Charlie Jenkins <charlie@rivosinc.com> says:
There have been a couple of reports that using the hint address to
restrict the address returned by mmap hint address has caused issues in
applications. A different solution for restricting addresses returned by
mmap is necessary to avoid breakages.
[Palmer: This also just wasn't doing the right thing in the first place,
as it didn't handle the sv39 cases we were trying to deal with.]
* b4-shazam-merge:
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-0-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Christian Brauner <brauner@kernel.org> says:
When a kmem cache is created with SLAB_TYPESAFE_BY_RCU the free pointer
must be located outside of the object because we don't know what part of
the memory can safely be overwritten as it may be needed to prevent
object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up adding a
new cacheline. This is the case for e.g., struct file. After having it
shrunk down by 40 bytes and having it fit in three cachelines we still
have SLAB_TYPESAFE_BY_RCU adding a fourth cacheline because it needs to
accommodate the free pointer.
Add a new kmem_cache_create_rcu() function that allows the caller to
specify an offset where the free pointer is supposed to be placed.
Before this series cat /proc/slabinfo:
filp 1198 1248 256 32 2 : tunables 0 0 0 : slabdata 39 39 0
^^^
After this series cat /proc/slabinfo:
filp 1323 1323 192 21 1 : tunables 0 0 0 : slabdata 63 63 0
^^^
* patches from https://lore.kernel.org/r/20240828-work-kmem_cache-rcu-v3-0-5460bc1f09f6@kernel.org:
fs: use kmem_cache_create_rcu()
mm: add kmem_cache_create_rcu()
mm: remove unused root_cache argument
Link: https://lore.kernel.org/r/20240828-work-kmem_cache-rcu-v3-0-5460bc1f09f6@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Switch to the new kmem_cache_create_rcu() helper which allows us to use
a custom free pointer offset avoiding the need to have an external free
pointer which would grow struct file behind our backs.
Link: https://lore.kernel.org/r/20240828-work-kmem_cache-rcu-v3-3-5460bc1f09f6@kernel.org
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When a kmem cache is created with SLAB_TYPESAFE_BY_RCU the free pointer
must be located outside of the object because we don't know what part of
the memory can safely be overwritten as it may be needed to prevent
object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up adding a
new cacheline. This is the case for e.g., struct file. After having it
shrunk down by 40 bytes and having it fit in three cachelines we still
have SLAB_TYPESAFE_BY_RCU adding a fourth cacheline because it needs to
accommodate the free pointer.
Add a new kmem_cache_create_rcu() function that allows the caller to
specify an offset where the free pointer is supposed to be placed.
Link: https://lore.kernel.org/r/20240828-work-kmem_cache-rcu-v3-2-5460bc1f09f6@kernel.org
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Previous commits cleaning up kerneldoc used the term "negative error
number" to refer to error condition return values. Update remaining
instances of other terminology such as "error code" or "errno" as
well so the whole regulator subsystem is unified.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-11-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
of_regulator_bulk_get_all() has a comment section that pretty much
resembles a kerneldoc block, except that the block begins with "/*"
instead of "/**".
Fix that and also rework the "Return" section and the error code
terminology so that it is the same as the other kerneldoc blocks
in the same file.
Fixes: 27b9ecc7a9 ("regulator: Add of_regulator_bulk_get_all")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-10-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for the function
regulator_irq_map_event_simple().
Add a "Return" section for it based on its behavior. The function
actually always returns 0, but fills in fields in its @rid parameter as
needed. Expand the description of the parameter to cover this.
While at it fix a typo found in the description of the same function.
Reported-by: Matti Vaittinen <mazziesaccount@gmail.com>
Closes: https://lore.kernel.org/all/e341240e-1c1f-49a2-91cd-440888fdbda0@gmail.com/
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-9-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for the function
regulator_register_always_on().
Add a "Return" section for it based on its behavior.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-8-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for kerneldoc of
of_get_fixed_voltage_config(). The kerneldoc has a description
about the return values, just not in the format kernel-doc wants.
Convert it to use the proper "Return:" section header. The existing
description have been reworded and moved around to fit the grammar and
formatting.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for many documented
functions in the regulator OF-specific code. These all have descriptions
about the return values, just not in the format kernel-doc wants.
