draft-ietf-6man-pio-pflag is adding a new flag to the Prefix Information
Option to signal that the network can allocate a unique IPv6 prefix per
client via DHCPv6-PD (see draft-ietf-v6ops-dhcp-pd-per-device).
When ra_honor_pio_pflag is enabled, the presence of a P-flag causes
SLAAC autoconfiguration to be disabled for that particular PIO.
An automated test has been added in Android (r.android.com/3195335) to
go along with this change.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Lamparter <equinox@opensourcerouting.org>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
uevent_show() wants to de-reference dev->driver->name. There is no clean
way for a device attribute to de-reference dev->driver unless that
attribute is defined via (struct device_driver).dev_groups. Instead, the
anti-pattern of taking the device_lock() in the attribute handler risks
deadlocks with code paths that remove device attributes while holding
the lock.
This deadlock is typically invisible to lockdep given the device_lock()
is marked lockdep_set_novalidate_class(), but some subsystems allocate a
local lockdep key for @dev->mutex to reveal reports of the form:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7+ #275 Tainted: G OE N
------------------------------------------------------
modprobe/2374 is trying to acquire lock:
ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220
but task is already holding lock:
ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&cxl_root_key){+.+.}-{3:3}:
__mutex_lock+0x99/0xc30
uevent_show+0xac/0x130
dev_attr_show+0x18/0x40
sysfs_kf_seq_show+0xac/0xf0
seq_read_iter+0x110/0x450
vfs_read+0x25b/0x340
ksys_read+0x67/0xf0
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (kn->active#6){++++}-{0:0}:
__lock_acquire+0x121a/0x1fa0
lock_acquire+0xd6/0x2e0
kernfs_drain+0x1e9/0x200
__kernfs_remove+0xde/0x220
kernfs_remove_by_name_ns+0x5e/0xa0
device_del+0x168/0x410
device_unregister+0x13/0x60
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c7/0x210
driver_detach+0x47/0x90
bus_remove_driver+0x6c/0xf0
cxl_acpi_exit+0xc/0x11 [cxl_acpi]
__do_sys_delete_module.isra.0+0x181/0x260
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The observation though is that driver objects are typically much longer
lived than device objects. It is reasonable to perform lockless
de-reference of a @driver pointer even if it is racing detach from a
device. Given the infrequency of driver unregistration, use
synchronize_rcu() in module_remove_driver() to close any potential
races. It is potentially overkill to suffer synchronize_rcu() just to
handle the rare module removal racing uevent_show() event.
Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1].
Fixes: c0a40097f0 ("drivers: core: synchronize really_probe() and dev_uevent()")
Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1]
Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch
Cc: stable@vger.kernel.org
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CXL driver has its own custom implementations of typed DT property
accessors. Replace the custom property accessor functions with the
common DT property functions.
This clean-up is part of a larger effort to remove of_get_property() and
other DT functions which leak pointers to DT node and property data.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240729-dt-cxl-cleanup-v1-2-a75eea80d231@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's little reason to dump DT property values when they can be read
at any time from the DT in /proc/device-tree. If such a feature is
needed, then it really should be implemented in the DT core such that
any module/driver can use it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240729-dt-cxl-cleanup-v1-1-a75eea80d231@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'cdx_mcdi_copy_buffer' has been unused since the original
commit eb96b74019 ("cdx: add MCDI protocol interface for firmware
interaction").
Looking at lkml, it was used in the V1 posting but was removed
somewhere before V6.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20240530233436.224461-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce the __free attribute for scope-based resource management.
Resources allocated with __free are automatically released at the end of
the scope. This enhancement aims to mitigate memory management issues
associated with forgetting to release resources by utilizing __free
instead of of_node_put().
To introduce this feature, some modifications to the code structure were
necessary. The original pattern:
```
prev = np;
while(...) {
[...]
np = of_find_next_cache_node(np);
of_node_put(prev);
prev = np;
[...]
