ggtt->scratch is destroyed via devm, ggtt_fini sets ggtt->scratch to
NULL, ggtt->scratch in GGTT clears, so ensure ggtt->scratch is set NULL
before the BO is destroyed.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820172958.1095143-2-matthew.brost@intel.com
The NVMe AER notification of a persistent internal error triggers a
reset. The existing warning message just says "due to AER", which can be
confused with the unrelated PCIe AER condition. Just say what the event
was instead of the generic overloaded acronym.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The following calculation used in coalesced_mmio_has_room() to check
whether the ring buffer is full is wrong and results in premature exits if
the start of the valid entries is in the first half of the ring buffer.
avail = (ring->first - last - 1) % KVM_COALESCED_MMIO_MAX;
if (avail == 0)
/* full */
Because negative values are handled using two's complement, and KVM
computes the result as an unsigned value, the above will get a false
positive if "first < last" and the ring is half-full.
The above might have worked as expected in python for example:
>>> (-86) % 170
84
However it doesn't work the same way in C.
printf("avail: %d\n", (-86) % 170);
printf("avail: %u\n", (-86) % 170);
printf("avail: %u\n", (-86u) % 170u);
Using gcc-11 these print:
avail: -86
avail: 4294967210
avail: 0
For illustration purposes, given a 4-bit integer and a ring size of 0xA
(unsigned), 0xA == 0x1010 == -6, and thus (-6u % 0xA) == 0.
Fix the calculation and allow all but one entries in the buffer to be
used as originally intended.
Note, KVM's behavior is self-healing to some extent, as KVM will allow the
entire buffer to be used if ring->first is beyond the halfway point. In
other words, in the unlikely scenario that a use case benefits from being
able to coalesce more than 86 entries at once, KVM will still provide such
behavior, sometimes.
Note #2, the % operator in C is not the modulo operator but the remainder
operator. Modulo and remainder operators differ with respect to negative
values. But, the relevant values in KVM are all unsigned, so it's a moot
point in this case anyway.
Note #3, this is almost a pure revert of the buggy commit, plus a
READ_ONCE() to provide additional safety. Thue buggy commit justified the
change with "it paves the way for making this function lockless", but it's
not at all clear what was intended, nor is there any evidence that the
buggy code was somehow safer. (a) the fields in question were already
accessed locklessly, from the perspective that they could be modified by
userspace at any time, and (b) the lock guarding the ring itself was
changed, but never dropped, i.e. whatever lockless scheme (SRCU?) was
planned never landed.
Fixes: 105f8d40a7 ("KVM: Calculate available entries in coalesced mmio ring")
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240718193543.624039-2-ilstam@amazon.com
[sean: rework changelog to clarify behavior, call out weirdness of buggy commit]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The sparse tool complains as follows:
drivers/nvme/target/debugfs.c:16:15: warning:
symbol 'nvmet_debugfs' was not declared. Should it be static?
This symbol is not used outside debugfs.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Prior to commit 3f29cc82a8 ("nfsd: split sc_status out of
sc_type") states_show() relied on sc_type field to be of valid
type before calling into a subfunction to show content of a
particular stateid. From that commit, we split the validity of
the stateid into sc_status and no longer changed sc_type to 0
while unhashing the stateid. This resulted in kernel oopsing
for nfsv4.0 opens that stay around and in nfs4_show_open()
would derefence sc_file which was NULL.
Instead, for closed open stateids forgo displaying information
that relies of having a valid sc_file.
To reproduce: mount the server with 4.0, read and close
a file and then on the server cat /proc/fs/nfsd/clients/2/states
[ 513.590804] Call trace:
[ 513.590925] _raw_spin_lock+0xcc/0x160
[ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd]
[ 513.591412] states_show+0x44c/0x488 [nfsd]
[ 513.591681] seq_read_iter+0x5d8/0x760
[ 513.591896] seq_read+0x188/0x208
[ 513.592075] vfs_read+0x148/0x470
[ 513.592241] ksys_read+0xcc/0x178
Fixes: 3f29cc82a8 ("nfsd: split sc_status out of sc_type")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace SET_LATE_SYSTEM_SLEEP_PM_OPS() with its modern
LATE_SYSTEM_SLEEP_PM_OPS() alternative.
The combined usage of pm_sleep_ptr() and LATE_SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/20240808162750.244092-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove the erroneus 0x100000 offset to prevent the boards from crashing
on pin state setting, as well as for the intended state changes to take
effect.