Convert these to use the proper "Return:" section header. The existing
descriptions have been reworded and moved around to fit the grammar and
formatting.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we shrunk struct file to 192 bytes aka 3 cachelines reorder
struct file to not leave any holes or have members cross cachelines.
Add a short comment to each of the fields and mark the cachelines.
It's possible that we may have to tweak this based on profiling in the
future. So far I had Jens test this comparing io_uring with non-fixed
and fixed files and it improved performance. The layout is a combination
of Jens' and my changes.
Link: https: //lore.kernel.org/r/20240824-peinigen-hocken-7384b977c643@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
kernel-doc complains about missing "Return" section for many documented
functions in the regulator core. Some with free-form return value
descriptions have been fixed in the previous patch. The remaining are
completely missing any mention of return values.
Add "Return" sections to these kerneldoc blocks with basic descriptions.
In a few cases where the functions don't call even more functions and
the error numbers are known, those are documented in detail.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains about missing "Return" section for many documented
functions in the regulator core. Many of them actually have descriptions
about the return values, just not in the format kernel-doc wants.
Convert these to use the proper "Return:" section header. The existing
descriptions have been reworded and moved around to fit the grammar and
formatting.
In a few cases where the functions don't call even more functions
and the error numbers are known, those are documented in detail.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The kerneldoc for regulator_is_supported_voltage() states that the
return value is a boolean. That is not correct, as it could return an
error number if the check failed.
Fix the description by expanding it to cover the valid return values and
error conditions. The description is also converted to a proper "Return"
section.
Fixes: c5f3939b8f ("regulator: core: Support fixed voltages in regulator_is_supported_voltage()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
kernel-doc complains that _regulator_check_status_enabled() is missing a
short description.
Since the current description is already quite short, just trim it a bit
more and use it as the short description.
Fixes: f7d7ad42a9 ("regulator: Allow regulators to verify enabled during enable()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240829085131.1361701-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MSI Bravo 17 (D7VEK), like other laptops from the family,
has broken ACPI tables and needs a quirk for internal mic
to work.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://patch.msgid.link/20240829130313.338508-1-markuss.broks@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mmap behavior that restricts the addresses returned by mmap caused
unexpected behavior, so get rid of the test cases that check that
behavior.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: 73d05262a2 ("selftests: riscv: Generalize mm selftests")
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-2-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
FriendlyELEC NanoPC-T6 has optional SPI flash chip on-board.
It is populated with 32MB one on LTS version.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-5-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In the LTS (2310) version the miniPCIe slot got removed and USB 2.0
setup has changed. There are two external accessible ports and two ports
on the internal header.
There is an on-board USB hub which provides:
- one external connector (bottom one)
- two internal ports on pin header
- one port for m.2 E connector
The top USB 2.0 connector comes directly from the SoC.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-4-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to Section 5.2.10 of ACPI Specification, FACS is optional
in reduced hardware model. Enable the detection for "Hardware-reduced
ACPI support only" build (CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y) also.
Link: ee53ed6b54
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Link: https://patch.msgid.link/20240827025821.2099068-2-jiaqing.zhao@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
FriendlyELEC introduced a second version of NanoPC-T6 SBC.
Create common include file and make NanoPC-T6 use it. Following
patches will add LTS version.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-2-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
for_each_child_of_node can help to iterate through the device_node,
and we don't need to use while loop. No functional change with this
conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822085430.25753-3-zhangzekun11@huawei.com
for_each_child_of_node() can help to iterate through the device_node,
and we don't need to do it manually. No functional change with this
conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822085430.25753-2-zhangzekun11@huawei.com
Convert the Cirrus Logic CS4271 audio CODEC bindings to DT schema.
Add missing spi-cpha, spi-cpol, '#sound-dai-cells' and port, as they
are already being used in the DTS and the driver for this device.
Switch to 'reset-gpios' and drop legacy 'reset-gpio' used in original
bindings.
Based on Animesh Agarwal cs42xx8 conversion patch.