}
```
has been updated to:
```
while(...) {
[...]
struct device_node __free(device_node) *prev = np;
np = of_find_next_cache_node(np)
[...]
}
```
With this change, the previous node is automatically cleaned up at the end
of each iteration, allowing the elimination of all of_node_put() calls and
some goto statements.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Link: https://lore.kernel.org/r/20240719151335.869145-1-vincenzo.mezzela@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a flag to binder_features to indicate that the freeze notification
feature is available.
Signed-off-by: Yu-Ting Tseng <yutingtseng@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240709070047.4055369-6-yutingtseng@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frozen processes present a significant challenge in binder transactions.
When a process is frozen, it cannot, by design, accept and/or respond to
binder transactions. As a result, the sender needs to adjust its
behavior, such as postponing transactions until the peer process
unfreezes. However, there is currently no way to subscribe to these
state change events, making it impossible to implement frozen-aware
behaviors efficiently.
Introduce a binder API for subscribing to frozen state change events.
This allows programs to react to changes in peer process state,
mitigating issues related to binder transactions sent to frozen
processes.
Implementation details:
For a given binder_ref, the state of frozen notification can be one of
the followings:
1. Userspace doesn't want a notification. binder_ref->freeze is null.
2. Userspace wants a notification but none is in flight.
list_empty(&binder_ref->freeze->work.entry) = true
3. A notification is in flight and waiting to be read by userspace.
binder_ref_freeze.sent is false.
4. A notification was read by userspace and kernel is waiting for an ack.
binder_ref_freeze.sent is true.
When a notification is in flight, new state change events are coalesced into
the existing binder_ref_freeze struct. If userspace hasn't picked up the
notification yet, the driver simply rewrites the state. Otherwise, the
notification is flagged as requiring a resend, which will be performed
once userspace acks the original notification that's inflight.
See https://r.android.com/3070045 for how userspace is going to use this
feature.
Signed-off-by: Yu-Ting Tseng <yutingtseng@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240709070047.4055369-4-yutingtseng@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable savedbitclkrate is assigned and never used, so can be removed.
sound/soc/fsl/lpc3xxx-i2s.c:42:13: warning: variable ‘savedbitclkrate’ set but not used [-Wunused-but-set-variable]
Fixes: 0959de657a ("ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20240731022949.135016-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing MODULE_DEVICE_TABLE definition for automatic loading of the
driver when it is built as a module.
Fixes: eb8d6d464a ("spi: add Renesas RPC-IF driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20240731072955.224125-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, irqchips for all of the subnodes (which represent a given
bus master) point to the parent wrapper node. This is no bueno, as
no interrupts arrive, ever (because nothing references that node).
Fix that by passing a reference to the respective master's of_node.
Worth noting, this is a NOP for devices with only a single master
described.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240522-topic-spmi_multi_master_irqfix-v2-1-7ec92a862b9f@linaro.org
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 02922ccbb3 ("spmi: pmic-arb: Register controller for bus instead of arbiter")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240725164636.3362690-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 15d9da3f81 ("binder: use bitmap for faster descriptor
lookup"), it was incorrectly assumed that references to the context
manager node should always get descriptor zero assigned to them.
However, if the context manager dies and a new process takes its place,
then assigning descriptor zero to the new context manager might lead to
collisions, as there could still be references to the older node. This
issue was reported by syzbot with the following trace:
kernel BUG at drivers/android/binder.c:1173!
