Use native_read_cr*() helpers to read control registers into vmsa->cr*
instead of open-coded assembly.
No functional change intended, unless there was a purpose to specifying
rax.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Link: https://lore.kernel.org/r/20240805201247.427982-1-yosryahmed@google.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240805201247.427982-1-yosryahmed@google.com>
When Tegra audio drivers are built as part of the kernel image,
TIMEOUT_ERR is observed from cbb-fabric. Following is seen on
Jetson AGX Orin during boot:
[ 8.012482] **************************************
[ 8.017423] CPU:0, Error:cbb-fabric, Errmon:2
[ 8.021922] Error Code : TIMEOUT_ERR
[ 8.025966] Overflow : Multiple TIMEOUT_ERR
[ 8.030644]
[ 8.032175] Error Code : TIMEOUT_ERR
[ 8.036217] MASTER_ID : CCPLEX
[ 8.039722] Address : 0x290a0a8
[ 8.043318] Cache : 0x1 -- Bufferable
[ 8.047630] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access
[ 8.054628] Access_Type : Write
[ 8.106130] WARNING: CPU: 0 PID: 124 at drivers/soc/tegra/cbb/tegra234-cbb.c:604 tegra234_cbb_isr+0x134/0x178
[ 8.240602] Call trace:
[ 8.243126] tegra234_cbb_isr+0x134/0x178
[ 8.247261] __handle_irq_event_percpu+0x60/0x238
[ 8.252132] handle_irq_event+0x54/0xb8
These errors happen when MVC device, which is a child of AHUB
device, tries to access its device registers. This happens as
part of call tegra210_mvc_reset_vol_settings() in MVC device
probe().
The root cause of this problem is, the child MVC device gets
probed before the AHUB clock gets enabled. The AHUB clock is
enabled in runtime PM resume of parent AHUB device and due to
the wrong sequence of pm_runtime_enable() in AHUB driver,
runtime PM resume doesn't happen for AHUB device when MVC makes
register access.
Fix this by calling pm_runtime_enable() for parent AHUB device
before of_platform_populate() in AHUB driver. This ensures that
clock becomes available when MVC makes register access.
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Ritu Chaudhary <rituc@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-3-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using kernel with the following extra config,
- CONFIG_KASAN=y
- CONFIG_KASAN_GENERIC=y
- CONFIG_KASAN_INLINE=y
- CONFIG_KASAN_VMALLOC=y
- CONFIG_FRAME_WARN=4096
kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:
[ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270
[ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330
[ 52.047785] Call trace:
[ 52.047787] dump_backtrace+0x0/0x3c0
[ 52.047794] show_stack+0x34/0x50
[ 52.047797] dump_stack_lvl+0x68/0x8c
[ 52.047802] print_address_description.constprop.0+0x74/0x2c0
[ 52.047809] kasan_report+0x210/0x230
[ 52.047815] __asan_report_load1_noabort+0x3c/0x50
[ 52.047820] snd_pcm_suspend_all+0x1a8/0x270
[ 52.047824] snd_soc_suspend+0x19c/0x4e0
The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before
making any access. So we need to always set 'substream->runtime' to NULL
everytime we kfree() it.
Fixes: a72706ed82 ("ASoC: codec2codec: remove ephemeral variables")
Signed-off-by: robelin <robelin@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-2-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently on a very large system with 1780 CPUs, hv_acpi_init() takes
around 3 seconds to complete. This is because of sequential synic
initialization for each CPU performed by hv_synic_init().
Schedule these tasks parallelly so that each CPU executes hv_synic_init()
in parallel to take full advantage of multiple CPUs.
This solution saves around 2 seconds of boot time on a 1780 CPU system,
which is around 66% improvement in the existing logic.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Srivatsa S. Bhat (Microsoft) <srivatsa@csail.mit.edu>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1722488136-6223-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1722488136-6223-1-git-send-email-ssengar@linux.microsoft.com>
Save pkg-config output for libpcap as simply-expanded variables.
For an obscure reason 'shell' call in LDLIBS/CFLAGS recursively
expanded variables makes *.test.o files compilation non-parallel
when make is executed with -j option.
While at it, reuse 'pkg-config --cflags' call to define
-DTRAFFIC_MONITOR=1 option, it's exit status is the same as for
'pkg-config --exists'.
Fixes: f52403b6bf ("selftests/bpf: Add traffic monitor functions.")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823194409.774815-1-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Enable the generic icc sync_state callback to ensure interconnect votes
are actually taken into account, instead of being forced to the maximum
value.
