On Sophgo CV18XX platform, threshold strength of schmitt trigger can
be configured. As this standard property is already supported by the
common pinconf code. Add "input-schmitt-microvolt" property in
pincfg-node.yaml so that other platforms requiring such feature can
make use of this property.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/IA1PR20MB4953C71C87FD150D2E64FF41BBAC2@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the Mobileye EyeQ5 pin controller driver. It belongs to a syscon
region called OLB and gets spawned as auxiliary device to the platform
driver for clock.
Existing pins and their function live statically in the driver code
rather than in the devicetree, see compatible match data.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/20240730-mbly-pinctrl-v2-2-d470f64e0395@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Switch from one sub-node per functionality in the system-controller to a
single node representing the entire OLB instance. This is the
recommended approach for controllers handling many different
functionalities; it is a single controller and should be represented by
a single devicetree node.
The pinctrl bindings is removed and all properties will be described by:
soc/mobileye/mobileye,eyeq5-olb.yaml
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/20240730-mbly-pinctrl-v2-1-d470f64e0395@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
One core change that reverts the double message print patch in sd.c
(it was causing regressions on embedded systems). The rest are driver
fixes in ufs, mpt3sas and mpi3mr.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZq6lOSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbahAQCAOzIU
tVtzYqnIaD3ACKJshPYHHUfq89W5tAlU/N3dVwEAp2h3iZV3BNHhTtzEsFwf8giX
Q/srm1jHTyviB/rM1Yw=
=qK7K
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core change that reverts the double message print patch in sd.c
(it was causing regressions on embedded systems).
The rest are driver fixes in ufs, mpt3sas and mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: exynos: Don't resume FMP when crypto support is disabled
scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES
scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONES
scsi: ufs: core: Do not set link to OFF state while waking up from hibernation
scsi: Revert "scsi: sd: Do not repeat the starting disk message"
scsi: ufs: core: Fix deadlock during RTC update
scsi: ufs: core: Bypass quick recovery if force reset is needed
scsi: ufs: core: Check LSDBS cap when !mcq
Kuniyuki Iwashima says:
====================
net: Random cleanup for netns initialisation.
patch 1 & 2 suppress unwanted memory allocation for net->gen->ptr[].
patch 3 ~ 6 move part of netns initialisation to prenet_init() that
do not require pernet_ops_rwsem.
v2:
patch 1 : Removed Fixes: tag
patch 2 : Use XOR for WARN_ON()
v1: https://lore.kernel.org/netdev/20240729210801.16196-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 7c3f1875c6 ("net: move somaxconn init from sysctl code")
introduced net_defaults_ops to make sure that net.core sysctl knobs
are always initialised even if CONFIG_SYSCTL is disabled.
Such operations better fit preinit_net() added for a similar purpose
by commit 6e77a5a4af ("net: initialize net->notrefcnt_tracker earlier").
Let's initialise the sysctl defaults in preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most initialisations in setup_net() do not require pernet_ops_rwsem
and can be moved to preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When initialising the root netns, we call preinit_net() under
pernet_ops_rwsem.
However, the operations in preinit_net() do not require pernet_ops_rwsem.
Also, we don't hold it for preinit_net() when initialising non-root netns.
To be consistent, let's call preinit_net() without pernet_ops_rwsem in
net_ns_init().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When initialising the root netns, we set net->passive in setup_net().
However, we do it twice for non-root netns in copy_net_ns() and
setup_net().
This is because we could bypass setup_net() in copy_net_ns() if
down_read_killable() fails.
preinit_net() is a better place to put such an operation.
Let's initialise net->passive in preinit_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can allocate per-netns memory for struct pernet_operations by specifying
id and size.
register_pernet_operations() assigns an id to pernet_operations and later
ops_init() allocates the specified size of memory as net->gen->ptr[id].
If id is missing, no memory is allocated. If size is not specified,
pernet_operations just wastes an entry of net->gen->ptr[] for every netns.
net_generic is available only when both id and size are specified, so let's
ensure that.
While we are at it, we add const to both fields.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and
ppp parts") converted net->gen->ptr[pppol2tp_net_id] in l2tp_ppp.c to
net->gen->ptr[l2tp_net_id] in l2tp_core.c.
Now the leftover wastes one entry of net->gen->ptr[] in each netns.
Let's avoid the unwanted allocation.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Fix memory leak when corruption is detected during scrubbing parent
pointers.
