This patch uses the new helper connect_to_addr_str() in sk_lookup.c to
create the client socket and connect to the server, instead of using local
defined function make_client(). This local function can be dropped then.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/058199d7ab46802249dae066ca22c98f6be508ee.1721475357.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
test_progs-no_alu32 -t libbpf_get_fd_by_id_opts
is being rejected by the verifier with the following error
due to compiler optimization:
6: (67) r0 <<= 62 ; R0_w=scalar(smax=0x4000000000000000,umax=0xc000000000000000,smin32=0,smax32=umax32=0,var_off=(0x0; 0xc000000000000000))
7: (c7) r0 s>>= 63 ; R0_w=scalar(smin=smin32=-1,smax=smax32=0)
; @ test_libbpf_get_fd_by_id_opts.c:0
8: (57) r0 &= -13 ; R0_w=scalar(smax=0x7ffffffffffffff3,umax=0xfffffffffffffff3,smax32=0x7ffffff3,umax32=0xfffffff3,var_off=(0x0; 0xfffffffffffffff3))
; int BPF_PROG(check_access, struct bpf_map *map, fmode_t fmode) @ test_libbpf_get_fd_by_id_opts.c:27
9: (95) exit
At program exit the register R0 has smax=9223372036854775795 should have been in [-4095, 0]
Workaround by adding barrier().
Eventually the verifier will be able to recognize it.
Fixes: 5d99e198be ("bpf, lsm: Add check for BPF LSM return value")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The serial console settings in the chosen node are device-specific,
not SoC-specific. Move the chosen node out of bcm21664.dtsi and into
the only DTS that uses it, bcm21664-garnet.dts.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20240729-bcm21664-common-v2-1-ebc21a89bf63@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Document alreasdy used binding for Syscon / AVS monitor:
brcm,bcm2711-avs-monitor to fix dt_binding_check and dtbs_check warnings
like:
brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240517125138.53441-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM2712 SoC family can be found on Raspberry Pi 5.
Add minimal SoC and board (Rpi5 specific) dts file to be able to
boot from SD card and use console on debug UART.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/874589f6c621036620cca944986e5be7238b4784.1717061147.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
This patch 1) fixes all the issues (not most) reported by pylint,
2) add the functionability to tackle documents that need translation,
3) add logging to adjust the logging level and log file
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240719041400.3909775-2-dzm91@hust.edu.cn
The goal of the workflows@ mailing list was to make it easier for
maintainers who don't use lore+lei to subscribe to topics related
to process changes. In other words it should cover changes to Documentation
files which most maintainers should know about. Recent changes from Kees [1]
to provide guidelines on naming KUnit files did not fall under workflows@
since Documentation/dev-tools/ isn't covered. The patch volume for
dev-tools isn't huge and most of the changes are interesting. Add it.
Link: https://lore.kernel.org/20240720165441.it.320-kees@kernel.org/ # [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240723223258.2197852-1-kuba@kernel.org
Finish the translation of kbuild/headers_install.rst and
kbuild/index.rst, then add kbuild into zh_CN/index.rst.
Update to commit 5b67fbfc32 ("Merge tag 'kbuild-v5.7' of
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
[jc: added missing EOF newline ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240726145754.2598197-1-dzm91@hust.edu.cn
Since v6.8 the definition of GFP_NOWAIT has implied __GFP_NOWARN,
so it is now redundant to add this flag explicitly.
Update the docs to match, and emphasise the need for a fallback
when using GFP_NOWAIT.
Fixes: 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240729140127.244606-1-Dave.Martin@arm.com
Move management of the perf_event->security blob out of the individual
security modules and into the security infrastructure. Instead of
allocating the blobs from within the modules the modules tell the
infrastructure how much space is required, and the space is allocated
there. There are no longer any modules that require the perf_event_free()
hook. The hook definition has been removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the infiniband security blob out of the individual
security modules and into the LSM infrastructure. The security modules
tell the infrastructure how much space they require at initialization.
There are no longer any modules that require the ib_free() hook.
The hook definition has been removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak, selinux style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the dev_tun security blob out of the individual
security modules and into the LSM infrastructure. The security modules
tell the infrastructure how much space they require at initialization.
There are no longer any modules that require the dev_tun_free hook.
