Add the __init attribute to the mpic_msi_init() function. It is only
called from the device initializer, and so can be dropped after boot is
complete.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Drop the msi_doorbell_end() function and related constants, it is not
used anymore.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Drop IPI_DOORBELL_START since it is not used and rename IPI_DOORBELL_END
to IPI_DOORBELL_NR.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this.
Fixes: 2b1f6278d7 ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com
With the previous cleanups, the last remaining user of __i915_printk()
is i915_probe_error(). Switch that to use drm_dbg() and drm_err()
instead, dropping the request to report bugs in the few remaining
specific cases.
It's not common for drivers to log bug filing requests to begin with,
but these cases are in init, which is most likely to be tested in CI and
least likely to be hit by end users anyway.
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be9baeab281f75999e96cc7ad1c06c6680494bc1.1722951405.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
aren't considered necessary for earlier kernels. 5 are MM and 4 are
non-MM. No identifiable theme here - please see the individual changelogs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZrQhyAAKCRDdBJ7gKXxA
jvLLAP46sQ/HspAbx+5JoeKBTiX6XW4Hfd+MAk++EaTAyAhnxQD+Mfq7rPOIHm/G
wiXPVvLO8FEx0lbq06rnXvdotaWFrQg=
=mlE4
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes. Five are cc:stable, the others either pertain to
post-6.10 material or aren't considered necessary for earlier kernels.
Five are MM and four are non-MM. No identifiable theme here - please
see the individual changelogs"
* tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
mailmap: update entry for David Heidelberg
memcg: protect concurrent access to mem_cgroup_idr
mm: shmem: fix incorrect aligned index when checking conflicts
mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
mm: list_lru: fix UAF for memory cgroup
kcov: properly check for softirq context
MAINTAINERS: Update LTP members and web
selftests: mm: add s390 to ARCH check
i915_report_error() presently acts as a wrapper for __i915_printk(). In
practice, it would be better to use drm level error reporting wherever
possible, so replace all uses of i915_report_error() with the equivalent
drm_err() call. These cases are not worth having a dedicated wrapper to
also print bug reporting info. Replacing the calls leaves
i915_report_error() with no users, so remove it.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/19eab020c57c0fa45acacf4e4a8077e57cd4d561.1722951405.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 3e0bf9fde2 ("perf pmu: Restore full PMU name wildcard
support") adds a test case "PMU cmdline match" that covers PMU name
wildcard support provided by function perf_pmu__match().
The test works with a wide range of supported combinations of PMU name
matching but omits the case that if the perf_pmu__match() cannot match
the PMU name to the wildcard, it tries to match its alias. However, this
variable is not set up, causing the test case to fail when run with
subprocesses or to segfault if run as a single process.
./perf test -vv 9
9: Sysfs PMU tests :
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : FAILED!
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
Segmentation fault (core dumped)
Initialize the PMU alias to null for all tests of perf_pmu__match()
as this functionality is not being tested and the alias matching works
exactly the same as the matching of the PMU name.
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : Ok
Fixes: 3e0bf9fde2 ("perf pmu: Restore full PMU name wildcard support")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Link: https://lore.kernel.org/r/20240808103749.9356-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new CEC_MSG_FL_REPLY_VENDOR_ID flag only makes sense in combination
with CEC_MSG_VENDOR_COMMAND_WITH_ID. So rather than reporting an error
if that flag is set with another command, just clear the flag instead.
Only keep the message length check, since otherwise the flag would not
make sense.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cec_msg_set_reply_to() helper function never zeroed the
struct cec_msg flags field, this can cause unexpected behavior
if flags was uninitialized to begin with.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0dbacebede ("[media] cec: move the CEC framework out of staging and to media")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 2b3d047870 ("unicode: Add utf8-data module") changed the
database file from 'utf8data.h' to 'utf8data.c' to build separate
module, but it seems forgot to update Documentation/dontdiff. Remove
'utf8data.h' and add 'utf8data.c'.
Signed-off-by: ganjie <ganjie5@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240808085707.3235019-1-guoxuenan@huawei.com
In 'perf ftrace profile sleep 0.1' we know that we'll have an specific
kernel function that will take a bit more than 0.1 seconds and will take
place just one time, so we can add a check for that so that we validate
more than just the presence of some functions in the profile.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/ZrTBo7KACZeuCyLj@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The die_get_typename() would resolve typedef and get to the original
type. But sometimes the original type is a struct without name and it
makes the output confusing and hard to read.
This is a diff of perf report -s type before and after the change.
New types such as atomic{,64}_t and sigset_t appeared and the portion
of unnamed struct was reduced. Also u32, u64 and size_t were splitted
from the base types.
