Add support for ICSSG switch firmware using existing Dual EMAC driver
with switchdev.
Limitations:
VLAN offloading is limited to 0-256 IDs.
MDB/FDB static entries are limited to 511 entries and different FDBs can
hash to same bucket and thus may not completely offloaded
Example assuming ETH1 and ETH2 as ICSSG2 interfaces:
Switch to ICSSG Switch mode:
ip link add name br0 type bridge
ip link set dev eth1 master br0
ip link set dev eth2 master br0
ip link set dev br0 up
bridge vlan add dev br0 vid 1 pvid untagged self
Going back to Dual EMAC mode:
ip link set dev br0 down
ip link set dev eth1 nomaster
ip link set dev eth2 nomaster
ip link del name br0 type bridge
By default, Dual EMAC firmware is loaded, and can be changed to switch
mode by above steps
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ICSSG can operating in switch mode with 2 ext port and 1 host port with
VLAN/FDB/MDB and STP offloading. Add switchdev based driver to
support the same.
Driver itself will be integrated with icssg_prueth in future commits
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce helper functions to configure firmware FDB tables, VLAN tables
and Port VLAN ID settings to aid adding Switch mode support.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The existing logic to pick a DMIC blob is based on several historical
assumptions that the NHLT in BIOS always contains 32-bits per sample
type (first patch, [1]).
The other issue with the existing logic is that it was designed to care only
about the bit depth of the format and fails to find the existing and correct
blob when rate/channels are different on the FE side compared to what we should
be using on the DAI side (we have components in path which can change
rate/channel count).
These issues have not been observed in past but with new MTL based (Windows)
laptops and new topologies to enhance the audio quality, we started to see weird
issues around how our assumptions of vendors failed.
Since some NHLT blob handling cleanup has been done for 6.10, this series will
complete that work to cover even cases that we don't anticipate to see.
[1] https://github.com/thesofproject/linux/issues/4973
For RDMA Send and Write with IB_SEND_INLINE, the memory buffers
specified in sge list will be placed inline in the Send Request.
The data should be copied by CPU from the virtual addresses of
corresponding sge list DMA addresses.
Cc: stable@kernel.org
Fixes: 8d7c7c0eeb ("RDMA: Add ib_virt_dma_to_page()")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://lore.kernel.org/r/20240516095052.542767-1-honggangli@163.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When building a 32-bit kernel, some toolchains do not allow mixing soft
float and hard float object files:
LD vmlinux.o
powerpc64le-unknown-linux-musl-ld: lib/test_fpu_impl.o uses hard float, arch/powerpc/kernel/udbg.o uses soft float
powerpc64le-unknown-linux-musl-ld: failed to merge target specific data of file lib/test_fpu_impl.o
make[2]: *** [scripts/Makefile.vmlinux_o:62: vmlinux.o] Error 1
make[1]: *** [Makefile:1152: vmlinux_o] Error 2
make: *** [Makefile:240: __sub-make] Error 2
This is not an issue when building a 64-bit kernel. To unbreak the
build, limit ARCH_HAS_KERNEL_FPU_SUPPORT to 64-bit kernels. This is okay
because the only real user of this option, amdgpu, was previously
limited to PPC64 anyway; see commit a28e4b672f ("drm/amd/display: use
ARCH_HAS_KERNEL_FPU_SUPPORT").
Fixes: 01db473e1a ("powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405250851.Z4daYSWG-lkp@intel.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/eeffaec3-df63-4e55-ab7a-064a65c00efa@roeck-us.net/
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240529162852.1209-1-samuel.holland@sifive.com
The 'ld' instruction requires a 4-byte aligned displacement because it
is a DS-form instruction. But the "m" asm constraint doesn't enforce
that.
Add a special case of __get_user_asm2_goto() so that the "YZ" constraint
can be used for "ld".
The "Z" constraint is documented in the GCC manual PowerPC machine
constraints, and specifies a "memory operand accessed with indexed or
indirect addressing". "Y" is not documented in the manual but specifies
a "memory operand for a DS-form instruction". Using both allows the
compiler to generate a DS-form "ld" or X-form "ldx" as appropriate.
The change has to be conditional on CONFIG_PPC_KERNEL_PREFIXED because
the "Y" constraint does not guarantee 4-byte alignment when prefixed
instructions are enabled.
No build errors have been reported due to this, but the possibility is
there depending on compiler code generation decisions.