The hook definition has been removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak, selinux style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Create a helper function lsm_blob_alloc() for general use in the hook
specific functions that allocate LSM blobs. Change the hook specific
functions to use this helper. This reduces the code size by a small
amount and will make adding new instances of infrastructure managed
security blobs easier.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the key->security blob out of the individual security
modules and into the security infrastructure. Instead of allocating the
blobs from within the modules the modules tell the infrastructure how
much space is required, and the space is allocated there. There are
no existing modules that require a key_free hook, so the call to it and
the definition for it have been removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move management of the sock->sk_security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Jakub reports build failures when merging linux/master with net tree:
CXX test_cpp
In file included from <built-in>:454:
<command line>:2:9: error: '_GNU_SOURCE' macro redefined [-Werror,-Wmacro-redefined]
2 | #define _GNU_SOURCE
| ^
<built-in>:445:9: note: previous definition is here
445 | #define _GNU_SOURCE 1
The culprit is commit cc937dad85 ("selftests: centralize -D_GNU_SOURCE= to
CFLAGS in lib.mk") which unconditionally added -D_GNU_SOUCE to CLFAGS.
Apparently clang++ also unconditionally adds it for the C++ targets [0]
which causes a conflict. Add small change in the selftests makefile
to filter it out for test_cpp.
Not sure which tree it should go via, targeting bpf for now, but net
might be better?
0: https://stackoverflow.com/questions/11670581/why-is-gnu-source-defined-by-default-and-how-to-turn-it-off
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240725214029.1760809-1-sdf@fomichev.me
Refactor the code in selinux_netlbl_sock_genattr to return ERR_PTR
when an error occurs.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Simplifies the logic for determining the security context type in
security_compute_sid, enhancing readability and efficiency.
Consolidates default type assignment logic next to type transition
checks, removing redundancy and improving code flow.
Signed-off-by: Canfeng Guo <guocanfeng@uniontech.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add test for lsm tail call to ensure tail call can only be used between
bpf lsm progs attached to the same hook.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20240719110059.797546-9-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The return ranges of some bpf lsm test progs can not be deduced by
the verifier accurately. To avoid erroneous rejections, add explicit
return value checks for these progs.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20240719110059.797546-8-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
After checking lsm hook return range in verifier, the test case
"test_progs -t test_lsm" failed, and the failure log says:
libbpf: prog 'test_int_hook': BPF program load failed: Invalid argument
libbpf: prog 'test_int_hook': -- BEGIN PROG LOAD LOG --
0: R1=ctx() R10=fp0
; int BPF_PROG(test_int_hook, struct vm_area_struct *vma, @ lsm.c:89
0: (79) r0 = *(u64 *)(r1 +24) ; R0_w=scalar(smin=smin32=-4095,smax=smax32=0) R1=ctx()
[...]
24: (b4) w0 = -1 ; R0_w=0xffffffff
; int BPF_PROG(test_int_hook, struct vm_area_struct *vma, @ lsm.c:89
25: (95) exit
At program exit the register R0 has smin=4294967295 smax=4294967295 should have been in [-4095, 0]
It can be seen that instruction "w0 = -1" zero extended -1 to 64-bit
register r0, setting both smin and smax values of r0 to 4294967295.
This resulted in a false reject when r0 was checked with range [-4095, 0].
Given bpf lsm does not return 64-bit values, this patch fixes it by changing
the compare between r0 and return range from 64-bit operation to 32-bit
operation for bpf lsm.
Fixes: 8fa4ecd49b ("bpf: enforce exact retval range on subprog/callback exit")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240719110059.797546-5-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
bpf progs can be attached to kernel functions, and the attached functions
can take different parameters or return different return values. If
prog attached to one kernel function tail calls prog attached to another
kernel function, the ctx access or return value verification could be
bypassed.
For example, if prog1 is attached to func1 which takes only 1 parameter
and prog2 is attached to func2 which takes two parameters. Since verifier
assumes the bpf ctx passed to prog2 is constructed based on func2's
prototype, verifier allows prog2 to access the second parameter from
the bpf ctx passed to it. The problem is that verifier does not prevent
prog1 from passing its bpf ctx to prog2 via tail call. In this case,
the bpf ctx passed to prog2 is constructed from func1 instead of func2,
that is, the assumption for ctx access verification is bypassed.
Another example, if BPF LSM prog1 is attached to hook file_alloc_security,
and BPF LSM prog2 is attached to hook bpf_lsm_audit_rule_known. Verifier
knows the return value rules for these two hooks, e.g. it is legal for
bpf_lsm_audit_rule_known to return positive number 1, and it is illegal
for file_alloc_security to return positive number. So verifier allows
prog2 to return positive number 1, but does not allow prog1 to return
positive number. The problem is that verifier does not prevent prog1
from calling prog2 via tail call. In this case, prog2's return value 1
will be used as the return value for prog1's hook file_alloc_security.
That is, the return value rule is bypassed.
This patch adds restriction for tail call to prevent such bypasses.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20240719110059.797546-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned.
