- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
the SOM dtsi.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmZvsOEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5gAAf/dv5/cYTuA8MRKAM9Zf0Mf+FKGTDa
/kgfsMz/zkSUke54ZI9clo9laoTyhucPjPu6mUJ7AkbsMiptUQ3fiV1mM+TWuQLV
inlg5qUDvD6JFTiR1Dkm5ML0kyiqbRV6/bHGSCT/tmsqj14xZRgWgavh2e4UKavs
upY1Rj1jaxjc+bycSW9IBTdPvpbNGDgEmBw1YkJysrqnRK3YSOU1QD/xYFKyEtJh
X9gyYc8dmTmuNw3P8Go7T0ABQfYSz/m1hyZEEXWq6rx7xm11LtW+/TnNTcRXxtNM
2WA/DBbCSlaUafZ2zwavb4l+ibr80VlVEechzEJxfrf5Df6Kq8Sv+Qh9eg==
=GHYs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=okOh
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.10:
- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
the SOM dtsi.
* tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
Link: https://lore.kernel.org/r/Zm+xVUmFtaOnYBb4@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Due to personal reasons, I can't maintain T-Head SoCs any more. At the
same time, I would nominate Drew Fustini as Maintainer. Drew contributed
the sdhci support of TH1520 in the past, and is working on the clk
parts. I believe he will look after T-Head SoCs.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the reference pid from the cifs_io_subrequest struct to the
cifs_io_request struct as it's the same for all subreqs of a particular
request.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
In cifs, only pick a channel when setting up a read request rather than
doing so individually for every subrequest and instead use that channel for
all. This mirrors what the code in v6.9 does.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Defer read completion from the I/O thread to the cifsiod thread so as not
to slow down the I/O thread. This restores the behaviour of v6.9.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
OEMs can connect a number of types of speakers to the sidecar cs35l56
amplifiers and a different speaker requires a different firmware
configuration.
When the cs42l43 ACPI includes a property indicating a particular type
of speaker has been installed this should be passed to the cs35l56
driver instances as a device property.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240619121703.3411989-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor accessing the SDCA extension properties to make it easier to
access multiple properties to assist with future features. Return the
node itself and allow the caller to read the actual properties.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240619121703.3411989-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to teach KVM a couple of new tricks. CPTR_EL2 and its
VHE accessor CPACR_EL1 need to be handled specially:
- CPACR_EL1 is trapped on VHE so that we can track the TCPAC
and TTA bits
- CPTR_EL2.{TCPAC,E0POE} are propagated from L1 to L2
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-15-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add trap description for CPTR_EL2.{TCPAC,TAM,E0POE,TTA}.
TTA is a bit annoying as it changes location depending on E2H.
This forces us to add yet another "complex" trap condition.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-14-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Start folding the guest hypervisor's FP/SVE traps into the value
programmed in hardware. Note that as of writing this is dead code, since
KVM does a full put() / load() for every nested exception boundary which
saves + flushes the FP/SVE state.
However, this will become useful when we can keep the guest's FP/SVE
state alive across a nested exception boundary and the host no longer
needs to conservatively program traps.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Round out the ZCR_EL2 gymnastics by loading SVE state in the fast path
when the guest hypervisor tries to access SVE state.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Handle CPACR_EL1 accesses when running a VHE guest. In order to
limit the cost of the emulation, implement it ass a shallow exit.
In the other cases:
- this is a nVHE L1 which will write to memory, and we don't trap
- this is a L2 guest:
* the L1 has CPTR_EL2.TCPAC==0, and the L2 has direct register
access
* the L1 has CPTR_EL2.TCPAC==1, and the L2 will trap, but the
handling is defered to the general handling for forwarding
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
I'm getting tired of telling people to put a magic "" in the
#define X86_FEATURE /* "" ... */
comment to hide the new feature flag from the user-visible
/proc/cpuinfo.
Flip the logic to make it explicit: an explicit "<name>" in the comment
adds the flag to /proc/cpuinfo and otherwise not, by default.