Fixes: c20beffeec ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240529123029.146953-2-mpe@ellerman.id.au
Building ppc64le_defconfig with GCC 14 fails with assembler errors:
CC fs/readdir.o
/tmp/ccdQn0mD.s: Assembler messages:
/tmp/ccdQn0mD.s:212: Error: operand out of domain (18 is not a multiple of 4)
/tmp/ccdQn0mD.s:226: Error: operand out of domain (18 is not a multiple of 4)
... [6 lines]
/tmp/ccdQn0mD.s:1699: Error: operand out of domain (18 is not a multiple of 4)
A snippet of the asm shows:
# ../fs/readdir.c:210: unsafe_copy_dirent_name(dirent->d_name, name, namlen, efault_end);
ld 9,0(29) # MEM[(u64 *)name_38(D) + _88 * 1], MEM[(u64 *)name_38(D) + _88 * 1]
# 210 "../fs/readdir.c" 1
1: std 9,18(8) # put_user # *__pus_addr_52, MEM[(u64 *)name_38(D) + _88 * 1]
The 'std' instruction requires a 4-byte aligned displacement because
it is a DS-form instruction, and as the assembler says, 18 is not a
multiple of 4.
A similar error is seen with GCC 13 and CONFIG_UBSAN_SIGNED_WRAP=y.
The fix is to change the constraint on the memory operand to put_user(),
from "m" which is a general memory reference to "YZ".
The "Z" constraint is documented in the GCC manual PowerPC machine
constraints, and specifies a "memory operand accessed with indexed or
indirect addressing". "Y" is not documented in the manual but specifies
a "memory operand for a DS-form instruction". Using both allows the
compiler to generate a DS-form "std" or X-form "stdx" as appropriate.
The change has to be conditional on CONFIG_PPC_KERNEL_PREFIXED because
the "Y" constraint does not guarantee 4-byte alignment when prefixed
instructions are enabled.
Unfortunately clang doesn't support the "Y" constraint so that has to be
behind an ifdef.
Although the build error is only seen with GCC 13/14, that appears
to just be luck. The constraint has been incorrect since it was first
added.
Fixes: c20beffeec ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()")
Cc: stable@vger.kernel.org # v5.10+
Suggested-by: Kewen Lin <linkw@gcc.gnu.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240529123029.146953-1-mpe@ellerman.id.au
It's not an error or exceptional situation when the hosting
environment does not expose a name for the LP/guest via RTAS or the
device tree. This happens with qemu when run without the '-name'
option. The message also lacks a newline. Remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: eddaa9a402 ("powerpc/pseries: read the lpar name from the firmware")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240524-lparcfg-updates-v2-1-62e2e9d28724@linux.ibm.com
Do not try to handle admin command completion if it has an unexpected
command id and print a relevant error message.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yehuda Yitschak <yehuday@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20240513064630.6247-1-mrgolin@amazon.com
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement user requests to create and destroy an RC QP.
As the user does not have an FMR queue, it is skipped and NO_FMR flag
is used.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1716366242-558-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement HW requests to create and destroy an RC QP.
An RC QP may have 5 queues.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1716366242-558-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
'num_vectors' is used to count the number of elements in the 'qv_info'
flexible array in "struct irdma_qvlist_info".
So annotate it with __counted_by() to make it explicit and enable some
additional checks.
This allocation is done in irdma_save_msix_info().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2ca8b14adf79c4795d7aa95bbfc79253a6bfed82.1716102112.git.christophe.jaillet@wanadoo.fr
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In case any of PCI BARs is missing during device probe we would like to
fail as early as possible. Fail if any of the required BARs isn't listed
as a memory BAR.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20240513081019.26998-1-mrgolin@amazon.com
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
bnxt_re no longer decide the number of MSI-x vectors used by itself.
Its decided by bnxt_en now. So when bnxt_en changes this value, system
crash is seen.
Depend on the max value reported by bnxt_en instead of using the its own macros.
Fixes: 3034322113 ("bnxt_en: Remove runtime interrupt vector allocation")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716195418-11767-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.
In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.
In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.
In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel
Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.
Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the duplicated code paths to check for single bit depth and to
update the params with storing the parameters needed by the function and
have a single code section.
No functional change but the code is easier to follow.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the sof_ipc4_copier_is_single_format() to
sof_ipc4_copier_is_single_bitdepth() to clear the confusion of the use of
'format' when we are querying information on the bit depth.
Format is used to describe a combination of parameters (rate, channels,
sample format / bit depth).
Rename the flags used to store the result at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print out the number of channels for the format explicitly instead of
having the reader to understand how to interpret the ch_map and ch_cfg
values.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.
As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.
Fixes: f9209644ae ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In intel_crtc_vblank_work(), we access uapi.event before grabbing the
event_lock spinlock, but modify it inside the spinlock block. This
causes some static analyzers to get confused and issue a warning.