--- b 2024-08-01 17:02:34.307809952 -0700
+++ a 2024-08-07 14:17:05.245853999 -0700
- 2.40% long unsigned int
+ 2.26% long unsigned int
- 1.56% unsigned int
+ 1.27% unsigned int
- 0.98% struct
- 0.79% long long unsigned int
+ 0.58% long long unsigned int
+ 0.36% struct
+ 0.27% atomic64_t
+ 0.22% u32
+ 0.21% u64
+ 0.19% atomic_t
+ 0.13% size_t
- 0.08% struct seqcount_spinlock
+ 0.08% seqcount_spinlock_t
+ 0.08% sigset_t
+ 0.08% __poll_t
Let's use the typedef name directly and the resolved to get the size of
the type.
Committer testing:
root@x1:~# diff -u before after | head -30
--- before 2024-08-08 09:35:13.917325041 -0300
+++ after 2024-08-08 09:37:35.312257905 -0300
@@ -10,25 +10,27 @@
# ........ .........
#
79.40% (unknown)
- 2.28% union
1.96% (stack operation)
- 1.24% struct
+ 1.87% pthread_mutex_t
0.99% u32[]
- 0.92% unsigned int
0.77% struct task_struct
+ 0.75% U32
0.75% struct pcpu_hot
0.63% struct qspinlock
+ 0.61% atomic_t
0.59% struct list_head
- 0.58% int
0.53% struct cfs_rq
0.51% BYTE*
- 0.48% unsigned char
+ 0.48% BYTE
0.48% long unsigned int
0.46% struct rq
0.41% struct worker
0.41% struct memcg_vmstats_percpu
+ 0.41% pthread_cond_t
0.37% _Bool
+ 0.36% int
root@x1:~#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240807223129.1738004-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In find_data_type(), it creates and deletes a debug info whenver it
tries to find data type for a sample. This is inefficient and it most
likely accesses the same binary again and again.
Let's add a single entry cache the debug info structure for the last DSO.
Depending on sample data, it usually gives me 2~3x (and sometimes more)
speed ups.
Note that this will introduce a little difference in the output due to
the order of checking stack operations. It used to check the stack ops
before checking the availability of debug info but I moved it after the
symbol check. So it'll report stack operations in DSOs without debug
info as unknown. But I think it's ok and better to have the checking
near the caching logic.
Committer testing:
root@x1:~# perf mem record -a sleep 5s
root@x1:~# perf evlist
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
dummy:u
root@x1:~# diff -u before after
--- before 2024-08-08 09:33:53.880780784 -0300
+++ after 2024-08-08 09:35:13.917325041 -0300
@@ -81,8 +81,8 @@
# Overhead Data Type
# ........ .........
#
- 55.43% (unknown)
- 11.61% (stack operation)
+ 55.56% (unknown)
+ 11.48% (stack operation)
4.93% struct pcpu_hot
3.26% unsigned int
2.48% struct
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240805234648.1453689-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
iter_finish_branch_entry() doesn't put the branch_info from/to map
elements creating memory leaks. This can be seen with:
```
$ perf record -e cycles -b perf test -w noploop
$ perf report -D
...
Direct leak of 984344 byte(s) in 123043 object(s) allocated from:
#0 0x7fb2654f3bd7 in malloc libsanitizer/asan/asan_malloc_linux.cpp:69
#1 0x564d3400d10b in map__get util/map.h:186
#2 0x564d3400d10b in ip__resolve_ams util/machine.c:1981
#3 0x564d34014d81 in sample__resolve_bstack util/machine.c:2151
#4 0x564d34094790 in iter_prepare_branch_entry util/hist.c:898
#5 0x564d34098fa4 in hist_entry_iter__add util/hist.c:1238
#6 0x564d33d1f0c7 in process_sample_event tools/perf/builtin-report.c:334
#7 0x564d34031eb7 in perf_session__deliver_event util/session.c:1655
#8 0x564d3403ba52 in do_flush util/ordered-events.c:245
#9 0x564d3403ba52 in __ordered_events__flush util/ordered-events.c:324
#10 0x564d3402d32e in perf_session__process_user_event util/session.c:1708
#11 0x564d34032480 in perf_session__process_event util/session.c:1877
#12 0x564d340336ad in reader__read_event util/session.c:2399
#13 0x564d34033fdc in reader__process_events util/session.c:2448
#14 0x564d34033fdc in __perf_session__process_events util/session.c:2495
#15 0x564d34033fdc in perf_session__process_events util/session.c:2661
#16 0x564d33d27113 in __cmd_report tools/perf/builtin-report.c:1065
#17 0x564d33d27113 in cmd_report tools/perf/builtin-report.c:1805
#18 0x564d33e0ccb7 in run_builtin tools/perf/perf.c:350
#19 0x564d33e0d45e in handle_internal_command tools/perf/perf.c:403
#20 0x564d33cdd827 in run_argv tools/perf/perf.c:447
#21 0x564d33cdd827 in main tools/perf/perf.c:561
...
