With commit 5b6272e0ef ("PCI: qcom: Add OPP support to scale
performance"), OPP was used to control the interconnect and power domains
if the platform supported OPP. Also to maintain the backward compatibility
with platforms not supporting OPP but just ICC, the above mentioned commit
assumed that if ICC was not available on the platform, it would resort to
OPP.
Unfortunately, some old platforms don't support either ICC or OPP. On those
platforms, resorting to OPP in the absence of ICC throws below errors from
OPP core during suspend and resume:
qcom-pcie 1c08000.pcie: dev_pm_opp_set_opp: device opp doesn't exist
qcom-pcie 1c08000.pcie: _find_key: OPP table not found (-19)
Also, it doesn't make sense to invoke the OPP APIs when OPP is not
supported by the platform at all.
Add a "use_pm_opp" flag to identify whether OPP is supported and use it to
control invoking the OPP APIs.
Fixes: 5b6272e0ef ("PCI: qcom: Add OPP support to scale performance")
Link: https://lore.kernel.org/linux-pci/20240722131128.32470-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
SA8775P SoC has support for the hardware parity check feature on the MHI
RAM (entity that holds MHI registers, etc.) But due to a hardware bug in
the parity check logic, the data parity error interrupt is getting
generated all the time when using MHI. So the hardware team has suggested
disabling the parity check error to work around the hardware bug.
Mask the parity error interrupt in PARF_INT_ALL_5_MASK register.
Fixes: 58d0d3e032 ("PCI: qcom-ep: Add support for SA8775P SOC")
Link: https://lore.kernel.org/linux-pci/20240808063057.7394-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The only way create_namespace_pmem() returns an ENODEV code is if
select_pmem_id(nd_region, &uuid) returns ENODEV when its 2nd parameter
is a null pointer. However, this is impossible because &uuid is always
valid.
Furthermore, create_namespace_pmem() is the only user of
select_pmem_id(), it's safe to remove the 'return -ENODEV' branch.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240819062045.1481298-2-lizhijian@fujitsu.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Use of_property_present() and of_property_read_bool() to test
property presence and read boolean properties rather than
of_(find|get)_property(). This is part of a larger effort to remove
callers of of_find_property() and similar functions.
of_(find|get)_property() leak the DT struct property and data pointers
which is a problem for dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20240731191312.1710417-26-robh@kernel.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
This reverts commit 3b5bbe798b.
Eric reported that systemd-shutdown gets broken by blocking the creating
of pidfds for kthreads as older versions seems to rely on being able to
create a pidfd for any process in /proc.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20240818035818.GA1929@sol.localdomain
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add the correct offset to folio_zero_tail().
Fixes: d86f2de026 ("romfs: Convert romfs_read_folio() to use a folio")
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Link: https://lore.kernel.org/r/Zr0GTnPHfeA0P8nb@casper.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The debugfs_create_dir() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Link: https://patch.msgid.link/20240821083911.3411-1-11162571@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add I915_FORMAT_MOD_4_TILED_BMG_CCS and I915_FORMAT_MOD_4_TILED_LNL_CCS to possible
created modifier for new framebuffer on Xe driver.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816115229.531671-4-juhapekka.heikkila@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add Tile4 type ccs modifiers to indicate presence of compression on Xe2.
Here is defined I915_FORMAT_MOD_4_TILED_LNL_CCS which is meant for
integrated graphics with igpu related limitations
Here is also defined I915_FORMAT_MOD_4_TILED_BMG_CCS which is meant
for discrete graphics with dgpu related limitations
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816115229.531671-3-juhapekka.heikkila@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If pcie_find_root_port() is unable to locate a Root Port, it will return
NULL. Check the pointer for NULL before dereferencing it.
This particular case is in a quirk for devices that are always below a Root
Port, so this won't avoid a problem and doesn't need to be backported, but
check as a matter of style and to prevent copy/paste mistakes.
Link: https://lore.kernel.org/r/20240812202659.1649121-1-samasth.norway.ananda@oracle.com
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
[bhelgaas: drop Fixes: and explain why there's no problem in this case]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Retain documentation on how the voc index is actually calculated in
driver code as it'll be removed in Documentation.
