If the "test->highmem = alloc_pages()" allocation fails then calling
__free_pages(test->highmem) will result in a NULL dereference. Also
change the error code to -ENOMEM instead of returning success.
Fixes: 2661081f5a ("mmc_test: highmem tests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8c90be28-67b4-4b0d-a105-034dc72a0b31@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
iounmap() on x86 occasionally fails to unmap because the provided valid
ioremap address is not below high_memory. It turned out that this
happens due to KASLR.
KASLR uses the full address space between PAGE_OFFSET and vaddr_end to
randomize the starting points of the direct map, vmalloc and vmemmap
regions. It thereby limits the size of the direct map by using the
installed memory size plus an extra configurable margin for hot-plug
memory. This limitation is done to gain more randomization space
because otherwise only the holes between the direct map, vmalloc,
vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel, so
the memory hot-plug and resource management related code paths still
operate under the assumption that the available address space can be
determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of the
direct map and if unlucky this address is in the vmalloc space, which
causes high_memory to become greater than VMALLOC_START and consequently
causes iounmap() to fail for valid ioremap addresses.
MAX_PHYSMEM_BITS cannot be changed for that because the randomization
does not align with address bit boundaries and there are other places
which actually require to know the maximum number of address bits. All
remaining usage sites of MAX_PHYSMEM_BITS have been analyzed and found
to be correct.
Cure this by exposing the end of the direct map via PHYSMEM_END and use
that for the memory hot-plug and resource management related places
instead of relying on MAX_PHYSMEM_BITS. In the KASLR case PHYSMEM_END
maps to a variable which is initialized by the KASLR initialization and
otherwise it is based on MAX_PHYSMEM_BITS as before.
To prevent future hickups add a check into add_pages() to catch callers
trying to add memory above PHYSMEM_END.
Fixes: 0483e1fa6e ("x86/mm: Implement ASLR for kernel memory regions")
Reported-by: Max Ramanouski <max8rr8@gmail.com>
Reported-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-By: Max Ramanouski <max8rr8@gmail.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed6soy3z.ffs@tglx
Fix a race condition if the clock provider comes up after mmc is probed,
this causes mmc to fail without retrying.
When given the DEFER error from the clk source, pass it on up the chain.
Fixes: f90a0612f0 ("mmc: dw_mmc: lookup for optional biu and ciu clocks")
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240811212212.123255-1-ben.whitten@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
GRO code checks for matching layer 2 headers to see, if packet belongs
to the same flow and because ip6 tunnel set dev->hard_header_len
this check fails in cases, where it shouldn't. To fix this don't
set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c
does.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When only the last resource is invalid, tpmi_sst_dev_add() is returing
error even if there are other valid resources before. This function
should return error when there are no valid resources.
Here tpmi_sst_dev_add() is returning "ret" variable. But this "ret"
variable contains the failure status of last call to sst_main(), which
failed for the invalid resource. But there may be other valid resources
before the last entry.
To address this, do not update "ret" variable for sst_main() return
status.
If there are no valid resources, it is already checked for by !inst
below the loop and -ENODEV is returned.
Fixes: 9d1d36268f ("platform/x86: ISST: Support partitioned systems")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org # 6.10+
Link: https://lore.kernel.org/r/20240816163626.415762-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
revert commit 4c905f6740 ("netfilter: nf_tables: initialize registers in
nft_do_chain()").
Previous patch makes sure that loads from uninitialized registers are
detected from the control plane. in this case rule blob auto-zeroes
registers. Thus the explicit zeroing is not needed anymore.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reject rules where a load occurs from a register that has not seen a store
early in the same rule.
commit 4c905f6740 ("netfilter: nf_tables: initialize registers in
nft_do_chain()")
had to add a unconditional memset to the nftables register space to avoid
leaking stack information to userspace.
This memset shows up in benchmarks. After this change, this commit can
be reverted again.
Note that this breaks userspace compatibility, because theoretically
you can do
rule 1: reg2 := meta load iif, reg2 == 1 jump ...
rule 2: reg2 == 2 jump ... // read access with no store in this rule
... after this change this is rejected.
Neither nftables nor iptables-nft generate such rules, each rule is
always standalone.
This resuts in a small increase of nft_ctx structure by sizeof(long).
To cope with hypothetical rulesets like the example above one could emit
on-demand "reg[x] = 0" store when generating the datapath blob in
nf_tables_commit_chain_prepare().
