Some fields aren't well positioned or with an incorrect size inside the
hardware registers. Fix them.
This doesn't impact the Fluster score.
Fixes: 727a400686 ("media: verisilicon: Add Rockchip AV1 decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use v4l2_av1_tile_info->tile_cols to get the number of columns
in the frame and make auxiliary buffer memory size computation
more accurate.
Fixes: 727a400686 ("media: verisilicon: Add Rockchip AV1 decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The RK3588 post-processor block is able to convert 10-bit pixel-formats
into 8-bit pixel-formats.
Fixes: 003afda97c ("media: verisilicon: Enable AV1 decoder on rk3588")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the width and height are 0xffff (or close), the result of a
multiplication will overflow.
Cast to a larger type to avoid undefined behavior.
Such values are possible in CODA7, but unlikely.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 918c66fd41 ("[media] coda: add CODA7541 decoding support")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Vicodec will ignore en/decoder commands if the CAPTURE queue is not
streaming. But this prevents CMD_STOP from being used during a dynamic
resolution change to mark the last source buffer. Since CMD_STOP is
ignored, but doesn’t fail, there is no warning that the command needs to
be resent, and CAPTURE will continue to attempt to dequeue buffers
waiting, futilely, for one with V4L2_BUF_FLAG_LAST.
Fix this problem by carrying out en/decoder commands even if CAPTURE is
not streaming.
Fixes: d17589afa9 vicodec: improve handling of ENC_CMD_STOP/START
Reported by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
- rhashtable conversion for vfs inodes
- rcu_pending, btree key cache conversion
+ nocow deadlock fix
+ fix for new rebalance_work accounting
-----BEGIN PGP SIGNATURE-----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=ejxu
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-24' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- assorted syzbot fixes
- some upgrade fixes for old (pre 1.0) filesystems
- fix for moving data off a device that was switched to durability=0
after data had been written to it.
- nocow deadlock fix
- fix for new rebalance_work accounting
* tag 'bcachefs-2024-08-24' of git://evilpiepirate.org/bcachefs: (28 commits)
bcachefs: Fix rebalance_work accounting
bcachefs: Fix failure to flush moves before sleeping in copygc
bcachefs: don't use rht_bucket() in btree_key_cache_scan()
bcachefs: add missing inode_walker_exit()
bcachefs: clear path->should_be_locked in bch2_btree_key_cache_drop()
bcachefs: Fix double assignment in check_dirent_to_subvol()
bcachefs: Fix refcounting in discard path
bcachefs: Fix compat issue with old alloc_v4 keys
bcachefs: Fix warning in bch2_fs_journal_stop()
fs/super.c: improve get_tree() error message
bcachefs: Fix missing validation in bch2_sb_journal_v2_validate()
bcachefs: Fix replay_now_at() assert
bcachefs: Fix locking in bch2_ioc_setlabel()
bcachefs: fix failure to relock in btree_node_fill()
bcachefs: fix failure to relock in bch2_btree_node_mem_alloc()
bcachefs: unlock_long() before resort in journal replay
bcachefs: fix missing bch2_err_str()
bcachefs: fix time_stats_to_text()
bcachefs: Fix bch2_bucket_gens_init()
bcachefs: Fix bch2_trigger_alloc assert
...