This is a follow up on patch "[PATCH] iio: ABI: remove duplicate
in_resistance_calibbias" from David.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://patch.msgid.link/ZsWdFOIkDtEB9WGO@mail.your-server.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In commit 0f718e10da ("iio: ABI: add missing calibbias attributes"),
the in_resistance_calibbias attribute was added to the main IIO ABI
documentation. This attribute is was already documented in
sysfs-bus-iio-chemical-sgp40. This resulted in a duplicate entry that is
causing documentation build warnings.
This removes the attribute from the sgp40 documentation in favor of the
main IIO ABI documentation since this attribute fits the established
pattern of standard IIO attributes.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240820134739.50c771cb@canb.auug.org.au/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-iio-abi-remove-dup-in_resistance_calibbias-v1-1-e64e58cabb14@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240818172951.121983-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The debugfs_create_dir() return value is never NULL, it is either a
valid pointer or an error one.
Use IS_ERR() to check it.
Fixes: 7ef01f228c ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Fixes: 755113d767 ("thermal/debugfs: Add thermal cooling device debugfs information")
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Link: https://patch.msgid.link/20240821075934.12145-1-11162571@vivo.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Eduard Zingerman says:
====================
__jited test tag to check disassembly after jit
Some of the logic in the BPF jits might be non-trivial.
It might be useful to allow testing this logic by comparing
generated native code with expected code template.
This patch set adds a macro __jited() that could be used for
test_loader based tests in a following manner:
SEC("tp")
__arch_x86_64
__jited(" endbr64")
__jited(" nopl (%rax,%rax)")
__jited(" xorq %rax, %rax")
...
__naked void some_test(void) { ... }
Also add a test for jit code generated for tail calls handling to
demonstrate the feature.
The feature uses LLVM libraries to do the disassembly.
At selftests compilation time Makefile detects if these libraries are
available. When libraries are not available tests using __jit_x86()
are skipped.
Current CI environment does not include llvm development libraries,
but changes to add these are trivial.
This was previously discussed here:
https://lore.kernel.org/bpf/20240718205158.3651529-1-yonghong.song@linux.dev/
Patch-set includes a few auxiliary steps:
- patches #2 and #3 fix a few bugs in test_loader behaviour;
- patch #4 replaces __regex macro with ability to specify regular
expressions in __msg and __xlated using "{{" "}}" escapes;
- patch #8 updates __xlated to match disassembly lines consequently,
same way as __jited does.
Changes v2->v3:
- changed macro name from __jit_x86 to __jited with __arch_* to
specify disassembly arch (Yonghong);
- __jited matches disassembly lines consequently with "..."
allowing to skip some number of lines (Andrii);
- __xlated matches disassembly lines consequently, same as __jited;
- "{{...}}" regex brackets instead of __regex macro;
- bug fixes for old commits.
Changes v1->v2:
- stylistic changes suggested by Yonghong;
- fix for -Wformat-truncation related warning when compiled with
llvm15 (Yonghong).
v1: https://lore.kernel.org/bpf/20240809010518.1137758-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240815205449.242556-1-eddyz87@gmail.com/
====================
Link: https://lore.kernel.org/r/20240820102357.3372779-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both __xlated and __jited work with disassembly.
It is logical to have both work in a similar manner.
This commit updates __xlated macro handling in test_loader.c by making
it expect matches on sequential lines, same way as __jited operates.
For example:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("3: r0 = &(void __percpu *)(r0)") ;; matched on line N+1
Also:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("...") ;; not matched
__xlated("3: r0 = &(void __percpu *)(r0)") ;; mantched on any
;; line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A program calling sub-program which does a tail call.
The idea is to verify instructions generated by jit for tail calls:
- in program and sub-program prologues;
- for subprogram call instruction;
- for tail call itself.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow to verify jit behaviour by writing tests as below:
SEC("tp")
__arch_x86_64
__jited(" endbr64")
__jited(" nopl (%rax,%rax)")
__jited(" xorq %rax, %rax")
...
__naked void some_test(void)
{
asm volatile (... ::: __clobber_all);
}
Allow regular expressions in patterns, same way as in __msg.
By default assume that each __jited pattern has to be matched on the
next consecutive line of the disassembly, e.g.:
__jited(" endbr64") # matched on line N
__jited(" nopl (%rax,%rax)") # matched on line N+1
If match occurs on a wrong line an error is reported.
To override this behaviour use __jited("..."), e.g.:
__jited(" endbr64") # matched on line N
__jited("...") # not matched
__jited(" nopl (%rax,%rax)") # matched on any line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a utility function to get disassembled text for jited
representation of a BPF program designated by file descriptor.