The uapi.event value is not protected by the event_lock, so we can
safely move it out of the protected block to prevent false positives.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528112901.476068-3-luciano.coelho@intel.com
During static analysis, a concern was raised that we may access the
dtd->dtd[] array out of bounds, because we are not checking whether
the index we use is larger than the array.
This should not be a problem as is, because the enumeration that is
used for this index comes from "panel_type", which uses an enumeration
with 4 items. But if this enumeration is ever changed, it can lead to
hard-to-detect bugs, so better double-check it before using it as an
index to the array.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528112901.476068-2-luciano.coelho@intel.com
BNXT_RE_COMP_MASK_UCNTX_HW_RETX_ENABLED was introduced to share the HW
retransmit capability between driver and lib. The main difference in
implementation for HW Retransmit support is the usage of MSN table or
PSN table . When HW retrans is enabled, HW expects MSN table to be
allocated by driver/lib, else PSN table (for older adapters).
FW expose a new field which gives MSN capability. Drivers and libs can
depend on the new field instead of HW Retrasns capability. For
adapters which support HW_RETX feature, MSN table capability will be
set. For older adapters, this value will be 0(to maintain backward
compatibility with older FW).
Rename UAPI just to capture the correct name of the HW capability
that driver/library is interested in. No functional impact even if
older rdma-core is used.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716876697-25970-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
FW reports the HW capability to use PSN table or MSN table and
driver/library need to select it based on this capability.
Use the new capability instead of the older capability check for HW
retransmission while handling the MSN/PSN table. FW report
zero (PSN table) for older adapters to maintain backward compatibility.
Also, Updated the FW interface structures to handle the new fields.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716876697-25970-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Recent commit 0cfe71f45f ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f45f ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We fixed the incorrect UMP type for system messages in the recent
commit, but it missed one place in system_ev_to_ump_midi1().
Fix it now.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Fixes: c2bb79613fed ("ALSA: seq: Fix incorrect UMP type for system messages")
Link: https://lore.kernel.org/r/20240530101044.17524-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The handling of kfifo_out() errors in read functions obscures any error.
The error condition should never occur but, while a ret is set to -EIO, it
is subsequently ignored and the read functions instead return the number
of bytes copied to that point, potentially masking the fact that any error
occurred.
Log a warning and return -EIO in the case of a kfifo_out() error to make
it clear something very odd is going on here.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240529131953.195777-4-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The allocation of the linereq events kfifo is performed in two separate
places. Add a helper function to remove the duplication.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240529131953.195777-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The initialisation of the linereq events kfifo relies on the struct being
zeroed and a subsequent call to kfifo_alloc(). The call to kfifo_alloc()
is deferred until edge detection is first enabled for the linereq. If the
kfifo is inadvertently accessed before the call to kfifo_alloc(), as was
the case in a recently discovered bug, it behaves as a FIFO of size 1 with
an element size of 0, so writes and reads to the kfifo appear successful
but copy no actual data.
As a defensive measure, initialise the kfifo with INIT_KFIFO() when the
events kfifo is constructed. This initialises the kfifo element size
and zeroes its data pointer, so any inadvertant access prior to the
kfifo_alloc() call will trigger an oops.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240529131953.195777-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
rdc_gpio_config() uses pci_{read,write}_config_dword() that return
PCIBIOS_* codes. rdc_gpio_config() is used for
direction_{input,output}() in the struct gpio_chip which both require
normal errnos to be returned.
Similarly, rdc321x_gpio_probe() that is probe function returns
PCIBIOS_* codes without converting them first into normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning them to fix both issues.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240527132345.13956-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
amd_gpio_init() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is then returned as is but amd_gpio_init() is
a module init function that should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it from amd_gpio_init().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240527132345.13956-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some Dell laptops support configuration of preset fan modes through
smbios tables.
If the platform supports these fan modes, set up platform_profile to
change these modes. If not supported, skip enabling platform_profile.
Signed-off-by: Lyndon Sanche <lsanche@lyndeno.ca>
Link: https://lore.kernel.org/r/20240529174843.13226-4-lsanche@lyndeno.ca
[ij: Adjust #includes into alphabetical order]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the dell_send_request and dell_fill_request symbols into smbios-base
so that they can be used in multiple modules.
Signed-off-by: Lyndon Sanche <lsanche@lyndeno.ca>
Link: https://lore.kernel.org/r/20240529174843.13226-3-lsanche@lyndeno.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add helper that returns true if smbios command class is supported.
