KVM is about to add support for more VM-scoped feature ID regs that
live outside of the id_regs[] array, which means the index of the
debugfs iterator may not actually be an index into the array.
Prepare by getting the sys_reg encoding from the descriptor itself.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Fix AXP717 PMIC probe and by extension it's consumers
-----BEGIN PGP SIGNATURE-----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=KVSG
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd fix from Lee Jones:
- Fix AXP717 PMIC probe and by extension its consumers
* tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: axp20x: AXP717: Fix missing IRQ status registers range
GCC diagnostic pragma method throws below warnings in some of the versions
drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:16:9: warning: unknown
option after '#pragma GCC diagnostic' kind [-Wpragmas]
#pragma GCC diagnostic ignored "-Wunused-const-variable"
^
In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:18:0:
drivers/gpu/drm/msm/adreno/adreno_gen7_0_0_snapshot.h:924:19: warning:
'gen7_0_0_external_core_regs' defined but not used [-Wunused-variable]
static const u32 *gen7_0_0_external_core_regs[] = {
^
In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:19:0:
drivers/gpu/drm/msm/adreno/adreno_gen7_2_0_snapshot.h:748:19: warning:
'gen7_2_0_external_core_regs' defined but not used [-Wunused-variable]
static const u32 *gen7_2_0_external_core_regs[] = {
^
In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:20:0:
drivers/gpu/drm/msm/adreno/adreno_gen7_9_0_snapshot.h:1188:43: warning:
'gen7_9_0_sptp_clusters' defined but not used [-Wunused-variable]
static struct gen7_sptp_cluster_registers gen7_9_0_sptp_clusters[] = {
^
drivers/gpu/drm/msm/adreno/adreno_gen7_9_0_snapshot.h:1438:19: warning:
'gen7_9_0_external_core_regs' defined but not used [-Wunused-variable]
static const u32 *gen7_9_0_external_core_regs[] = {
Remove GCC version dependency by using __unused__ for the unused gen7_* includes.
Changes in v2:
- Fix the warnings in the commit text
- Use __attribute((__unused__)) instead of local assignment
changes in v3:
- drop the Link from the auto add
changes in v4:
- replace __attribute((__unused__)) with __always_unused
Fixes: 64d6255650 ("drm/msm: More fully implement devcoredump for a7xx")
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/597265/
[Add gen7_9_0_cx_debugbus_blocks as well]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Running "perftool-testsuite_probe" fails as below:
./perf test -v "perftool-testsuite_probe"
83: perftool-testsuite_probe : FAILED
There are three fails:
1. Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: listing added probe :: perf probe -l (output regexp parsing)
2. Regexp not found: "probe:vfs_mknod"
Regexp not found: "probe:vfs_create"
Regexp not found: "probe:vfs_rmdir"
Regexp not found: "probe:vfs_link"
Regexp not found: "probe:vfs_write"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: wildcard adding support (command exitcode + output regexp parsing)
3. Regexp not found: "Failed to find"
Regexp not found: "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64"
Regexp not found: "in this function|at this address"
Line did not match any pattern: "The /boot/vmlinux file has no debug information."
Line did not match any pattern: "Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package."
These three tests depends on kernel debug info.
1. Fail 1 expects file name along with probe which needs debuginfo
2. Fail 2 :
perf probe -nf --max-probes=512 -a 'vfs_* $params'
Debuginfo-analysis is not supported.
Error: Failed to add events.
3. Fail 3 :
perf probe 'vfs_read somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64'
Debuginfo-analysis is not supported.
Error: Failed to add events.
There is already helper function skip_if_no_debuginfo in
lib/probe_vfs_getname.sh which does perf probe and returns
"2" if debug info is not present. Use the skip_if_no_debuginfo
function and skip only the three tests which needs debuginfo
based on the result.
