Introduce uart_port_set_cons() as a wrapper to set @cons of a
uart_port. The wrapper sets @cons under the port lock in order
to prevent @cons from disappearing while another context is
holding the port lock. This is necessary for a follow-up
commit relating to the port lock wrappers, which rely on @cons
not changing between lock and unlock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Théo Lebrun <theo.lebrun@bootlin.com> # EyeQ5, AMBA-PL011
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240820063001.36405-12-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
It will be necessary at times for the uart nbcon console
drivers to acquire the port lock directly (without the
additional nbcon functionality of the port lock wrappers).
These are special cases such as the implementation of the
device_lock()/device_unlock() callbacks or for internal
port lock wrapper synchronization.
Provide low-level variants __uart_port_lock_irqsave() and
__uart_port_unlock_irqrestore() for this purpose.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240820063001.36405-11-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Console drivers typically have to deal with access to the
hardware via user input/output (such as an interactive login
shell) and output of kernel messages via printk() calls.
They use some classic driver-specific locking mechanism in most
situations. But console->write_atomic() callbacks, used by nbcon
consoles, are synchronized only by acquiring the console
context.
The synchronization via the console context ownership is possible
only when the console driver is registered. It is when a
particular device driver is connected with a particular console
driver.
The two synchronization mechanisms must be synchronized between
each other. It is tricky because the console context ownership
is quite special. It might be taken over by a higher priority
context. Also CPU migration must be disabled. The most tricky
part is to (dis)connect these two mechanisms during the console
(un)registration.
Use the driver-specific locking callbacks: device_lock(),
device_unlock(). They allow taking the device-specific lock
while the device is being (un)registered by the related console
driver.
For example, these callbacks lock/unlock the port lock for
serial port drivers.
Note that the driver-specific locking is only needed during
(un)register if it is an nbcon console with the write_atomic()
callback implemented. If write_atomic() is not implemented, the
driver should never attempt to access the hardware without
first acquiring its driver-specific lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-10-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Console drivers typically must deal with access to the hardware
via user input/output (such as an interactive login shell) and
output of kernel messages via printk() calls. To provide the
necessary synchronization, usually some driver-specific locking
mechanism is used (for example, the port spinlock for uart
serial consoles).
Until now, usage of this driver-specific locking has been hidden
from the printk-subsystem and implemented within the various
console callbacks. However, nbcon consoles would need to use it
even in the generic code.
Add device_lock() and device_unlock() callback which will need
to get implemented by nbcon consoles.
The callbacks will use whatever synchronization mechanism the
driver is using for itself. The minimum requirement is to
prevent CPU migration. It would allow a context friendly
acquiring of nbcon console ownership in non-emergency and
non-panic context.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-9-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
The write_atomic() callback has special requirements and is
allowed to use special helper functions. Provide detailed
documentation of the callback so that a developer has a
chance of implementing it correctly.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-8-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
The return value of write_atomic() does not provide any useful
information. On the contrary, it makes things more complicated
for the caller to appropriately deal with the information.
Change write_atomic() to not have a return value. If the
message did not get printed due to loss of ownership, the
caller will notice this on its own. If ownership was not lost,
it will be assumed that the driver successfully printed the
message and the sequence number for that console will be
incremented.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-7-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
The functions nbcon_owner_matches() and nbcon_waiter_matches()
use a minimal set of data to determine if a context matches.
The existing kerneldoc and comments were not clear enough and
caused the printk folks to re-prove that the functions are
indeed reliable in all cases.
Update and expand the explanations so that it is clear that the
implementations are sufficient for all cases.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-6-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Add validation that printk_deferred_enter()/_exit() are called in
non-migration contexts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-5-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
If a non-boot console is registering and boot consoles exist,
the consoles are flushed before being unregistered. This allows
the non-boot console to continue where the boot console left
off.
If for whatever reason flushing fails, the lowest seq found from
any of the enabled boot consoles is used. Until now con->seq was
checked. However, if it is an nbcon boot console, the function
nbcon_seq_read() must be used to read seq because con->seq is
not updated for nbcon consoles.
