W=1 builds with GCC 14.2.0 warn that:
.../aq_ethtool.c:278:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=]
278 | snprintf(tc_string, 8, "TC%d ", tc);
| ^~
.../aq_ethtool.c:278:56: note: directive argument in the range [-2147483641, 254]
278 | snprintf(tc_string, 8, "TC%d ", tc);
| ^~~~~~~
.../aq_ethtool.c:278:33: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8
278 | snprintf(tc_string, 8, "TC%d ", tc);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tc is always in the range 0 - cfg->tcs. And as cfg->tcs is a u8,
the range is 0 - 255. Further, on inspecting the code, it seems
that cfg->tcs will never be more than AQ_CFG_TCS_MAX (8), so
the range is actually 0 - 8.
So, it seems that the condition that GCC flags will not occur.
But, nonetheless, it would be nice if it didn't emit the warning.
It seems that this can be achieved by changing the format specifier
from %d to %u, in which case I believe GCC recognises an upper bound
on the range of tc of 0 - 255. After some experimentation I think
this is due to the combination of the use of %u and the type of
cfg->tcs (u8).
Empirically, updating the type of the tc variable to unsigned int
has the same effect.
As both of these changes seem to make sense in relation to what the code
is actually doing - iterating over unsigned values - do both.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821-atlantic-str-v1-1-fa2cfe38ca00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution
of tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=htcO
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
If the call to nfs_delegation_grab_inode() fails, we will not have
dropped any locks that require us to rescan the list.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make sure that we clear the layout segments in cases where we see a
fatal error, and also in the case where the layout is invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We're seeing reports of soft lockups when iterating through the loops,
so let's add rescheduling points.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It only decodes the first two words at this point. Have it decode the
third word as well. Without this, the client doesn't send delegated
timestamps in the CB_GETATTR response.
With this change we also need to expand the on-stack bitmap in
decode_recallany_args to 3 elements, in case the server sends a larger
bitmap than expected.
Fixes: 43df7110f4 ("NFSv4: Add CB_GETATTR support for delegated attributes")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The client doesn't properly request FATTR4_OPEN_ARGUMENTS in the initial
SERVER_CAPS getattr. Add FATTR4_WORD2_OPEN_ARGUMENTS to the initial
request.
Fixes: 707f13b3d0 (NFSv4: Add support for the FATTR4_OPEN_ARGUMENTS attribute)
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Merge series from Chen-Yu Tsai <wenst@chromium.org>:
Here are some cleanups for some bits that I saw while reworking my I2C
device tree component prober to use of_regulator_bulk_get_all().
These are not directly related to that series, so I send them
separately here.
Fixes for v6.11-rc5
1) Fixes from the virtual plane series, namely
- fix the list of formats for QCM2290 since it has no YUV support
- minor fix in dpu_plane_atomic_check_pipe() to check only for csc and
not csc and scaler while allowing yuv formats
- take rotation into account while allocating virtual planes
2) Fix to cleanup FB if dpu_format_populate_layout() fails. This fixes the
warning splat during DRM file closure
3) Fix to reset the phy link params before re-starting link training. This
fixes the 100% link training failure when someone starts modetest while
cable is connected
4) Long pending fix to fix a visual corruption seen for 4k modes. Root-cause
was we cannot support 4k@30 with 30bpp with 2 lanes so this is a critical
fix to use 24bpp for such cases
5) Fix to move dpu encoder's connector assignment to atomic_enable(). This
fixes the NULL ptr crash for cases when there is an atomic_enable()
without atomic_modeset() after atomic_disable() . This happens for
connectors_changed case of crtc. It fixes a NULL ptr crash reported
during hotplug.
6) Fix to simplify DPU's debug macros without which dynamic debug does not
work as expected
7) Fix the highest bank bit setting for sc7180
8) adreno: fix error return if missing firmware-name
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvxF2p3-AsjUydmSYrA0Vb+Ea7nh3VtNX0pT0Ae_Me-Kw@mail.gmail.com
The comments have typos, fix that to not confuse readers.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
After the commit 63edbaa48a ("x86/cpu/topology: Add support for the
AMD 0x80000026 leaf"), the topolgy_logical_die_id() function returns
the logical Core Chiplet Die (CCD) ID instead of the logical socket
ID.
Since this is currently used to set MSR_AMD_CPPC_ENABLE, which needs
to be set on any one of the threads of the socket, it is prudent to
use topology_logical_package_id() in place of
topology_logical_die_id().
Fixes: 63edbaa48a ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf")
cc: stable@vger.kernel.org # 6.10
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Link: https://lore.kernel.org/lkml/20240801124509.3650-1-Dhananjay.Ugwekar@amd.com/
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Smatch complains that "ret" could be uninitialized:
drivers/cpufreq/amd-pstate.c:734 amd_pstate_cpu_boost_update()
error: uninitialized symbol 'ret'.
This seems like it probably is a real issue. Initialize "ret" to zero to
be safe.