With the patch:
83: perftool-testsuite_probe:
--- start ---
test child forked, pid 3927
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission ::
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission :: -a
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission :: --add
-- [ PASS ] -- perf_probe :: test_adding_kernel :: listing added probe :: perf list
Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
-- [ PASS ] -- perf_probe :: test_adding_kernel :: using added probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: deleting added probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: listing removed probe (should NOT be listed)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: dry run :: adding probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: first probe adding
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: second probe adding (without force)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: second probe adding (with force)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: using doubled probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: removing multiple probes
Regexp not found: "probe:vfs_mknod"
Regexp not found: "probe:vfs_create"
Regexp not found: "probe:vfs_rmdir"
Regexp not found: "probe:vfs_link"
Regexp not found: "probe:vfs_write"
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
Regexp not found: "Failed to find"
Regexp not found: "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64"
Regexp not found: "in this function|at this address"
Line did not match any pattern: "The /boot/vmlinux file has no debug information."
Line did not match any pattern: "Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package."
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function with retval :: add
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function with retval :: record
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function argument probing :: script
## [ PASS ] ## perf_probe :: test_adding_kernel SUMMARY
---- end(0) ----
83: perftool-testsuite_probe : Ok
Only the three specific tests are skipped and remaining
ran successfully.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240617122121.7484-1-atrajeev@linux.vnet.ibm.com
Use the suspend encoders helper which is also used by the i915 driver.
This fixes an issue in the xe driver where the encoder
suspend_complete() hook is not called and was an overlook when this hook
was added in commit b61fad5f7e ("drm/i915/tc: Call TypeC port
flush_work/cleanup without modeset locks held") for i915, but not added
to the xe driver (which was still in a separate source tree at the above
point).
v2: Fix checkpatch warn in commit log. (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618125255.4080303-3-imre.deak@intel.com
Pass intel_display to the encoder suspend/shutdown helpers instead of
drm_i915_private for better isolation.
v2: Pass intel_display to HAS_DISPLAY() as well, update commit log
accordingly. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618125255.4080303-2-imre.deak@intel.com
Move the encoder suspend/shutdown helpers to intel_encoder.c, this being
the logical place for encoder functions.
This also allows sharing the above helpers with the xe driver, done in a
follow-up patch.
While at it rename the functions using the usual intel_encoder prefix
and in the functions rename the dev_priv parameter to i915.
v2: Remove extra w/s in the include section. (Jani)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618125255.4080303-1-imre.deak@intel.com
Move the CP_PROTECT settings into the hw catalog.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599731/
Introduce a6xx_info where we can stash gen specific stuff without
polluting the toplevel adreno_info struct.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599728/
Move the hwcg tables into the hw catalog.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599727/
Split each gen's gpu table into it's own file. Only code-motion, no
functional change.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599725/
Split into a separate table per generation, in preparation to move each
gen's device table to it's own file.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599723/
Introduce support for Airoha PCIe PHY controller available in EN7581
SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20ac99aa8628d97778594f606681db7f868f24fe.1718485860.git.lorenzo@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In various configurations/architectures, bitfield.h may not be
transitively included, which results in a compiler error because
FIELD_PREP is an unexpanded macro:
drivers/phy/freescale/phy-fsl-imx8qm-hsio.c:459:8: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
459 | val = FIELD_PREP(HSIO_MODE_MASK, val);
| ^
1 error generated.
Include bitfield.h explicitly to fix the build.
Fixes: 82c56b6dd2 ("phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406170340.7mk3WU3Q-lkp@intel.com/
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240620-phy-fsl-imx8qm-hsio-add-bitfield-include-v1-1-5c7c09ed87e6@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The MT6319 is a pin-compatible drop-in replacement for MT6315 with
slightly better electrical characteristics.
It's unclear whether there are any differences, since the downstream
implementation doesn't describe the MT6319 separately. Neither does the
implementation check chip IDs, even though those are available.