Check if it is an nbcon boot console and if so call
nbcon_seq_read() to read seq.
Also, avoid usage of con->seq as temporary storage of the
starting record. Instead, rename console_init_seq() to
get_init_console_seq() and just return the value. For nbcon
consoles set the sequence via nbcon_seq_force(), for legacy
consoles set con->seq.
The cleaned design should make sure that the value stays and is
set before the console is added to the console list. It also
unifies the sequence number initialization for legacy and nbcon
consoles.
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20240820063001.36405-4-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Rather than splitting the nbcon allocation and initialization into
two pieces, perform all initialization in nbcon_alloc(). Later,
the initial sequence is calculated and can be explicitly set using
nbcon_seq_force(). This removes the need for the strong rules of
nbcon_init() that even included a BUG_ON().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-3-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
kernel/printk/printk.c:284:5: sparse: sparse: context imbalance in
'console_srcu_read_lock' - wrong count at exit
include/linux/srcu.h:301:9: sparse: sparse: context imbalance in
'console_srcu_read_unlock' - unexpected unlock
Fixes: 6c4afa7914 ("printk: Prepare for SRCU console list protection")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240820063001.36405-2-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Print the error code in the pca953x_write_regs() and pca953x_read_regs()
functions to help debugging.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20240821114202.2072220-1-festevam@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
WWAN device is programmed to boot in normal mode or fastboot mode,
when triggering a device reset through ACPI call or fastboot switch
command. Maintain state machine synchronization and reprobe logic
after a device reset.
The PCIe device reset triggered by several ways.
E.g.:
- fastboot: echo "fastboot_switching" > /sys/bus/pci/devices/${bdf}/t7xx_mode.
- reset: echo "reset" > /sys/bus/pci/devices/${bdf}/t7xx_mode.
- IRQ: PCIe device request driver to reset itself by an interrupt request.
Use pci_reset_function() as a generic way to reset device, save and
restore the PCIe configuration before and after reset device to ensure
the reprobe process.
Suggestion from Bjorn:
Link: https://lore.kernel.org/all/20230127133034.GA1364550@bhelgaas/
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An unordered list in coding-guidelines.rst was indented, producing
a blockquote around it and making it look more indented than expected.
Remove the indentation to only output an unordered list.
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1063
Fixes: d07479b211 ("docs: add Rust documentation")
Signed-off-by: Vincent Woltmann <vincent@woltmann.art>
Link: https://lore.kernel.org/r/20240816200339.2495875-1-vincent@woltmann.art
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When allocating `struct gendisk`, `GenDiskBuilder` is using a dynamic
lock class key without registering the key. This is an incorrect use of
the API, which causes a `WARN` trace.
Fix the issue by using a static lock class key, which is more appropriate
for the situation anyway.
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Reported-by: Behme Dirk (XC-CP/ESB5) <Dirk.Behme@de.bosch.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/457090036
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20240815074519.2684107-3-nmi@metaspace.dk
[ Applied `rustfmt`, reworded slightly and made Zulip link
a permalink. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
dev_err_probe() combines 'return' and error code printing, thus code is
a bit simpler, even if it cannot actually defer.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-6-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240818172930.121898-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos7885 SoC has a DWC3 USB Controller with Exynos USB PHY which in
theory supports USB3 SuperSpeed, but is only used as USB2 in all known
devices.
These clocks are needed for everything related to USB.
While at it, also remove the CLK_SET_RATE_PARENT capability of
CLK_MOUT_FSYS_USB30DRD_USER, since it's not actually needed.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240816175034.769628-3-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
pll1418x is used in Exynos7885 SoC for USB PHY clock.
