In any normal situation this really shouldn't matter, but in case the
address passed in to masked_user_access_begin() were to be some complex
expression, we should evaluate it fully before doing the 'stac'
instruction.
And even without that issue (which objdump would pick up on for any
really bad case), just in general we should strive to minimize the
amount of code we run with user accesses enabled.
For example, even for the trivial pselect6() case, the code generation
(obviously with a non-debug build) just diff with this ends up being
- stac
mov %rax,%rcx
sar $0x3f,%rcx
or %rax,%rcx
+ stac
mov (%rcx),%r13
mov 0x8(%rcx),%r14
clac
so the area delimeted by the 'stac / clac' pair is now literally just
the two user access instructions, and the address generation has been
moved out to before that code.
This will be much more noticeable if we end up deciding that we can go
back to just inlining "get_user()" using the new masked user access
model. The get_user() pointers can often be more complex expressions
involving kernel memory accesses or even function calls.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Spectre-v1 mitigations made "access_ok()" much more expensive, since
it has to serialize execution with the test for a valid user address.
All the normal user copy routines avoid this by just masking the user
address with a data-dependent mask instead, but the fast
"unsafe_user_read()" kind of patterms that were supposed to be a fast
case got slowed down.
This introduces a notion of using
src = masked_user_access_begin(src);
to do the user address sanity using a data-dependent mask instead of the
more traditional conditional
if (user_read_access_begin(src, len)) {
model.
This model only works for dense accesses that start at 'src' and on
architectures that have a guard region that is guaranteed to fault in
between the user space and the kernel space area.
With this, the user access doesn't need to be manually checked, because
a bad address is guaranteed to fault (by some architecture masking
trick: on x86-64 this involves just turning an invalid user address into
all ones, since we don't map the top of address space).
This only converts a couple of examples for now. Example x86-64 code
generation for loading two words from user space:
stac
mov %rax,%rcx
sar $0x3f,%rcx
or %rax,%rcx
mov (%rcx),%r13
mov 0x8(%rcx),%r14
clac
where all the error handling and -EFAULT is now purely handled out of
line by the exception path.
Of course, if the micro-architecture does badly at 'clac' and 'stac',
the above is still pitifully slow. But at least we did as well as we
could.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are some declarations without function definition, which are listed
as below:
1. ipoib_ib_tx_timer_func() has also been removed since
commit 8966e28d2e ("IB/ipoib: Use NAPI in UD/TX flows")
2. ipoib_pkey_event() has been removed since
commit ee1e2c82c2 ("IPoIB: Refresh paths instead of flushing them on
SM change events")
3. ipoib_mcast_dev_down() has been removed since
commit 988bd50300 ("IPoIB: Fix memory leak of multicast group
structures")
4. ipoib_pkey_open() has been removed since
commit dd57c9308a ("IB/ipoib: Avoid multicast join attempts with
invalid P_key")
Remove these unused declarations.
Link: https://patch.msgid.link/r/20240818055702.79547-3-zhangzekun11@huawei.com
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The definition of rdma_resolve_ip_route() has been removed. Remove the
unused declaration.
Fixes: 6aaecd3856 ("RDMA/core: Simplify roce_resolve_route_from_path()")
Link: https://patch.msgid.link/r/20240818055702.79547-2-zhangzekun11@huawei.com
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=iUQo
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- memory corruption fixes for hid-cougar (Camila Alvarez) and
hid-amd_sfh (Olivier Sobrie)
- fix for regression in Wacom driver of twist gesture handling (Jason
Gerecke)
- two new device IDs for hid-multitouch (Dmitry Savin) and hid-asus
(Luke D. Jones)
* tag 'hid-for-linus-2024081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Defer calculation of resolution until resolution_code is known
HID: multitouch: Add support for GT7868Q
HID: amd_sfh: free driver_data after destroying hid device
hid-asus: add ROG Ally X prod ID to quirk list
HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup
The handling of mmap and mmap2 events is near identical. Add a common
helper function and call that by the two event handling functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are repipe, build ID and JIT dump variants of the mmap and mmap2
repipe functions. The organization doesn't allow JIT dump to work with
build ID injection and the structure is less than clear. Combine the
function and enable the different behaviors based on ifs.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is clearer to have a single enum that determines how build ids are
injected, it also allows for future extension.