-----BEGIN PGP SIGNATURE-----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=bGOb
-----END PGP SIGNATURE-----
Merge tag '6.11-rc5-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- query directory flex array fix
- fix potential null ptr reference in open
- fix error message in some open cases
- two minor cleanups
* tag '6.11-rc5-server-fixes' of git://git.samba.org/ksmbd:
smb/server: update misguided comment of smb2_allocate_rsp_buf()
smb/server: remove useless assignment of 'file_present' in smb2_open()
smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()
smb/server: fix return value of smb2_open()
ksmbd: the buffer of smb2 query dir response has at least 1 byte
- Fix KASLR base offset to account for symbol offsets in the vmlinux
ELF file, preventing tool breakages like the drgn debugger
- Fix potential memory corruption of physmem_info during kernel physical
address randomization
- Fix potential memory corruption due to overlap between the relocated
lowcore and identity mapping by correctly reserving lowcore memory
- Fix performance regression and avoid randomizing identity mapping base
by default
- Fix unnecessary delay of AP bus binding complete uevent to prevent
startup lag in KVM guests using AP
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmbJDQYACgkQjYWKoQLX
FBgTdwf9FNkHvLFhf5JbqlIERrjI9Ax8lQwCrAAJOidWwyKKs5hkFXUbf8JeMO1/
r/eIWI/hqeeQhm/YXWsdrO1KOi2tS92eHTztelTZjKS7d2nLEkl5EELRtE6lVwWK
6T/iENQNtBibRnK6zDRb3acb/MGkdQEDfNmvRwI02ZwIvGlv6bQnQEspKc69YJOo
DiDHb+aqpsSjAY9QlRzM/Dxg3NUknEYOfxoDY6rG9cL1KnZxk+PDfy+z9gno44Tx
vf+G55lBQ+vunQsV/9YHKYsytsj7kYCECp/W50W1ExrOBPhZRR9zM2S14BVCGuIW
EdLVD8R1h0oRcgqlCIrKsnxAqatzIQ==
=RsEC
-----END PGP SIGNATURE-----
Merge tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix KASLR base offset to account for symbol offsets in the vmlinux
ELF file, preventing tool breakages like the drgn debugger
- Fix potential memory corruption of physmem_info during kernel
physical address randomization
- Fix potential memory corruption due to overlap between the relocated
lowcore and identity mapping by correctly reserving lowcore memory
- Fix performance regression and avoid randomizing identity mapping
base by default
- Fix unnecessary delay of AP bus binding complete uevent to prevent
startup lag in KVM guests using AP
* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
s390/boot: Avoid possible physmem_info segment corruption
s390/ap: Refine AP bus bindings complete processing
s390/mm: Pin identity mapping base to zero
s390/mm: Prevent lowcore vs identity mapping overlap
The important core fix is another tweak to our discard discovery
issues. The off by 512 in logical block count seems bad, but in fact
the inline was only ever used in debug prints, which is why no-one
noticed.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZsmoJyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUp5AQCe8tyb
L0iMWG8/9SeQ5Eyj6EN4iy+6nGxFx+c86XtP2wEA7du6y4of9+rOPVHLn8NyLALH
WkJ6K1876z7qsbYhKqA=
=TXd7
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The important core fix is another tweak to our discard discovery
issues. The off by 512 in logical block count seems bad, but in fact
the inline was only ever used in debug prints, which is why no-one
noticed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Do not attempt to configure discard unless LBPME is set
scsi: MAINTAINERS: Add header files to SCSI SUBSYSTEM
scsi: ufs: qcom: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP for SM8550 SoC
scsi: ufs: core: Add a quirk for handling broken LSDBS field in controller capabilities register
scsi: core: Fix the return value of scsi_logical_block_count()
scsi: MAINTAINERS: Update HiSilicon SAS controller driver maintainer
Drop of_match_ptr() from mt9p031_i2c_driver and get rid of ugly CONFIG_OF
if check. This slightly increases the size of mt9p031_i2c_driver on non-OF
system and shouldn't be an issue.
Add mod_devicetable.h include.
It also allows, in case if needed, to enumerate this device via ACPI with
PRP0001 magic.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20230910160126.70122-3-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The driver has an OF match table, still, it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using i2c_get_match_data() if the devices are registered via OF/ID.
Unify the OF/ID table by using MEDIA_BUS_FMT as match data for both these
tables and replace the ID lookup table for the match data by
i2c_get_match_data() and simplifly probe() and mt9p031_init_state().
While at it, remove the trailing comma in the terminator entry for the OF
table making code robust against (theoretical) misrebases or other similar
things where the new entry goes _after_ the termination without the
compiler noticing.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230910160126.70122-2-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add the dynamic resolution support for video "capture_raw" device.