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 447 Comm: binder-util Not tainted 6.10.0-rc6-00348-g31643d84b8c3 #10
Hardware name: linux,dummy-virt (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : binder_inc_ref_for_node+0x500/0x544
lr : binder_inc_ref_for_node+0x1e4/0x544
sp : ffff80008112b940
x29: ffff80008112b940 x28: ffff0e0e40310780 x27: 0000000000000000
x26: 0000000000000001 x25: ffff0e0e40310738 x24: ffff0e0e4089ba34
x23: ffff0e0e40310b00 x22: ffff80008112bb50 x21: ffffaf7b8f246970
x20: ffffaf7b8f773f08 x19: ffff0e0e4089b800 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 000000002de4aa60
x14: 0000000000000000 x13: 2de4acf000000000 x12: 0000000000000020
x11: 0000000000000018 x10: 0000000000000020 x9 : ffffaf7b90601000
x8 : ffff0e0e48739140 x7 : 0000000000000000 x6 : 000000000000003f
x5 : ffff0e0e40310b28 x4 : 0000000000000000 x3 : ffff0e0e40310720
x2 : ffff0e0e40310728 x1 : 0000000000000000 x0 : ffff0e0e40310710
Call trace:
binder_inc_ref_for_node+0x500/0x544
binder_transaction+0xf68/0x2620
binder_thread_write+0x5bc/0x139c
binder_ioctl+0xef4/0x10c8
[...]
This patch adds back the previous behavior of assigning the next
non-zero descriptor if references to previous context managers still
exist. It amends both strategies, the newer dbitmap code and also the
legacy slow_desc_lookup_olocked(), by allowing them to start looking
for available descriptors at a given offset.
Fixes: 15d9da3f81 ("binder: use bitmap for faster descriptor lookup")
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+3dae065ca76952a67257@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000c1c0a0061d1e6979@google.com/
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240722150512.4192473-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 1fffe7a34c ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning with make W=1. The following warnings are being
observed in drivers/char when CONFIG_ARCH_NETWINDER is enabled:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/ds1620.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/nwbutton.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/nwflash.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240717-md-arm-drivers-char-nw-v1-1-fee7a8505e9e@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I found one more missing dependency in the new driver: when building
without CONFIG_PCI_IOV, pci_sriov_configure_simple() cannot be
called directly:
drivers/misc/mrvl_cn10k_dpi.c: In function 'dpi_remove':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
9 | #define NULL ((void *)0)
| ^
include/linux/pci.h:2416:41: note: in expansion of macro 'NULL'
2416 | #define pci_sriov_configure_simple NULL
| ^~~~
drivers/misc/mrvl_cn10k_dpi.c:652:9: note: in expansion of macro 'pci_sriov_configure_simple'
652 | pci_sriov_configure_simple(pdev, 0);
Add this to the Kconfig file as well.
Fixes: 5f67eef6df ("misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Vamsi Attunuru <vattunuru@marvell.com>
Link: https://lore.kernel.org/r/20240719103858.1292094-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the devres-based management of ee1004_bus_data has
several issues when it comes to locking:
1. It does not call mutex_unlock() before returning an error.
2. When encountering an error, it deadlocks when trying to recursively
lock a mutex.
Fix this by moving the mutex-protected bus data initialization into
a separate function so that devm_add_action_or_reset() is called
without the mutex being held.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 55d57ef6fa ("eeprom: ee1004: Use devres for bus data cleanup")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240713234813.21746-1-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-hub.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-aspeed.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-gpio.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-ast-cf.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-scom.o
Add the missing invocations of the MODULE_DESCRIPTION() macro, and fix the
copy/paste of the module description comment in fsi-master-ast-cf.c.
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240730-module_description_orphans-v1-4-7094088076c8@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'cdns_sierra_pll_mux_table' is not modified in this driver.
And it is only used as a "const u32 *".
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
60937 3894 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o
After:
=====
text data bss dec hex filename
60897 3878 16 64791 fd17 drivers/phy/cadence/phy-cadence-sierra.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/43d881d52e3c1632ad197d4c2c18b6c481a13b24.1720723132.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'struct cdns_sierra_vals' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
60521 4310 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o
After:
=====
text data bss dec hex filename
60937 3894 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0ccfd259fdf40475c89cfb22a64c6388e7c646b4.1720723132.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'struct cdns_reg_pairs' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
60489 4342 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o
After:
=====
text data bss dec hex filename
60521 4310 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c57ee8206ebba8c222d7d954335654384072b9ac.1720723132.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'cdns_torrent_refclk_driver_mux_table' is not modified in this driver.