Add the "<name>" of all the existing flags to keep backwards
compatibility with userspace.
There should be no functional changes resulting from this.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240618113840.24163-1-bp@kernel.org
A subsequent change to KVM will add preliminary support for merging a
guest hypervisor's CPTR traps with that of KVM. Prepare by spinning off
a new helper for managing CPTR traps.
Avoid reading CPACR_EL1 for the baseline trap config, and start off with
the most restrictive set of traps that is subsequently relaxed.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
It is possible that the guest hypervisor has selected a smaller VL than
the maximum for its nested guest. As such, ZCR_EL2 may be configured for
a different VL when exiting a nested guest.
Set ZCR_EL2 (via the EL1 alias) to the maximum VL for the VM before
saving SVE state as the SVE save area is dimensioned by the max VL.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The max VL for nested guests is additionally constrained by the max VL
selected by the guest hypervisor. Use that instead of KVM's max VL when
running a nested guest.
Note that the guest hypervisor's ZCR_EL2 is sanitised against the VM's
max VL at the time of access, so there's no additional handling required
at the time of use.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Load the guest hypervisor's ZCR_EL2 into the corresponding EL1 register
when restoring SVE state, as ZCR_EL2 affects the VL in the hypervisor
context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Unlike other SVE-related registers, ZCR_EL2 takes a sysreg trap to EL2
when HCR_EL2.NV = 1. KVM still needs to honor the guest hypervisor's
trap configuration, which expects an SVE trap (i.e. ESR_EL2.EC = 0x19)
when CPTR traps are enabled for the vCPU's current context.
Otherwise, if the guest hypervisor has traps disabled, emulate the
access by mapping the requested VL into ZCR_EL1.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Similar to FPSIMD traps, don't load SVE state if the guest hypervisor
has SVE traps enabled and forward the trap instead. Note that ZCR_EL2
will require some special handling, as it takes a sysreg trap to EL2
when HCR_EL2.NV = 1.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Give precedence to the guest hypervisor's trap configuration when
routing an FP/ASIMD trap taken to EL2. Take advantage of the
infrastructure for translating CPTR_EL2 into the VHE (i.e. EL1) format
and base the trap decision solely on the VHE view of the register. The
in-memory value of CPTR_EL2 will always be up to date for the guest
hypervisor (more on that later), so just read it directly from memory.
Bury all of this behind a macro keyed off of the CPTR bitfield in
anticipation of supporting other traps (e.g. SVE).
[maz: account for HCR_EL2.E2H when testing for TFP/FPEN, with
all the hard work actually being done by Chase Conklin]
[ oliver: translate nVHE->VHE format for testing traps; macro for reuse
in other CPTR_EL2.xEN fields ]
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
An unintended consequence of commit 9c573cd313 ("randomize_kstack:
Improve entropy diffusion") was that the per-architecture entropy size
filtering reduced how many bits were being added to the mix, rather than
how many bits were being used during the offsetting. All architectures
fell back to the existing default of 0x3FF (10 bits), which will consume
at most 1KiB of stack space. It seems that this is working just fine,
so let's avoid the confusion and update everything to use the default.
The prior intent of the per-architecture limits were:
arm64: capped at 0x1FF (9 bits), 5 bits effective
powerpc: uncapped (10 bits), 6 or 7 bits effective
riscv: uncapped (10 bits), 6 bits effective
x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective
s390: capped at 0xFF (8 bits), undocumented effective entropy
Current discussion has led to just dropping the original per-architecture
filters. The additional entropy appears to be safe for arm64, x86,
and s390. Quoting Arnd, "There is no point pretending that 15.75KB is
somehow safe to use while 15.00KB is not."