Fixes: b95b668eaa ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-8-1149dd8399fe@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Vendor msm-5.x kernels declared duplicate indices for some of display
nodes to be used by separate display RSC and BCM voters. As it is not
clear how this separate BCM should be modelled upstream and the device
trees do not use these indices, drop them for now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-6-1149dd8399fe@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The msm-5.x kernels have additional display RSC and separate display BCM
voter. Since upstream kernel doesn't yet provide display RSC, we end up
duplicating several nodes, which can result in incorrect votes being
cast. Drop *_DISP nodes.
Fixes: d26a566744 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-4-1149dd8399fe@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This fixes not handling hibernation actions on suspend notifier so they
are treated in the same way as regular suspend actions.
Fixes: 9952d90ea2 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In dbNextAG() , there is no check for the case where bmp->db_numag is
greater or same than MAXAG due to a polluted image, which causes an
out-of-bounds. Therefore, a bounds check should be added in dbMount().
And in dbNextAG(), a check for the case where agpref is greater than
bmp->db_numag should be added, so an out-of-bounds exception should be
prevented.
Additionally, a check for the case where agno is greater or same than
MAXAG should be added in diAlloc() to prevent out-of-bounds.
Reported-by: Jeongjun Park <aha310510@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
In XE, display runtime suspend / resume routines are called only
if d3cold is allowed. This makes the driver unable to detect any
HPDs once the device goes into runtime suspend state in platforms
like LNL. Update the display runtime suspend / resume routines
to include HPD polling regardless of d3cold status.
While xe_display_pm_suspend/resume() performs steps during runtime
suspend/resume that shouldn't happen, like suspending MST and they
are missing other steps like enabling DC9, this patchset is meant
to keep the current behavior wrt. these, leaving the corresponding
updates for a follow-up
v2: have a separate function for display runtime s/r (Rodrigo)
v3: better streamlining of system s/r and runtime s/r calls (Imre)
v4: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-4-vinod.govindapillai@intel.com
This is a preparation for the follow-up patch where polling
will be handled properly for all cases during runtime suspend/resume.
v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-3-vinod.govindapillai@intel.com
Modern (fortified) memcpy() prefers to avoid writing (or reading) beyond
the end of the addressed destination (or source) struct member:
In function ‘fortify_memcpy_chk’,
inlined from ‘syscall_get_arguments’ at ./arch/x86/include/asm/syscall.h:85:2,
inlined from ‘populate_seccomp_data’ at kernel/seccomp.c:258:2,
inlined from ‘__seccomp_filter’ at kernel/seccomp.c:1231:3:
./include/linux/fortify-string.h:580:25: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
580 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As already done for x86_64 and compat mode, do not use memcpy() to
extract syscall arguments from struct pt_regs but rather just perform
direct assignments. Binary output differences are negligible, and actually
ends up using less stack space:
- sub $0x84,%esp
+ sub $0x6c,%esp
and less text size:
text data bss dec hex filename
10794 252 0 11046 2b26 gcc-32b/kernel/seccomp.o.stock
10714 252 0 10966 2ad6 gcc-32b/kernel/seccomp.o.after
Closes: https://lore.kernel.org/lkml/9b69fb14-df89-4677-9c82-056ea9e706f5@gmail.com/
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/all/20240708202202.work.477-kees%40kernel.org
On Loongson-3C6000 and higher systems with AVECINTC irqchip, there may
be multiple PCI segments, but only one PCH-MSI irq domain. In this case,
let get_pch_msi_handle() return the first domain handle.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Co-developed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823104337.25577-1-zhangtianyang@loongson.cn
Rename CPUHP_AP_IRQ_LOONGARCH_STARTING to CPUHP_AP_IRQ_EIOINTC_STARTING
because the upcoming AVECINTC irqchip driver will introduce a new state
and so both are clearly identifiable.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823103936.25092-3-zhangtianyang@loongson.cn
Add architectural preparation for AVEC irqchip, including:
1. CPUCFG feature bits definition for AVEC;
2. Detection of AVEC irqchip in cpu_probe();
3. New IPI type definition (IPI_CLEAR_VECTOR) for AVEC;
4. Provide arch_probe_nr_irqs() for large NR_IRQS;
5. Other related changes about the number of interrupts.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823103936.25092-2-zhangtianyang@loongson.cn
Some irqchip functions are only for internal use by irqchip drivers, so
move their prototypes from asm/irq.h to drivers/irqchip/irq-loongson.h.
All related driver files include the new irq-loongson.h.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823103936.25092-1-zhangtianyang@loongson.cn
Amery Hung says:
====================
Support bpf_kptr_xchg into local kptr
This revision adds substaintial changes to patch 2 to support structures
with kptr as the only special btf type. The test is split into
local_kptr_stash and task_kfunc_success to remove dependencies on
bpf_testmod that would break veristat results.