Function prototype looks as follows:
int get_jited_program_text(int fd, char *text, size_t text_sz)
Where 'fd' is a file descriptor for the program, 'text' and 'text_sz'
refer to a destination buffer for disassembled text.
Output format looks as follows:
18: 77 06 ja L0
1a: 50 pushq %rax
1b: 48 89 e0 movq %rsp, %rax
1e: eb 01 jmp L1
20: 50 L0: pushq %rax
21: 50 L1: pushq %rax
^ ^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^
| binary insn | textual insn
| representation | representation
| |
instruction offset inferred local label name
The code and makefile changes are inspired by jit_disasm.c from bpftool.
Use llvm libraries to disassemble BPF program instead of libbfd to avoid
issues with disassembly output stability pointed out in [1].
Selftests makefile uses Makefile.feature to detect if LLVM libraries
are available. If that is not the case selftests build proceeds but
the function returns -EOPNOTSUPP at runtime.
[1] commit eb9d1acf63 ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Upcoming changes require a notation to specify regular expression
matches for regular verifier log messages, disassembly of BPF
instructions, disassembly of jited instructions.
Neither basic nor extended POSIX regular expressions w/o additional
escaping are good for this role because of wide use of special
characters in disassembly, for example:
movq -0x10(%rbp), %rax ;; () are special characters
cmpq $0x21, %rax ;; $ is a special character
*(u64 *)(r10 -16) = r1 ;; * and () are special characters
This commit borrows syntax from LLVM's FileCheck utility.
It replaces __regex macro with ability to embed regular expressions
in __msg patters using "{{" "}}" pairs for escaping.
Syntax for __msg patterns:
pattern := (<verbatim text> | regex)*
regex := "{{" <posix extended regular expression> "}}"
For example, pattern "foo{{[0-9]+}}" matches strings like
"foo0", "foo007", etc.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.
Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:
/* seq A */ /* seq B */
__tag("foo") __tag("foo")
__tag("bar") __tag("bar")
__tag("foo")
Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:
#define __msg(msg) \
__attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))
Using this definition the "seq A" from example above is translated to
BTF as follows:
[..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1
Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.
Fixes: 537c3f66ea ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.
Fixes: 4ef5d6af49 ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_loader based tests in the verbose mode each matched
message leaves a trace in the stderr, e.g.:
./test_progs -vvv -t ...
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
This is not very helpful when debugging such tests and clobbers the
log a lot.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since the register_ftrace_graph() assigns a new fgraph_ops to
fgraph_array before registring it by ftrace_startup_subops(), the new
fgraph_ops can be used in function_graph_enter().
In most cases, it is still OK because those fgraph_ops's hashtable is
already initialized by ftrace_set_filter*() etc.
But if a user registers a new fgraph_ops which does not initialize the
hash list, ftrace_ops_test() in function_graph_enter() causes a NULL
pointer dereference BUG because fgraph_ops->ops.func_hash is NULL.
This can be reproduced by the below commands because function profiler's
fgraph_ops does not initialize the hash list;
# cd /sys/kernel/tracing
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
To fix this problem, add a new fgraph_ops to fgraph_array after
ftrace_startup_subops(). Thus, until the new fgraph_ops is initialized,
we will see fgraph_stub on the corresponding fgraph_array entry.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Fixes: c132be2c4f ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Andrii Nakryiko says:
====================
Support passing BPF iterator to kfuncs
Add support for passing BPF iterator state to any kfunc. Such kfunc has to
declare such argument with valid `struct bpf_iter_<type> *` type and should
use "__iter" suffix in argument name, following the established suffix-based
convention. We add a simple test/demo iterator getter in bpf_testmod.
====================
Link: https://lore.kernel.org/r/20240808232230.2848712-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define BPF iterator "getter" kfunc, which accepts iterator pointer as
one of the arguments. Make sure that argument passed doesn't have to be
the very first argument (unlike new-next-destroy combo).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are potentially useful cases where a specific iterator type might
need to be passed into some kfunc. So, in addition to existing
bpf_iter_<type>_{new,next,destroy}() kfuncs, allow to pass iterator
pointer to any kfunc.