Fixes: 520b7aa00d ("bpf: lsm: Initialize the BPF LSM hooks")
Reported-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240719110059.797546-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a disabled hooks list for BPF LSM. progs being attached to the
listed hooks will be rejected by the verifier.
Suggested-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20240719110059.797546-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Martin KaFai Lau says:
====================
bpf: Retire the unsupported_ops usage in struct_ops
From: Martin KaFai Lau <martin.lau@kernel.org>
This series retires the unsupported_ops usage and depends on the
null-ness check on the cfi_stubs instead.
Please see individual patches for details.
v2:
- Fixed a gcc compiler warning on Patch 1.
====================
Link: https://lore.kernel.org/r/20240722183049.2254692-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
There is an existing "bpf_tcp_ca/unsupp_cong_op" test to ensure
the unsupported tcp-cc "get_info" struct_ops prog cannot be loaded.
This patch adds a new test in the bpf_testmod such that the
unsupported ops test does not depend on other kernel subsystem
where its supporting ops may be changed in the future.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240722183049.2254692-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The tramp_1 to tramp_40 ops is not set in the cfi_stubs in the
bpf_testmod_ops. It fails the struct_ops_multi_pages test after
retiring the unsupported_ops in the earlier patch.
This patch initializes them in a loop during the bpf_testmod_init().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240722183049.2254692-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
-----BEGIN PGP SIGNATURE-----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=194H
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2024072901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fixes for HID-BPF after the merge with the bpf tree (Arnd Bergmann
and Benjamin Tissoires)
- some tool type fix for the Wacom driver (Tatsunosuke Tobita)
- a reorder of the sensor discovery to ensure the HID AMD SFH is
removed when no sensors are available (Basavaraj Natikar)
* tag 'for-linus-2024072901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: add test for attaching multiple time the same struct_ops
HID: bpf: prevent the same struct_ops to be attached more than once
selftests/hid: disable struct_ops auto-attach
selftests/hid: fix bpf_wq new API
HID: amd_sfh: Move sensor discovery before HID device initialization
hid: bpf: add BPF_JIT dependency
HID: wacom: more appropriate tool type categorization
HID: wacom: Modify pen IDs
These really can be handled gracefully without killing the machine.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The task pointer which is handed to dequeue_signal() is always current. The
argument along with the first comment about signalfd in that function is
confusing at best. Remove it and use current internally.
Update the stale comment for dequeue_signal() while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Rename posix_timer_event() to posix_timer_queue_signal() as this is what
the function is about.
Consolidate the requeue pending and deactivation updates into that function
as there is no point in doing this in all incarnations of posix timers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Posix CPU timers are not updating k_itimer::it_active which makes it
impossible to base decisions in the common posix timer code on it.
Update it when queueing or dequeueing posix CPU timers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
hrtimer based and CPU timers have their own way to install the new interval
and to reset overrun and signal handling related data.
Create a helper function and do the same operation for all variants.
This also makes the handling of the interval consistent. It's only stored
when the timer is actually armed, i.e. timer->it_value != 0. Before that it
was stored unconditionally for posix CPU timers and conditionally for the
other posix timers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
No requirement for a real list. Spare a few bytes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Keeping the overrun count of the previous setup around is just wrong. The
new setting has nothing to do with the previous one and has to start from a
clean slate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
No point in doing this all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Avoid the late sighand lock/unlock dance when a timer is not armed to
enforce reevaluation of the timer base so that the process wide CPU timer
sampling can be disabled.
Do it right at the point where the arming decision is made which already
has sighand locked.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
A leftover from historical code which describes fiction.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
posix_cpu_timer_set() uses @val as variable for the current time. That's
confusing at best.
Use @now as anywhere else and rewrite the confusing comment about clock
sampling.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
There is no point in arming SIGEV_NONE timers as they never deliver a
signal. timer_gettime() is handling the expiry time correctly and that's
all SIGEV_NONE timers care about.
Prevent arming them and remove the expiry handler code which just disarms
them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reuse the split out __posix_cpu_timer_get() function which does already the
right thing.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Expired SIGEV_NONE oneshot timers must return 0 nsec for the expiry time in
timer_get(), but the posix CPU timer implementation returns 1 nsec.
Add the missing conditional.
This will be cleaned up in a follow up patch.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Expired SIGEV_NONE oneshot timers must return 0 nsec for the expiry time in
timer_get(), but the posix CPU timer implementation returns 1 nsec.
Add the missing conditional.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
timer_gettime() must return the remaining time to the next expiry of a
timer or 0 if the timer is not armed and no signal pending, but posix CPU
timers fail to forward a timer which is already expired.
Add the required logic to address that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