Otherwise it will capture the wrong image data if the width is
not 1920.
Fixes: e080f339c8 ("media: staging: media: starfive: camss: Add capture driver")
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240820112002.560432-1-changhuang.liang@starfivetech.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The graph walk API has been deprecated in commit eac564de09 ("media:
mc: entity: Add entity iterator for media_pipeline") in favour of
pipelien iterators, but the MC documentation hasn't been updated
accordingly. It still documents the deprecated API as the only option.
Fix it by dropping the deprecated function, and documenting the new API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240822212445.2037-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This node contains a child which is only probed if simple-mfd is in the
compatible list. Add this here.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240821162337.33774-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable throttling down the CPU frequency when an alert temperature
threshold (lower than the critical threshold) is reached.
Signed-off-by: Alessandro Zini <alessandro.zini@siemens.com>
Link: https://lore.kernel.org/r/20240814214328.14155-1-alessandro.zini@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit ed07d82f9e ("arm64: dts: ti: k3-am62p-j722s: Move
SoC-specific node properties") introduced the main_gpio1 node
and included the ti,ngpio property, but did not include the
gpio-reserved-ranges property. As a result, the user could try
to access gpios that do not exist. Fix this by introducing the
gpio-reserved-ranges property.
The non-existent gpios are found in the am67x datasheet [1] in Table
5-27.
Depends on patch: dt-bindings: gpio: gpio-davinci: Add the
gpio-reserved-ranges property [2]
[1] https://www.ti.com/lit/ds/symlink/am67.pdf
[2] https://lore.kernel.org/all/20240809154638.394091-2-j-mcarthur@ti.com/
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240809162828.1945821-3-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit 29075cc09f ("arm64: dts: ti: Introduce AM62P5 family of
SoCs") introduced the main_gpio1 node and included the ti,ngpio
property, but did not include the gpio-reserved-ranges property. As a
result, the user could try to access gpios that do not exist. Fix this
by introducing the gpio-reserved-ranges property.
The non-existent gpios are found in the am62p datasheet [1] in Table
5-24.
Depends on patch: dt-bindings: gpio: gpio-davinci: Add the
gpio-reserved-ranges property [2]
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
[2] https://lore.kernel.org/all/20240809154638.394091-2-j-mcarthur@ti.com/
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Link: https://lore.kernel.org/r/20240809162828.1945821-2-j-mcarthur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
mmc1 is not functional and needs clock loopback so that it can
create sampling clock from this for high speed SDIO operations.
Thus, add clklb pin mux to get mmc1 working.
Fixes: a266c180b3 ("arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240809072231.2931206-1-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe0 instance of the PCIe controller on J784S4 SoC supports up to 4
lanes. Additionally, all 4 lanes of PCIe0 can be utilized on J784S4-EVM
via SERDES1. Since SERDES1 is not being used by any peripheral apart
from PCIe0, use all 4 lanes of SERDES1 for PCIe0.
Fixes: 27ce26fe52 ("arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240720110455.3043327-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Debian Testing is now also providing recent Rust releases (outside of
the freeze period), like Debian Unstable (Sid).
Thus add it to the list.
Cc: Fabian Grünbichler <debian@fabian.gruenbichler.email>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.
The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f463 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
removed " in front of "timing domain slow clock", described that
TD_SLCK can also be sourced from slow rc oscillator]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/20240820122604.42736-1-liaochen4@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The maximum number of PLL components on SAMA7G5 is 3 (one fractional
part and 2 dividers). Allocate the needed amount of memory for
sama7g5_plls 2d array. Previous code used to allocate 7 array entries for
each PLL. While at it, replace 3 with PLL_COMPID_MAX in the loop which
parses the sama7g5_plls 2d array.
Fixes: cb783bbbcf ("clk: at91: sama7g5: add clock support for sama7g5")
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240714141315.19480-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The base iomux offsets for each GPIO pin line are accumulatively
calculated based off iomux width flag in rockchip_pinctrl_get_soc_data.