* Allow SECURE namespace xattrs to use reserved block pool to in order to
prevent ENOSPC.
* Save stack space by passing tracepoint's char array to file_path() instead
of another stack variable.
* Remove unused parameter in macro XFS_DQUOT_LOGRES.
* Replace comma with semicolon in a couple of places.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZqoucAAKCRAH7y4RirJu
9LlvAP9J85bGKmcBcy0SLbuqatg6aut/ev/7+qI0FHdaRp1mYQEA+ryJarLdl8kM
8EqMUwDF3CzK3o88hrTMu6lT5F6Mpw4=
=CCxD
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix memory leak when corruption is detected during scrubbing parent
pointers
- Allow SECURE namespace xattrs to use reserved block pool to in order
to prevent ENOSPC
- Save stack space by passing tracepoint's char array to file_path()
instead of another stack variable
- Remove unused parameter in macro XFS_DQUOT_LOGRES
- Replace comma with semicolon in a couple of places
* tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: convert comma to semicolon
xfs: convert comma to semicolon
xfs: remove unused parameter in macro XFS_DQUOT_LOGRES
xfs: fix file_path handling in tracepoints
xfs: allow SECURE namespace xattrs to use reserved block pool
xfs: fix a memory leak
Remove IRQF_TRIGGER_FALLING flag from irq request, this should come from
the platform firmware and should not be hard-coded into the driver.
Add IRQF_ONESHOT flag to the irq request, the interrupt should not be
re-activated in interrupt context, it should be done only after the
device irq handler run.
Fixes: a9306887eb ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviwed-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20240731140657.88265-1-francesco@dolcini.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The runtime constants linker script depended on documented linker
behavior [1]:
"If an output section’s name is the same as the input section’s name
and is representable as a C identifier, then the linker will
automatically PROVIDE two symbols: __start_SECNAME and __stop_SECNAME,
where SECNAME is the name of the section. These indicate the start
address and end address of the output section respectively"
to just automatically define the symbol names for the bounds of the
runtime constant arrays.
It turns out that this isn't actually something we can rely on, with old
linkers not generating these automatic symbols. It looks to have been
introduced in binutils-2.29 back in 2017, and we still support building
with versions all the way back to binutils-2.25 (from 2015).
And yes, Oleg actually seems to be using such ancient versions of
binutils.
So instead of depending on the implicit symbols from "section names
match and are representable C identifiers", just do this all manually.
It's not like it causes us any extra pain, we already have to do that
for all the other sections that we use that often have special
characters in them.
Reported-and-tested-by: Oleg Nesterov <oleg@redhat.com>
Link: https://sourceware.org/binutils/docs/ld/Input-Section-Example.html [1]
Link: https://lore.kernel.org/all/20240802114518.GA20924@redhat.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the scale_type is IIO_VAL_INT_PLUS_MICRO or IIO_VAL_INT_PLUS_NANO
the scale passed as argument is only applied to the fractional part of
the value. Fix it by also multiplying the integer part by the scale
provided.
Fixes: 48e44ce0f8 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240730-iio-fix-scale-v1-1-6246638c8daa@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
During setup the st->adc_control is 0, which corresponds to a continuous
conversion mode. The reset value for channel 1 is to enable it. The
combined effect of these two is that the ADC will start conversions for
channel 1 without them being read.
This is not neccessarily a problem, but it is an unexpected behavior.
Set the ADC state to idle during setup to avoid this.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-4-46a76aa4b9be@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_init_config_vref() function writes the AD7124_ADC_CONTROL
register for each channel that is configured to use the internal
reference.
The ad7124_write_config()function performs 7 SPI transfers for
configuring 2 registers: config_x and filter_x.
Reduce the number of SPI transfers:
-during the probe by only setting the st->adc_control value in
ad7124_init_config_vref() and writing to the device only at the end of
ad7124_setup().
-in ad7124_write_config() by grouping writes to the same register.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-3-46a76aa4b9be@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_find_similar_live_cfg() computes the compare size by
substracting the address of the cfg struct from the address of the live
field. Because the live field is the first field in the struct, the
result is 0.
Also, the memcmp() call is made from the start of the cfg struct, which
includes the live and cfg_slot fields, which are not relevant for the
comparison.
Fix by grouping the relevant fields with struct_group() and use the
size of the group to compute the compare size; make the memcmp() call
from the address of the group.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-2-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_soft_reset() function has the assumption that the chip will
assert the "power-on reset" bit in the STATUS register after a software
reset without any delay. The POR bit =0 is used to check if the chip
initialization is done.