Set the header build ID feature whether lazy or all are generated,
previously only the lazy case would set it.
Allow parsing of known build IDs for either the lazy or all cases.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test recording of call-graphs and injecting --build-all. Add/expand
trap handler.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows evsel__id_hdr_size() to be used when the evsel is const.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The passed dso_id is copied and so is never an out argument. Remove
its mutability.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make it clearer the argument is just being used as a string.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
map__init() is only used internally so make it static. Assume memory is
zero initialized, which will better support adding fields to struct
map in the future and was already the case for map__new2.
To reduce complexity, change set_priv and set_erange_warned to not take
a value to assign as they always assign true.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make sure the memset of a synthesized event only zeros the necessary
tracing data part of the event, as a full event can be over 4kb in
size.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 32-bit arm build system will complain:
tools/perf/util/python.c:75:28: error: field ‘sample’ has incomplete type
75 | struct perf_sample sample;
However, arm64 build system doesn't complain this.
The root cause is arm64 define "HAVE_KVM_STAT_SUPPORT := 1" in
tools/perf/arch/arm64/Makefile, but arm arch doesn't define this. This
will lead to kvm-stat.h include other header files on arm64 build
system, especially "util/sample.h" for util/python.c.
This will try to directly include "util/sample.h" for "util/python.c" to
avoid such build issue on arm platform.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: imx@lists.linux.dev
Link: https://lore.kernel.org/r/20240819023403.201324-1-xu.yang_2@nxp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Exec_queue cleanup requires HW access, so we need to use devm instead of
drmm for it.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815230541.3828206-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 5a891a0e69)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The BO cleanup touches the GGTT and therefore requires the HW to be
available, so we need to use devm instead of drmm.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1160
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809231237.1503796-2-daniele.ceraolospurio@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8d3a2d3d76)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This WA is applied while initializing the media GT, but it a primary
GT WA (because it modifies a register on the primary GT), so the XE_WA
macro is returning false even when the WA should be applied.
Fix this by using the primary GT in the macro.
Note that this WA only applies to PXP and we don't yet support that in
Xe, so there are no negative effects to this bug, which is why we didn't
see any errors in testing.
v2: use the primary GT in the macro instead of marking the WA as
platform-wide (Lucas, Matt).
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807235333.1370915-1-daniele.ceraolospurio@intel.com
(cherry picked from commit e422c0bfd9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Wa_15015404425 asks us to perform four "dummy" writes to a
non-existent register offset before every real register read.
Although the specific offset of the writes doesn't directly
matter, the workaround suggests offset 0x130030 as a good target
so that these writes will be easy to recognize and filter out in
debugging traces.
V5(MattR):
- Avoid negating an equality comparison
V4(MattR):
- Use writel and remove xe_reg usage
V3(MattR):
- Define dummy reg local to function
- Avoid tracing dummy writes
- Update commit message
V2:
- Add WA to 8/16/32bit reads also - MattR
- Corrected dummy reg address - MattR
- Use for loop to avoid mental pause - JaniN
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240709155606.2998941-1-tejas.upadhyay@intel.com
(cherry picked from commit 86c5b70a9c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Issuing the flush on top of an ongoing flush is not desirable.
Lets use lock to make it sequential.
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710052750.3031586-1-tejas.upadhyay@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 71733b8d7f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
workaround 14021402888 also applies to Xe2_LPG.
Replicate the existing entry to one specific for Xe2_LPG.
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703090754.1323647-1-krishnaiah.bommu@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 56ab698699)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This involves enabling l2 caching of host side memory access to VRAM
through the CPU BAR. The main fallout here is with display since VRAM
writes from CPU can now be cached in GPU l2, and display is never
coherent with caches, so needs various manual flushing. In the case of
fbc we disable it due to complications in getting this to work
correctly (in a later patch).
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703124338.208220-3-matthew.auld@intel.com
(cherry picked from commit 01570b4469)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210916153148.14045-1-caihuoqing@baidu.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert binding doc colibri-vf50-ts.txt to yaml.