Co-developed-by: Yuntao Liu <liuyuntao12@huawei.com>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Fixes: 9c573cd313 ("randomize_kstack: Improve entropy diffusion")
Link: https://lore.kernel.org/r/20240617133721.377540-1-liuyuntao12@huawei.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20240619214711.work.953-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
As described in the added code comment, a reference to .exit.text is ok for
drivers registered via module_platform_driver_probe(). Make this explicit to
prevent the following section mismatch warning:
WARNING: modpost: drivers/virt/coco/sev-guest/sev-guest: section mismatch in reference: \
sev_guest_driver+0x10 (section: .data) -> sev_guest_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/4a81b0e87728a58904283e2d1f18f73abc69c2a1.1711748999.git.u.kleine-koenig@pengutronix.de
Some allocations done by KVM are temporary, they are created as result
of program actions, but can't exists for arbitrary long times.
They should have been GFP_TEMPORARY (rip!).
OTOH, kvm-nx-lpage-recovery and kvm-pit kernel threads exist for as long
as VM exists but their task_struct memory is not accounted.
This is story for another day.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Message-ID: <c0122f66-f428-417e-a360-b25fc0f154a0@p183>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop Wanpeng as a KVM PARAVIRT reviewer as his @tencent.com email is
bouncing, and according to lore[*], the last activity from his @gmail.com
address was almost two years ago.
[*] https://lore.kernel.org/all/CANRm+Cwj29M9HU3=JRUOaKDR+iDKgr0eNMWQi0iLkR5THON-bg@mail.gmail.com
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240610163427.3359426-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sync pending posted interrupts to the IRR prior to re-scanning I/O APIC
routes, irrespective of whether the I/O APIC is emulated by userspace or
by KVM. If a level-triggered interrupt routed through the I/O APIC is
pending or in-service for a vCPU, KVM needs to intercept EOIs on said
vCPU even if the vCPU isn't the destination for the new routing, e.g. if
servicing an interrupt using the old routing races with I/O APIC
reconfiguration.
Commit fceb3a36c2 ("KVM: x86: ioapic: Fix level-triggered EOI and
userspace I/OAPIC reconfigure race") fixed the common cases, but
kvm_apic_pending_eoi() only checks if an interrupt is in the local
APIC's IRR or ISR, i.e. misses the uncommon case where an interrupt is
pending in the PIR.
Failure to intercept EOI can manifest as guest hangs with Windows 11 if
the guest uses the RTC as its timekeeping source, e.g. if the VMM doesn't
expose a more modern form of time to the guest.
Cc: stable@vger.kernel.org
Cc: Adamos Ttofari <attofari@amazon.de>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240611014845.82795-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmZ0VAAACgkQMUZtbf5S
IrtMnQ//b0YNnC2PduSn6fDnDamyZW3vjqwXQ6K0DsgSzEIiAtEd6LbkPN4vAcpp
k634dHseQjTuAcsTZxisIs32nC2up9q/t/+6XD8VSaQbSzKhB+rFDviUxfGJWjt4
MZRK0mDcmib2tXAEfYnMi+QjvC5S+ZSHLpemDdzTI3AyKcPynqLcM1PcC0CGS5GS
6MpvRAtEgTAkXd2rc4WAbOcmd8NLJN80f/srRDXFVqrXy8f6adaULvCvzSXSiQy8
peUaPhI6BYNBL2Tzjp3D+Nh54ks3Ol8MeqaGYsuJHtgd+/I+/YWzYc74an8BuEwR
C6fszbH7i64WaQUI5ZhX/1Da0CTesNxzsPgeAFP3qEe20r53vN0NiFjRrHpO02El
lew9Hrx27Zzt9k3eSdtC3GGj/S93PYjE5RRuSClQrW8fUqETZ8dFocbrNAraHGMv
rDOqIT3XMg/BIBw9ADxizAgsrFC0QbBShQPs2iMuuVwmrWj9DEC0GKlt3KxyPT36
fl4w3gGRdIDz/ZTXKQZtta3Z4ckaKiTw8jbNXxteBDEHErFYYND+4XDzK/uIqHCe
0IoVWVUnhVfKOuGBIDGIFDsAvbgqTcVd+wZTB4SxZsbXISzpfYLcrM4qXf4YQNNb
MeIQg0Zwjm+xdLGXVCt8wBBGmj4EK9uMa3wjYu3lGREgxyH42eI=
=Lb9b
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
VF drivers can only use GuC-based TLB invalidation, as they don't
have access to the related registers. However, VFs shouldn't need
any explicit TLB invalidation before enabling CTB communication,
as there will be an implicit GGTT TLB invalidation issued by the
GuC itself as part of MMIO-based action handling.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-8-michal.wajdeczko@intel.com
The VF drivers can't apply any workarounds as they don't have
access to related registers. Since xe_wa_apply_tile_workarounds()
function is not using RTP yet, we have to add early return.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-4-michal.wajdeczko@intel.com
There are no RTP save-restore actions applicable for VFs on
current platforms. If any future platform will require some,
we will need to update the RTP framework to support VF_READY
or VF_ONLY actions. In the meantime, just skip all actions if
we are running as VF driver.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619214557.905-3-michal.wajdeczko@intel.com
We already maintain several flags that control the availability
of features on a given device. Disable features, like PCODE or
GuC PC or GSC, that do not apply to a VF device.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620100147.949-1-michal.wajdeczko@intel.com
Replace sprintf() and scnprintf() with sysfs_emit() and sysfs_emit_at()
in the cpufreq core.