And it is only used as a "const u32 *".
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
93578 4798 16 98392 18058 drivers/phy/cadence/phy-cadence-torrent.o
After:
=====
text data bss dec hex filename
93606 4790 16 98412 1806c drivers/phy/cadence/phy-cadence-torrent.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/34e23ceb6b7b7eb730ee8deee21d231b504dc65f.1720718240.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'struct cdns_torrent_vals' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
92234 6078 16 98328 18018 drivers/phy/cadence/phy-cadence-torrent.o
After:
=====
text data bss dec hex filename
93578 4798 16 98392 18058 drivers/phy/cadence/phy-cadence-torrent.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d9d135ee9b806726766a1bc5e1404267939aa637.1720718240.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'struct cdns_torrent_vals_entry' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
85130 13214 16 98360 18038 drivers/phy/cadence/phy-cadence-torrent.o
After:
=====
text data bss dec hex filename
92234 6078 16 98328 18018 drivers/phy/cadence/phy-cadence-torrent.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/dcc4e539999a840b3fd8f40fd8fd7523390232ac.1720718240.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'struct cdns_reg_pairs' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
78154 20222 16 98392 18058 drivers/phy/cadence/phy-cadence-torrent.o
After:
=====
text data bss dec hex filename
85130 13214 16 98360 18038 drivers/phy/cadence/phy-cadence-torrent.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/803684a6f0c24d7e091dc8d285dd49c6fd31a010.1720718240.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module eMMC
and SPI flash powered-down initially (in fact it keeps the reset signal
asserted). BIOS_DISABLE_OVERRIDE pin allows to override that signal so
that eMMC and SPI can be used regardless of the state of the signal.
Let's make this GPIO a hog so that it's reserved and locked in the
proper state.
At the same time, make sure the pin is reserved for the hog and cannot
be requested by another node.
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-2-4e28eadf32d0@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In commit 91419ae042 ("arm64: dts: rockchip: use BCLK to GPIO switch
on rk3399"), an additional pinctrl state was added whose default pinmux
is for 8ch i2s0. However, Puma only has 2ch i2s0. It's been overriding
the pinctrl-0 property but the second property override was missed in
the aforementioned commit.
On Puma, a hardware slider called "BIOS Disable/Normal Boot" can disable
eMMC and SPI to force booting from SD card. Another software-controlled
GPIO is then configured to override this behavior to make eMMC and SPI
available without human intervention. This is currently done in U-Boot
and it was enough until the aforementioned commit.
Indeed, because of this additional not-yet-overridden property, this
software-controlled GPIO is now muxed in a state that does not override
this hardware slider anymore, rendering SPI and eMMC flashes unusable.
Let's override the property with the 2ch pinmux to fix this.
Fixes: 91419ae042 ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-1-4e28eadf32d0@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Remove the bindings for the Qualcomm 8x16 PHY driver that was dropped
in commit 4756f35fdf ("usb: phy: remove phy-qcom-8x16-usb.c") in 2017.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240711122016.41806-1-rayyan.ansari@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the hisilicon,hi3798cv200-combphy binding to DT schema format.
Drop the example as arm/hisilicon/controller/hi3798cv200-perictrl.yaml
already contains an example of this binding.
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240711152313.2364383-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Over the past years there have been many "misunderstandings" and
"confusion" as to who is, and is not, allowed early access to the
changes created by the members of the embargoed hardware issue teams
working on a specific problem.
The current process, while it does work, is "difficult" for many
companies to understand and agree with. Because of this, there has been
numerous attempts by many companies to work around the process by lies,
subterfuge, and other side channels sometimes involving unsuspecting
lawyers. Cut all of that out, and put the responsibility of
distributing code on the silicon vendor affected, as they already have
legal agreements in place that cover this type of distribution. When
this distribution happens, the developers involved MUST be notified of
this happening, to be kept aware of the situation at all times.