A chip ID mismatch probe error appears intermittently when the probe
continues too soon and the ID register does not contain the expected
value.
Fix by adding a 200us delay after the software reset command is issued.
Fixes: b3af341bbd ("iio: adc: Add ad7124 support")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for configuring and reading the gain and resolution
(integration time). Also provide the available values for gain and
resoltion respectively via `read_avail` callback.
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Link: https://patch.msgid.link/20240731063706.25412-2-abhashkumarjha123@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One useful thing to do (in case of problems) in this high speed devices
with digital interfaces is to try different test patterns to see if the
interface is working properly (and properly calibrated). Hence add this
to debugfs.
On top of this, for some test patterns, the backend may have a matching
validator block which can be helpful in identifying possible issues. For
the other patterns some test equipment must be used so one can look into
the signal and see how it looks like.
Hence, we also add the backend debugfs interface with
iio_backend_debugfs_add().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-8-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Group the backend configurations to be done in preparing and stopping
calibration in two new helpers analogous to ad9467_testmode_set(). This
is in preparation for adding support for debugFS test_mode where
we need similar configurations as in the calibration process.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-7-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a new axi_adc_read_chan_status() helper so we get the raw register
value out of it.
This is in preparation of a future change where we really want to look
into dedicated bits of the register.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-5-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds a basic debugfs interface for backends. Two new ops are being
added:
* debugfs_reg_access: Analogous to the core IIO one but for backend
devices.
* debugfs_print_chan_status: One useful usecase for this one is for
testing test tones in a digital interface and "ask" the backend to
dump more details on why a test tone might have errors.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-2-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of only passing the backend ops when calling
devm_iio_backend_register(), pass an info like structure that will
contains the ops and additional information. Fow now, the backend name
is being added as that will be used by the debugFS interface introduced
in a later patch.
It also opens the door for further customizations passed by backends.
All users of devm_iio_backend_register() were updated accordingly.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240802-dev-iio-backend-add-debugfs-v2-1-4cb62852f0d0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use of_property_present() to test for property presence rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20240731191312.1710417-5-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The DEVID register contains two pieces of information: the device ID in
the upper nibble, and the silicon revision number in the lower nibble.
The driver should work fine with any silicon revision, so let's mask
that out in the device ID check.
Fixes: 20e6d190ff ("net: pse-pd: Add TI TPS23881 PSE controller driver")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the manual access to the fwnode of the device to iterate over its
child nodes. `device_for_each_child_node` macro provides direct access
to the child nodes, and given that they are only required within the
loop, the scoped variant of the macro can be used.
Use the `device_for_each_child_node_scoped` macro to iterate over the
direct child nodes of the device.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240801-device_child_node_access-v1-2-ddfa21bef6f2@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7380 family has some compatible single-ended chips: AD7386/7/8(-4).
These single-ended chips have a 2:1 multiplexer in front of each ADC.
They also include additional configuration registers that allow for either
manual selection or automatic switching (sequencer mode), of the
multiplexer inputs. Add a section to describe this.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-7-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ad7386/7/8(-4) single-ended parts have a 2:1 mux in front of each ADC.
>From an IIO point of view, all inputs are exported, i.e ad7386/7/8
export 4 channels and ad7386-4/7-4/8-4 export 8 channels. First inputs
of muxes correspond to the first half of IIO channels (i.e 0-1 or 0-3)
and second inputs correspond to second half (i.e 2-3 or 4-7)
Currently, the driver supports only sampling first half OR second half of
the IIO channels. To enable sampling all channels simultaneously, these
parts have an internal sequencer that automatically cycles through the
mux entries.
When enabled, the maximum throughput is divided by two. Moreover, the ADCs
need additional settling time, so we add an extra CS toggle to correctly
propagate setting, and an additional spi transfer to read the second
half.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-6-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding ad7386/7/8 (16/14/12 bits) unsigned, dual simultaneous sampling,
single-ended compatible parts, and the corresponding ad7386-4/7-4/8-4
4 channels.
These parts have a 2:1 multiplexer in front of each ADC. They also include
additional configuration registers that allow for either manual selection
or automatic switching (sequencer mode), of the multiplexer inputs.
This commit focus on integrating manual selection. Sequencer mode will
be implemented later.
>From an IIO point of view, all inputs are exported, i.e ad7386/7/8
export 4 channels and ad7386-4/7-4/8-4 export 8 channels.