A patch that does this is linked to below.
For now, lets disable this. In nf_tables, a rule is the smallest
unit that can be replaced from userspace, i.e. a hypothetical ruleset
that relies on earlier initialisations of registers can't be changed
at will as register usage would need to be coordinated.
Link: https://lore.kernel.org/netfilter-devel/20240627135330.17039-4-fw@strlen.de/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_counter_reset() resets the counter by subtracting the previously
retrieved value from the counter. This is a write operation on the
counter and as such it requires to be performed with a write sequence of
nft_counter_seq to serialize against its possible reader.
Update the packets/ bytes within write-sequence of nft_counter_seq.
Fixes: d84701ecbc ("netfilter: nft_counter: rework atomic dump and reset")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The sequence counter nft_counter_seq is a per-CPU counter. There is no
lock associated with it. nft_counter_do_eval() is using the same counter
and disables BH which suggest that it can be invoked from a softirq.
This in turn means that nft_counter_offload_stats(), which disables only
preemption, can be interrupted by nft_counter_do_eval() leading to two
writer for one seqcount_t.
This can lead to loosing stats or reading statistics while they are
updated.
Disable BH during stats update in nft_counter_offload_stats() to ensure
one writer at a time.
Fixes: b72920f6e4 ("netfilter: nftables: counter hardware offload support")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert arm32 to use the arch_cpu_is_hotpluggable() helper rather than
arch_register_cpu().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Currently, almost all architectures have switched to GENERIC_CPU_DEVICES,
except for arm32. Also switch over to GENERIC_CPU_DEVICES, and provide an
arch_register_cpu() that populates the hotpluggable flag for arm32.
The struct cpu in struct cpuinfo_arm is never used directly, remove
it to use the one GENERIC_CPU_DEVICES provides.
This also has the effect of moving the registration of CPUs from subsys to
driver core initialisation, prior to any initcalls running.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The code in early_paging_init is directly masking off bits
8, 9, 10 and 11 to temporarily disable caching of the translation
tables. There is some exlanations in the comment, but use some
defines instead of magic numbers so ut becomes more evident
what is going on.
Change the type of the register to u32 since these are indeed
unsigned 32bit registers, and use a temporary variable instead
of baking too much into the inline assembly call to increase
readability.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Wen Gu says:
====================
net/smc: introduce ringbufs usage statistics
Currently, we have histograms that show the sizes of ringbufs that ever
used by SMC connections. However, they are always incremental and since
SMC allows the reuse of ringbufs, we cannot know the actual amount of
ringbufs being allocated or actively used.
So this patch set introduces statistics for the amount of ringbufs that
actually allocated by link group and actively used by connections of a
certain net namespace, so that we can react based on these memory usage
information, e.g. active fallback to TCP.
With appropriate adaptations of smc-tools, we can obtain these ringbufs
usage information:
$ smcr -d linkgroup
LG-ID : 00000500
LG-Role : SERV
LG-Type : ASYML
VLAN : 0
PNET-ID :
Version : 1
Conns : 0
Sndbuf : 12910592 B <-
RMB : 12910592 B <-
or
$ smcr -d stats
[...]
RX Stats
Data transmitted (Bytes) 869225943 (869.2M)
Total requests 18494479
Buffer usage (Bytes) 12910592 (12.31M) <-
[...]
TX Stats
Data transmitted (Bytes) 12760884405 (12.76G)
Total requests 36988338
Buffer usage (Bytes) 12910592 (12.31M) <-
[...]
[...]
Change log:
v3->v2
- use new helper nla_put_uint() instead of nla_put_u64_64bit().
v2->v1
https://lore.kernel.org/r/20240807075939.57882-1-guwen@linux.alibaba.com/
- remove inline keyword in .c files.
- use local variable in macros to avoid potential side effects.