The wording here has been hashed out by many different companies and
lawyers involved in the process, as well as community members and
everyone now agrees that the proposed change here should work better
than what is currently happening.
This change has been approved by a review from a large number of
different open source legal members, representing the companies involved
in this process.
Link: https://lore.kernel.org/r/2024073035-bagel-vertigo-e0dd@gregkh
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Michael Dolan <mdolan@linuxfoundation.org>
Signed-off-by: Michael Dolan <mdolan@linuxfoundation.org>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The embargoed-hardware-issues.rst file needed a bunch of minor grammar,
punctuation, and syntax cleanups based on feedback we have gotten over
the past few years. The main change here is the term "silicon" being
used over "hardware" to differentiate between companies that make a chip
(i.e. a CPU) and those that take the chip and put it into their system.
No process changes are made here at all, only clarification for the way
the current process works.
All of these changes have been approved by a review from a large number
of different open source legal members, representing the companies
involved in this process.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/2024073032-outsource-sniff-e8ea@gregkh
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Michael Dolan <mdolan@linuxfoundation.org>
Signed-off-by: Michael Dolan <mdolan@linuxfoundation.org>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove an extra quote from the doc comment so that rustdoc
no longer genertes a link to a nonexistent file.
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: de6582833d ("rust: add firmware abstractions")
Link: https://lore.kernel.org/r/20240709004426.44854-1-andrewjballance@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use of FIELD_PREP_CONST() was a thinko - it's meant to be used for
(constant) initialisers, not constant values.
Use FIELD_PREP() where possible. It has better error checking and is
therefore the preferred macro to use in those cases.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240710-phy-field-prep-v1-1-2fa3f7dc4fc7@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The local variable period uses at most 32 bits and can be a u32 instead
of unsigned long. The upper 32 bits are all 0 after masking and right
shifting cap by HPET_COUNTER_CLK_PERIOD_SHIFT and can be discarded.
Since do_div() casts the divisor to u32 anyway, changing the data type
of period to u32 also removes the following Coccinelle/coccicheck
warning reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240710215238.799239-2-thorsten.blum@toblux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mirsad Todorovac reported a compiler warning in "ni_stc.h" due to the
variable `range_ni_E_ao_ext` being defined but unused when building the
"ni_routes_test" module.
The `range_ni_E_ao_ext` variable is tentatively defined in "ni_stc.h"
(with internal linkage) and fully defined in "ni_mio_common.c".
"ni_stc.h" and/or "ni_mio_common.c" are included by the "ni_atmio",
"ni_pcimio", "ni_mio_cs", and "ni_routes_test" modules, which will each
get their own local `range_ni_E_ao_ext` variable defined. However, it
is not used by the "ni_mio_cs" or "ni_routes_test" modules. They should
get optimized out, but there are compiler warnings about the unused
variable when built with the `W=1` option.
Move the full definition of the variable from "ni_mio_common.c" into the
places where it is used, namely "ni_atmio.c" and "ni_pcimio.c", and
remove the tentative definition of the variable from "ni_stc.h". This
fixes the compiler warnings.
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/lkml/3bab8580-c01a-4183-94af-ba3193c94c0e@gmail.com/
Cc: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240710173719.3559437-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the bindings for the SATA PHY on both apq8064 and ipq806x from
the old text format to yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240715130854.53501-2-rayyan.ansari@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The following bug was triggered on a system built with
CONFIG_DEBUG_PREEMPT=y:
# echo p > /proc/sysrq-trigger
BUG: using smp_processor_id() in preemptible [00000000] code: sh/117
caller is perf_event_print_debug+0x1a/0x4c0
CPU: 3 UID: 0 PID: 117 Comm: sh Not tainted 6.11.0-rc1 #109
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
check_preemption_disabled+0xc8/0xd0
perf_event_print_debug+0x1a/0x4c0
__handle_sysrq+0x140/0x180
write_sysrq_trigger+0x61/0x70
proc_reg_write+0x4e/0x70
vfs_write+0xd0/0x430
? handle_mm_fault+0xc8/0x240
ksys_write+0x9c/0xd0
do_syscall_64+0x96/0x190
entry_SYSCALL_64_after_hwframe+0x4b/0x53
This is because the commit d4b294bf84 ("perf/x86: Hybrid PMU support
for counters") took smp_processor_id() outside the irq critical section.