```
Clearing up the map_symbols properly creates maps reference count
issues so resolve those. Resolving this issue doesn't improve peak
heap consumption for the test above.
Committer testing:
$ sudo dnf install libasan
$ make -k CORESIGHT=1 EXTRA_CFLAGS="-fsanitize=address" CC=clang O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240807065136.1039977-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling VPC commands consists of several VPCW and VPCR ACPI calls.
These calls and their results can get mixed up if they are called
simultaneously from different threads, like acpi notify handler,
sysfs, debugfs, notification chain.
The commit e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") made the race issues much worse than before it but some
races were possible even before that commit.
Add a mutex to synchronize VPC commands.
Fixes: e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs")
Fixes: e82882cdd2 ("platform/x86: Add driver for Yoga Tablet Mode switch")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/f26782fa1194ad11ed5d9ba121a804e59b58b026.1721898747.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some models need to trigger the EC after each YMC event for the yoga
mode control to work properly. EC triggering consist of a VPC call from
the lenovo-ymc module. Except for this, all VPC calls are in the
ideapad-laptop module.
Since ideapad-laptop has a notification chain, a new YMC_EVENT action
can be added and triggered from the lenovo-ymc module. Then the
ideapad-laptop can trigger the EC.
If the triggering is in the ideapad-laptop module, then the ec_trigger
module parameter should be there as well.
Move the ymc_trigger_ec functionality and the ec_trigger module
parameter to the ideapad-laptop module.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/d980ab3ac32b5e554f456b0ff17279bfdbe2a203.1721898747.git.soyer@irl.hu
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are several cases where a notification chain can simplify Lenovo
WMI drivers.
Add a generic notification chain into ideapad-laptop.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/c5a43efae8a32bd034c3d19c0a686941347575a7.1721898747.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If the Ambient Light Sensor (ALS) is disabled, the current code in the PMF
driver does not query for Human Presence Detection (HPD) data in
amd_pmf_get_sensor_info(). As a result, stale HPD data is used by PMF-TA
to evaluate policy conditions, leading to unexpected behavior in the policy
output actions.
To resolve this issue, modify the PMF driver to query HPD data
independently of ALS.
Since user_present is a boolean, modify the current code to return true if
the user is present and false if the user is away or if the sensor is not
detected, and report this status to the PMF TA firmware accordingly.
With this change, amd_pmf_get_sensor_info() now returns void instead of
int.
Fixes: cedecdba60 ("platform/x86/amd/pmf: Get ambient light information from AMD SFH driver")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240730142316.3846259-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is is no point in doing the perf_pmu_disable() dance just to do
nothing. This happens for ctx_sched_out(.type = EVENT_TIME) for
instance.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807115550.392851915@infradead.org
Many of the the context reschedule users are of the form:
ctx_sched_out(.type = EVENT_TIME);
... modify context
ctx_resched();
With the idea that the whole reschedule happens with a single
time-stamp, rather than with each ctx_sched_out() advancing time and
ctx_sched_in() re-starting time, creating a non-atomic experience.
However, Kan noticed that since this completely stops time, it
actually looses a bit of time between the stop and start. Worse, now
that we can do partial (per PMU) reschedules, the PMUs that are not
scheduled out still observe the time glitch.
Replace this with:
ctx_time_freeze();
... modify context
ctx_resched();
With the assumption that this happens in a perf_ctx_lock() /
perf_ctx_unlock() pair.
The new ctx_time_freeze() will update time and sets EVENT_FROZEN, and
ensures EVENT_TIME and EVENT_FROZEN remain set, this avoids
perf_event_time_now() from observing a time wobble from not seeing
EVENT_TIME for a little while.
Additionally, this avoids loosing time between
ctx_sched_out(EVENT_TIME) and ctx_sched_in(), which would re-set the
timestamp.
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807115550.250637571@infradead.org
All the event_function/@func call context already uses perf_ctx_lock()
except for the !ctx->is_active case. Make it all consistent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807115550.138301094@infradead.org
The context time update code is repeated verbatim a few times.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807115550.031212518@infradead.org
Currently re-scheduling a context will reschedule all active PMUs for
that context, even if it is known only a single event is added.
Namhyung reported that changing this to only reschedule the affected
PMU when possible provides significant performance gains under certain
conditions.
Therefore, allow partial context reschedules for a specific PMU, that
of the event modified.