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/all/20240715-ep93xx-v11-0-4e924efda795@maquefel.me
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240829-cs4271-yaml-v3-1-f1624cc838f6@maquefel.me
Signed-off-by: Mark Brown <broonie@kernel.org>
The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.
Add the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240828180057.3167190-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the AXP717 PMIC to utilize the ADC (for reading
voltage, current, and temperature information from the PMIC) as well
as the USB charger and battery.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240821215456.962564-12-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
When the original file is guaranteed to contain the minmax.h header file
and compile correctly, using the real macro is usually
more intuitive and readable.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://patch.msgid.link/20240827131203.3918516-1-yanzhen@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.
Add the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240829113158.3324928-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.
Add an entry for the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240829113158.3324928-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Increase the reference count by calling pci_get_slot(), and remember to
decrement the reference count by calling pci_dev_put().
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Link: https://patch.msgid.link/20240829033511.1917015-1-11162571@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RK3588 VO0 and VO1 GRFs are not identical (though quite similar in terms
of layout) and, therefore, incorrectly shared the compatible string.
Since the related binding document has been updated to use dedicated
strings, update the compatibles for vo{0,1}_grf DT nodes accordingly.
Additionally, for consistency, set the full region size (16KB) for
VO1_GRF.
Reported-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240828-rk3588-vo-grf-compat-v2-2-4db2f791593f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to RK3588 TRM, VO0_GRF and VO1_GRF have a similar layout, but
definitely not an identical one, therefore sharing the compatible is not
really justified.
Since currently there is no user of this, hence no ABI break, let's fix
it by providing dedicated compatibles while deprecating the old one.
Reported-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240828-rk3588-vo-grf-compat-v2-1-4db2f791593f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In order to better handle the necessary DSB DEwake tricks let's
switch over to using a chained DSB for the actual LUT programming.
The CPU will start 'dsb_color_commit', which in turn will start the
chained 'dsb_color_vblank'.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-15-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
We'll soon utilize several DSBs during the commit. To that end
rename the current crtc_state->dsb to crtc_state->dsb_color_vblank
to better reflect its role (color managemnent stuff programmed during
vblank).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-14-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
In order to avoid the DSB keeping the DEwake permanently
asserted we must clear DSB_PMCTRL_2.DSB_FORCE_DEWAKE once
we are done. For good measure do the same for
DSB_PMCTRL.DSB_ENABLE_DEWAKE.
Experimentally this doens't seem to be actually necessary
(unlike with DSB_FORCE_DEWAKE). That is, the DSB_ENABLE_DEWAKE
doesn't seem to do anything whenever the DSB is not active.
But I'd hate to waste a ton of power in case there I'm wrong
and there is some way DEwake could remaing asserted. One extra
register write is a small price to pay for some peace of mind.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-13-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Allow intel_dsb_chain() to start the chained DSB
at start of the undelaye vblank. This is slightly
more involved than simply setting the bit as we
must use the DEwake mechanism to eliminate pkgC
latency.
And DSB_ENABLE_DEWAKE itself is problematic in that
it allows us to configure just a single scanline,
and if the current scanline is already past that
DSB_ENABLE_DEWAKE won't do anything, rendering the
whole thing moot.
The current workaround involves checking the pipe's current
scanline with the CPU, and if it looks like we're about to
miss the configured DEwake scanline we set DSB_FORCE_DEWAKE
to immediately assert DEwake. This is somewhat racy since the
hardware is making progress all the while we're checking it on
the CPU.
We can make things less racy by chaining two DSBs and handling
the DSB_FORCE_DEWAKE stuff entirely without CPU involvement:
1. CPU starts the first DSB immediately
2. First DSB configures the second DSB, including its dewake_scanline
3. First DSB starts the second w/ DSB_WAIT_FOR_VBLANK
4. First DSB asserts DSB_FORCE_DEWAKE
5. First DSB waits until we're outside the dewake_scanline-vblank_start
window
6. First DSB deasserts DSB_FORCE_DEWAKE
That will guarantee that the we are fully awake when the second
DSB starts to actually execute.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-12-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
In order to handle the DEwake tricks without involving
the CPU we need a mechanism by which one DSB can start
another one. Add a basic function to do so. We'll extend
it later with additional code to actually deal with
DEwake.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-11-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