Add a new compatible for the MT6319 just in case differences are
discovered later and fall back to the MT6315 compatible.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240620094746.2404753-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The OA ioctl's already have drm_dbg's which are sufficient to tell the user
that OA is not supported on unsupported configurations (execlist mode and
platform gen < 12). Having additional WARN_ON's for these during driver
probe create unnecessary noise. Just remove these WARN_ON's.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619225617.3465899-1-ashutosh.dixit@intel.com
When UMD ask config to be updated, xe_oa_config_locked() was calling
xe_oa_emit_oa_config() that would use stream->oa_config but that is
only changed to the next oa_config after xe_oa_emit_oa_config() finish.
So it was setting the same config for all DRM_XE_PERF_IOCTL_CONFIG
calls.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619192854.199289-1-jose.souza@intel.com
If oa->xe can be NULL then we shall not use it as a valid pointer.
Fixes: cdf02fe1a9 ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Fixes: b6fd51c621 ("drm/xe/oa/uapi: Define and parse OA stream properties")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619175427.861-1-michal.wajdeczko@intel.com
There is a type 'enum operation_mode_e' contains the display modes of
the 'monitor' subcommand. This type isn't used though, instead the
variable 'mode' is of a simple 'int' type.
Change 'mode' variable type from 'int' to 'enum operation_mode_e' in
order to improve compiler type checking.
Built and tested this with different monitor cmdline params. Everything
works as expected, that is nothing changed and no regressions encountered.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove not supported '-v' parameter from the cpupower's 'monitor'
command description.
There is a '-v' parameter described in cpupower's 'monitor' command man
page. It isn't supported at the moment, and perhaps has never been
supported. When I run the monitor with this parameter I get the
following:
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -v
monitor: invalid option -- 'v'
invalid or unknown argument
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -V
monitor: invalid option -- 'V'
invalid or unknown argument
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This case of the common error message upon failure of
input_allocate_device() repeats the word "input".
Drop one "input" from the error message.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240619-ims-pcu-counted_by-v1-2-3ee0ead2e57d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the __counted_by compiler attribute for the data[] flexible array
member to improve the results of array bound sanitizers.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240619-ims-pcu-counted_by-v1-1-3ee0ead2e57d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As the driver supports more devices over time the single MODULE_ALIAS
is complete and raises several warnings:
SPI driver ads7846 has no spi_device_id for ti,tsc2046
SPI driver ads7846 has no spi_device_id for ti,ads7843
SPI driver ads7846 has no spi_device_id for ti,ads7845
SPI driver ads7846 has no spi_device_id for ti,ads7873
Fix this by adding a spi_device_id table and removing the manual
MODULE_ALIAS.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240619122703.2081476-1-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f0 ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use functions introduced in commit 966e397e4f ("drm/mipi-dsi: Introduce
mipi_dsi_*_write_seq_multi()") and commit f79d6d28d8
("drm/mipi-dsi: wrap more functions for streamline handling") for the
sony tulip truly nt35521 panel.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612163946.488684-1-tejasvipin76@gmail.com
SDHCI_QUIRK_UNSTABLE_RO_DETECT is used by only one driver variant.
It was added in 2011 by commit 82b0e23a29 ("mmc: sdhci: Fix read-only
detection with JMicron 388 chip").
Simplify sdhci by moving the logic to the only place it is used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240614080051.4005-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.10-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.11.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sdhci_check_ro() can call mmc_gpio_get_ro() while holding the sdhci
host->lock spinlock. That would be a problem if the GPIO access done by
mmc_gpio_get_ro() needed to sleep.
However, host->lock is not needed anyway. The mmc core ensures that host
operations do not race with each other, and asynchronous callbacks like the
interrupt handler, software timeouts, completion work etc, cannot affect
sdhci_check_ro().
So remove the locking.