If a preemption occurs in perf_event_print_debug() and the task is
migrated to another cpu, we may get incorrect pmu debug information.
Move smp_processor_id() back inside the irq critical section to fix this
issue.
Fixes: d4b294bf84 ("perf/x86: Hybrid PMU support for counters")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240729220928.325449-1-lihuafei1@huawei.com
Per the example of:
!atomic_cmpxchg(&key->enabled, 0, 1)
the inverse was written as:
atomic_cmpxchg(&key->enabled, 1, 0)
except of course, that while !old is only true for old == 0, old is
true for everything except old == 0.
Fix it to read:
atomic_cmpxchg(&key->enabled, 1, 0) == 1
such that only the 1->0 transition returns true and goes on to disable
the keys.
Fixes: 83ab38ef0a ("jump_label: Fix concurrency issues in static_key_slow_dec()")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lkml.kernel.org/r/20240731105557.GY33588@noisy.programming.kicks-ass.net
Zhengchao Shao says:
====================
net/smc: do some cleanups in smc module
Do some cleanups in smc module.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The input parameter "is_rmb" of the smcr_new_buf_create function
has never been used, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the SMC client perform CLC handshake, it will check whether
the clc header type is correct in receiving SMC_CLC_ACCEPT packet.
The specific invoking path is as follows:
__smc_connect
smc_connect_clc
smc_clc_wait_msg
smc_clc_msg_hdr_valid
smc_clc_msg_acc_conf_valid
Therefore, the smc_connect_check_aclc interface invoked by
__smc_connect does not need to check type again.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the SMC client begins to connect to server, smcd_version is set
to SMC_V1 + SMC_V2. If fail to get VLAN ID, only SMC_V2 information
is left in smcd_version. And smcd_version will not be changed to 0.
Therefore, remove the fallback caused by the failure to get VLAN ID.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because linux/err.h is unreferenced in smc_loopback.h file, so
remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intel Arrow Lake-H/U has the same GPIO hardware than Meteor Lake-P but
the ACPI ID is different. Add this new ACPI ID to the list of supported
devices.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The recent fix for making the take over of the broadcast timer more
reliable retrieves a per CPU pointer in preemptible context.
This went unnoticed as compilers hoist the access into the non-preemptible
region where the pointer is actually used. But of course it's valid that
the compiler keeps it at the place where the code puts it which rightfully
triggers:
BUG: using smp_processor_id() in preemptible [00000000] code:
caller is hotplug_cpu__broadcast_tick_pull+0x1c/0xc0
Move it to the actual usage site which is in a non-preemptible region.
Fixes: f7d43dd206 ("tick/broadcast: Make takeover of broadcast hrtimer reliable")
Reported-by: David Wang <00107082@163.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yu Liao <liaoyu15@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ttg56ers.ffs@tglx
Currently, 8250_platform driver is used only for devices with fixed
serial ports (plat_serial8250_port). Extend this driver for any generic
16550A platform devices which can be probed using standard hardware
discovery mechanisms like ACPI.
This is required in particular for RISC-V which has non-PNP generic
16550A compatible UART that needs to be enumerated as ACPI platform
device.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20240730051218.767580-1-sunilvl@ventanamicro.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds suspend/resume support for the 8250_bcm2835aux
driver to provide power management support on attached
devices.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240728130029.78279-7-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