Inputs AinX0 of multiplexers correspond to the first half of IIO channels
(i.e 0-1 or 0-3) and inputs AinX1 correspond to second half (i.e 2-3 or
4-7). Example for AD7386/7/8 (2 channels parts):
IIO | AD7386/7/8
| +----------------------------
| | _____ ______
| | | | | |
voltage0 | AinA0 --|--->| | | |
| | | mux |----->| ADCA |---
voltage2 | AinA1 --|--->| | | |
| | |_____| |_____ |
| | _____ ______
| | | | | |
voltage1 | AinB0 --|--->| | | |
| | | mux |----->| ADCB |---
voltage3 | AinB1 --|--->| | | |
| | |_____| |______|
| |
| +----------------------------
When switching channel, the ADC require an additional settling time.
According to the datasheet, data is valid on the third CS low. We already
have an extra toggle before each read (either direct reads or buffered
reads) to sample correct data, so we just add a single CS toggle at the
end of the register write.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-5-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ad738x family contains single-ended parts that have a 2:1 mux in front
of ADC, so the number of IIO channels is different from the number of
simultaneous channels that can be sampled.
To prepare the support for single-ended parts, introduce a new
num_simultaneous_channels variable. For currently supported parts,
num_simultaneous_channels is equal to num_channels minus 1 (the
timestamps channel)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-4-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a function to retrieve the index of the active scan mask inside the
available scan masks array.
As in iio_scan_mask_match and iio_sanity_check_avail_scan_masks,
this function does not handle multi-long masks correctly.
It only checks the first long to be zero, and will use such mask
as a terminator even if there was bits set after the first long.
This should be fine since the available_scan_mask has already been
sanity tested using iio_sanity_check_avail_scan_masks.
See iio_scan_mask_match and iio_sanity_check_avail_scan_masks for
more details
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-2-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding ad7386/7/8 single-ended compatible parts, and the corresponding
ad7386-4/7-4/8-4 4 channels.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240731-ad7380-add-single-ended-chips-v2-1-cd63bf05744c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for AD4000 series of low noise, low power, high speed,
successive approximation register (SAR) ADCs.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/356109ac61182f16f2379d5d0cadccfe017f505b.1720810545.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for configuring the idle state of the MOSI signal in
controllers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmapf2oACgkQJNaLcl1U
h9BfoAgAhwBxDk6EmQdET9JM7Awv8EF4DhfirzMdR9Gp0v/fyVu/rQXPFYtxIzD4
w9d+1M6+GLXOhg8MFe427XZHEpJdcJ/kVU8bhXHXh0tr++OLBAxUxIMsuga5adUV
hyyowDq7VlL60ayfh92OxFza8ayj27MS37o3BRcKuLa5oRgVcvQegKCO+6YTlqfX
ahpDCzoneolFdpXEwdDMStB8Gq9PPaHC6A1Yp5rspLxg9w45WAUwn7IqSH8CE3l9
LPwjqu3CTLQoIoDOUQzUPVo1buf9hzqzsEcaIKHcOirT0xizpG6oLuIRV25q5+kG
nfcN6Q9eUBfz032+QTcOR+v2iWPG2A==
=rMeU
-----END PGP SIGNATURE-----
Merge tag 'spi-mosi-config' into togreg
spi: Support MOSI idle configuration
Add support for configuring the idle state of the MOSI signal in
controllers.
Add separate handling for adf4378 within the driver.
The main difference between adf4377 and adf4378 is that adf4378 has only
one output which is handled by only one gpio.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20240729095047.25040-3-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adf4378 provides only one output channel. Therefore there is only
one gpio available to enable the output. Reflect that into the bindings
using property conditions.
Add product link for the adf4378.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240729095047.25040-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
STK3013 is a proximity sensor by Sensortek, bearing chipid of 0x31. Despite
being marketed as a proximity sensor, it also appears to have ambient
light sensing capabilities.
The part is fully compatible with the existing implementation of the
device driver. Add the compatible string of stk3013 to the existing
list, with a fallback of stk3310.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240727-stk3310-v4-3-02497b1407ba@disroot.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In order to allow newer devices which are compatible with existing
sensors, issuing a warning for an unknown chipid indicates that
something has gone wrong with the init process, which isn't ideal.
Swap it with a friendlier info message to get things right.
Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20240727-stk3310-v4-1-02497b1407ba@disroot.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