Fixes: 6d5cd068ee ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614080051.4005-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_of_parse() reads device property "wp-inverted" and sets
MMC_CAP2_RO_ACTIVE_HIGH if it is true. MMC_CAP2_RO_ACTIVE_HIGH is used
to invert a write-protect (AKA read-only) GPIO value.
sdhci_get_property() also reads "wp-inverted" and sets
SDHCI_QUIRK_INVERTED_WRITE_PROTECT which is used to invert the
write-protect value as well but also acts upon a value read out from the
SDHCI_PRESENT_STATE register.
Many drivers call both mmc_of_parse() and sdhci_get_property(),
so that both MMC_CAP2_RO_ACTIVE_HIGH and
SDHCI_QUIRK_INVERTED_WRITE_PROTECT will be set if the controller has
device property "wp-inverted".
Amend the logic in sdhci_check_ro() to allow for that possibility,
so that the write-protect value is not inverted twice.
Also do not invert the value if it is a negative error value. Note that
callers treat an error the same as not-write-protected, so the result is
functionally the same in that case.
Also do not invert the value if sdhci host operation ->get_ro() is used.
None of the users of that callback set SDHCI_QUIRK_INVERTED_WRITE_PROTECT
directly or indirectly, but two do call mmc_gpio_get_ro(), so leave it to
them to deal with that if they ever set SDHCI_QUIRK_INVERTED_WRITE_PROTECT
in the future.
Fixes: 6d5cd068ee ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614080051.4005-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since the previous commit, function gfs2_quota_sync() will not cause the
sync generation to creep forward by one every time the function is
called; this helps keep things a but more tidy. We also don't care that
this function allocates a page of memory every time it is called, so no
good reason for keeping qd_changed() anymore, which just duplicates
qd_grab_sync().
This reverts commit 06aa6fd31a.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The quota sync generation is only ever updated under sd_quota_sync_mutex
by gfs2_quota_sync(), but its current value is fetched ouside of that
mutex, so use WRITE_ONCE() and READ_ONCE() when accessing it without
holding that mutex.
Pass the current sync generation to do_sync() from its callers to ensure
that we're not recording the wrong generation when the syncing is
done. Also, make sure that qd->qd_sync_gen only ever moves forward.
In gfs2_quota_sync(), only write the new sync generation when we know
that there are changes. This eliminates the need for function
sd_changed(), which we will remove in the next commit.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
With the locking the previous patch has introduced for each struct
gfs2_quota_data object, sd_quota_mutex has become largely irrelevant.
By waiting on the buffer head instead of waiting on the mutex in
get_bh(), it becomes completely irrelevant and can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add missing file path of the Rust abstractions to the maintainers entry,
until we can move it to 'drivers/base/'.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20240619133949.64638-2-dakr@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve the wording of safety comments to be more explicit about what
exactly is guaranteed to be valid.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20240619133949.64638-1-dakr@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing file path of the Rust abstractions to the maintainers entry,
until we can move it to 'drivers/base/firmware_loader/'.
CC: Luis Chamberlain <mcgrof@kernel.org>
CC: Russ Weight <russ.weight@linux.dev>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20240619132029.59296-2-dakr@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve the wording of safety comments to be more explicit about what
exactly is guaranteed to be valid.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20240619132029.59296-1-dakr@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the plane alpha according to DRM plane property.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-14-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Set the plane alpha according to DRM plane property.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-13-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Support RGBA8888 and RGBX8888 formats in OVL on MT8195.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-12-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Set DRM mode configs limitation according to the hardware capabilities
and pass the IGT checks as below:
- The test "graphics.IgtKms.kms_plane" requires a frame buffer with
width of 4512 pixels (> 4096).
- The test "graphics.IgtKms.kms_cursor_crc" checks if the cursor size is
defined, and run the test with cursor size from 1x1 to 512x512.
Please notice that the test conditions may change as IGT is updated.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-10-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Define new color formats to hide the bit operation in the MACROs to make
the switch statement more concise.
Change the MACROs to align the naming rule in DRM.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-9-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add OVL compatible name for MT8195.
Without this commit, DRM won't work after modifying the device tree.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-7-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