Additional change:
- add ref touchscreen.yaml.
- remove standard pinctrl properties.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: /touchscreen:
failed to match any schema with compatible: ['toradex,vf50-touchscreen']
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240819142434.311760-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We recently moved the teardown of the vgic part of a vcpu inside
a critical section guarded by the config_lock. This teardown phase
involves calling into kvm_io_bus_unregister_dev(), which takes the
kvm->srcu lock.
However, this violates the established order where kvm->srcu is
taken on a memory fault (such as an MMIO access), possibly
followed by taking the config_lock if the GIC emulation requires
mutual exclusion from the other vcpus.
It therefore results in a bad lockdep splat, as reported by Zenghui.
Fix this by moving the call to kvm_io_bus_unregister_dev() outside
of the config_lock critical section. At this stage, there shouln't
be any need to hold the config_lock.
As an additional bonus, document the ordering between kvm->slots_lock,
kvm->srcu and kvm->arch.config_lock so that I cannot pretend I didn't
know about those anymore.
Fixes: 9eb18136af ("KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240819125045.3474845-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
If there were LPIs being mapped behind our back (i.e., between .start() and
.stop()), we would put them at iter_unmark_lpis() without checking if they
were actually *marked*, which is obviously not good.
Switch to use the xa_for_each_marked() iterator to fix it.
Cc: stable@vger.kernel.org
Fixes: 85d3ccc8b7 ("KVM: arm64: vgic-debug: Use an xarray mark for debug iterator")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240817101541.1664-1-yuzenghui@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Enable clk generators for sg2042 due to many peripherals rely on
these clocks.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This patch is to move nf_ct_netns_get() out of nf_conncount_init()
and let the consumers of nf_conncount decide if they want to turn
on netfilter conntrack.
It makes nf_conncount more flexible to be used in other places and
avoids netfilter conntrack turned on when using it in openvswitch
conntrack.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pipapo set backend maintains two copies of the datastructure, removing
the elements from the copy that is going to be discarded slows down
the abort path significantly, from several minutes to few seconds after
this patch.
This patch was previously reverted by
f86fb94011 ("netfilter: nf_tables: revert do not remove elements if set backend implements .abort")
but it is now possible since recent work by Florian Westphal to perform
on-demand clone from insert/remove path:
532aec7e87 ("netfilter: nft_set_pipapo: remove dirty flag")
3f1d886cc7 ("netfilter: nft_set_pipapo: move cloning of match info to insert/removal path")
a238106703 ("netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone")
c5444786d0 ("netfilter: nft_set_pipapo: merge deactivate helper into caller")
6c108d9bee ("netfilter: nft_set_pipapo: prepare walk function for on-demand clone")
8b8a241755 ("netfilter: nft_set_pipapo: prepare destroy function for on-demand clone")
80efd2997f ("netfilter: nft_set_pipapo: make pipapo_clone helper return NULL")
a590f47609 ("netfilter: nft_set_pipapo: move prove_locking helper around")
after this series, the clone is fully released once aborted, no need to
take it back to previous state. Thus, no stale reference to elements can
occur.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_set_lookup_byid() is very slow when transaction becomes large, due to
walk of the transaction list.
Add a dedicated list that contains only the new sets.
Before: nft -f ruleset 0.07s user 0.00s system 0% cpu 1:04.84 total
After: nft -f ruleset 0.07s user 0.00s system 0% cpu 30.115 total
.. where ruleset contains ~10 sets with ~100k elements.
The above number is for a combined flush+reload of the ruleset.
With previous flush, even the first NEWELEM has to walk through a few
hundred thousands of DELSET(ELEM) transactions before the first NEWSET
object. To cope with random-order-newset-newsetelem we'd need to replace
commit_set_list with a hashtable.
Expectation is that a NEWELEM operation refers to the most recently added
set, so last entry of the dedicated list should be the set we want.
NB: This is not a bug fix per se (functionality is fine), but with
larger transaction batches list search takes forever, so it would be
nice to speed this up for -stable too, hence adding a "fixes" tag.