This ensures safer buffer handling and consistency with sysfs interfaces.
Update show_scaling_available_governors() and related functions for
compliance with the new API.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240619081520.259971-1-perry.yuan@amd.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The compiler implements kCFI by adding type information (u32) above
every function that might be indirectly called and, whenever a function
pointer is called, injects a read-and-compare of that u32 against the
value corresponding to the expected type. In case of a mismatch, a BRK
instruction gets executed. When the hypervisor triggers such an
exception in nVHE, it panics and triggers and exception return to EL1.
Therefore, teach nvhe_hyp_panic_handler() to detect kCFI errors from the
ESR and report them. If necessary, remind the user that EL2 kCFI is not
affected by CONFIG_CFI_PERMISSIVE.
Pass $(CC_FLAGS_CFI) to the compiler when building the nVHE hyp code.
Use SYM_TYPED_FUNC_START() for __pkvm_init_switch_pgd, as nVHE can't
call it directly and must use a PA function pointer from C (because it
is part of the idmap page), which would trigger a kCFI failure if the
type ID wasn't present.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-9-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a helper to display a panic banner soon to also be used for kCFI
failures, to ensure that we remain consistent.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-8-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As it is already used in two places, move esr_comment() to a header for
re-use, with a clearer name.
Introduce esr_is_cfi_brk() to detect kCFI BRK syndromes, currently used
by early_brk64() but soon to also be used by hypervisor code.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-7-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Given that the sole purpose of __hyp_call_panic() is to call panic(), a
__noreturn function, give it the __noreturn attribute, removing the need
for its caller to use unreachable().
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-6-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Ignore R_AARCH64_ABS32 relocations, instead of panicking, when emitting
the relocation table of the hypervisor. The toolchain might produce them
when generating function calls with kCFI to represent the 32-bit type ID
which can then be resolved across compilation units at link time. These
are NOT actual 32-bit addresses and are therefore not needed in the
final (runtime) relocation table (which is unlikely to use 32-bit
absolute addresses for arm64 anyway).
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-5-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The invalid_host_el2_vect macro is used by EL2{t,h} handlers in nVHE
*host* context, which should never run with a guest context loaded.
Therefore, remove the superfluous vCPU context check and branch
unconditionally to hyp_panic.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-4-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Fix the mismatch between the (incorrect) C signature, C call site, and
asm implementation by aligning all three on an API passing the
parameters (pgd and SP) separately, instead of as a bundled struct.
Remove the now unnecessary memory accesses while the MMU is off from the
asm, which simplifies the C caller (as it does not need to convert a VA
struct pointer to PA) and makes the code slightly more robust by
offsetting the struct fields from C and properly expressing the call to
the C compiler (e.g. type checker and kCFI).
Fixes: f320bc742b ("KVM: arm64: Prepare the creation of s1 mappings at EL2")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-3-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