Signed-off-by: Lyndon Sanche <lsanche@lyndeno.ca>
Link: https://lore.kernel.org/r/20240529174843.13226-2-lsanche@lyndeno.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, we may bump into pll mismatch errors during the
state verification stage. This happens when we try to use
fastset instead of full modeset. Hence, we would need to add
a check for pipe configuration to ensure that the sw and the
hw configuration will match. In case of hw and sw mismatch,
we would need to disable fastset and use full modeset instead.
v2: Fix C10 error on PLL comparison (BAT)
Use memcmp instead of fixed loops for pll config
comparison (Jani)
Clean up and use intel_cx0pll_dump_hw_state() to dump
pll information (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240523134649.31452-3-mika.kahola@intel.com
Add timeout value to support self waking when timeout to avoid waiting
indefinitely.
Signed-off-by: Gavin Liu <gavin.liu@mediatek.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
-----BEGIN PGP SIGNATURE-----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=cexP
-----END PGP SIGNATURE-----
Merge tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 syzbot reports that nf_reinject() could be called without
rcu_read_lock() when flushing pending packets at nfnetlink
queue removal, from Eric Dumazet.
Patch #2 flushes ipset list:set when canceling garbage collection to
reference to other lists to fix a race, from Jozsef Kadlecsik.
Patch #3 restores q-in-q matching with nft_payload by reverting
f6ae9f120d ("netfilter: nft_payload: add C-VLAN support").
Patch #4 fixes vlan mangling in skbuff when vlan offload is present
in skbuff, without this patch nft_payload corrupts packets
in this case.
Patch #5 fixes possible nul-deref in tproxy no IP address is found in
netdevice, reported by syzbot and patch from Florian Westphal.
Patch #6 removes a superfluous restriction which prevents loose fib
lookups from input and forward hooks, from Eric Garver.
My assessment is that patches #1, #2 and #5 address possible kernel
crash, anything else in this batch fixes broken features.
netfilter pull request 24-05-29
* tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
netfilter: nft_payload: restore vlan q-in-q match support
netfilter: ipset: Add list flush to cancel_gc
netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu()
====================
Link: https://lore.kernel.org/r/20240528225519.1155786-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The maximum possible return value of find_next_zero_bit(fdt->full_fds_bits,
maxbit, bitbit) is maxbit. This return value, multiplied by BITS_PER_LONG,
gives the value of bitbit, which can never be greater than maxfd, it can
only be equal to maxfd at most, so the following check 'if (bitbit > maxfd)'
will never be true.
Moreover, when bitbit equals maxfd, it indicates that there are no unused
fds, and the function can directly return.
Fix this check.
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://lore.kernel.org/r/20240529160656.209352-1-yuntao.wang@linux.dev
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Decouple xe_lrc from xe_exec_queue and reference count xe_lrc.
Removing hard coupling between xe_exec_queue and xe_lrc allows
flexible design where the user interface xe_exec_queue can be
destroyed independent of the hardware/firmware interface xe_lrc.
v2: Fix lrc indexing in wq_item_append()
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530032211.29299-1-niranjana.vishwanathapura@intel.com
Do not hold xef->exec_queue.lock mutex while parsing the xarray
xef->exec_queue.xa in xe_file_close() as it is not needed and
will cause an unwanted dependency between this lock and the vm->lock.
This lock protects the exec queue lookup and reference taking which
doesn't apply to this code path. When FD is closing, IOCTLs presumably
can't be modifying the xarray.
v2: Update commit text (Matt Brost)
v3: Add more code comment (Rodrigo Vivi)
v4: Further expand code comment (Rodirgo Vivi)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529221639.23117-1-niranjana.vishwanathapura@intel.com
PROT_NONE is also useful information, so do not omit the mmap prot even
though it is 0. syscall_arg__scnprintf_mmap_prot() could print PROT_NONE
for prot 0.
Before: PROT_NONE is not shown.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0 -- ls
0.000 ls/2979231 syscalls:sys_enter_mmap(len: 4220888, flags: PRIVATE|ANONYMOUS)
After: PROT_NONE is displayed.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0 -- ls
0.000 ls/2975708 syscalls:sys_enter_mmap(len: 4220888, prot: NONE, flags: PRIVATE|ANONYMOUS)
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240522033542.1359421-3-changbin.du@huawei.com
For some parameters, it is best to also display them when they are 0,
e.g. flags.
Here we only check the show_zero property and let arg printer handle
special cases.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240522033542.1359421-2-changbin.du@huawei.com
The SHIFTphone 8 is an upcoming QCM6490 smartphone, it has the following
features:
* 12GB of RAM, 512GB UFS storage
* 1080p display.
* Hardware kill switches for cameras and microphones
* UART access via type-c SBU pins (enabled by an internal switch)
Initial support includes:
* Framebuffer display
* UFS and sdcard storage
* Battery monitoring and USB role switching via pmic glink
* Bluetooth
* Thermals
* Wifi
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240530-otter-bringup-v3-2-79e7a28c1b08@linaro.org
[bjorn: Fixed indent of block comments]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
