This patch makes three error messages in the driver easier to read by
capitalizing the first letters properly.
For example, "channel already linked" becomes "Channel already linked", and
"expect" becomes "expected", as you would typically
find in an error message.
This patch improves user experience by making the errors clearer.
Signed-off-by: Steven Davis <goldside000@outlook.com>
Link: https://lore.kernel.org/r/SJ2P223MB1026E786B28986901BC1C126F7A92@SJ2P223MB1026.NAMP223.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the two supplies for the pmu-io-domains that are defined in the
vendor devicetree for the TS433.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-15-heiko@sntech.de
The TS433 doesn't provide display output, but the gpu nevertheless can be
used for compute tasks for example.
So there is no reason not to enable it.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-14-heiko@sntech.de
Fill in the missing pieces for RK809 pmic used on the TS433.
The regulator setup comes from the vendor-devicetree, so without proper
schematics its accuracy is somewhat unclear, but it looks really similar
to all the other rk3568 boards, so follows the reference design it seems.
The one caveat is related to vcc3v3_sd. This regulator needs to stay on.
When turned off because of no users, access to both PCIe controllers
will stall. Maybe this rail does supply the 100MHz refclk generation
or so.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-13-heiko@sntech.de
The TS433 seems to use a silergy,syr827 regulator for the cpu supply.
At least that is the compatible used in the vendor devicetree, though
it could very well also be another fan53555 clone.
Define the needed regulator node and hook up the cpu-supply to the
cpu cores.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-12-heiko@sntech.de
The TS433 has 3 buttons, power and copy in the front as well as a reset
pinhole button on the back. The power-button is connected to the embedded
controller while the other two buttons are just gpio connected.
Add the gpio-keys definition for the two buttons we can handle right now.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-11-heiko@sntech.de
Add the 4 gpio-controlled LEDs to the Qnap-TS433.
They are meant for individual disk activitivy, but I haven't found a
way for how to connect them to their individual sata slot yet.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-9-heiko@sntech.de
Add the aliases for the internal network interface as well as the emmc
on the board and make sure the dedicated RTC is always the first one.
The TS433 actually has two rtc devices. One coming from the rk809 pmic
without added functionality and also a dedicated RTC from Mycrocrystal
that is battery backed to keep the time.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-8-heiko@sntech.de
The TS433 has 4 bays. The last two are accessed via a pci-connected
sata controller, while the first two are accessed via the rk3568's
sata controllers. Enable these two now.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-7-heiko@sntech.de
As most Rockchip boards do, the TS433 also uses uart2 for its serial
output. Set the correct chosen entry for it.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-6-heiko@sntech.de
Enable usb controllers and phys and add regulator infrastructure for the
usb ports on the TS433.
Of course there are no schematics available for the device, so the
regulator information comes from the vendor-devicetree with unknown
accuracy.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-5-heiko@sntech.de
Uart0 is connected to an MCU on the board that handles system control
like the fan-speed. So far no driver for it is available though.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-4-heiko@sntech.de
The TS433 uses both pcie controllers for sata and the 2nd network
interface. Set the needed data-lanes in the pcie3 phy and enable
the second pcie controller, as well as remove the bifurcation comment.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-3-heiko@sntech.de
The original patch added two columns in the flat-table of Luma-Only
Image Formats, without updating hints to latex: above it. This results
in wrong column count in the output of Sphinx's latex builder.