This series allows stashing kptr into local kptr. Currently, kptrs are
only allowed to be stashed into map value with bpf_kptr_xchg(). A
motivating use case of this series is to enable adding referenced kptr to
bpf_rbtree or bpf_list by using allocated object as graph node and the
storage of referenced kptr. For example, a bpf qdisc [0] enqueuing a
referenced kptr to a struct sk_buff* to a bpf_list serving as a fifo:
struct skb_node {
struct sk_buff __kptr *skb;
struct bpf_list_node node;
};
private(A) struct bpf_spin_lock fifo_lock;
private(A) struct bpf_list_head fifo __contains(skb_node, node);
/* In Qdisc_ops.enqueue */
struct skb_node *skbn;
skbn = bpf_obj_new(typeof(*skbn));
if (!skbn)
goto drop;
/* skb is a referenced kptr to struct sk_buff acquired earilier
* but not shown in this code snippet.
*/
skb = bpf_kptr_xchg(&skbn->skb, skb);
if (skb)
/* should not happen; do something below releasing skb to
* satisfy the verifier */
...
bpf_spin_lock(&fifo_lock);
bpf_list_push_back(&fifo, &skbn->node);
bpf_spin_unlock(&fifo_lock);
The implementation first searches for BPF_KPTR when generating program
BTF. Then, we teach the verifier that the detination argument of
bpf_kptr_xchg() can be local kptr, and use the btf_record in program BTF
to check against the source argument.
This series is mostly developed by Dave, who kindly helped and sent me
the patchset. The selftests in bpf qdisc (WIP) relies on this series to
work.
[0] https://lore.kernel.org/netdev/20240714175130.4051012-10-amery.hung@bytedance.com/
---
v3 -> v4
- Allow struct in prog btf w/ kptr as the only special field type
- Split tests of stashing referenced kptr and local kptr
- v3: https://lore.kernel.org/bpf/20240809005131.3916464-1-amery.hung@bytedance.com/
v2 -> v3
- Fix prog btf memory leak
- Test stashing kptr in prog btf
- Test unstashing kptrs after stashing into local kptrs
- v2: https://lore.kernel.org/bpf/20240803001145.635887-1-amery.hung@bytedance.com/
v1 -> v2
- Fix the document for bpf_kptr_xchg()
- Add a comment explaining changes in the verifier
- v1: https://lore.kernel.org/bpf/20240728030115.3970543-1-amery.hung@bytedance.com/
====================
Link: https://lore.kernel.org/r/20240813212424.2871455-1-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test stashing both referenced kptr and local kptr into local kptrs. Then,
test unstashing them.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-6-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, users can only stash kptr into map values with bpf_kptr_xchg().
This patch further supports stashing kptr into local kptr by adding local
kptr as a valid destination type.
When stashing into local kptr, btf_record in program BTF is used instead
of btf_record in map to search for the btf_field of the local kptr.
The local kptr specific checks in check_reg_type() only apply when the
source argument of bpf_kptr_xchg() is local kptr. Therefore, we make the
scope of the check explicit as the destination now can also be local kptr.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-5-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ARG_PTR_TO_KPTR is currently only used by the bpf_kptr_xchg helper.
Although it limits reg types for that helper's first arg to
PTR_TO_MAP_VALUE, any arbitrary mapval won't do: further custom
verification logic ensures that the mapval reg being xchgd-into is
pointing to a kptr field. If this is not the case, it's not safe to xchg
into that reg's pointee.
Let's rename the bpf_arg_type to more accurately describe the fairly
specific expectations that this arg type encodes.
This is a nonfunctional change.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-4-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently btf_parse_fields is used in two places to create struct
btf_record's for structs: when looking at mapval type, and when looking
at any struct in program BTF. The former looks for kptr fields while the
latter does not. This patch modifies the btf_parse_fields call made when
looking at prog BTF struct types to search for kptrs as well.
Before this series there was no reason to search for kptrs in non-mapval
types: a referenced kptr needs some owner to guarantee resource cleanup,
and map values were the only owner that supported this. If a struct with
a kptr field were to have some non-kptr-aware owner, the kptr field
might not be properly cleaned up and result in resources leaking. Only
searching for kptr fields in mapval was a simple way to avoid this
problem.
In practice, though, searching for BPF_KPTR when populating
struct_meta_tab does not expose us to this risk, as struct_meta_tab is
only accessed through btf_find_struct_meta helper, and that helper is
only called in contexts where recognizing the kptr field is safe:
* PTR_TO_BTF_ID reg w/ MEM_ALLOC flag
* Such a reg is a local kptr and must be free'd via bpf_obj_drop,
which will correctly handle kptr field
* When handling specific kfuncs which either expect MEM_ALLOC input or
return MEM_ALLOC output (obj_{new,drop}, percpu_obj_{new,drop},
list+rbtree funcs, refcount_acquire)
* Will correctly handle kptr field for same reasons as above
* When looking at kptr pointee type
* Called by functions which implement "correct kptr resource
handling"
* In btf_check_and_fixup_fields
* Helper that ensures no ownership loops for lists and rbtrees,
doesn't care about kptr field existence
So we should be able to find BPF_KPTR fields in all prog BTF structs
without leaking resources.