v1
https://lore.kernel.org/r/20240805090551.80786-1-guwen@linux.alibaba.com/
====================
Link: https://patch.msgid.link/20240814130827.73321-1-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer size histograms in smc_stats, namely rx/tx_rmbsize, record
the sizes of ringbufs for all connections that have ever appeared in
the net namespace. They are incremental and we cannot know the actual
ringbufs usage from these. So here introduces statistics for current
ringbufs usage of existing smc connections in the net namespace into
smc_stats, it will be incremented when new connection uses a ringbuf
and decremented when the ringbuf is unused.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently we have the statistics on sndbuf/RMB sizes of all connections
that have ever been on the link group, namely smc_stats_memsize. However
these statistics are incremental and since the ringbufs of link group
are allowed to be reused, we cannot know the actual allocated buffers
through these. So here introduces the statistic on actual allocated
ringbufs of the link group, it will be incremented when a new ringbuf is
added into buf_list and decremented when it is deleted from buf_list.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816150931.142208-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816150931.142208-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The sparse tool complains as follows:
drivers/pmdomain/apple/pmgr-pwrstate.c:180:32: warning:
symbol 'apple_pmgr_reset_ops' was not declared. Should it be static:
This symbol is not used outside of pmgr-pwrstate.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240819115956.3884847-1-ruanjinjie@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the devres-enabled version of dev_pm_domain_attach|detach_list.
If client drivers use devm_pm_domain_attach_list() to attach the PM domains,
devm_pm_domain_detach_list() will be invoked implicitly during remove phase.
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Link: https://lore.kernel.org/r/1724063350-11993-2-git-send-email-quic_dikshita@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.12.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
FS_IOC_GETFSSYSFSPATH ioctl expects sysfs sub-path of a filesystem, the
format can be "$FSTYP/$SYSFS_IDENTIFIER" under /sys/fs, it can helps to
standardizes exporting sysfs datas across filesystems.
This patch wires up FS_IOC_GETFSSYSFSPATH for zonefs, it will output
"zonefs/<dev>".
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices".
Reported-by: Serge Semin <fancer.lancer@gmail.com>
Closes: https://lore.kernel.org/linux-mips/6szkkqxpsw26zajwysdrwplpjvhl5abpnmxgu2xuj3dkzjnvsf@4daqrz4mf44k/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is no need to have and export the count variable for the array
in question. Instead, make it NULL-terminated.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For the sake of unification and easier maintenance replace
swnode_format_propname() call with for_each_gpio_property_name()
for-loop.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Instead of the spreading simlar code over the file, introduce a helper.
It also enforces the nargs validation for all GPIO software node APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Introduce a helper macro for_each_gpio_property_name().
With that in place, update users. This, in particular,
will help making the following simplifications easier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Enable confirmed-working CAN-FD channels 0 and 1 on the Gray Hawk Single
development board:
- Channel 0 uses an NXP TJR1443AT CAN transceiver, which must be
enabled through a GPIO,
- Channels 1-3 use Microchip MCP2558FD-H/SN CAN transceivers, which do
not need explicit description, but channels 2-3 do not seem to work.
Inspired by a patch for Gray Hawk in the BSP by Duy Nguyen.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/7c2a06b7abec4ce1025761003ccdbce559789708.1722519717.git.geert+renesas@glider.be
Add an skb helper function to copy a range of bytes from within
an existing skb_seq_state.
Signed-off-by: Christian Hopps <chopps@labn.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Integrity Policy Enforcement (IPE) is an LSM that provides an
complimentary approach to Mandatory Access Control than existing LSMs
today.
Existing LSMs have centered around the concept of access to a resource
should be controlled by the current user's credentials. IPE's approach,
is that access to a resource should be controlled by the system's trust
of a current resource.
The basis of this approach is defining a global policy to specify which
resource can be trusted.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
We don't have sufficient information to debug:
https://github.com/koverstreet/bcachefs/issues/726
- print out durability of extent ptrs, when non default
- print the number of replicas we need in data_update_to_text()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
These are never implenmented since commit b691b1116e ("net/mlx5: Implement
devlink port function cmds to control ipsec_packet").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240816101550.881844-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f13697cc7a ("gve: Switch to config-aware queue allocation")
convert this function to gve_rx_alloc_rings_gqi().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240816101906.882743-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous attempt fixed the build on debian:experimental-x-mipsel,
but when building on a larger set of containers I noticed it broke the
build on some other 32-bit architectures such as:
42 7.87 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
builtin-daemon.c: In function 'cmd_session_list':
builtin-daemon.c:692:16: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=]
fprintf(out, "%c%" PRIu64,
^~~~~
builtin-daemon.c:694:13:
csv_sep, (curr - daemon->start) / 60);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from builtin-daemon.c:3:0:
/usr/arm-linux-gnueabihf/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
So lets cast that time_t (32-bit/64-bit) to uint64_t to make sure it
builds everywhere.
Fixes: 4bbe600293 ("perf daemon: Fix the build on 32-bit architectures")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZsPmldtJ0D9Cua9_@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