We employ "__iter" naming suffix for arguments that are meant to accept
iterators. We also enforce that they accept PTR -> STRUCT btf_iter_<type>
type chain and point to a valid initialized on-the-stack iterator state.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verifier enforces that all iterator structs are named `bpf_iter_<name>`
and that whenever iterator is passed to a kfunc it's passed as a valid PTR ->
STRUCT chain (with potentially const modifiers in between).
We'll need this check for upcoming changes, so instead of duplicating
the logic, extract it into a helper function.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240808232230.2848712-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Few times, core1 was scheduled to boot first before core0, which leads
to error:
'k3_r5_rproc_start: can not start core 1 before core 0'.
This was happening due to some scheduling between prepare and start
callback. The probe function waits for event, which is getting
triggered by prepare callback. To avoid above condition move event
trigger to start instead of prepare callback.
Fixes: 61f6f68447 ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
[ Applied wakeup event trigger only for Split-Mode booted rprocs ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820105004.2788327-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The AM62x and AM64x SoCs of the TI K3 family has a Cortex M4F core in
the MCU domain. This core is typically used for safety applications in a
stand alone mode. However, some application (non safety related) may
want to use the M4F core as a generic remote processor with IPC to the
host processor. The M4F core has internal IRAM and DRAM memories and are
exposed to the system bus for code and data loading.
A remote processor driver is added to support this subsystem, including
being able to load and boot the M4F core. Loading includes to M4F
internal memories and predefined external code/data memories. The
carve outs for external contiguous memory is defined in the M4F device
node and should match with the external memory declarations in the M4F
image binary. The M4F subsystem has two resets. One reset is for the
entire subsystem i.e including the internal memories and the other, a
local reset is only for the M4F processing core. When loading the image,
the driver first releases the subsystem reset, loads the firmware image
and then releases the local reset to let the M4F processing core run.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240802152109.137243-4-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Building the TSP structure is common for users of the TI-SCI processor
control interface. Factor out this function and put it with the rest
of the TI-SCI processor control functions.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240802152109.137243-3-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain.
The remote processor's life cycle management and IPC mechanisms are
similar across the R5F and M4F cores from remote processor driver
point of view. However, there are subtle differences in image loading
and starting the M4F subsystems.
The YAML binding document provides the various node properties to be
configured by the consumers of the M4F subsystem.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240802152109.137243-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
wq->lockdep_map is set only after __alloc_workqueue()
successfully returns. However, on its error path
__alloc_workqueue() may call destroy_workqueue() which
expects wq->lockdep_map to be already set, which results
in a null-ptr-deref in touch_wq_lockdep_map().
Add a simple NULL-check to touch_wq_lockdep_map().
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__lock_acquire+0x81/0x7800
[..]
Call Trace:
<TASK>
? __die_body+0x66/0xb0
? die_addr+0xb2/0xe0
? exc_general_protection+0x300/0x470
? asm_exc_general_protection+0x22/0x30
? __lock_acquire+0x81/0x7800
? mark_lock+0x94/0x330
? __lock_acquire+0x12fd/0x7800
? __lock_acquire+0x3439/0x7800
lock_acquire+0x14c/0x3e0
? __flush_workqueue+0x167/0x13a0
? __init_swait_queue_head+0xaf/0x150
? __flush_workqueue+0x167/0x13a0
__flush_workqueue+0x17d/0x13a0
? __flush_workqueue+0x167/0x13a0
? lock_release+0x50f/0x830
? drain_workqueue+0x94/0x300
drain_workqueue+0xe3/0x300
destroy_workqueue+0xac/0xc40
? workqueue_sysfs_register+0x159/0x2f0
__alloc_workqueue+0x1506/0x1760
alloc_workqueue+0x61/0x150
...
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Testing on LNL has shown media TLBs need to be invalidated via the GuC,
update xe_vm_invalidate_vma appropriately.
v2: Fix 2 tile case
v3: Include missing local change
Fixes: 3330361543 ("drm/xe/lnl: Add LNL platform definition")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820160129.986889-1-matthew.brost@intel.com
Free job depends on job->vm being valid, the last xe_exec_queue_put can
destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820202309.1260755-1-matthew.brost@intel.com
(cherry picked from commit 32a42c93b7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The HW fence ctx objects are not ref counted rather tied to the life of
an LRC object. HW fences reference the HW fence ctx, HW fences can
outlive LRCs thus resulting in UAF. Drop the HW fence pointer to HW
fence ctx rather just store what is needed directly in HW fence.
v2:
- Fix typo in commit (Ashutosh)
- Use snprintf (Ashutosh)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815193522.16008-1-matthew.brost@intel.com
(cherry picked from commit 60db6f540a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Free job depends on job->vm being valid, the last xe_exec_queue_put can
destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820202309.1260755-1-matthew.brost@intel.com
Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-3-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-2-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Qualcomm pd-mapper is a refcounted singleton, but the refcount is
never incremented, which means the as soon as any remoteproc instance
stops the count will hit 0.