Operation-wise it is very similar to pll0822x, except that MDIV is only
9 bits wide instead of 10, and we use the CON1 register in the PLL
macro's "con" parameter instead of CON3 like this:
PLL(pll_1418x, CLK_FOUT_USB_PLL, "fout_usb_pll", "oscclk",
PLL_LOCKTIME_PLL_USB, PLL_CON0_PLL_USB,
pll_usb_rate_table),
Technically the PLL should work fine with pll0822x code if the PLL
tables are correct, but it's more "correct" to actually update the mask.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240816175034.769628-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
dm_zone_map_bio() has beed removed since commit f211268ed1 ("dm: Use
the block layer zone append emulation"), remain the declaration unused in
header files. So, let's remove this unused declaration and empty
definition.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Ensure the recovery journal does not attempt recovery when blocks
with mismatched metadata versions are detected. This check is
performed after determining that the blocks are otherwise valid
so that it does not interfere with normal recovery.
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Abort the load process with status code VDO_UNSUPPORTED_VERSION
without forcing read-only mode when a journal block with the
old format version is detected.
Forcing the VDO volume into read-only mode and thus requiring
a read-only rebuild should only be done when absolutely necessary.
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Add a new dmsetup message called config, which will return
useful configuration information for the vdo volume and
the uds index associated with it. The output is a YAML
string, and contains a version number to allow future
additions to the content.
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Remove this check to prevent spurious warning messages due to
the behavior of other storage layers. This check was intended
to make sure dm-vdo does not chain metadata bios together.
However, vdo has no control over underlying storage layers,
so the assertion is not always true.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Clear the dedupe_context pointer in a data_vio whenever ownership of
the context is lost, so that vdo can't examine it accidentally.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The rp->priv->rpi array is either rpi_msr or rpi_tpmi which have
NR_RAPL_PRIMITIVES number of elements. Thus the > needs to be >=
to prevent an off by one access.
Fixes: 98ff639a72 ("powercap: intel_rapl: Support per Interface primitive information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/86e3a059-504d-4795-a5ea-4a653f3b41f8@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Extend the code patching selftests with some basic coverage of the new
data patching variants too.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-6-bgray@linux.ibm.com
These changes are for patch_instruction() uses on data. Unlike ppc64
these should not be incorrect as-is, but using the patch_uint() alias
better reflects what kind of data being patched and allows for
benchmarking the effect of different patch_* implementations (e.g.,
skipping instruction flushing when patching data).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-5-bgray@linux.ibm.com
This use of patch_instruction() is working on 32 bit data, and can fail
if the data looks like a prefixed instruction and the extra write
crosses a page boundary. Use patch_u32() to fix the write size.
Fixes: 8734b41b3e ("powerpc/module_64: Fix livepatching for RO modules")
Link: https://lore.kernel.org/all/20230203004649.1f59dbd4@yea/
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-4-bgray@linux.ibm.com
The new data patching still needs to be aligned within a
cacheline too for the flushes to work correctly. To simplify
this requirement, we just say data patches must be aligned.
Detect when data patching is not aligned, returning an invalid
argument error.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-3-bgray@linux.ibm.com
patch_instruction() is designed for patching instructions in otherwise
readonly memory. Other consumers also sometimes need to patch readonly
memory, so have abused patch_instruction() for arbitrary data patches.
This is a problem on ppc64 as patch_instruction() decides on the patch
width using the 'instruction' opcode to see if it's a prefixed
instruction. Data that triggers this can lead to larger writes, possibly
crossing a page boundary and failing the write altogether.
Introduce patch_uint(), and patch_ulong(), with aliases patch_u32(), and
patch_u64() (on ppc64) designed for aligned data patches. The patch
size is now determined by the called function, and is passed as an
additional parameter to generic internals.
While the instruction flushing is not required for data patches, it
remains unconditional in this patch. A followup series is possible if
benchmarking shows fewer flushes gives an improvement in some
data-patching workload.
ppc32 does not support prefixed instructions, so is unaffected by the
original issue. Care is taken in not exposing the size parameter in the
public (non-static) interface, so the compiler can const-propagate it
away.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-2-bgray@linux.ibm.com