Fixes: 05e4941d97 ("pinctrl: qcom: Add X1E80100 pinctrl driver")
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/20240809-topic-h_sdc-v1-1-bb421532c531@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If a system is using preferred cores the highest perf will be inconsistent
as it can change from system events.
Skip the checks for it.
Fixes: e571a5e206 ("cpufreq: amd-pstate: Update amd-pstate preferred core ranking dynamically")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Despite its name, commit fed74d7527 ("pinctrl: mediatek: common-v2:
Fix bias-disable for PULL_PU_PD_RSEL_TYPE") actually broke bias-disable
for PULL_PU_PD_RSEL_TYPE.
mtk_pinconf_bias_set_combo() tries every bias method supported by the
pin until one succeeds. For PULL_PU_PD_RSEL_TYPE pins, before the
breaking commit, mtk_pinconf_bias_set_rsel() would be called first to
try and set the RSEL value (as well as PU and PD), and if that failed,
the only other valid option was that bias-disable was specified, which
would then be handled by calling mtk_pinconf_bias_set_pu_pd() and
disabling both PU and PD.
The breaking commit misunderstood this logic and added an early "return
0" in mtk_pinconf_bias_set_rsel(). The result was that in the
bias-disable case, the bias was left unchanged, since by returning
success, mtk_pinconf_bias_set_combo() no longer tried calling
mtk_pinconf_bias_set_pu_pd() to disable the bias.
Since the logic for configuring bias-disable on PULL_PU_PD_RSEL_TYPE
pins required mtk_pinconf_bias_set_rsel() to fail first, in that case,
an error was printed to the log, eg:
mt8195-pinctrl 10005000.pinctrl: Not support rsel value 0 Ohm for pin = 29 (GPIO29)
This is what the breaking commit actually got rid of, and likely part of
the reason why that commit was thought to be fixing functionality, while
in reality it was breaking it.
Instead of simply reverting that commit, restore the functionality but
in a way that avoids the error from being printed and makes the code
less confusing:
* Return 0 explicitly if a bias method was successful
* Introduce an extra function mtk_pinconf_bias_set_pu_pd_rsel() that
calls both mtk_pinconf_bias_set_rsel() (only if needed) and
mtk_pinconf_bias_set_pu_pd()
* And analogously for the corresponding getters
Fixes: fed74d7527 ("pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/20240808-mtk-rsel-bias-disable-fix-v1-1-1b4e85bf596c@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinmux_generic_get_function() can return NULL and the pointer 'function'
was dereferenced without checking against NULL. Add checking of pointer
'function' in pcs_get_function().
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 571aec4df5 ("pinctrl: single: Use generic pinmux helpers for managing functions")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://lore.kernel.org/20240808041355.2766009-1-make24@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On qcom msm8998, writing to the last context bank of lpass_q6_smmu
(base address 0x05100000) produces a system freeze & reboot.
The hardware/hypervisor reports 13 context banks for the LPASS SMMU
on msm8998, but only the first 12 are accessible...
Override the number of context banks
[ 2.546101] arm-smmu 5100000.iommu: probing hardware configuration...
[ 2.552439] arm-smmu 5100000.iommu: SMMUv2 with:
[ 2.558945] arm-smmu 5100000.iommu: stage 1 translation
[ 2.563627] arm-smmu 5100000.iommu: address translation ops
[ 2.568923] arm-smmu 5100000.iommu: non-coherent table walk
[ 2.574566] arm-smmu 5100000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 2.580220] arm-smmu 5100000.iommu: stream matching with 12 register groups
[ 2.587263] arm-smmu 5100000.iommu: 13 context banks (0 stage-2 only)
[ 2.614447] arm-smmu 5100000.iommu: Supported page sizes: 0x63315000
[ 2.621358] arm-smmu 5100000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
[ 2.627772] arm-smmu 5100000.iommu: preserved 0 boot mappings
Specifically, the crashes occur here:
qsmmu->bypass_cbndx = smmu->num_context_banks - 1;
arm_smmu_cb_write(smmu, qsmmu->bypass_cbndx, ARM_SMMU_CB_SCTLR, 0);
and here:
arm_smmu_write_context_bank(smmu, i);
arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_FSR, ARM_SMMU_CB_FSR_FAULT);
It is likely that FW reserves the last context bank for its own use,
thus a simple work-around is: DON'T USE IT in Linux.
If we decrease the number of context banks, last one will be "hidden".
