc4f8fc5c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a5fc30841 ]
The return value of spi_setup() is not captured within
spi_mux_select() and it is assumed to be always success.
CID: 1638374
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Link: https://patch.msgid.link/20250316054651.13242-1-sperezglz@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe1e57d44d ]
- Rename erofs_init_managed_cache() to z_erofs_init_super();
- Move the initialization of managed_pslots into z_erofs_init_super() too;
- Move z_erofs_init_super() and packed inode preparation upwards, before
the root inode initialization.
Therefore, the root directory can also be compressible.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250317054840.3483000-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad79c278e4 ]
This is only used to write a new NVM in order to upgrade the retimer
firmware. It does not make sense to expose it if upgrade is disabled.
This also makes it consistent with the router NVM upgrade.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 149dfb3161 ]
- Move tcp_count_delivered() earlier and split tcp_count_delivered_ce()
out of it
- Move tcp_in_ack_event() later
- While at it, remove the inline from tcp_in_ack_event() and let
the compiler to decide
Accurate ECN's heuristics does not know if there is going
to be ACE field based CE counter increase or not until after
rtx queue has been processed. Only then the number of ACKed
bytes/pkts is available. As CE or not affects presence of
FLAG_ECE, that information for tcp_in_ack_event is not yet
available in the old location of the call to tcp_in_ack_event().
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a662f3c03b ]
If a journal is wiped, we will set journal->j_tail to 0. However if
'write' argument is not set (as it happens for read-only device or for
ocfs2), the on-disk superblock is not updated accordingly and thus
jbd2_journal_recover() cat try to recover the wiped journal. Fix the
check in jbd2_journal_recover() to use journal->j_tail for checking
empty journal instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250206094657.20865-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f4a489b37 ]
The msg_res region translates writes into PCIe Message TLPs. Previously we
mapped this region using atu.cpu_addr, the input address programmed into
the ATU.
"cpu_addr" is a misnomer because when a bus fabric translates addresses
between the CPU and the ATU, the ATU input address is different from the
CPU address. A future patch will rename "cpu_addr" and correct the value
to be the ATU input address instead of the CPU physical address.
Map the msg_res region before writing to it using the msg_res resource
start, a CPU physical address.
Link: https://lore.kernel.org/r/20250315201548.858189-2-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 860be250fc ]
Some systems report INTx as not routed by setting pdev->irq to
IRQ_NOTCONNECTED, resulting in a -ENOTCONN error when trying to
setup eventfd signaling. Include this in the set of conditions
for which the PIN register is virtualized to zero.
Additionally consolidate vfio_pci_get_irq_count() to use this
virtualized value in reporting INTx support via ioctl and sanity
checking ioctl paths since pdev->irq is re-used when the device
is in MSI mode.
The combination of these results in both the config space of the
device and the ioctl interface behaving as if the device does not
support INTx.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250311230623.1264283-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad77cebf97 ]
The SCSI ERASE command erases from the current position onwards. Don't
clear the position variables.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-3-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8db816c6f1 ]
In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did
not correctly implement it. The st driver first tries MODE SELECT with the
page format bit set to set the block descriptor. If not successful, the
non-page format is tried.
The test only tests the sense code and this triggers also from illegal
parameter in the parameter list. The test is limited to "old" devices and
made more strict to remove false alarms.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-4-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b419c889c ]
capable() calls refer to enabled LSMs whether to permit or deny the
request. This is relevant in connection with SELinux, where a
capability check results in a policy decision and by default a denial
message on insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an
unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore
those denial messages, hiding future syscalls, where the task
performs an actual privileged operation, leading to hidden limited
functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to permit
the task the requested capability, while it does not need it,
violating the principle of least privilege.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250302160657.127253-2-cgoettsche@seltendoof.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9be2b9b60 ]
This is required to allow the IOMMU driver to correctly flush its own
TLB.
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20250113142424.30487-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c81e32ae ]
Newer FW can set the CAPS_CHANGE flag during ifup if some capabilities
or configurations have changed. For example, the CoS queue
configurations may have changed. Support this new flag by treating it
almost like FW reset. The driver will essentially rediscover all
features and capabilities, reconfigure all backing store context memory,
reset everything to default, and reserve all resources.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: shantiprasad shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-5-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fcfcbe457 ]
This patch addresses an issue where, despite the AP supporting 40MHz
bandwidth, the connection was limited to 20MHz. Without this fix,
even if the access point supports 40MHz, the bandwidth after
connection remains at 20MHz. This issue is not a regression.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250314094238.2097341-1-jeff.chen_1@nxp.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e82cf3051e ]
When uml_reserved is updated, min_low_pfn must also be updated
accordingly. Otherwise, min_low_pfn will not accurately reflect
the lowest available PFN.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250221041855.1156109-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cef721e0d5 ]
Doing this allows using registers as retrieved from an mcontext to be
pushed to a process using PTRACE_SETREGS.
It is not entirely clear to me why CSGSFS was masked. Doing so creates
issues when using the mcontext as process state in seccomp and simply
copying the register appears to work perfectly fine for ptrace.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://patch.msgid.link/20250224181827.647129-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03d2b62208 ]
This patch bypasses multi-link errors in TCP mode, allowing dlm
to operate on the first tcp link.
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9291ea091b ]
An mm has pgstes only after s390_enable_sie() has been called, while
mm_alloc_pgste() may be always true (e.g. via sysctl setting).
Limit the calls to gmap_unlink() in pte_free_tlb() to those cases
where there might be something to unlink.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0430bf9bc1 ]
The controller driver nacked the master request but didn't emit a
STOP to end the transaction. The driver shall refuse the unsupported
requests and return the controller state to IDLE by emitting a STOP.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250318053606.3087121-4-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00e5c2238 ]
Move to probe so we can check the PCI device type and
only apply the drm_firmware_drivers_only() check for
PCI DISPLAY classes. Also add a module parameter to
override the nomodeset kernel parameter as a workaround
for platforms that have this hardcoded on their kernel
command lines.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c2f4ae64b ]
[WHY]
We should never apply a minimum dispclk value while in
prepare_bandwidth or while displays are active. This is
always an optimizaiton for when all displays are disabled.
[HOW]
Defer dispclk optimization until safe_to_lower = true
and display_count reaches 0.
Since 0 has a special value in this logic (ie. no dispclk
required) we also need adjust the logic that clamps it for
the actual request to PMFW.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Eric Yang <eric.yang@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1a0202c6b ]
This patch improve the returned error code of blkcg_policy_register().
1. Move the validation check for cpd/pd_alloc_fn and cpd/pd_free_fn
function pairs to the start of blkcg_policy_register(). This ensures
we immediately return -EINVAL if the function pairs are not correctly
provided, rather than returning -ENOSPC after locking and unlocking
mutexes unnecessarily.
Those locks should not contention any problems, as error of policy
registration is a super cold path.
2. Return -ENOMEM when cpd_alloc_fn() failed.
Co-authored-by: Wen Tao <wentao@uniontech.com>
Signed-off-by: Wen Tao <wentao@uniontech.com>
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/3E333A73B6B6DFC0+20250317022924.150907-1-chenlinxuan@uniontech.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a77749b3e2 ]
When attempting to build a too long path we are currently returning
-ENOMEM, which is very odd and misleading. So update fs_path_ensure_buf()
to return -ENAMETOOLONG instead. Also, while at it, move the WARN_ON()
into the if statement's expression, as it makes it clear what is being
tested and also has the effect of adding 'unlikely' to the statement,
which allows the compiler to generate better code as this condition is
never expected to happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>