Further patches in the series will build on this change to support
kptr_xchg into non-mapval local kptr. Without this change there would be
no kptr field found in such a type.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-3-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf_parse_kptr() and btf_record_free() do btf_get() and btf_put()
respectively when working on btf_record in program and map if there are
kptr fields. If the kptr is from program BTF, since both callers has
already tracked the life cycle of program BTF, it is safe to remove the
btf_get() and btf_put().
This change prevents memory leak of program BTF later when we start
searching for kptr fields when building btf_record for program. It can
happen when the btf fd is closed. The btf_put() corresponding to the
btf_get() in btf_parse_kptr() was supposed to be called by
btf_record_free() in btf_free_struct_meta_tab() in btf_free(). However,
it will never happen since the invocation of btf_free() depends on the
refcount of the btf to become 0 in the first place.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-2-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add driver for interconnect busses found in MSM8976 based platforms.
The topology consists of four NoCs that are partially controlled by a
RPM processor.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20240709102728.15349-3-a39.skl@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The timerslack_ns setting is used to specify how much the hardware
timers should be delayed, to potentially dispatch multiple timers in a
single interrupt. This is a performance optimization. Timers of
realtime tasks (having a realtime scheduling policy) should not be
delayed.
This logic was inconsitently applied to the hrtimers, leading to delays
of realtime tasks which used timed waits for events (e.g. condition
variables). Due to the downstream override of the slack for rt tasks,
the procfs reported incorrect (non-zero) timerslack_ns values.
This is changed by setting the timer_slack_ns task attribute to 0 for
all tasks with a rt policy. By that, downstream users do not need to
specially handle rt tasks (w.r.t. the slack), and the procfs entry
shows the correct value of "0". Setting non-zero slack values (either
via procfs or PR_SET_TIMERSLACK) on tasks with a rt policy is ignored,
as stated in "man 2 PR_SET_TIMERSLACK":
Timer slack is not applied to threads that are scheduled under a
real-time scheduling policy (see sched_setscheduler(2)).
The special handling of timerslack on rt tasks in downstream users
is removed as well.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240814121032.368444-2-felix.moessbauer@siemens.com
Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.
Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Add '\n' for pr_err in function ovl_parse_param_lowerdir(), which
ensures that error message is displayed at once.
Fixes: b36a5780cb ("ovl: modify layer parameter parsing")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20240705011510.794025-4-chengzhihao1@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The max count of lowerdir is OVL_MAX_STACK[500], which is broken by
commit 37f32f526438("ovl: fix memory leak in ovl_parse_param()") for
parameter Opt_lowerdir. Since commit 819829f0319a("ovl: refactor layer
parsing helpers") and commit 24e16e385f22("ovl: add support for
appending lowerdirs one by one") added check ovl_mount_dir_check() in
function ovl_parse_param_lowerdir(), the 'ctx->nr' should be smaller
than OVL_MAX_STACK, after commit 37f32f526438("ovl: fix memory leak in
ovl_parse_param()") is applied, the 'ctx->nr' is updated before the
check ovl_mount_dir_check(), which leads the max count of lowerdir
to become 499 for parameter Opt_lowerdir.
Fix it by replacing lower layers parsing code with the existing helper
function ovl_parse_layer().
Fixes: 37f32f5264 ("ovl: fix memory leak in ovl_parse_param()")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20240705011510.794025-3-chengzhihao1@huawei.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since commit d492cc2573 ("driver core: device.h: make struct bus_type a
const *"), the driver core can properly handle constant struct bus_type,
move the pci_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Link: https://lore.kernel.org/r/20240823074202.139265-1-kunwu.chan@linux.dev
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no longer any users of the platform data for davinci rawnand
in board files. We can remove the public pdata headers and move the
structures that are still used into the driver compilation unit while
removing the rest.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240814122120.13975-1-brgl@bgdev.pl
Reporting an unclean read from SPI-NAND only when the maximum number
of correctable bitflip errors has been hit seems a bit late.
UBI LEB scrubbing, which depends on the lower MTD device reporting
correctable bitflips, then only kicks in when it's almost too late.
Set bitflip_threshold to 75% of the ECC strength, which is also the
default for raw NAND.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/2117e387260b0a96f95b8e1652ff79e0e2d71d53.1723427450.git.daniel@makrotopia.org
When we are allocating an array, using kmemdup_array() to take care about
multiplication and possible overflows.
Also it makes auditing the code easier.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240823110824.3895787-1-yanzhen@vivo.com
Use of_property_read_bool() to read boolean properties rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240731191312.1710417-22-robh@kernel.org