While the patch looks somewhat noisy, it mostly just propagates a new
@pmu argument through the callchain and modifies the epc loop to only
pick the 'epc->pmu == @pmu' case.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807115549.920950699@infradead.org
'cgr_comp' has been unused since
commit 96f413f476 ("soc/fsl/qbman: fix issue in
qman_delete_cgr_safe()").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240528231123.136664-1-linux@treblig.org
The "fsl,weim-cs-timing" property is an array, but the constraints in
the if/then schema are for a matrix. That worked fine when all
properties were decoded into a matrix, but now dtschema decodes
properties into scalars and arrays based on their type.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240807225959.3343093-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
By moving the pfn calculation to the set_address_limits()
function we improve code readability. This way,
set_address_limits() is responsible for calculating all memory
mapping paramenters: "start", "end" and "pfn".
This suggestion from Jonathan was made during the review of
commit 8bdd9ef7e9 ("drm/i915/gem: Fix Virtual Memory mapping
boundaries calculation"), which I liked, but it got lost on the
way.
Suggested-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807104553.481763-1-andi.shyti@linux.intel.com
In Exynos7885 (and seemingly all modern Exynos SoCs) all PLLs have a MUX
attached to them controlled by bit 4 in the PLL's CON0 register.
These MUXes can select between OSCCLK or the PLL's output, essentially
making the PLL bypassable.
These weren't modeled in the driver because the vendor provided drivers
didn't model it properly, instead setting them when updating the PMS
values.
Not having them modeled didn't cause any problems in this case, since
these MUXes were set to the PLL's output by default, but this is not the
case everywhere in this SoC.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-6-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Update CLKS_NR_FSYS to the proper value after a fix in DT bindings.
This should always be the last clock in a CMU + 1.
Fixes: cd268e309c ("dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS")
Cc: stable@vger.kernel.org
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-5-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The call of usb_set_interface() and a delay are superfluous when the
device has been already disconnected. Add a disconnection check
before doing it.
Link: https://patch.msgid.link/20240808091522.31415-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current MIDI input flush on HDSP and HDSPM drivers relies on the
hardware reporting the right value. If the hardware doesn't give the
proper value but returns -1, it may be stuck at an infinite loop.
Add a counter and break if the loop is unexpectedly too long.
Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size.
Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At the code refactoring of USB-audio quirk handling, I assumed that
the quirk entries of Stanton ScratchAmp devices were only about the
device name, and moved them completely into the rename table.
But it seems that the device requires the quirk entry so that it's
probed by the driver itself.
This re-adds back the quirk entries of ScratchAmp, but in a
minimalistic manner.
Fixes: 5436f59bc5 ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Link: https://patch.msgid.link/20240808081803.22300-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct snd_sof_pcm` ends in a flexible-array member through
`struct snd_soc_tplg_pcm` -> `struct snd_soc_tplg_private`.
Whith this, fix the following warnings:
sound/soc/sof/sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
./include/trace/events/../../../sound/soc/sof/sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/amd/../sof/amd/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/amd/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/intel/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/mediatek/mt8186/../../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
sound/soc/sof/mediatek/mt8195/../../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZrDvt6eyeFyajq6l@cute
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ZSC Control register programming sequence for ACP D0 and D3 state
transitions for ACP7.0 onwards. This will allow ACP to enter low power
state when ACP enters D3 state. When ACP enters D0 State, ZSC control
should be disabled.
Tested-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240807085154.1987681-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As module device table added for AMD SoundWire machine driver MODULE_ALIAS
is not required. Remove MODULE_ALIAS for AMD SoundWire machine driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240807050846.1616725-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that regmap_read_bypassed() has been added to the kernel it is
preferable to wake the device with a read rather than a write as the
utility function can be called at a time before the device has been
identified.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240807142715.47077-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Exynos7885 SoC has a DWC3 USB Controller with Exynos USB PHY which in
theory supports USB3 SuperSpeed, but is only used as USB2 in all known
devices.
These, of course, need some clocks.
Add indices for these clocks.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-4-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The numbering in Exynos7885's FSYS CMU bindings has 4 duplicated by
accident, with the rest of the bindings continuing with 5.
Fix this by moving CLK_MOUT_FSYS_USB30DRD_USER to the end as 11.
Since CLK_MOUT_FSYS_USB30DRD_USER is not used in any device tree as of
now, and there are no other clocks affected (maybe apart from
CLK_MOUT_FSYS_MMC_SDIO_USER which the number was shared with, also not
used in a device tree), this is the least impactful way to solve this
problem.
Fixes: cd268e309c ("dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS")
Cc: stable@vger.kernel.org
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Building with Sparse enabled prints this warning for cpu_to_le16()
calls:
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype]
got restricted __le16 [usertype]
And this warning for le16_to_cpu() calls:
warning: cast to restricted __le16
Declare the target buffer as __le16 to fix both warnings.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Acked-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240716161725.41408-2-jose.exposito89@gmail.com