Fixes: 958bee14d0 ("netfilter: nf_tables: use new transaction infrastructure to handle sets")
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use consume_skb in the batch code path to avoid generating spurious
NOT_SPECIFIED skb drop reasons.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Test that nfqueue with and without GSO process SCTP packets correctly.
Joint work with Florian and Pablo.
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
when packet is enqueued with nfqueue and GSO is enabled, checksum
calculation has to take into account the protocol, as SCTP uses a
32 bits CRC checksum.
Enter skb_gso_segment() path in case of SCTP GSO packets because
skb_zerocopy() does not support for GSO_BY_FRAGS.
Joint work with Pablo.
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=2wc2
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Do not block printk on non-panic CPUs when they are dumping
backtraces
* tag 'printk-for-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Allow cpu backtraces to be written into ringbuffer during panic
Move the "exit sleep mode" and "set display on" command from
enable() to init() function.
As mentioned in the patch:
https://lore.kernel.org/all/20240624141926.5250-2-lvzhaoxiong@huaqin.corp-partner.google.com/
The Mediatek Soc DSI host has different modes in prepare() and
enable() functions, prepare() is in LP mode and enable() is in
HS mode. Since the "exit sleep mode" and "set display on"
command must also be sent in LP mode, so we also move "exit
sleep mode" and "set display on" command to the init() function.
We have no other actions in the enable() function after moves
"exit sleep mode" and "set display on", and we checked the call
of the enable() function during the "startup" process. It seems
that only one judgment was made in drm_panel_enabel(). If the
panel does not define enable(), the judgment will skip the
enable() and continue execution. This does not seem to have
any other effect, and we found that some drivers also seem
to have no enable() function added, for example:
panel-asus-z00t-tm5p5-n35596 / panel-boe-himax8279d...
In addition, we briefly tested the kingdisplay_kd101ne3 panel and
melfas_lmfbx101117480 panel, and it seems that there is no garbage
on the panel, so we delete enable() function.
After moving the "exit sleep mode" and "set display on" command
to the init() function, we no longer need additional delay
judgment, so we delete variables "exit_sleep_to_display_on_delay_ms"
and "display_on_delay_ms".
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com
These new trace points record xarray indices and the time of
endpoint registration and unregistration, to co-ordinate with
device removal events.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Nit: The built-in xa_limit_32b range starts at 0, but
XA_FLAGS_ALLOC1 configures the xarray's allocator to start at 1.
Adopt the more conventional XA_FLAGS_ALLOC because there's no
mechanical reason to skip 0.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the device's reference count is too high, the device completion
callback never fires.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The Anbernic RG28XX is a handheld gaming device with a 2.8 inch 480x640
display. Add support for the display panel.
This panel is driven by a variant of ST7701 driver IC internally,
confirmed by dumping and analyzing its BSP initialization sequence
by using a logic analyzer. It is very similar to the existing
densitron,dmt028vghmcmi-1a panel, but differs in some unknown
register values. Besides, it is connected via SPI, so add a new entry
for the panel.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240804061503.881283-6-kikuchan98@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-6-kikuchan98@gmail.com
The ST7701 supports not only MIPI DSI, but also SPI as an interface
for configuration. To support a panel connected via SPI with an RGB
parallel interface, add support for SPI using MIPI DBI helpers.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240804061503.881283-5-kikuchan98@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-5-kikuchan98@gmail.com
The RG28XX panel is a display panel of the Anbernic RG28XX, a handheld
gaming device from Anbernic. It is 2.8 inches in size (diagonally) with
a resolution of 480x640.
This panel is driven by a variant of the ST7701 driver IC internally,
confirmed by dumping and analyzing its BSP initialization sequence
by using a logic analyzer. It is very similar to the existing
densitron,dmt028vghmcmi-1a panel, but differs in some unknown
register values, so add a new entry for the panel to distinguish them.
Additionally, the panel only has an SPI instead of MIPI DSI.
So add and modify for SPI as well.
Although a panel connected via SPI with a D/CX pin theoretically exists,
no such panels have been found for this driver yet. Therefore, disable
the use of the dc-gpios property for all currently known devices.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240804061503.881283-4-kikuchan98@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-4-kikuchan98@gmail.com