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240820-smmu-v3-1-2f71483b00ec@freebox.fr
Signed-off-by: Will Deacon <will@kernel.org>
Ideally, we want to drop the legacy vblank enable for older ASICs. This
should be possible now, since we can now specify how many frames we need
to wait before disabling vblanking instead of being forced to either
choose between no delay (which can still be buggy) and
drm_vblank_offdelay (which is much longer by default than is required on
AMD hardware).
Suggested-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-4-hamza.mahfooz@amd.com
Ideally, we want to enable immediate vblank disable, when possible and
we should be able to do so on DCN35+, if PSR isn't supported by a given
CRTC.
Suggested-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-3-hamza.mahfooz@amd.com
Hook up drm_crtc_vblank_on_config() in amdgpu_dm. So, that we can enable
PSR and other static screen optimizations more quickly, while avoiding
stuttering issues that are accompanied by the following dmesg error:
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
This also allows us to mimic how vblanking is handled by the Windows
amdgpu driver. Specifically, we wait two idle frames before disabling
the vblank timer there.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-2-hamza.mahfooz@amd.com
With the new __counted_by annotation, the "num_nodes" struct member must
be set before accessing the "nodes" array. This initialization was done
in other places where a new struct icc_onecell_data is allocated, but this
case in icc_clk_register() was missed. Set "num_nodes" after allocation.
Fixes: dd4904f3b9 ("interconnect: qcom: Annotate struct icc_onecell_data with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716214819.work.328-kees@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The sm8150 camnoc interconnect was mistakenly documented as
"qcom,sm8150-camnoc-noc", for which there is no reference to in
drivers or device tree.
Correct this to "qcom,sm8150-camnoc-virt".
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240716144738.109823-1-rayyan.ansari@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Use of_property_read_bool() to read boolean properties rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/20240731191312.1710417-23-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl-at91 currently does not support the gpio-groups devicetree
property and has no pin-range.
Because of this at91 gpios stopped working since patch
commit 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
This was discussed in the patches
commit fc328a7d1f ("gpio: Revert regression in sysfs-gpio (gpiolib.c)")
commit 56e337f2cf ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
As a workaround manually set pin-range via gpiochip_add_pin_range() until
a) pinctrl-at91 is reworked to support devicetree gpio-groups
b) another solution as mentioned in
commit 56e337f2cf ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
is found
Signed-off-by: Thomas Blocher <thomas.blocher@ek-dev.de>
Link: https://lore.kernel.org/5b992862-355d-f0de-cd3d-ff99e67a4ff1@ek-dev.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When the PCIe devices are discovered late, the driver can't find
the PCIe devices and returns in the init without registering with
the bus notifier. Due to that the devices which are discovered late
the driver can't register for this.
Register for bus notifier & driver even if the device is not found
as part of init.
Fixes: af9597adc2 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-3-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Update document to reflect the driver change to use sbdf instead
of bdf alone.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-2-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
When there are multiple of instances of PCIe controllers, registration
to perf driver fails with this error.
sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0'
CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace.part.8+0x98/0xf0
show_stack+0x14/0x1c
dump_stack_lvl+0x74/0x88
dump_stack+0x14/0x1c
sysfs_warn_dup+0x60/0x78
sysfs_create_dir_ns+0xe8/0x100
kobject_add_internal+0x94/0x224
kobject_add+0xa8/0x118
device_add+0x298/0x7b4
platform_device_add+0x1a0/0x228
platform_device_register_full+0x11c/0x148
dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu]
dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu]
do_one_initcall+0x58/0x1c0
do_init_module+0x58/0x208
load_module+0x1804/0x188c
__do_sys_init_module+0x18c/0x1f0
__arm64_sys_init_module+0x14/0x1c
invoke_syscall+0x40/0xf8
el0_svc_common.constprop.1+0x70/0xf4
do_el0_svc+0x18/0x20
el0_svc+0x28/0xb0
el0t_64_sync_handler+0x9c/0xc0
el0t_64_sync+0x160/0x164
kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST,
don't try to register things with the same name in the same directory.
This is because of having same bdf value for devices under two different
controllers.
Update the logic to use sbdf which is a unique number in case of
multi instance also.
Fixes: af9597adc2 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-1-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The alibaba_uncore_pmu driver forgot to clear all interrupt status
in the interrupt processing function. After the PMU counter overflow
interrupt occurred, an interrupt storm occurred, causing the system
to hang.
Therefore, clear the correct interrupt status in the interrupt handling
function to fix it.