Fix it.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-media/bdbc27ba-5098-49fb-aabf-753c81361cc7@gmail.com/
Fixes: adb1d4655e ("media: v4l: Add V4L2-PIX-FMT-Y14P format")
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Intel IPU6 PCI driver need register its devices on auxiliary
bus, so it needs to select the AUXILIARY_BUS in Kconfig.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407161833.7BEFXejx-lkp@intel.com/
Fixes: c70281cc83 ("media: intel/ipu6: add Kconfig and Makefile")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit 4670c8c3fb ("media: ipu-bridge: Fix Kconfig dependencies") changed
how IPU_BRIDGE dependencies are handled for all drivers, but the IPU6
variant was added the old way, which causes build time warnings when I2C is
turned off:
WARNING: unmet direct dependencies detected for IPU_BRIDGE
Depends on [n]: MEDIA_SUPPORT [=m] && PCI [=y] && MEDIA_PCI_SUPPORT [=y] && (ACPI [=y] || COMPILE_TEST [=y]) && I2C [=n]
Selected by [m]:
- VIDEO_INTEL_IPU6 [=m] && MEDIA_SUPPORT [=m] && PCI [=y] && MEDIA_PCI_SUPPORT [=y] && (ACPI [=y] || COMPILE_TEST [=y]) && VIDEO_DEV [=m] && X86 [=y] && X86_64 [=y] && HAS_DMA [=y]
To make it consistent with the other IPU drivers as well as avoid this
warning, change the 'select' into 'depends on'.
Fixes: c70281cc83 ("media: intel/ipu6: add Kconfig and Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Sakari Ailus: Alternatively depend on !IPU_BRIDGE.]
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The code path for kcontrol accesses have often nested locks of both
card's controls_rwsem and power_ref, and applies in that order.
However, what could take much longer is the latter, power_ref; it
waits for the power state of the device, and it pretty much depends on
the user's action.
This patch swaps the locking order of those locks to a more natural
way, namely, power_ref -> controls_rwsem, in order to shorten the time
of possible nested locks. For consistency, power_ref is taken always
in the top-level caller side (that is, *_user() functions and the
ioctl handler itself).
Link: https://patch.msgid.link/20240729160659.4516-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We want sometimes to keep the runtime PM disabled persistently just
like we did for the PM deny-list in the previous change, e.g. for
testing some buggy device. This patch enhances the existing
pm_blacklist option for achieving it easily.
The default behavior doesn't change -- the driver looks up the deny
list and disables the runtime PM if matches. However, when
pm_blacklist=1 option is set, now the driver disables the runtime PM
completely, just like the deny-list does.
Update the documentation for this option, too.
Link: https://patch.msgid.link/20240729141519.18398-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a runtime PM deny-list for the devices that show the problems
(typically click noises) at runtime suspend/resume, and when it
matches, the driver disables the default runtime PM. However, we
still allow the runtime PM changed via power_save module option
dynamically, and the desktop system often tweaks it. This ended up
with a re-enablement of the runtime PM that surprises users, suddenly
suffering from the noises.
This patch changes the driver behavior slightly: when the device is
listed in the deny-list, ignore the power_save option change and keep
the original (that is, off) runtime PM state.
Link: https://patch.msgid.link/20240729141519.18398-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We had a nice name scheme in ALSA sequencer UMP binding for each
sequencer port referring to each assigned Function Block name, while
the legacy rawmidi refers only to the UMP Endpoint name. It's better
to align both.
This patch moves the UMP Group attribute update functions into the
core UMP code from the sequencer binding code, and improve the
substream name of the legacy rawmidi.
Link: https://patch.msgid.link/20240729141315.18253-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
struct snd_kcontrol contains a flex array of snd_kcontrol_volatile
objects at its end, and the array size is stored in count field.
This can be annotated gracefully with __counted_by() for catching
possible array overflows.
One additional change is the order of the count field initialization;
The assignment of the count field is moved before assignment of vd[]
elements for avoiding false-positive warnings from compilers.
Link: https://patch.msgid.link/20240726152840.8629-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For some reason I didn't see this issue on my arm64 or x86-64 builds,
but Stephen Rothwell reports that commit 2accfdb7ef ("profiling:
attempt to remove per-cpu profile flip buffer") left these static
variables around, and the powerpc build is unhappy about them:
kernel/profile.c:52:28: warning: 'cpu_profile_flip' defined but not used [-Wunused-variable]
52 | static DEFINE_PER_CPU(int, cpu_profile_flip);
| ^~~~~~~~~~~~~~~~
..
So remove these stale left-over remnants too.
Fixes: 2accfdb7ef ("profiling: attempt to remove per-cpu profile flip buffer")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The use of the __free function allows the cleanup to be based on scope
instead of on another function called later. This makes the cleanup
automatic and less susceptible to errors later.
This code was compiled without errors or warnings.