At this point the pd-mapper QMI service is stopped, leaving firmware
without access to the PD information. Stopping any other remoteproc
instances will result in a use-after-free, which best case manifest
itself as a refcount underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 354 at lib/refcount.c:87 refcount_dec_and_mutex_lock+0xc4/0x148
...
Call trace:
refcount_dec_and_mutex_lock+0xc4/0x148
qcom_pdm_remove+0x40/0x118 [qcom_pd_mapper]
...
Fix this by incrementing the refcount, so that the pd-mapper is only
torn down when the last remoteproc stops, as intended.
Fixes: 1ebcde047c ("soc: qcom: add pd-mapper implementation")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240820-pd-mapper-refcount-fix-v1-1-03ea65c0309b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Sometimes it's useful to organize member fields in cache-line boundary.
The 'typecln' sort key is short for type-cacheline and to show samples
in each cacheline. The cacheline size is fixed to 64 for now, but it
can read the actual size once it saves the value from sysfs.
For example, you maybe want to which cacheline in a target is hot or
cold. The following shows members in the cfs_rq's first cache line.
$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)
...
Committer testing:
# root@number:~# perf report -s type,typecln,typeoff -H --stdio
# Total Lost Samples: 0
#
# Samples: 5K of event 'cpu_atom/mem-loads,ldlat=5/P'
# Event count (approx.): 312251
#
# Overhead Data Type / Data Type Cacheline / Data Type Offset
# .............. ..................................................
#
<SNIP>
0.07% struct sigaction
0.05% struct sigaction: cache-line 1
0.02% struct sigaction +0x58 (sa_mask)
0.02% struct sigaction +0x78 (sa_mask)
0.03% struct sigaction: cache-line 0
0.02% struct sigaction +0x38 (sa_mask)
0.01% struct sigaction +0x8 (sa_mask)
<SNIP>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be better to have them in hex to check cacheline alignment.
Percent offset size field
100.00 0 0x1c0 struct cfs_rq {
0.00 0 0x10 struct load_weight load {
0.00 0 0x8 long unsigned int weight;
0.00 0x8 0x4 u32 inv_weight;
};
0.00 0x10 0x4 unsigned int nr_running;
14.56 0x14 0x4 unsigned int h_nr_running;
0.00 0x18 0x4 unsigned int idle_nr_running;
0.00 0x1c 0x4 unsigned int idle_h_nr_running;
...
Committer notes:
Justification from Namhyung when asked about why it would be "better":
Cache line sizes are power of 2 so it'd be natural to use hex and
check whether an offset is in the same boundary. Also 'perf annotate'
shows instruction offsets in hex.
>
> Maybe this should be selectable?
I can add an option and/or a config if you want.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The SM8150 MTP board does not have magically different GPU than the
SM8150, so it cannot use amd,imageon compatible, also pointed by
dtbs_check:
sm8150-mtp.dtb: gpu@2c00000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,adreno-640.1', 'qcom,adreno', 'amd,imageon'] is too long
'qcom,adreno-640.1' does not match '^qcom,adreno-[0-9a-f]{8}$'
'qcom,adreno-640.1' does not match '^amd,imageon-200\\.[0-1]$'
'amd,imageon' was expected
The incorrect amd,imageon compatible was added in commit f30ac26def
("arm64: dts: qcom: add sm8150 GPU nodes") to the SM8150 and later moved
to the SM8150 MTP board in commit 1642ab96ef ("arm64: dts: qcom:
sm8150: Don't start Adreno in headless mode") with an intention to allow
headless mode. This should be solved via proper driver quirks, not fake
compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821140116.436441-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The check that map is NULL is already done in the bpf_map__fd(map) and
returns an errno, which does not run further checks.
In addition, even if the check for map is run, the return is a pointer,
which is not consistent with the err_number returned by bpf_map__fd(map).
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: opensource.kernel@vivo.com
Link: https://lore.kernel.org/r/20240821101500.4568-1-11162571@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