Fixes: c8c68c38b5 ("cpufreq: amd-pstate: initialize core precision boost state")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/lkml/7ff53543-6c04-48a0-8d99-7dc010b93b3a@stanley.mountain/T/
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Aligned parameters in the function declaration of smack_ip_output
to adhere to the Linux kernel coding style guidelines.
The parameters of the smack_ip_output function were previously misaligned,
with the second and third parameters not aligned under the first parameter.
This change corrects the indentation, improving code readability and
maintaining consistency with the rest of the codebase.
Signed-off-by: GiSeong Ji <jiggyjiggy0323@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
The "name" field in struct nvme_ctrl is unsued so removing it.
This would help save 12 bytes of space for each nvme_ctrl instance
created.
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Commit 4733b65d82 ("nvme: start keep-alive after admin queue setup")
moves starting keep-alive from nvme_start_ctrl() into
nvme_init_ctrl_finish(), but don't move stopping keep-alive into
nvme_uninit_ctrl(), so keep-alive work can be started and keep pending
after failing to start controller, finally use-after-free is triggered if
nvme host driver is unloaded.
This patch fixes kernel panic when running nvme/004 in case that connection
failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl().
This way is reasonable because keep-alive is now started in
nvme_init_ctrl_finish().
Fixes: 3af755a468 ("nvme: move nvme_stop_keep_alive() back to original position")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mark O'Donovan <shiftee@posteo.net>
Reported-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add a selftest to confirm the issue, which gets -EINVAL when update
attached freplace prog to prog_array map, has been fixed.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
328/25 tailcalls/tailcall_freplace:OK
328 tailcalls:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
nvmet_check_ctrl_status() checks the authentication status, so
we don't need to do that prior to calling it.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
As we can set DH-HMAC-CHAP keys, we should also be
able to unset them.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add a 'tls_keyring' attribute to display the contents of the
--keyring option from the connect string. Adding this attribute
allows us to recreate the original connect string from sysfs
settings.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There is a difference between the negotiated TLS key (which is
always present for a TLS encrypted connection) and the configured
TLS key (which is specified with the --tls_key command line option).
To differentate between these two add a new sysfs attribute
'tls_configured_key' to hold the specified on the command line.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Split off TLS sysfs attributes into a separate group to improve
readability and to keep all TLS related handling in one section.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Print a newline for easier userspace handling.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
key_lookup() will always return a key, even if that key is revoked
or invalidated. So check for invalid keys before continuing.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There is a difference between TLS configured (ie the user has
provisioned/requested a key) and TLS enabled (ie the connection
is encrypted with TLS). This becomes important for secure concatenation,
where the initial authentication is run on an unencrypted connection
(ie with TLS configured, but not enabled), and then the queue is reset to
run over TLS (ie TLS configured _and_ enabled).
So to differentiate between those two states store the generated
key in opts->tls_key (as we're using the same TLS key for all queues),
the key serial of the resulting TLS handshake in ctrl->tls_pskid
(to signal that TLS on the admin queue is enabled), and a simple
flag for the queues to indicated that TLS has been enabled.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
TP8018 introduced a new TLS PSK identifier version (version 1), which appended
a PSK hash value to the existing identifier (cf NVMe TCP specification v1.1,
section 3.6.1.3 'TLS PSK and PSK Identity Derivation').
An original (version 0) identifier has the form:
NVMe0<type><hmac> <hostnqn> <subsysnqn>
and a version 1 identifier has the form:
NVMe1<type><hmac> <hostnqn> <subsysnqn> <hash>
This patch modifies the lookup algorthm to compare only the first part
of the identifier (excluding the hash value) to handle both version 0 and
version 1 identifiers.
And the spec declares 'version 0' identifiers obsolete, so the lookup
algorithm is modified to prever v1 identifiers.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
iucv_alloc_device() gets a format string and a varying number of
arguments. This is incorrectly forwarded by calling dev_set_name() with
the format string and a va_list, while dev_set_name() expects also a
varying number of arguments.
Symptoms:
Corrupted iucv device names, which can result in log messages like:
sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952'
Fixes: 4452e8ef8c ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20240821091337.3627068-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is
"OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1,
which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION".
And as Adrian tested, without the patch, adding flow to drop packets
results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_ACTION_ERROR
With the patch, the same results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_LAST_ACTION
Fix this by initializing ovs_drop_reasons with index.
Fixes: 9d802da40b ("net: openvswitch: add last-action drop reason")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Vnhf
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 disable BH when collecting stats via hardware offload to ensure
concurrent updates from packet path do not result in losing stats.
From Sebastian Andrzej Siewior.
Patch #2 uses write seqcount to reset counters serialize against reader.
Also from Sebastian Andrzej Siewior.
Patch #3 ensures vlan header is in place before accessing its fields,
according to KMSAN splat triggered by syzbot.
* tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: validate vlan header
netfilter: nft_counter: Synchronize nft_counter_reset() against reader.
netfilter: nft_counter: Disable BH in nft_counter_offload_stats().
====================
Link: https://patch.msgid.link/20240822101842.4234-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sean Anderson says:
====================
net: xilinx: axienet: Multicast fixes and improvements [part]
====================
First two patches of the series which are fixes.
Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a multicast address is removed but there are still some multicast
addresses, that address would remain programmed into the frame filter.
Fix this by explicitly setting the enable bit for each filter.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After successfully programming the SPI flash with an MFPS auto update
image, the error sysfs attribute reports programming:timeout.
This is caused by an incorrect check on the return value from
wait_for_completion_timeout() in mpfs_auto_update_poll_complete().
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
If host supports Bus Lock Detect, KVM advertises it to guests even if
SVM support is absent. Additionally, guest wouldn't be able to use it
despite guest CPUID bit being set. Fix it by unconditionally clearing
the feature bit in KVM cpu capability.
Reported-by: Jim Mattson <jmattson@google.com>
Closes: https://lore.kernel.org/r/CALMp9eRet6+v8Y1Q-i6mqPm4hUow_kJNhmVHfOV8tMfuSS=tVg@mail.gmail.com
Fixes: 76ea438b4a ("KVM: X86: Expose bus lock debug exception to guest")
Cc: stable@vger.kernel.org
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240808062937.1149-4-ravi.bangoria@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM_CAP_HYPERV_DIRECT_TLBFLUSH is only reported when KVM runs on top of
Hyper-V and hyperv_evmcs/hyperv_svm_test don't need that, these tests check
that the feature is properly emulated for Hyper-V on KVM guests. There's no
corresponding CAP for that, the feature is reported in
KVM_GET_SUPPORTED_HV_CPUID.
Hyper-V specific CPUIDs are not reported by KVM_GET_SUPPORTED_CPUID,
implement dedicated kvm_hv_cpu_has() helper to do the job.
Fixes: 6dac119518 ("KVM: selftests: Make Hyper-V tests explicitly require KVM Hyper-V support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since there is 'hyperv.c' for Hyper-V specific functions already, move
Hyper-V specific functions out of processor.c there.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend KVM's suppression of userspace MSR access failures to MSRs that KVM
reports as emulated, but are ultimately unsupported, e.g. if the VMX MSRs
are emulated by KVM, but are unsupported given the vCPU model.
Suggested-by: Weijiang Yang <weijiang.yang@intel.com>
Reviewed-by: Weijiang Yang <weijiang.yang@intel.com>
Link: https://lore.kernel.org/r/20240802181935.292540-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend KVM's suppression of failures due to a userspace access to an
unsupported, but advertised as a "to save" MSR to all MSRs, not just those
that happen to reach the default case statements in kvm_get_msr_common()
and kvm_set_msr_common(). KVM's soon-to-be-established ABI is that if an
MSR is advertised to userspace, then userspace is allowed to read the MSR,
and write back the value that was read, i.e. why an MSR is unsupported
doesn't change KVM's ABI.
Practically speaking, this is very nearly a nop, as the only other paths
that return KVM_MSR_RET_UNSUPPORTED are {svm,vmx}_get_feature_msr(), and
it's unlikely, though not impossible, that userspace is using KVM_GET_MSRS
on unsupported MSRs.
The primary goal of moving the suppression to common code is to allow
returning KVM_MSR_RET_UNSUPPORTED as appropriate throughout KVM, without
having to manually handle the "is userspace accessing an advertised"
waiver. I.e. this will allow formalizing KVM's ABI without incurring a
high maintenance cost.
Link: https://lore.kernel.org/r/20240802181935.292540-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the definitions of the various MSR arrays above kvm_do_msr_access()
so that kvm_do_msr_access() can query the arrays when handling failures,
e.g. to squash errors if userspace tries to read an MSR that isn't fully
supported, but that KVM advertised as being an MSR-to-save.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a common helper, kvm_do_msr_access(), to invoke the "leaf" APIs that
are type and access specific, and more importantly to handle errors that
are returned from the leaf APIs. I.e. turn kvm_msr_ignored_check() from a
a helper that is called on an error, into a trampoline that detects errors
*and* applies relevant side effects, e.g. logging unimplemented accesses.
Because the leaf APIs are used for guest accesses, userspace accesses, and
KVM accesses, and because KVM supports restricting access to MSRs from
userspace via filters, the error handling is subtly non-trivial. E.g. KVM
has had at least one bug escape due to making each "outer" function handle
errors. See commit 3376ca3f1a ("KVM: x86: Fix KVM_GET_MSRS stack info
leak").
Link: https://lore.kernel.org/r/20240802181935.292540-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor kvm_get_feature_msr() to take the components of kvm_msr_entry as
separate parameters, along with a vCPU pointer, i.e. to give it the same
prototype as kvm_{g,s}et_msr_ignored_check(). This will allow using a
common inner helper for handling accesses to "regular" and feature MSRs.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename all APIs related to feature MSRs from get_msr_feature() to
get_feature_msr(). The APIs get "feature MSRs", not "MSR features".
And unlike kvm_{g,s}et_msr_common(), the "feature" adjective doesn't
describe the helper itself.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor get_msr_feature() to take the index and data pointer as distinct
parameters in anticipation of eliminating "struct kvm_msr_entry" usage
further up the primary callchain.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