Fixes: cf7b61073e ("drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC")
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1724297611-20686-1-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
This patch adds a new panic screen, with a QR code and the kmsg data
embedded.
If DRM_PANIC_SCREEN_QR_CODE_URL is set, then the kmsg data will be
compressed with zlib and encoded as a numerical segment, and appended
to the URL as a URL parameter. This allows to save space, and put
about ~7500 bytes of kmsg data, in a V40 QR code.
Linux distributions can customize the URL, and put a web frontend to
directly open a bug report with the kmsg data.
Otherwise the kmsg data will be encoded as a binary segment (ie raw
ascii) and only a maximum of 2953 bytes of kmsg data will be
available in the QR code.
You can also limit the QR code size with DRM_PANIC_SCREEN_QR_VERSION.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822073852.562286-5-jfalempe@redhat.com
Drop unsupported features on smu v14_0_2.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When app unmap vm ranges(munmap) kfd/svm starts drain pending page fault and
not handle any incoming pages fault of this process until a deferred work item
got executed by default system wq. The time period of "not handle page fault"
can be long and is unpredicable. That is advese to kfd performance on page
faults recovery.
This patch uses time stamp of incoming page fault to decide to drop or recover
page fault. When app unmap vm ranges kfd records each gpu device's ih ring
current time stamp. These time stamps are used at kfd page fault recovery
routine.
Any page fault happened on unmapped ranges after unmap events is application
bug that accesses vm range after unmap. It is not driver work to cover that.
By using time stamp of page fault do not need drain page faults at deferred
work. So, the time period that kfd does not handle page faults is reduced
and can be controlled.
Signed-off-by: Xiaogang.Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add p2s table support for a new revision of SMUv13.0.6.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add list empty check to avoid null pointer issues in some corner cases.
- list_for_each_entry_safe()
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dcn401/dcn401_dsc.c:30:24: warning:
symbol 'dcn401_dsc_funcs' was not declared. Should it be static?
This symbol is not used outside of dcn401_dsc.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/hubp/dcn35/dcn35_hubp.c:191:19: warning:
symbol 'dcn35_hubp_funcs' was not declared. Should it be static?
This symbol is not used outside of dcn35_hubp.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4.c:12:28: warning:
symbol 'core_dcn4_ip_caps_base' was not declared. Should it be static?
This symbol is not used outside of dcn35_hubp.c, so marks it static.
And do not want to change it, so mark it const.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:6853:56: warning:
symbol 'core_dcn4_g6_temp_read_blackout_table' was not declared. Should it be static?
This symbol is not used outside of dml2_core_dcn4_calcs.c, so marks it static.
And not want to change it, so mark it const.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3575
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver switches to interrupt source id to identify
utcl2 poison event. polling interface is not needed.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move logo rectangle initialisation, and logo drawing in separate
functions, so they can be re-used by different panic screens.
It prepares the introduction of the QR code panic screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822073852.562286-4-jfalempe@redhat.com
when trying to enable p2p the amdgpu_device_is_peer_accessible()
checks the condition where address_mask overlaps the aper_base
and hence returns 0, due to which the p2p disables for this platform
IOMMU should remap the BAR addresses so the device can access
them. Hence check if peer_adev is remapping DMA
v5: (Felix, Alex)
- fixing comment as per Alex feedback
- refactor code as per Felix
v4: (Alex)
- fix the comment and description
v3:
- remove iommu_remap variable
v2: (Alex)
- Fix as per review comments
- add new function amdgpu_device_check_iommu_remap to check if iommu
remap
Signed-off-by: Rahul Jain <Rahul.Jain@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update message interface for smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not supported.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Propagate the unique, per device, ID in the device attributes to the
standard node_guid value in IB device.
Link: https://patch.msgid.link/r/20240822171143.2800-1-mrgolin@amazon.com
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Yehuda Yitschak <yehuday@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Traditional utcl2 fault_status polling does not
work in SRIOV environment. The polling of fault
status register from guest side will be dropped
by hardware.
Driver should switch to check utcl2 interrupt
source id to identify utcl2 poison event. It is
set to 1 when poisoned data interrupts are
signaled.
v2: drop the unused local variable (Tao)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit b97213a411 ("media: v4l2-mc: Make v4l2_pipeline_pm_{get,put}
deprecated") marked the v4l2_pipeline_pm_get() and
v4l2_pipeline_pm_put() functions as deprecated, but forgot to address
the related v4l2_pipeline_link_notify() function similarly. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240822214125.3161-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