Signed-off-by: David Hunter <david.hunter.linux@gmail.com>
Link: https://lore.kernel.org/r/20240720152447.311442-1-david.hunter.linux@gmail.com
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Now that all clock controllers have been migrated to the new
mtk_register_reset_controller_with_dev() function, the one taking
struct device node is now unused: remove it.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240718082528.220750-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
device_node_to_regmap() can return different errors, and it's better
practice to pass them to callers.
Clean up the hardcoded -EINVAL and use PTR_ERR(regmap) instead.
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20240717115919.975474-1-fshao@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Test that clks registered with 'struct clk_parent_data' work as
intended and can find their parents.
Cc: Christian Marangi <ansuelsmth@gmail.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-9-sboyd@kernel.org
Test that the fixed rate basic type clk works as intended.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-8-sboyd@kernel.org
Unit tests are more ergonomic and simpler to understand if they don't
have to hoist a bunch of code into the test harness init and exit
functions. Add some test managed wrappers for the clk APIs so that clk
unit tests can write more code in the actual test and less code in the
harness.
Only add APIs that are used for now. More wrappers can be added in the
future as necessary.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-7-sboyd@kernel.org
Introduce KUnit resource wrappers around platform_driver_register(),
platform_device_alloc(), and platform_device_add() so that test authors
can register platform drivers/devices from their tests and have the
drivers/devices automatically be unregistered when the test is done.
This makes test setup code simpler when a platform driver or platform
device is needed. Add a few test cases at the same time to make sure the
APIs work as intended.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-6-sboyd@kernel.org
Test the KUnit test managed overlay APIs. Confirm that platform devices
are created and destroyed properly. This provides us confidence that the
test managed APIs work correctly and can be relied upon to provide tests
with fake platform devices and device nodes via overlays compiled into
the kernel image.
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-5-sboyd@kernel.org
Add the vendor prefix "test" to reserve a vendor prefix for bindings
that are purely for testing device tree code. This allows test code to
write bindings that can be checked by the schema validator.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-4-sboyd@kernel.org
Add test managed wrappers for of_overlay_apply() that automatically
removes the overlay when the test is finished. This API is intended for
use by KUnit tests that test code which relies on 'struct device_node's
and of_*() APIs.
KUnit tests will call of_overlay_apply_kunit() to load an overlay that's
been built into the kernel image. When the test is complete, the overlay
will be removed.
This has a few benefits:
1) It keeps the tests hermetic because the overlay is removed when the
test is complete. Tests won't even be aware that an overlay was
loaded in another test.
2) The overlay code can live right next to the unit test that loads it.
The overlay and the unit test can be compiled into one kernel module
if desired.
3) We can test different device tree configurations by loading
different overlays. The overlays can be written for a specific test,
and there can be many of them loaded per-test without needing to jam
all possible combinations into one DTB.
4) It also allows KUnit to test device tree dependent code on any
architecture, not just UML. This allows KUnit tests to test
architecture specific device tree code.
There are some potential pitfalls though. Test authors need to be
careful to not overwrite properties in the live tree. The easiest way to
do this is to add and remove nodes with a 'kunit-' prefix, almost
guaranteeing that the same node won't be present in the tree loaded at
boot.
Suggested-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-3-sboyd@kernel.org
We'd like to apply overlays to the root node in KUnit so we can test
platform devices created as children of the root node.
On some architectures (powerpc), the root node isn't marked with
OF_POPULATED_BUS. If an overlay tries to modify the root node on these
platforms it will fail, while on other platforms, such as ARM, it will
succeed. This is because the root node is marked with OF_POPULATED_BUS
by of_platform_default_populate_init() calling
of_platform_default_populate() with NULL as the first argument.
Loosen the requirement here so that platform devices can be created for
nodes created as children of the root node via DT overlays even if the
platform bus wasn't populated for the root node.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[sboyd@kernel.org: Folded in condition fix]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-2-sboyd@kernel.org
Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Remove the use of the term "blacklist". What the comment using that term
refers to does not seem to exist at all anyway as the driver does not
have such list but rather only a list of compatible controllers.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Remove the comment using the term "blacklist" from piix_init_sidpr().