If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or
IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8
bytes, otherwise it would increase by 4 bytes.
Despite most of GPIO2-B iomux have 2-bit data width, which can be fit
into 4 bytes space with write mask, it actually take 8 bytes width for
whole GPIO2-B line.
Commit e8448a6c81 ("pinctrl: rockchip: fix pinmux bits for RK3328
GPIO2-B pins") wrongly set iomux width flag to 0, causing all base
iomux offset for line after GPIO2-B to be calculated wrong. Fix the
iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is
correctly increased by 8, matching the actual width of GPIO2-B iomux.
Fixes: e8448a6c81 ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins")
Cc: stable@vger.kernel.org
Reported-by: Richard Kojedzinszky <richard@kojedz.in>
Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/
Tested-by: Richard Kojedzinszky <richard@kojedz.in>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/20240709105428.1176375-1-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/20240814030155.3876069-1-liaochen4@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If pinctrl_enable() fails in pcs_probe(), it should return the error code.
Fixes: 8f773bfbdd ("pinctrl: single: fix possible memory leak when pinctrl_enable() fails")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/20240819024625.154441-1-yangyingliang@huaweicloud.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When net devices propagate xdp configurations to slave devices,
we will need to perform a memory provider check to ensure we're
not binding xdp to a device using unreadable netmem.
Currently the ->ndo_bpf calls in a few places. Adding checks to all
these places would not be ideal.
Refactor all the ->ndo_bpf calls into one place where we can add this
check in the future.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from
sam9x60 SoC DT.
Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string
to find the number of active GPIO banks and identify the pinmux nodes.It
should used as a constant across all DT for GPIO node banks that uses PIO3
based pinctrl driver
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-4-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the additional compatible string from the
pinctrl nodes in DT to comply with atmel,at91-pinctrl.txt documentation.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-3-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The pinctrl subnodes that define the pin configuration of other devices
under PIO3 pinmux controller are not simple memory mapped nodes.Ergo,
change simple-bus to simple-mfd.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-2-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
rebalance_work was keying off of the presence of rebelance_opts in the
extent - but that was incorrect, we keep those around after rebalance
for indirect extents since the inode's options are not directly
available
Fixes: 20ac515a9c ("bcachefs: bch_acct_rebalance_work")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes an apparent deadlock - rebalance would get stuck trying to
take nocow locks because they weren't being released by copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When a folio that is marked for streaming write (dirty, but not uptodate,
with partial content specified in the private data) is written back, the
folio is effectively switched to the blank state upon completion of the
write. This means that if we want to read it in future, we need to reread
the whole folio.
However, if the folio is above the zero_point position, when it is read
back, it will just be cleared and the read skipped, leading to apparent
local corruption.
Fix this by increasing the zero_point to the end of the dirty data in the
folio when clearing the folio state after writeback. This is analogous to
the folio having ->release_folio() called upon it.
This was causing the config.log generated by configuring a cpython tree on
a cifs share to get corrupted because the scripts involved were appending
text to the file in small pieces.
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/563286.1724500613@warthog.procyon.org.uk
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When netfslib writes to a folio that it doesn't have data for, but that
data exists on the server, it will make a 'streaming write' whereby it
stores data in a folio that is marked dirty, but not uptodate. When it
does this, it attaches a record to folio->private to track the dirty
region.
When truncate() or fallocate() wants to invalidate part of such a folio, it
will call into ->invalidate_folio(), specifying the part of the folio that
is to be invalidated. netfs_invalidate_folio(), on behalf of the
filesystem, must then determine how to trim the streaming write record. In
a couple of cases, however, it does this incorrectly (the reduce-length and
move-start cases are switched over and don't, in any case, calculate the
value correctly).
Fix this by making the logic tree more obvious and fixing the cases.
Fixes: 9ebff83e64 ("netfs: Prep to use folio->private for write grouping and streaming write")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240823200819.532106-5-dhowells@redhat.com
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Pankaj Raghav <p.raghav@samsung.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix netfs_release_folio() to say no (ie. return false) if the folio is
dirty (analogous with iomap's behaviour). Without this, it will say yes to
the release of a dirty page by split_huge_page_to_list_to_order(), which
will result in the loss of untruncated data in the folio.