That comment is useless given that the function piix_no_sidpr() name is
clear about what is being checked.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Rename the array sil_blacklist to sil_quirks as this name is more
neutral and is also consistent with how this driver define quirks with
the SIL_QUIRK_XXX flags.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Rephrase the comment for the eMachines entry in the sysids array of
ahci_broken_suspend() to not use the term blacklist.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Let's not use the term blacklist in the function
serverworks_osb4_filter() documentation comment and rather simply refer
to what that function looks at: the list of devices with groken UDMA5.
While at it, also constify the values of the csb_bad_ata100 array.
Of note is that all of this should probably be handled using libata
quirk mechanism but it is unclear if these UDMA5 quirks are specific
to this controller only.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Introduce the function ata_dev_print_quirks() to print the quirk flags
that will be applied to a scanned device. This new function is called
from ata_dev_quirks() when a match on a device model or device model
and revision is found for a device in the __ata_dev_quirks array.
To implement this function, the ATA_QUIRK_ flags are redefined using
the new enum ata_quirk which defines the bit shift for each quirk
flag. The array of strings ata_quirk_names is used to define the name
of each flag, which are printed by ata_dev_print_quirks().
Example output for a device listed in the __ata_dev_quirks array and
which has the ATA_QUIRK_DISABLE flag applied:
[10193.461270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10193.469190] ata1.00: Model 'ASMT109x- Config', rev '2143 5', applying quirks: disable
[10193.469195] ata1.00: unsupported device, disabling
[10193.481564] ata1.00: disable device
enum ata_quirk also defines the __ATA_QUIRK_MAX value as one plus the
last quirk flag defined. This value is used in ata_dev_quirks() to add a
build time check that all quirk flags fit within the unsigned int
(32-bits) quirks field of struct ata_device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
According to Wiktionary, the verb "hork" is computing slang defined as
"To foul up; to be occupied with difficulty, tangle, or unpleasantness;
to be broken" (https://en.wiktionary.org/wiki/hork#Verb). libata uses
this with the term "horkage" to refer to broken device features. Given
that this term is not widely used and its meaning unknown to many,
rename it to the more commonly used term "quirk", similar to many other
places in the kernel.
The renaming done is:
1) Rename all ATA_HORKAGE_XXX flags to ATA_QUIRK_XXX
2) Rename struct ata_device horkage field to quirks
3) Rename struct ata_blacklist_entry to struct ata_dev_quirks_entry. The
array of these structures defining quirks for known devices is
renamed __ata_dev_quirks.
4) The functions ata_dev_blacklisted() and ata_force_horkage() are
renamed to ata_dev_quirks() and ata_force_quirks() respectively.
5) All the force_horkage_xxx() macros are renamed to force_quirk_xxx()
And while at it, make sure that the type "unsigned int" is used
consistantly for quirk flags variables and data structure fields.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
In prog_tests/test_global_maps_resize.c, we test various use cases for
resizing global maps. Commit 7244100e0389 ("libbpf: Don't take direct
pointers into BTF data from st_ops") updated libbpf to not store pointers
to volatile BTF data, which for some users, was causing a UAF when resizing
a datasec array.
Let's ensure we have coverage for resizing datasec arrays with struct_ops
progs by also including a struct_ops map and struct_ops prog in the
test_global_map_resize skeleton. The map is automatically loaded, so we
don't need to do anything other than add it to the BPF prog being tested
to get the coverage.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240725032214.50676-1-void@manifault.com
test_xdp_veth.sh tests that XDP return codes work as expected, by bringing
up multiple veth pairs isolated in different namespaces, attaching specific
xdp programs to each interface, and ensuring that the whole chain allows to
ping one end interface from the first one. The test runs well but is
currently not integrated in test_progs, which prevents it from being run
automatically in the CI infrastructure.
Rewrite it as a C test relying on libbpf to allow running it in the CI
infrastructure. The new code brings up the same network infrastructure and
reuses the same eBPF programs as test_xdp_veth.sh, for which skeletons are
already generated by the bpf tests makefile.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-2-23bdba21b2f9@bootlin.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