Without this, the generic/075 and generic/112 xfstests (both fsx-based
tests) fail with minimum folio size patches applied[1].
Fixes: c1ec4d7c2e ("netfs: Provide invalidate_folio and release_folio calls")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240815090849.972355-1-kernel@pankajraghav.com/ [1]
Link: https://lore.kernel.org/r/20240823200819.532106-4-dhowells@redhat.com
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Pankaj Raghav <p.raghav@samsung.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
At the end of an kAFS RPC operation, there is an "edit" phase (originally
intended for post-directory modification ops to edit the local image) that
the setattr VFS op uses to fix up the pagecache if the RPC that requested
truncation of a file was successful.
afs_setattr_edit_file() calls truncate_setsize() which sets i_size, expands
the pagecache if needed and truncates the pagecache. The first two of
those, however, are redundant as they've already been done by
afs_setattr_success() under the io_lock and the first is also done under
the callback lock (cb_lock).
Fix afs_setattr_edit_file() to call truncate_pagecache() instead (which is
called by truncate_setsize(), thereby skipping the redundant parts.
Fixes: 100ccd18bb ("netfs: Optimise away reads above the point at which there can be no data")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240823200819.532106-3-dhowells@redhat.com
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Pankaj Raghav <p.raghav@samsung.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When AS_RELEASE_ALWAYS is set on a mapping, the ->release_folio() and
->invalidate_folio() calls should be invoked even if PG_private and
PG_private_2 aren't set. This is used by netfslib to keep track of the
point above which reads can be skipped in favour of just zeroing pagecache
locally.
There are a couple of places in truncation in which invalidation is only
called when folio_has_private() is true. Fix these to check
folio_needs_release() instead.
Without this, the generic/075 and generic/112 xfstests (both fsx-based
tests) fail with minimum folio size patches applied[1].
Fixes: b4fa966f03 ("mm, netfs, fscache: stop read optimisation when folio removed from pagecache")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240815090849.972355-1-kernel@pankajraghav.com/ [1]
Link: https://lore.kernel.org/r/20240823200819.532106-2-dhowells@redhat.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Pankaj Raghav <p.raghav@samsung.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Algorithm registration is usually carried out during module init,
where as little work as possible should be carried out. The SIMD
code violated this rule by allocating a tfm, this then triggers a
full test of the algorithm which may dead-lock in certain cases.
SIMD is only allocating the tfm to get at the alg object, which is
in fact already available as it is what we are registering. Use
that directly and remove the crypto_alloc_tfm call.
Also remove some obsolete and unused SIMD API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As registration is usually carried out during module init, this
is a context where as little work as possible should be carried
out. Testing may trigger module loads of underlying components,
which could even lead back to the module that is registering at
the moment. This may lead to dead-locks outside of the Crypto API.
Avoid this by not waiting for the tests to complete. They will
be scheduled but completion will be asynchronous. Any users will
still wait for completion.
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to allow testing to complete asynchronously after the
registration process, instance larvals need to complete prior
to having a test result. Support this by redoing the lookup for
instance larvals after completion. This should locate the pending
test larval and then repeat the wait on that (if it is still pending).
As the lookup is now repeated there is no longer any need to compute
the fulfilment status and all that code can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the generic crypto_authenc_extractkeys helper instead of custom
parsing code that is slightly broken. Also fix a number of memory
leaks by moving memory allocation from setkey to init_tfm (setkey
can be called multiple times over the life of a tfm).
Finally accept all hash key lengths by running the digest over
extra-long keys.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the generic crypto_authenc_extractkeys helper instead of custom
parsing code that is slightly broken. Also fix a number of memory
leaks by moving memory allocation from setkey to init_tfm (setkey
can be called multiple times over the life of a tfm).
Finally accept all hash key lengths by running the digest over
extra-long keys.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
